Phase separation and melting behavior in poly(ε‐caprolactone)‐epoxy blends cured by 3,3′‐dimethylmethylene‐di(cyclohexylamine)

The morphology and the melting behavior of poly(ε‐caprolactone)/epoxy blends (PCL/epoxy) have been investigated by SEM and DSC. The mechanism of phase separation varies with the curing temperature and PCL content, which can be deduced from the cured morphology of the blend. Higher temperature leads to lower blend viscosity and a higher curing rate, and the final morphology is determined by the competition of these two factors. The PCL melting behavior of the blend is influenced by the extent of phase separation and crystallization during curing. The dual melting behavior of the PCL blend can be ascribed to the interference of the epoxy, which results in the formation of less perfect PCL crystallites melted at lower temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3107–3114, 2003     

Preparation of highly branched polyethylene using (α‐diimine) nickel complex covalently supported on modified SiO2

Bis(4‐(4‐amine‐3,5‐diisopropylbenzyl)‐2,6‐diisopropylphenylimino) acenaphthene NiBr₂ (Catalyst I) was synthesized. The complex covalently supported on Et₃Al‐treated silica (SC) and used for ethylene polymerization was produced with cocatalyst of common inexpensive alkylaluminum compounds. Polyethylenes (PEs) with branching numbers of 12.94 (1000C) to 116.02 (1000C) were prepared in heptane. The polymerization conditions, such as the cocatalyst, Al/Ni ratio, and temperature, had significant effects on catalytic activity and properties of polyethylenes. Confirmed by high‐temperature ¹³C NMR, the polyethylenes synthesized contain significant amounts of not only methyl but also ethyl, propyl, butyl, pentyl, and other long branches (longer than six carbons). The branching degree of polyethylenes increased with temperature, while their molecular weight and melting point decreased correspondingly, resulting in linear semicrystalline to totally amorphous polymers. The formation of the branches could be illustrated by the chain walking mechanism, which controlled their specific spacing and conformational arrangements with one another. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 103: 1483–1489, 2007     

Copolymerization of ethylene/α‐olefins over (2‐MeInd)2ZrCl2/MAO and (2‐BzInd)2ZrCl2/MAO systems

Ethylene homopolymerization and ethylene/α‐olefin copolymerization were carried out using unbridged and 2‐alkyl substituted bis(indenyl)zirconium dichloride complexes such as (2‐MeInd)₂ZrCl₂ and (2‐BzInd)₂ZrCl₂. Various concentrations of 1‐hexene, 1‐dodecene, and 1‐octadecene were used in order to find the effect of chain length of α‐olefins on the copolymerization behavior. In ethylene homopolymerization, catalytic activity increased at higher polymerization temperature, and (2‐MeInd)₂ZrCl₂ showed higher activity than (2‐BzInd)₂ZrCl₂. The increase of catalytic activity with addition of comonomer (the synergistic effect) was not observed except in the case of ethylene/1‐hexene copolymerization at 40°C. The monomer reactivity ratios of ethylene increased with the decrease of polymerization temperature, while those of α‐olefin showed the reverse trend. The two catalysts showed similar copolymerization reactivity ratios. (2‐MeInd)₂ZrCl₂ produced the copolymer with higher M_w than (2‐BzInd)₂ZrCl₂. The melting temperature and the crystallinity decreased drastically with the increase of the α‐olefin content but T_m as a function of weight fraction of the α‐olefins showed similar decreasing behavior. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 928–937, 2000     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Interface formation of Ca with poly(p-phenylene α,α′-diphenyl vinylene) and poly(p-phenylene α-phenyl vinylene)

