Fabrication and characterization of PEO/PPC polymer electrolyte for lithium‐ion battery

A new poly(propylene carbonate)/poly(ethylene oxide) (PEO/PPC) polymer electrolytes (PEs) have been developed by solution‐casting technique using biodegradable PPC and PEO. The morphology, structure, and thermal properties of the PEO/PPC polymer electrolytes were investigated by scanning electron microscopy, X‐ray diffraction, and differential scanning calorimetry methods. The ionic conductivity and the electrochemical stability window of the PEO/PPC polymer electrolytes were also measured. The results showed that the T_g and the crystallinity of PEO decrease, and consequently, the ionic conductivity increases because of the addition of amorphous PPC. The PEO/50%PPC/10%LiClO₄ polymer electrolyte possesses good properties such as 6.83 × 10^?5 S cm^?1 of ionic conductivity at room temperature and 4.5 V of the electrochemical stability window. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of well‐defined comb‐like amphiphilic copolymers with protonizable units in the pendent chains: 2. Poly(2‐(dimethylamino)ethyl methacrylate) grafted poly(methyl methacrylate‐co‐2‐hydroxyethyl methacrylate) copolymers and their association behavior in aqueous solution

Narrow‐distribution, well‐defined comb‐like amphiphilic copolymers are reported in this work. The copolymers are composed of poly(methyl methacrylate‐co‐2‐hydroxyethyl methacrylate) (P(MMA‐co‐HEMA)) as the backbones and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) as the grafted chains, with the copolymer backbones being synthesized via atom‐transfer radical polymerization (ATRP) and the grafted chains by oxyanionic polymerization. The copolymers were characterized by gel permeation chromatography (GPC), Fourier‐transform infrared (FT‐IR) spectroscopy and ¹H NMR spectroscopy. The aggregation behavior in aqueous solutions of the comb‐like amphiphilic copolymers was also investigated. ¹H NMR spectroscopic and surface tension measurements all indicated that the copolymers could form micelles in aqueous solutions and they possessed high surface activity. The results of dynamic light scattering (DLS) and scanning electron microscopy (SEM) investigations showed that the hydrodynamic diameters of the comb‐like amphiphilic copolymer aggregates increased with dilution. Because of the protonizable properties of the graft chains, the surface activity properties and micellar state can be easily modulated by variations in pH. Copyright © 2004 Society of Chemical Industry     

Solid polymer electrolytes based on nanocomposites of ethylene oxide–epichlorohydrin copolymers and cellulose whiskers

With the aim of developing ion‐conducting solid polymer electrolytes that combine high ionic conductivity with good mechanical properties, we prepared and investigated nanocomposites of LiClO₄‐doped ethylene oxide‐epichlorohydrin (EO‐EPI) copolymers and nanoscale cellulose whiskers derived from tunicates. We show that homogeneous nanocomposite films based on EO‐EPI copolymers, LiClO₄, and tunicate whiskers can be produced by solution‐casting THF/water mixtures comprising these components and subsequent compression‐molding. The Young's moduli of the nanocomposites thus produced are increased by a factor of up to >50, when compared to the copolymers, whereas the electrical conductivities experience only comparably small reductions upon introduction of the whiskers. The nanocomposite with the best combination of conductivity (1.6 × 10^?4 S/cm at room temperature and a relative humidity of 75%) and Young's modulus (7 MPa) was obtained with a copolymer having an EO‐EPI ratio of 84 : 16, a whisker content of 10% w/w, and a LiClO₄ concentration of 5.8% w/w. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2883–2888, 2004     

Synthesis and micellization behavior of amphiphilic graft copolymer with 1‐octene as hydrophobic moiety

Two new kinds of amphiphilic copolymers were synthesized in this work. Poly(1‐octene‐co‐acrylic acid) copolymers were prepared through the copolymerization of 1‐octene and tert‐butyl acrylate, and the hydrolysis of tert‐butyl acrylate units. Poly(1‐octene‐co‐acrylic acid)‐g‐poly (ethylene glycol) copolymers were obtained from the esterification reaction between poly(1‐octene‐co‐acrylic acid) and poly(ethylene glycol) monomethyl ether. They were characterized by means of ¹H‐NMR, ¹³C‐NMR, GPC, and FTIR. These amphiphilic copolymers can form stable micelles in aqueous solutions. The critical micelle concentration was determined by fluorescence spectroscopy. The micellar morphology and size distribution were investigated by transmission electron microscopy and dynamic light scattering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of amphiphilic temperature‐sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers and micellar characterization

