Angled Split-Ring Artificial Magnetic Conductor for Gain Enhancement in Microstrip Patch Antenna for Wireless Applications

A multiband rectangular microstrip patch antenna integrated with angled split- ring artificial magnetic conducting (AMC) structure is proposed. In order to achieve high gain, directivity and radiation efficiency, an \(3\times 2\) array of proposed angled split-ring patches which has multiple in-phase reflection phase characteristics at S-band (2–4 GHz) is presented as a reflector. A rectangular microstrip patch antenna integrated with the proposed angled split-ring AMC is fabricated, tested and its parameters are compared with the microstrip patch antenna backed with a flat metal sheet, and microstrip patch antenna integrated with conventional split-ring AMC structure. The presence of high scattered field amplitude between the angled arms lead to improved radiation characteristics and make the antenna more suitable for real-time wireless applications. The antenna attains 2.138 dBi increment in gain and 1.87 dBi increment in directivity when it is backed with the proposed angled split-ring artificial magnetic conducting structure instead of a flat metal sheet. A good pact is obtained between the simulated and the measured results.     

Integrated active antenna array using unidirectional dielectricradiators

In this paper, design considerations and experimental investigations of an integrated active antenna for space power combining that makes use of unidirectional dielectric radiators (UDRs) are presented and discussed. Attractive electrical performance stemming from proprieties of nonradiating dielectric waveguide structures is used to design a prototype at a frequency of 14 GHz. A UDR feed circuit is implemented by microstrip lines and aperture-coupling is studied experimentally for arrays of two, four and eight radiators. Measurements show high coupling and radiation efficiencies of the proposed excitation method. A power-combining efficiency of 89% was measured and a gain of 23.1 dBi was achieved for an antenna with eight radiators and four amplifiers. It is also shown that such a circuit configuration allows the combination of planar Ku-band monolithic hybrid microwave integrated circuit and UDR components in flexible design of active array antennas     

Photodiode-integrated microstrip antenna array for subterahertz radiation

The radiation characteristics of subterahertz (sub-THz) electromagnetic waves emitted from an antenna array integrated with photodiodes are investigated. The element of the fabricated array antenna was a 300-GHz microstrip antenna integrating a uni-traveling carrier photodiode. It was observed that the beamwidth of a 3 /spl times/ 1 antenna array is about half that of the single microstrip antenna. We also confirmed that the radiation direction changed by 20/spl deg/ when 2/spl pi//5 of phase difference was added to the input optical signal for each antenna element. These results demonstrated that sub-THz waves emitted by each element of the array were coherently superimposed and the power combining of the sub-THz radiation occurred in the microstrip antenna array. The measured output power of each radiation element is about 120 /spl mu/W, and a total output power of 1 mW can be estimated for a fabricated 3 /spl times/ 3 array in an ideal radiation condition.     

Electric-field distribution near rectangular microstrip radiatorsfor hyperthermia heating: theory versus experiment in water

A rectangular microstrip antenna radiator is investigated for its near-zone radiation characteristics in water. Calculations of a cavity model theory are compared with the electric-field measurements of a miniature nonperturbing diode-dipole E-field probe whose 3 mm tip was positioned by an automatic three-axis scanning system. These comparisons have implications for the use of microstrip antennas in a multielement microwave hyperthermia applicator. Half-wavelength rectangular microstrip patches were designed to radiate in water at 915 MHz. Both low (epsilon r = 10) and high (epsilon r = 85) dielectric constant substrates were tested. Normal and tangential components of the near-zone radiated electric field were discriminated by appropriate orientation of the E-field probe. Low normal to transverse electric-field ratios at 3.0 cm depth indicate that the radiators may be useful for hyperthermia heating with an intervening water bolus. Electric-field pattern addition from a three-element linear array of these elements in water indicates that phase and amplitude adjustment can achieve some limited control over the distribution of radiated power.     