We have investigated the interface formation of Ca with poly(p-phenylene α,α′-diphenyl vinylene) (PPV-DP) and poly(p-phenylene α-phenyl vinylene) (PPV-P) using X-ray photoemission spectroscopy (XPS). Similarly to our earlier findings in metal/PPV interface formation, the O 1s peak shifted toward a lower binding energy as soon as Ca was deposited on to the polymers. This was accompanied by the formation of Ca? O, suggesting a chemical origin for the O 1s shift. By contrast, the C 1s peak shift toward a lower binding energy was observed relatively later, after about 4 Å of Ca deposition. At the same time, a new C 1s component became noticable at about ?1.5 eV relative to the initial C 1s peak. This component signifies the possibility of polymer disruption by the Ca atoms to form Ca? C species. The C 1s peak shift is attributed to Ca induced surface band bending and barrier formation as in the case of metal/PPV interface formation. The disruption of the polymer may also induce changes in the interface electronic states and contribute to the C 1s peak shift. From the intensity attenuation analysis, we conclude that the initial 15 Å of Ca overlayer is contaminated by the Ca? O and Ca? C species and the overlayer is pure beyond 15 Å of Ca coverage.     

A statistical study of poly(ε‐caprolactone) crystallinity in poly(ε‐caprolactone)–silica sol–gel materials and their in vitro calcium phosphate‐forming ability

Composite poly(ε‐caprolactone) (PCL)–silica materials for potential use in orthopaedic applications have been prepared by a sol–gel method using an experimental design approach to investigate the effect of synthesis variables, separately and together, on the physical form of the organic polymer. A combination of differential scanning calorimetry, X‐ray diffraction and Fourier‐transform infrared methods were used to obtain information on the arrangement of the organic polymer in the hybrid material. As our studies investigated the effect of synthesis variables simultaneously, it was possible to establish that the increase of tetraethyl orthosilicate (TEOS)/PCL and HCl/TEOS molar ratios decreased the poly(ε‐caprolactone) crystallinity and provided for a better mixing of the two phases. At a mechanistic level it was possible to show that increase in catalyst content affected the condensation of silicon containing species. In vitro calcium phosphate‐forming ability tests using the static biomimetic method have been carried out on selected PCL–silica sol–gels. In vitro bioactivity was only observed for PCL–silica sol–gel composites with high silica content (30% weight). Changes in catalyst levels had a smaller but still significant effect. Calcium phosphate formation on largely non‐porous surfaces is proposed to occur via the formation of a silica sol–gel layer, and is influenced by the topography and the chemistry of the materials surface. Copyright © 2003 Society of Chemical Industry     

Miscibility of block copolymers of poly(ε‐caprolactone) and poly(ethylene glycol) with poly(3‐hydroxybutyrate) as well as the compatibilizing effect of these copolymers in blends of poly(ε‐caprolactone) and poly(3‐hydroxybutyrate)

Atactic poly(3‐hydroxybutyrate) (a‐PHB) and block copolymers of poly(ethylene glycol) (PEG) with poly(ε‐caprolactone) (PCL‐b‐PEG) were synthesized through anionic polymerization and coordination polymerization, respectively. As demonstrated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) measurements, both chemosynthesized a‐PHB and biosynthesized isotactic PHB (i‐PHB) are miscible with the PEG segment phase of PCL‐b‐PEGs. However, there is no evidence showing miscibility between both PHBs and the PCL segment phase of the copolymer even though PCL has been block‐copolymerized with PEG. Based on these results, PCL‐b‐PEG was added, as a compatibilizer, to both the PCL/a‐PHB blends and the PCL i‐PHB blends. The blend films were obtained through the evaporation of chloroform solutions of mixed components. Excitingly, the improvement in mechanical properties of PCL/PHB blends was achieved as anticipated initially upon the addition of PCL‐b‐PEG. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2600–2608, 2001     

Properties of regenerated cellulose films plasticized with α‐monoglycerides

Regenerated cellulose (RC) films were plasticized with glycerol, glycerin α‐monobutyrate, glycerin α‐monocaproate, glycerin α‐monocaprylate, and glycerin α‐monocaprate. The structure and properties of the films were investigated by using Fourier transform IR, wide‐angle X‐ray diffraction, differential scanning calorimetry, scanning electron microscopy, and tensile tests. The experimental results showed that the addition of plasticizer enhanced the elongation at break, thermal stability, and crystallinity and lowered the tensile strength of the films. The formation of hydrogen bonds between the cellulose and plasticizers weakened the inter‐ and intra‐hydrogen bonds among cellulose molecules, leading to reduced tensile strength. These α‐monoglycerides have relatively good plasticizing effects. Compared with glycerol, the resistance against water washing of the synthesized compounds was significantly enhanced. With the increase of the carbochain length of the α‐monoglycerides, the plasticizing effect decreased but the resistance against water washing was enhanced. When the RC films were immersed in a 10% glycerin α‐monocaproate solution, the elongation at break increased to 15% and stayed at 14.8% after water washing. Glycerin α‐monocaproate might be better for plasticizing RC films than others. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3500–3505, 2003     