Amphiphilic thermally sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers were synthesized by ring‐opening polymerization of tetramethylene carbonate with hydroxyl‐terminated poly(N‐isopropylacrylamide) (PNiPAAm) as macro‐initiator in the presence of stannous octoate as catalyst. The synthesis involved PNiPAAm bearing a single terminal hydroxyl group prepared by telomerization using 2‐hydroxyethanethiol as a chain‐transfer agent. The copolymers were characterized using ¹H NMR and Fourier transform infrared spectroscopy and gel permeation chromatography. Their solutions show reversible changes in optical properties: transparent below the lower critical solution temperature (LCST) and opaque above the LCST. The LCST depends on the polymer composition and the media. Owing to their amphiphilic characteristics, the block copolymers form micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range 1.11–22.9 mg L^?1. Increasing the hydrophobic segment length or decreasing the hydrophilic segment length in the amphiphilic diblock copolymers produces lower CMCs. A core‐shell structure of the micelles is evident from ¹H NMR analyses of the micelles in D₂O. Transmission electron microscopic analyses of micelle morphology show a spherical structure of both blank and drug‐loaded micelles. The blank and drug‐loaded micelles have an average size of less than 130 nm. Observations show high drug‐entrapment efficiency and drug‐loading content for the drug‐loaded micelles. Copyright © 2010 Society of Chemical Industry     

Preparation and performance study on P(St‐MMA)‐SiO2 doped P(VDF‐HFP) based composite polymer electrolyte

The organic–inorganic hybrid material poly(styrene‐methyl methacrylate)‐silica (P(St‐MMA )‐SiO₂) was successfully prepared by in situ polymerization confirmed by Fourier transform infrared spectroscopy and was employed to fabricate poly(vinylidene fluoride‐hexafluoropropylene) (P(VDF‐HFP )) based composite polymer electrolyte (CPE ) membrane. Desirable CPEs can be obtained by immersing the CPE membranes into 1.0 mol L^?1 LiPF₆‐EC /DMC /EMC (LiPF₆ ethylene carbonate + dimethyl carbonate + ethylmethyl carbonate) liquid electrolyte for about 0.5 h for activation. The corresponding physicochemical properties were characterized by SEM , XRD , electrochemical impedance spectroscopy and charge–discharge cycle testing measurements. The results indicate that the as‐prepared CPEs have excellent properties when the mass ratio of the hybrid P(St‐MMA )‐SiO ₂ particles to polymer matrix P(VDF‐HFP ) reaches 1:10, at which point the SEM analyses show that the as‐prepared P(St‐MMA )‐SiO ₂ particles are uniformly dispersed in the membrane and the CPE membrane presents a homogeneous surface with abundant interconnected micropores. The XRD results show that there may exist interaction forces between the P(St‐MMA )‐SiO ₂ particles and the polymer matrix, which can obviously decrease the crystallinity of the composite membrane. Moreover, the ionic conductivity at room temperature and the electrochemical working window of the CPE membrane can reach 3.146 mS cm^?1 and 4.7 V, respectively. The assembled LiCoO₂/CPE /Li coin cell with the CPE presents excellent charge–discharge and C ‐rate performance, which indicates that P(St‐MMA )‐SiO ₂ hybrid material is a promising additive for the P(VDF‐HFP ) based CPE of the lithium ion battery. © 2016 Society of Chemical Industry     

Synthesis and characterization of copolymers based on poly(butylene terephthalate) and ethylene oxide‐poly(dimethylsiloxane)‐ethylene oxide

A series of thermoplastic elastomers based on ethylene oxide‐poly(dimethylsiloxane)‐ethylene oxide (EO‐PDMS‐EO), as the soft segment, and poly(butylene terephthalate) (PBT), as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reaction of dimethyl terephthalate (DMT) with 1,4‐butanediol (BD) and α,ω‐dihydroxy‐(EO‐PDMS‐EO). Copolymers with a content of hard PBT segments between 40 and 90 mass % and a constant length of the soft EO‐PDMS‐EO segments were prepared. The siloxane prepolymer with hydrophilic terminal EO units was used to improve the miscibility between the polar comonomers, DMT and BD, and the nonpolar PDMS. The molecular structure and composition of the copolymers were determined by ¹H‐NMR spectroscopy, whereas the effectiveness of the incorporation of α,ω‐dihydroxy‐(EO‐PDMS‐EO) into the copolymer chains was verified by chloroform extraction. The effects of the structure and composition of the copolymers on the melting temperatures and the degree of crystallinity, as well as on the thermal degradation stability and some rheological properties, were studied. It was demonstrated that the degree of crystallinity, the melting and crystallization temperatures of the copolymers increased with increasing mass fraction of the PBT segments. The thermal stability of the copolymers was lower than that of PBT homopolymer, because of the presence of thermoliable ether bonds in the soft segments. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrospun poly(lithium 2‐acrylamido‐2‐methylpropanesulfonic acid) fiber‐based polymer electrolytes for lithium‐ion batteries