A new aperture coupled microstrip slot antenna

A new aperture coupled design is proposed for microstrip slot antennas to improve their radiation performance. The proposed design is based on a new aperture coupling technique in which the slot is fed by a microstrip line and coupled to several parasitic patch radiators etched on the opposite side from the slot. In contrast to the combination of a slot and a microstrip patch in conventional aperture coupled microstrip antennas, the patches here are employed to reduce the radiation into the half-space that they occupy and increase the radiation in the other half-space. Therefore, the slot antenna can produce radiation patterns with a high front-back ratio. The above objective is achieved by optimizing standing wave distributions of the aperture electric field in the slot through the adjustment of the position of the patches along the axis of the slot. In this paper, design considerations are given, and the results are validated by numerical simulations and experimental measurements.     

A new design of horizontally polarizedand dual-polarized uniplanar conical beam antennas for HIPERLAN

It is shown that a conical beam 5.2-GHz antenna suitable for HIPERLAN application, but working in horizontal polarization, can be realized as a group of microstrip patch radiators in a ring formation. Layouts with three and four patches are described, and radiation patterns are found to agree well with predictions from a simple array model. The three-patch form is smaller and gives a closer approximation to an azimuth-independent pattern. Patterns are very similar to those achieved in vertical polarization with previously reported disk antenna realizations, giving peak radiation at about 50/spl deg/ elevation. Two methods of impedance matching are found to give satisfactory results. A dual-polarized conical-beam microstrip antenna, with a strictly uniplanar conductor pattern, is also presented and realized as an array of three square patches whose corners meet a central feed point. For the second polarization, the antenna functions as a series fed array. Fairly good conical beam patterns have been obtained, though only moderate polarization purity appears to be obtainable from three-element arrays.     

非规则曲面共形阵列的优化设计

该文对一个共形在非规则曲面上的H形微带阵列进行了优化及设计。采用自适应混合遗传算法对此共形阵列的辐射方向图进行了优化设计。优化后的辐射方向图在水平方向几乎达到了全向辐射,俯仰面方向图集中辐射在水平方向。最后考虑到相位误差,对优化结果进行了误差分析。结果表明,该文所提出的优化算法对于非规则曲面上共形阵列的设计是有效和可行的。     

Accurate Analysis of Planar Microstrip Antenna Array

For the microstrip patch resonator, as a planar antenna of a microstrip, a set of equations that represents the electromagnetic fields in the x and z direction as function of the electric field in the y direction are obtained applying the TTL method. This method is very suitable at microwave and antenna applications, and gives accurate complex resonant frequency, which contributes definitively to obtain higher precision antenna parameters. For each type of array is calculated the array factor, considering the excitation, phase and the relative displacement between the elements as well as the dimensions and number of elements.     

Full-wave simulation,design and implementation of a new combination of antenna array feed network integrated in low profile microstrip technology

In this paper, a new modified combination of antenna and array feed network integrated in low thickness microstrip technology is presented. A concept similar to the concept of coherently radiating periodic structures is used to feed a 4-element antenna array. In the feed network, a new combination of Gysel-based 3 and 5 port components as power dividers/combiners is employed to propagate the power into the antenna array so that the desired Gaussian-like amplitudes and linear phase distributions can be obtained. These multi-port components are modified to design the feed network by single-layer microstrip technology without the matching and isolation circuits and through-substrate vias. Therefore, the manufacturing cost and difficulty and design complexity are reduced, considerably. Full-wave simulations of the feed network, unit cells and the final integrated antenna array are done, step by step and the results considering all possible losses are presented. To validate the designs, two prototypes, first the feed network and second the integrated module including both antenna array and feed network designed at 3.5 GHz were fabricated and measured and the S parameters (amplitude and phase) were compared with the full-wave simulations. A good agreement between the results including impedance and radiation characteristics is shown.     