Transesterification in homogeneous poly(ε‐caprolactone)–epoxy blends

Transesterification has been investigated in poly(ε‐caprolactone) (PCL)–epoxy blends. In the hot melt process, the hydroxyl on diglycidyl ether of bisphenol‐A (DGEBA) monomers is too low to give a noticeable transesterification reaction. In the postcure process, model reactions reveal that the hydroxyls from a ring‐opening reaction are able to react with the esters of PCL. In the meantime, the PCL molecular weight decrease and its distribution becomes broader. Nuclear magnetic resonance spectra reveal that fraction of the tertiary hydroxyls converts to secondary hydroxyls. In the cured DGEBA–3,3′‐dimethylmethylene‐di(cyclohexylamine)–PCL blend, a homogeneous morphology is achieved. PCL segments are grafted onto the epoxy network after postcuring and result in the lower T_g observed in the differential scanning calorimetry thermogram. A higher transesterification extent also results in broader transition peaks by dynamic mechanical analysis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 75–82, 1999     

Cobalt(II) and nickel(II) complexes bearing mono(imino)pyridyl and bis(imino)pyridyl ligands: preparation,structure and ethylene polymerization/oligomerization behaviors

BACKGROUND: Ethylene oligomerization is the major industrial process to produce linear α‐olefins. Recently much work has been devoted to late transition metal catalysts used in this process, especially those with 2,6‐bis(imino)pyridyl dihalide ligands. Considering that most work has focused on simple modification to the substituents in imino‐aryl rings based on the symmetric bis(imino)pyridyl framework, here we expand this work to the asymmetric mono(imino)pyridyl ligands. RESULTS: The preparation, structure and ethylene polymerization/oligomerization behavior of series of mono(imino) pyridyl–MCl₂ and bis(imino)pyridyl–MX_n complexes are presented. The systematic studies were focused on the relationship between the catalytic behavior of these complexes for ethylene polymerization/oligomerization and reaction conditions, ligand structures, metal centers and counter‐anions. The influence of the coordination environment on catalyst behavior is also discussed. CONCLUSION: For mono(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the Cl^? counter‐anion, good activities ranging from 0.513 × 10⁵ to 1.58 × 10⁵ g polyethylene (mol metal)^?1 h^?1 atm^?1 are afforded, and the most active catalysts are those with methyl in both ortho‐ and para‐positions of the imine N‐aryl ring. For bis(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the SO₄^2? and NO₃^? counter‐anions, the low activities for ethylene oligomerization are in sharp contrast to those of their chloride analogues. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of fullerene grafted poly(ε‐caprolactone)

The fullerene grafted poly(ε‐caprolactone) (PCL) was successfully synthesized with a graft efficiency of 80%. The fullerene moieties grafted onto the PCL chain aggregate into 1–2 μm particles so that a physical pseudo‐network is formed. Because of the existence of the network structure, the fullerene grafted PCL film can retain its shape at much higher temperatures than that of pure PCL film, as observed in dynamic mechanical tests. It shows a hydrophobic gelling behavior in chloroform solution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

