共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
对乙酸直接加氢制乙醇技术领域专利技术的国内外申请态势进行了全面深入的分析,包括专利申请趋势、主要申请人、申请国家分布、重点专利的分析,以期乙酸直接加氢制乙醇的专利技术现状,为我国专利申请人今后确定研发方向和制定专利保护策略提供了参考。 相似文献
4.
介绍近年我国轮胎市场走势、轮胎企业专利申请情况和专利侵权诉讼情况。从专利申请、类型、专利诉讼、市场变化与政策导向方面分析轮胎行业专利现状,并从自主研发、委托开发/合作开发、广告宣传、专利许可/被许可、转让/受让、侵权投诉方面提出专利保护策略。世界龙头轮胎企业的专利以发明专利为主,外观设计专利其次,实用新型专利较少。我国轮胎企业在专利申请量和技术领域分布上均与国外企业有较大差距,应积极响应国家知识产权保护政策,加大创新力度;遇到侵权投诉时或者发现他人侵权时,应积极应对,寻求知识产权专业律师的帮助。 相似文献
5.
6.
7.
8.
9.
采用国家知识产权局知识产权出版社专利信息分析系统,检索中国专利数据库,从专利申请总量、发明专利申请量及其IPC分布等方面分析了我国建筑卫生陶瓷产业主要竞争者(前10位专利申请人)的专利情况.结果显示,建筑卫生陶瓷产业专利申请相当集中,申请量排名前10位的专利申请人的专利申请数量占专利申请总量的近三分之一,而且绝大多数专利申请为外观设计,说明建筑卫生陶瓷产业是相当成熟的传统产业;因建筑卫生企业多为民营企业,多数专利申请人为公司董事长或总裁,反映了建陶企业掌握了一定的专利申请策略;专利申请人前10强分布在广东佛山、上海、苏州和杭州,但技术与设计创新领域各不相同.这些分析数据为我国建筑卫生陶瓷企业了解竞争对手的专利现状、制定相应的发展战略提供了有益参考. 相似文献
10.
1992年以来,各种类型专利申请的国外申请量和国内申请量逐年上升,国内和国外申请的增长幅度基本相同。农药组合物申请量提高的比率低于新化合物申请量提高的比率。介绍了我国农药领域专利保护的发展进程、农药领域号利申请的类型以及对国外进行专利保护的一些特点,分析了有机化学品和农药发明专利申请的发展趋势,指出了在我国农药专利申请中应注意的问题。 相似文献
11.
本文对国内有关聚酰亚胺复合材料技术的公开专利进行了检索分析。主要从年度专利申请量、申请人所属国专利申请量、职务状况专利申请量、专利申请类别分布、法律状态、主要申请人专利申请数量和技术分类专利申请量概况等7个方面进行了数据整理,了解了耐高温聚酰亚胺树脂及其复合材料技术方面的知识产权现状,明确了该技术的研究热点并展望了其发展趋势。 相似文献
12.
13.
简要介绍仪征化纤 45万tPTA装置的杜邦工艺 ,通过优化工艺、设备改进、节能降耗、系统控制等方面阐述了该装置的技术特点。 相似文献
14.
为了解氯化法钛白粉相关生产技术的知识产权环境,降低企业知识产权风险,采用Innography专利分析平台对国内外氯化法钛白粉生产技术的专利申请进行了统计分析,并重点介绍了该技术在中国的相关专利布局情况。经研究分析发现:氯化法钛白粉生产技术的相关专利申请主要分布在美国、日本、德国、英国和中国;美国杜邦公司在氯化法钛白粉生产工艺的专利技术上有明显的优势;在中国,攀钢集团锦州钛业有限公司在氯化法钛白粉生产技术方面已形成相对完整的专利布局。最后,结合国内情况,给拟发展氯化法钛白粉的企业提出一些参考意见。 相似文献
15.