Characteristics of switchable ferrite microstrip antennas

Switchable antennas consisting of microstrip elements with an in-plane biased ferrite cover layer are introduced. Their radiation and radar cross section (RCS) properties are examined through a full-wave moment-method analysis. For microstrip antennas with a ferrite cover layer, the presence of a decaying extraordinary wave in the ferrite layer can reduce or prohibit incident fields from reaching the antenna resulting in significant RCS reduction. For antenna radiation, most of the power will be converted into magnetostatic waves and little radiates into the air. Under such circumstances, the antennas are “off,” in the sense that they are effectively absent as radiators or scatterers. The aim of this paper is, through the use of an accurate full-wave analysis, to investigate the properties of the switchable microstrip antennas. Both the cases of strip dipoles and rectangular patches are analyzed. The effects of the cover-layer thickness, bias-field strength, and the existence of both ordinary and extraordinary waves on the switchable antenna properties are discussed     

一种可用于相控阵的双点馈多层圆极化微带天线

设计出了一种双背馈空气夹层微带圆极化天线单元,该天线单元具有13％的阻抗带宽,最大辐射方向上轴比2．5dB。用该天线单元以顺序旋转的方式组成四元阵,再用八个该天线单元和两组一分八功分器组成八单元阵列,研究了该阵列天线圆极化波束分别指向天线阵法向和偏转30°时的辐射特性和极化特性。该天线单元组阵圆极化轴比特性好,易于实现波束扫描,适合用于有源相控阵系统。     

馈电网络对微带天线阵列时域散射特性的影响

利用时域有限差分(FDTD)方法,研究了入射脉冲分别为水平和垂直极化时,探针馈电和微带馈电两种结构对于微带贴片阵列天线后向散射场的影响.给出了散射场的时域波形以及频谱特征.结果表明:微带天线阵列的每个贴片都通过馈电探针直接端接负载时,阵列的散射场峰值和能量都有所减小;而阵列通过馈电网络进行馈电时,馈电网络末端有无端接负...     

Fixed-Beam Frequency-Tunable Phase-Reversal Coplanar Stripline Antenna Array

A fixed-beam frequency-tunable coplanar stripline (CPS) antenna array using the phase reversal technique and varactor diodes tuning is presented. The antenna array is composed of plurality of half-wavelength CPS sections interconnected by phase reversing crossovers. These crossovers have two functions: they serve as the radiators (small dipoles) of the array and also provide their own required in-phase excitations for broadside radiation. Two microstrip-to-CPS transitions for excitation of the balanced input/output antenna array are implemented and compared. A six-element array is demonstrated theoretically and experimentally, with 9.3 dBi of gain for bidirectional radiation and 12.5 dBi of gain for unidirectional radiation using a back reflector. Moreover, shunt varactor diodes are incorporated along the CPS structure to achieve frequency tuning through a bias voltage control while broadside radiation patterns remain fixed. The return loss and the radiation patterns at several frequencies are presented, and up to 50% tuning range is obtained. The proposed antenna array is simple and uniplanar with small lateral size, high radiation efficiency and high directivity. In addition, it uses a very simple biasing circuit with high DC-RF isolation. Its balanced input/output makes it suitable for RF system integration and active integrated antenna design.     

一种新型极化捷变有源微带天线阵

本文提出了一种新颖的极化捷变放大器型有源微带天线阵,只要在馈电端电控单一有源电路就能实现整个微带天线面阵极化的捷变和信号的放大.利用角馈方形微带贴片设计了一副具有高隔离度和低交叉极化的新颖16元双极化面阵,并分析了天线阵的共极化和交叉极化方向图.介绍了有源电路的设计.该电路利用一专用电控移相器,通过改变场效应管(FET)栅极的直流控制电压,电控两极化端口间的0°或90°相差,实现天线阵由线极化到圆极化的捷变.低噪声放大器(LNA)不仅使有源天线增益提高12-14dB,而且改善了天线的驻波比带宽和隔离度.文中给出了无源双极化阵和有源阵的实验结果,证实了理论的有效性.     