Mechanical relaxations of poly(β,L‐aspartate)s

The dynamic mechanical thermal properties of a family of poly(α‐alkyl β,L ‐aspartate)s bearing various cyclic, linear, and branched alkoxycarbonyl groups in the side chain were studied. The measurements carried out by dynamic mechanical thermal analysis (DMTA) revealed the significant influence of the constitution of the side chain on mechanical relaxation phenomena. Three relaxations were observed, which are referred to as γ, β, and α, in increasing order of temperature. The first two, γ and β, are related to the local and global motions of the side chain, respectively. Relaxation α is related to the motion of the main chain. Relaxation β, which is associated with the rotation of the side chain, is the most intense. The magnitude and temperature at which this relaxation occurs depends on the volume, the length, and the degree of branching of the ester group of the side chain. A comparison between the dynamic mechanical properties of poly(β,L ‐aspartate)s and poly(α,L ‐glutamate)s revealed that the two methylene groups spacing the ester group from the main chain provides the poly(α‐L ‐glutamate)s with greater mobility, and thus, relaxations α and β occur at lower temperatures. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 994–1003, 2006     

Effect of nucleating duality on the formation of γ‐phase in a β‐nucleated isotactic polypropylene copolymer

BACKGROUND: It is a challenge for polymer processing to promote the formation of γ‐phase under atmospheric conditions in isotactic polypropylene (iPP) copolymer containing chain errors. Incorporation of an α‐nucleator in iPP copolymer seems reasonable since it can enhance non‐isothermal crystallization. Up to now, however, the issue regarding a β‐nucleated iPP copolymer still remains unclear, which is the subject of this study. RESULTS: The results indicate that the γ‐phase indeed occurs in a β‐nucleated random iPP copolymer with ethylene co‐unit (PPR) sample and becomes predominant at slow cooling rates (e.g. 1 °C min^?1) where the formation of the β‐form is suppressed to a large extent. With detailed morphological observations the formation of γ‐phase in the β‐nucleated PPR sample at slow cooling rate is unambiguously attributed to the nucleating duality of the β‐nucleator towards α‐ and β‐polymorphs. The α‐crystals, induced by the β‐nucleator, serve as seeds for the predominant growth of the γ‐phase. Moreover, the presence of the β‐nucleator, acting as heterogeneous nuclei, promotes the formation of γ‐phase in the nucleated PPR sample, at least to some extent. CONCLUSION: The findings in this study extend our insights into the formation of γ‐phase in β‐nucleated iPP copolymer and, most importantly, provide an alternative route to obtain iPP rich in γ‐phase. Copyright © 2008 Society of Chemical Industry     

Chemical Synthesis of the Epimeric (23R)‐ and (23S)‐Fluoro Derivatives of Bile Acids via Horner–Wadsworth–Emmons Reaction

A method for the synthesis of two (23R)‐ and (23S)‐epimeric pairs of 23‐fluoro‐3α,7α,12α‐trihydroxy‐5β‐cholan‐24‐oic acid and 23‐fluoro‐3α,7α‐dihydroxy‐5β‐cholan‐24‐oic acid is described. The key intermediates, 23,24‐dinor‐22‐aldehyde peracetates were prepared from cholic and chenodeoxycholic acids via the 24‐nor‐22‐ene, 24‐nor‐22ξ,23‐epoxy, and 23,24‐dinor‐22‐aldehyde derivatives. The Horner–Wadsworth–Emmons reaction of the 23,24‐dinor‐22‐aldehydes using triethyl 2‐fluoro‐2‐phosphonoacetate in the presence of LiCl and 1,8‐diazabicyclo[5,4,0]undec‐7‐ene (DBU), and subsequent hydrogenation of the resulting 23ξ‐fluoro‐22‐ene ethyl esters, followed by hydrolysis, gave a mixture of the epimeric (23R)‐ and (23S)‐fluorinated bile acids which were resolved efficiently by preparative RP‐HPLC. The stereochemical configuration of the fluorine atom at C‐23 in the newly synthesized compounds was confirmed directly by the X‐ray crystallographic data. The ¹H and ¹³C NMR spectral differences between the (23R)‐ and (23S)‐epimers were also discussed.     