Eric T. Johnson 《应用聚合物科学杂志》1992,44(11):1905-1911
Films of a BTDA–mPDA–ODA polyimide copolymer (DuPont Pyralin PI-2555) were spincoated onto silicon wafers and cured at either 300 or 350°C. Films cured at each temperature were then analyzed by various pyrolysis mass spectrometric methods. Low-temperature pyrolysis mass spectrometry showed that polyimide films cured at the lower temperature contained more residual water and N-methyl pyrrolidone solvent than did the films cured at the higher temperature. High-temperature pyrolysis mass spectrometry of the two samples showed subtle differences in the mass spectrum of the polyimide pyrolysate under electron impact (EI) ionization conditions. Principal components analysis was used to differentiate between the EI mass spectra of the high-and low-temperature cured films. Several pyrolysis products, primarily aromatic hydrocarbon and heterocyclic fragments, were separated and identified by gas chromatography/mass spectrometry. 相似文献
16.
17.
对在中国申请的ZSM-5分子筛相关专利进行分析,从专利申请和公开趋势、专利申请人和发明人、专利IPC分类以及专利地图方面研究了ZSM-5分子筛相关中国专利的现状和特点。ZSM-5分子筛相关中国专利申请经历了萌芽期和快速发展期,直到近几年专利申请的增长率才有所放缓。中国申请人的专利总量占有绝对优势,但中国申请人的专利保护范围较窄,而且中国的高价值专利大部分掌握在外国申请人的手中,尤其是美国。通过IPC分类分析和专利地图文本聚类分析,得出ZSM-5分子筛相关专利布局的热点区域,以及美国埃克森美孚公司、荷兰国际壳牌研究有限公司和沙特基础工业公司这三家主要外国企业在我国的专利布局情况。 相似文献
18.
当前世界各国对环境保护和绿色发展的重视程度日益提升,离子液体因其优良的理化性能和可设计性,在能源、材料以及环境等众多领域展现出广阔的应用前景。基于全球专利信息,对离子液体领域三类热点应用,包括CO2捕集及利用、电化学储能和生物质转化利用的全球专利申请趋势、申请地域、重要专利权人、重点技术等情况进行国内外的比较研究。研究结果表明,离子液体技术分类布局广泛,尤其是催化分离的相关专利充足。中国在离子液体领域的专利申请量多,但专利权人以高校或科研机构为主,专利转化应用和保护力度不足。因此建议中国离子液体领域加强科研机构与新型能源/环保科技公司合作,向动力电池、碳捕集、生物基材料、废水处理、空气净化等方面开展转化和深度应用。 相似文献
19.
A one-dimensional devolatilization model is developed for autoclave processing of themroplastic polyimide, graphite-reinforced, composites. The model rests on the assumption that continous gas passages are formed during processing due to partical crystallization of the polymer in the course of polymerization. Both DSC and optica microscopy indicate that crystallinity develops in the Avimid-III polyimide resin during polymerization, which in turn facilitates formation of cracks. These cracks heal upon removal of volatiles and polymer melting. Model-Calculated temperature profiles in the laminate during polymerization, and the predicted removal rates of volatile species (water, ethanol, NMP) are compared to experimental miniautoclave data for the DuPont Avimid K-III/IM6 system. Good agreement is obtained when the volumetric mass transfer coefficient required by the model is assumed to vary proportionally to the inverse of the changing resin viscosity. The model allows the investigation of desired cure cycle parameters for different laminate thicknesses. 相似文献
20.
Corey L. Bungay Thomas E. Tiwald Michael J. Devries Brad J. Dworak John A. Woollam 《Polymer Engineering and Science》2000,40(2):300-309
Materials deployed on long‐duration space missions such as the Hubble Space Telescope (HST) and the proposed International Space Station (ISS) are subject to high ultraviolet (UV) radiation fluences. Some UV radiation present in space has photon energy high enough to dissociate organic polymer molecular bonds. Induced chemical structure modifications can cause changes in optical, structural, and thermal properties. The present work investigates UV radiation effects on DuPont Kapton® H polyimide, polyarylene ether benzimidazole (PAEBI), and DuPont Teflon® fluorinated ethylene‐propylene (FEP). UV irradiated polymers were characterized with in situ and ex situ spectroscopic ellipsometry (SE). Ellipsometric data acquired on UV modified polymers were best modeled as an exponentially graded layer, as opposed to a single layer or linearly graded layer model. Because photon intensity decays exponentially as a function of depth into absorbing materials, an exponentially graded model should be the most physically realistic. Ellipsometric data provided information about changes in UV absorption spectra, depth of damage, and growth trends in the damaged layer. 相似文献