Novel single‐ion conducting polymer electrolytes based on electrospun poly(lithium 2‐acrylamido‐2‐methylpropanesulfonic acid) (PAMPSLi) membranes were prepared for lithium‐ion batteries. The preparation started with the synthesis of polymeric lithium salt PAMPSLi by free‐radical polymerization of 2‐acrylamido‐2‐methylpropanesulfonic acid, followed by ion‐exchange of H⁺ with Li⁺. Then, the electrospun PAMPSLi membranes were prepared by electrospinning technology, and the resultant PAMPSLi fiber‐based polymer electrolytes were fabricated by immersing the electrospun membranes into a plasticizer composed of ethylene carbonate and dimethyl carbonate. PAMPSLi exhibited high thermal stability and its decomposition did not occur until 304°C. The specific surface area of the electrospun PAMPSLi membranes was raised from 9.9 m²/g to 19.5 m²/g by varying the solvent composition of polymer solutions. The ionic conductivity of the resultant PAMPSLi fiber‐based polymer electrolytes at 20°C increased from 0.815 × 10^?5 S/cm to 2.12 × 10^?5 S/cm with the increase of the specific surface area. The polymer electrolytes exhibited good dimensional stability and electrochemical stability up to 4.4 V vs. Li⁺/Li. These results show that the PAMPSLi fiber‐based polymer electrolytes are promising materials for lithium‐ion batteries. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry     

New type of lithium poly(polyfluoroalkoxy)sulfonylimides as salts for PEO‐based solvent‐free electrolytes

A new type of lithium salts, —SO₂NLiSO₂OCH₂(CF₂)_nCH₂O_m— (LiPPFASI, where n = 2, 3, 4, 6, and 7), was used as salts in poly(ethylene oxide) (PEO)‐based solvent‐free electrolytes. The conductivity and electrochemical stability behaviors were studied. The results showed the electrolytes almost have a similar conductivity and the PEO–LiPPFASI (n = 3, EO/Li = 10) was the relatively better system under the experiment conditions. Moreover, most systems were found to be oxidatively stable up to 5.5 V versus Li/Li⁺ and the lithium deposition‐stripping process on the electrode was reversible for all the polymer electrolytes. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1882–1885, 2001     

Highly efficient adsorbent for organic dyes based on a temperature‐ and pH‐responsive multiblock polymer

The self‐assembly behavior of amphiphilic block copolymers in selective solutions has many applications in environmentally responsive polymer materials. In this article, we report on a new amphiphilic, temperature and pH dual‐responsive poly[2‐dimethylaminoethyl methacrylate‐co‐(methyl methacrylate)]‐b‐poly[poly(ethylene glycol) methacrylate] [P(DMAEMA‐co‐MMA)‐b‐PPEGMA], which was synthesized via reversible addition–fragmentation chain‐transfer polymerization. The structure, self‐assembly behaviors, and process of organic dye adsorption were characterized by ¹H‐NMR, ultraviolet–visible absorbance spectroscopy, and DLS measurements. P(DMAEMA‐co‐MMA)‐b‐PPEGMA was proven to be an outstanding adsorbent with excellent reversibility. Methyl red was released from the micelles as the pH value of the solution was adjusted to 4, and it could also be encapsulated again when the pH value was adjusted to 7.4 because of the sensitive pH‐responsive ability. It is promising that the triblock polymer had a positive effect on dye adsorption for environmental protection. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46626.     

