共查询到20条相似文献,搜索用时 125 毫秒
1.
AutoCAD 2000在建筑制图教学中的应用 总被引:1,自引:0,他引:1
针对建筑制图这门课的特点,结合AutoCAD2000的功能特性,本文通过实例论述了采用AutoCAD2000进行了建筑制图教学的优势。根据教学实践,提出了解决AutoCAD存在投影图与三维立体图不能同步绘制和显示的问题的两种图形处理方法。 相似文献
2.
笔者在多年从事计算机二维机械图绘制的过程中,发现以下几种能够提高绘图效率的方法往往被初学者忽视。这些方法在AutoCAD R14或AutoCAD2000中均可使用。1.直接距离法定点AutoCAD中确定点的方法有相对坐标、绝对坐标及点捕捉法,坐标输入方式有直角坐标或极坐标法。一般最常用 相似文献
3.
用VBA技术在AutoCAD2000下绘制矩阵位移法计算后的平面杆系结构的弯矩图,描述了三种单元荷载作用下的弯矩图的生成。在AutoCAD2000下生成的弯矩图可很方便地在打印机或绘图仪中输出。 相似文献
4.
5.
刘胜旋 《工程地质计算机应用》2003,(1):13-15,8
简单介绍了AutoCAD2000r VBA的系统内容和一些简单功能,VB是微软公司推出的可视化BASIC语言,用它来编程非常简单。Autodesk公司将VB的一部分代码结合到AutoCAD2000中,形成了VBA应用。利用VBA的强大计算功能和AutoCAD2000的强大绘图功能,在AutoCAD2000下编写VBA程序,可以成倍地提高工作效率。 相似文献
6.
组件化是现代开放软件系统的重要特征之一。本文介绍了ADS和ARX环境下的AutoCAD二次开发方法,着重论述了基于AutoCAD的组件化程序设计方法。通过对有限元建模软件AutoFEM结构体系的剖析,说明了组件化程序设计方法的具体实现与意义。 相似文献
7.
8.
陶海燕 《计算机应用与软件》2012,(1):67-69
以AutoCAD为几何平台,并利用其提供的二次开发技术实现了有限元前处理系统的编程。该方法解决了常规的有限元分析系统中的几何建模系统和前处理系统脱节的问题。集成了造型、单元属性设置、网格划分、显示等多种模块。研究了有限元前处理系统的若干关键技术,包括如何控制网格形态、输出求解数据接口、基于ObjectARX的CAD/CAE集成设计、复杂三维实体的四面体网格全自动生成算法。建立了一个基于AutoCAD的有限元前处理系统。 相似文献
9.
10.
运用计算机进行温度应力分析是控制大体积钢筋混凝土施工中常见的温度裂缝的有效手段,为了提高温度应力分析的计算精度,需要在计算机中建立考虑混凝土施工过程的结构模型。文章提出了能动态反映施工过程的4D模型及其建模方法,并在AutoCAD2000的平台上作了具体实现。 相似文献
11.
八节点六面体有限元网格自动消隐技术 总被引:1,自引:0,他引:1
文章基于图形消隐技术,利用C语言,开发了一套有限元网格与AutoCAD之间进行图形交换的软件系统,并利用该系统将三维有限元网格数据以3D表面的数据格式生成DXF文件.通过AutoCAD直接打开该DXF文件,然后利用AutoCAD提供的消隐功能对三维有限元网格进行自动消隐,从而提高了大量数据的显示能力,并且省去了消隐的复杂编程工作. 相似文献
12.
总结、整理数据是测试工作的一个重要环节,使用AutoCAD将数据图形化显示更加直观形象,但直接利用Auto-CAD来绘制大量的测试曲线枯燥烦琐,效率低下。本文应用ObjectARX编程技术,结合生成脚本文件的方法,提出了绘制大量曲线的方案,开发了AutoCAD曲线自动生成专用软件,给出了该软件的基本结构和实现方法。软件试用结果表明了该方案的实用性和有效性,并具有推广价值。 相似文献
13.