Hybrid-coupled broadband triangular microstrip antennas

Two broadband configurations consisting of three hybrid-coupled equilateral and isosceles triangular microstrip antennas have been proposed. Both configurations yield more than four times the bandwidth as compared with the corresponding single triangular microstrip antenna. The radiation pattern of a hybrid-coupled isosceles triangular microstrip antenna is in the broadside direction with very small variation over the entire bandwidth. In addition, this antenna has wide half power beamwidth, making it suitable as an element for the large scan broadband antenna array.     

Analysis of electromagnetic radiation from shaped-end radiatorsusing the finite difference time domain method

The finite difference time domain (FDTD) technique is a popular method for analyzing electromagnetic scattering, radiation, and penetration problems. Several authors have recently applied the FDTD method to antenna radiation problems. To date, the antenna structures considered have been wire and conical monopole antennas, rectangular waveguides, pyramidal horn antennas, and microstrip antennas. Results from these analysis have been in the form of normalized field patterns and no results showing absolute gain have been presented. The article demonstrates the first staircased application of the FDTD method to the analysis of radiation from circular waveguides and other shaped-end radiators. Results of absolute gain versus angle are shown for a straight-cut circular waveguide and for two different shaped-end radiators. All FDTD analyses are full three-dimensional computations and are compared in each case with measured data     

High‐gain polarization conversion metasurface

A novel analytical method based on the cavity mode theory to design a metasurface (MS) is proposed in this study. We carefully analyzed the phase and amplitude characteristics of the incident wave and transmitted wave, and successfully designed a circular polarization conversion MS by introducing a cutting structure with wider operation bandwidth and higher radiation direction gain compared with that of the original MS. For the measurements, a microstrip antenna operating at 2.4 GHz was used as the source antenna to verify the designed MS. The simulation and measurement results agree well with each other.     

基于小间距低耦合阵元的微带天线阵设计*

设计微带天线阵时,减小阵元间距会导致阵元间耦合增加,从而导致增益下降(在考虑口径增益减小的基础上进一步下降).针对该问题,提出一种减弱小间距阵元间耦合的新方法,即通过在地板上蚀刻两条共面波导,引入新的幅度可调的耦合去抵消原有耦合,从而实现减小阵元间耦合的目的.该方法将邻边间距为0.024λ0(λ0是自由波长,中心间距约0.38λ0)的阵元之间的隔离度(IS21I)从6.1dB提高到21dB以上,改善了阵元的辐射特性,使每个阵元的辐射方向图接近单个贴片的辐射方向图.为验证有效性,本文基于该方法设计了一副二元微带天线阵,并对其进行测试,与等口径面的二元阵比较,增益提高了约1.2dBi,与等增益的二元阵比较,面积减少了约10.2％,且副瓣电平有较大改善.     

A Double Rhombus Antenna Fed by 180$^{circ}$ Phase Shifter for Ultrawideband Phased Array Applications

A double rhombus antenna fed through a microstrip 180deg phase shifter is presented. The 180deg phase shifter is a novel design of microstrip-to-coplanar waveguide (CPW)-to-microstrip transition. The proposed phase shifter is obtained without changing the layer of the second microstrip line for an easy embedding into the feedline. Via holes are used to transfer the current from the top to the bottom substrate layer and vice versa. The antenna with the phase shifter is operating in a wide bandwidth from 5.7 and 18.6 GHz (106%), and provides stable endfire radiation patterns. This design is tested in a modified two-element array configuration and proved to have a wide usable bandwidth.     

Microstrip patch array antenna

A microstrip array with mutual coupled rectangular patch radiators is described. By the avoidance of a corporate feeding network, advantages in the antenna performance and design are realisable. Experimental results are presented for both linearly and circularly polarised antennas which demonstrate the usefulness of this special antenna configuration.