Surface modification of linear low‐density polyethylene film by amphiphilic graft copolymers based on poly(higher α‐olefin)‐graft‐poly(ethylene glycol)

In this article, a series of amphiphilic graft copolymers, namely poly(higher α‐olefin‐co‐para‐methylstyrene)‐graft‐poly(ethylene glycol), and poly(higher α‐olefin‐co‐acrylic acid)‐graft‐poly(ethylene glycol) was used as modifying agent to increase the wettability of the surface of linear low‐density polyethylene (LLDPE) film. The wettability of the surface of LLDPE film could be increased effectively by spin coating of the amphiphilic graft copolymers onto the surface of LLDPE film. The higher the content of poly(ethylene glycol) (PEG) segments, the lower the water contact angle was. The water contact angle of modified LLDPE films was reduced as low as 25°. However, the adhesion between the amphiphilic graft copolymer and LLDPE film was poor. To solve this problem, the modified LLDPE films coated by the amphiphilic graft copolymers were annealed at 110° for 12 h. During the period of annealing, heating made polymer chain move and rearrange quickly. When the film was cooled down, the alkyl group of higher α‐olefin units and LLDPE began to entangle and crystallize. Driven by crystallization, the PEG segments rearranged and enriched in the interface between the amphiphilic graft copolymer and air. By this surface modification method, the amphiphilic graft copolymer was fixed on the surface of LLDPE film. And the water contact angle was further reduced as low as 14.8°. The experimental results of this article demonstrate the potential pathway to provide an effective and durable anti‐fog LLDPE film. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Influence of LiClO4 on the thermal,mechanical, and morphological properties of P(DMS‐co‐EO)/ P(EPI‐co‐EO) blends

The UV‐vis absorption, thermal analysis, ionic conductivity, mechanical properties, and morphology of a blend of poly(dimethylsiloxane‐co‐ethylene oxide) [P(DMS‐co‐EO)] and poly(epichlorohydrin‐co‐ethylene oxide) [P(EPI‐co‐EO)] (P(DMS‐co‐EO)/P(EPI‐co‐EO) ratio of 15/85 wt %) with different concentrations of LiClO₄ were studied. The maximum ionic conductivity (σ = 1.2 × 10^?4 S cm^?1) for the blend was obtained in the presence of 6% wt LiClO₄. The crystalline phase of the blend disappeared with increasing salt concentration, whereas the glass transition temperature (T_g) progressively increased. UV‐vis absorption spectra for the blends with LiClO₄ showed a transparent polymer electrolyte in the visible region. The addition of lithium salt decreased the tensile strength and elongation at break and increased Young's modulus of the blends. Scanning electron microscopy showed separation of the phases between P(DMS‐co‐EO) and P(EPI‐co‐EO), and the presence of LiClO₄ made the blends more susceptible to cracking. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1230–1235, 2004     

Polymer solid electrolyte from amorphous poly[epichlorohydrin‐co‐(ethylene oxide)]/lithium perchlorate complex

High molecular mass copolymers (P(EH/EO)s) were synthesized by coordination anionic polymerization of ethylene oxide (EO) and epichlorohydrin (EH), and P(EH/EO)s were used for the preparation of the ion‐conducting matrix. The copolymers having EO unit contents of less than 63 mol% were amorphous, and subjected to the complexation with lithium perchlorate. The temperature dependence of ionic conductivity of the P(EH/EO)/LiClO₄ complexes was expressed by the Williams–Landel–Ferry equation. Optimal conductivity was observed as a function of salt concentration. This is the result of two contradictory factors: the increase of glass transition temperature (negative for the ionic conductivity) and the increase of carrier number (positive for the ionic conductivity) with increasing lithium perchlorate concentration. The ionic conductivity strongly depended on EO unit contents in the copolymers. The introduction of EO units to poly(epichlorohydrin) main chain increased the ionic conductivity as did the addition of 20 wt% poly(oxyethylene) glycol monomethylether of molecular mass 750. © 2000 Society of Chemical Industry     

Ionic conductivity of solid polymer electrolytes for dye‐sensitized solar cells

We developed an ionic conductivity model of solid polymer electrolytes for dye‐sensitized solar cells (DSSCs) based on the Nernst–Einstein equation in which the diffusion coefficient is derived from the molecular thermodynamic model. We introduced concentration‐dependence of the diffusion coefficient into the model, and the diffusion coefficient was expressed by differentiating the chemical potential by concentration. The ionic conductivities of polymer electrolytes (PEO/LiI/I₂ system) were investigated at various temperatures and compositions. We prepared a set of PEO in which an EO : LiI mole ratio of 10 : 1 was kept constant for PEO·LiI·(I₂)_n compositions with n = 0.02, 0.05, 0.1, 0.15, 0.2, and 0.3 (mole ratio of LiI : I₂). The ionic conductivities of the electrolytes were measured using a stainless steel/polymer‐electrolyte/stainless steel sandwich‐type electrode structure using alternating current impedance analysis. The values calculated using the proposed model agree well with experimental data. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Proton‐conducting gel polyelectrolytes based on Lewis acid