14.
卢佳祺 《电脑编程技巧与维护》2011,(8):16-17
工程曲线在机械设计中有着很广泛的应用,而AutoCAD中不能直接应用函数或数据绘制工程曲线,给科研和教学工作带来很大不便,现在也很少有专门绘制工程曲线的软件。为了解决这个问题,利用面向对象的VC++编程语言编写了一个专用软件来绘制各种工程曲线,这样可以解决AutoCAD不能绘制工程曲线的问题,给科研、教学都带来些方便。 相似文献
15.
本文利用AutoCAD与高级语言的接口--*.DXF绘图交换文件来生成各种函数曲,取得了很好的效果,与直接应用AutoCAD及高级语言编制的程序绘衅相比,它功能强,绘图质量高,且简单易于掌握。 相似文献
16.
Partitioning design space for linear tuning of natural frequencies in planar dynamic MEMS structures
《Sensors and actuators. A, Physical》2006,125(2):304-312
One of the critical design considerations in dynamic microelectromechanical systems (MEMS) devices is the structural natural frequency of the sensing or actuation element. Most dynamic MEMS devices employ planar geometry using an assembly of beams and plates for the structural elements. Most often the goal is to place the first resonant frequency at a desired value. Since the frequency depends on mass and stiffness of the structure, designing for frequency usually requires FEM analysis of the structure. FEM calculations are intensive, depend on many subtle modelling assumptions, and require huge number of simulations to build intuition. Since the design space for such structures is fairly high dimensional, tuning the frequency of the first-cut design can be a fairly intensive optimization computation. Here, we present a lumped parameter spring-mass model for a typical microstructure consisting of a plate and beams and show how the higher dimensional geometric design space can be partitioned to effect desired frequency changes in the structure linearly with the chosen design variables. In particular, four sets of design variables are considered and their effective range and sensitivity for linear tuning of the natural frequency is presented. We include the effect of residual stress on stiffness and show how the values of residual stress affect the tuning of the natural frequency with respect to the selected design variables. All results are compared with FEM calculations and a table is presented for cross comparison of efficacy of the different design variables. The goal is to present a simple analysis that can be easily followed by MEMS designers with any background and build their intuition for such designs. 相似文献
17.
融合腰椎的CT、MRI的影像解剖结构特征,应用图像分割及三维重建算法建立了精确的腰椎几何模型。在几何模型的基础上建立L1-L2的腰椎段的有限元模型。应用有限元计算方法研究了腰椎段的应力应变分布规律。构建的模型具有比较精确的解剖结构,能够较好地揭示在体腰椎段的应力应变变化特征。该模型为腰椎段的手术图像指导和仿真奠定了理论基础。 相似文献
18.
一种大型三维有限元网格的显示和高效消隐方法 总被引:4,自引:0,他引:4
本文提出了一种面向AutoCAD的大型三限元网格的显示和高效消隐方法,可实现8-20个节点三维正确显示,并大大节省消隐的运算时间。 相似文献
19.
Huichao Shi Shangchun Fan Weiwei Xing Cheng Li Jinhao Sun 《Microsystem Technologies》2014,20(6):1141-1152
In this paper, we established the vibration model of double-clamped resonant beam with slit structure, and we theoretically analyzed the effect of rectangular slits with round corners on vibration amplitude and natural frequency of the resonant beam. The effect of rectangular slits on detection sensitivity of resonant beam is also analyzed. According to the theoretical analysis, computational studies of slit size and location influence on vibration amplitude, natural frequency and detection sensitivity of the resonant beam were carried out. Meanwhile, stress concentration of proposed slit structure with rounded corners was calculated by finite element method (FEM) and was compared with the stress concentration of slit with right corners. Finally, for resonant beams with slits of different size and location, theoretical calculation results and the FEM simulation results of natural frequency were compared. Theoretical analysis and FEM simulation are in good agreement. 相似文献