Poly‐α,β‐(3‐hydroxypropyl)‐DL‐aspartamide: A new drug carrier

Poly‐α,β‐(3‐hydroxypropyl)‐DL ‐aspartamide (PHPA) was synthesized by the ring‐open reaction of polysuccinimide (PSI) and 3‐hydroxypropylamine. The polymer was characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and GPC. Mark–Houwink coefficients were obtained from viscometry and GPC measurements, K = 5.53 × 10⁻³ and α = 0.78 in water. The acute toxicity of PHPA was examined and it revealed no death in ICR mice up to the dose treated of 15.3 kg/kg, and hematological parameters showed no significant difference between treated and control animals. The potential use of PHPA as a drug carrier was also investigated. In a typical case, a contraceptive drug, norethindrone (NET), was bonded to PHPA, and the drug sustained released as long as 120 days an in vitro test. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2411–2417, 2000     

Reorganization of the chain packing between poly(ethylene isophthalate) chains via coalescence from their inclusion compound formed with γ‐cyclodextrin

Amorphous poly(ethylene isophthalate) (PEI) was synthesized, and was used for preparing an inclusion compound (IC) with γ‐cyclodextrin (γ‐CD). Coalesced polymer was produced by washing the PEI‐γ‐CD‐IC with hot water. Wide angle X‐ray diffraction, Fourier transform infrared, and differential scanning calorimetry analyses were employed to verify formation of PEI‐γ‐CD‐IC and to compare the as‐synthesized and coalesced PEI samples. These observations suggested that the conformations and morphology/chain‐packing of PEI were changed via coalescence from its γ‐CD inclusion compound. The glass‐transition temperature of the amorphous coalesced PEI is 15–20°C higher than the T_g observed for the as‐synthesized sample, even when observed in the second heat after cooling from well above T_g at 260°C. The amorphous as‐synthesized PEI retains its randomly‐coiling structure, while coalesced PEI has at least partially retained, the highly extended and parallel chains from the narrow channels of the inclusion compound, resulting in better/tighter packing among the PEI chains manifested by a higher T_g. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6049–6053, 2006     

Hydrolytic degradation of poly(oxyethylene)–poly-(ε-caprolactone) multiblock copolymers

The degradation of poly(oxyethylene)–poly(ε-caprolactone) (POE–PCL) multiblock copolymers was investigated at 37°C in a 0.13M, pH 7.4 phosphate buffer selected to mimic in vivo conditions. The copolymers were obtained by coupling polycaprolactone diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. Various techniques, such as weighing, size exclusion chromatography, infrared, ¹H nuclear magnetic resonance, differential scanning calorimetry, and X-ray diffractometry, were used to monitor changes in total mass, water absorption, molar mass, thermal properties, degree of crystallinity, and composition. The results showed that introduction of POE sequences considerably increased the hydrophilicity of the copolymers as compared with PCL homopolymers. Nevertheless, the degradability of PCL sequences was not enhanced due to the phase separation between the two components. Significant morphological changes were also observed during the degradation. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 989–998, 1998     

Ring‐opening polymerization of ε‐caprolactone by a new yttrium complex: Y[2,2′‐ethylidene‐bis(4,6‐di‐tert‐butylphenoxy)]2(ethylene glycol dimethyl ether)Na(ethylene glycol dimethyl ether)3

The main aims of the work reported here were to synthesize and characterize a new 2,2′‐ethylidene‐bis(4,6‐di‐tert‐butylphenol) (EDBPH₂)‐based bimetal yttrium complex, Y(EDBP)₂(DME)Na(DME)₃ (1c; where DME is ethylene glycol dimethyl ether), which was employed as an efficient initiator for the ring‐opening polymerization of ε‐caprolactone (ε‐CL). From single‐crystal X‐ray diffraction, the solid structure of this new bimetal initiator was well established. Experimental results show that 1c initiates the ring‐opening polymerization of ε‐CL to afford poly(ε‐CL) with a narrow molecular weight distribution (M_w/M_n = 1.09–1.36, 65 °C). Based on an in situ NMR study, a plausible coordination–insertion mechanism is then proposed. The bimetal complex 1c can be used as an initiator for the ring‐opening polymerization of ε‐CL with some living characteristics. A study of the mechanism reveals that DME displacement in 1c by ε‐CL is involved in the initiation process and the propagation may proceed through three pathways by Na? O insertion or Y? O insertion. Copyright © 2009 Society of Chemical Industry