A novel proton‐gel‐conducting polymer electrolyte was prepared by blending boron trifluoride diethyl etherate with poly(ethylene oxide) (PEO), glycerol, and propylene carbonate (PC) at certain molar ratios. The electrolytes exhibited ambient conductivity from 10^?5 to 10^?3 S/cm. DSC results indicated that the electrolytes were amorphous. The ¹H‐NMR and Raman spectra showed strong interactions between the Lewis acid and the hydroxyl groups both of glycerol and of PEO. This resulted in the formation of protons for ionic conduction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1267–1272, 2003     

Physical and electrochemical characterizations of poly(vinylidene fluoride‐co‐hexafluoropropylene)/SiO2‐based polymer electrolytes prepared by the phase‐inversion technique

Highly porous poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVdF–HFP)‐based polymer membranes filled with fumed silica (SiO₂) were prepared by a phase‐inversion technique, and films were also cast by a conventional casting method for comparison. N‐Methyl‐2‐pyrrolidone as a solvent was used to dissolve the polymer and to make the slurry with SiO₂. Phase inversion occurred just after the impregnation of the applied slurry on a glass plate into flowing water as a nonsolvent, and then a highly porous structure developed by mutual diffusion between the solvent and nonsolvent components. The PVdF–HFP/SiO₂ cast films and phase‐inversion membranes were then characterized by an examination of the morphology, thermal and crystalline properties, absorption ability of an electrolyte solution, ionic conductivity, electrochemical stability, and interfacial resistance with a lithium electrode. LiPF₆ (1M) dissolved in a liquid mixture of ethylene carbonate and dimethyl carbonate (1:1 w/w) was used as the electrolyte solution. Through these characterizations, the phase‐inversion polymer electrolytes were proved to be superior to the cast‐film electrolytes for application to rechargeable lithium batteries. In particular, phase‐inversion PVdF–HFP/SiO₂ (30–40 wt %) electrolytes could be recommended to have optimum properties for the application. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 140–148, 2006     

Studies of solvent effect on the conductivity of 2‐mercaptopyridine‐doped solid polymer blend electrolytes and its application in dye‐sensitized solar cells

Solvents and electrolytes play an important role in the fabrication of dye‐sensitized solar cells (DSSCs). We have studied the poly(ethylene oxide)‐poly(methyl methacrylate)‐KI‐I₂ (PEO‐PMMA‐KI‐I₂) polymer blend electrolytes prepared with different wt % of the 2‐mercaptopyridine by solution casting method. The polymer electrolyte films were characterized by the FTIR, X‐ray diffraction, electrochemical impedance and dielectric studies. FTIR spectra revealed complex formation between the PEO‐PMMA‐KI‐I₂ and 2‐mercaptopyrindine. Ionic conductivity data revealed that 30% 2‐mercaptopyridine‐doped PEO‐PMMA‐KI‐I₂ electrolyte can show higher conductivity (1.55 × 10^?5 S cm^?1) than the other compositions (20, 40, and 50%). The effect of solvent on the conductivity and dielectric of solid polymer electrolytes was studied for the best composition (30% 2‐mercaptopyridine‐doped PEO‐PMMA‐KI‐I₂) electrolyte using various organic solvents such as acetonitrile, N,N‐dimethylformamide, 2‐butanone, chlorobenzene, dimethylsulfoxide, and isopropanol. We found that ac‐conductivity and dielectric constant are higher for the polymer electrolytes processed from N,N‐dimethylformamide. This observation revealed that the conductivity of the solid polymer electrolytes is dependent on the solvent used for processing and the dielectric constant of the film. The photo‐conversion efficiency of dye‐sensitized solar cells fabricated using the optimized polymer electrolytes was 3.0% under an illumination of 100 mW cm^?2. The study suggests that N,N‐dimethylformamide is a good solvent for the polymer electrolyte processing due to higher ac‐conductivity beneficial for the electrochemical device applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42489.     

New self‐crosslinkable copolymers based on N‐methyl‐N‐vinylbenzylpyrrolidinium halide and methyl methacrylate

Thermally‐induced self‐crosslinking behaviour has been found in copolymers containing N‐methyl‐N‐vinylbenzylpyrrolidinium chloride (MVBPC) and methyl methacrylate (MMA). NMR, IR and low molecular weight model reactions demonstrate that this crosslinking reaction occurs between the methyl ester groups of the MMA units and the quaternary ammonium salts, with the resulting benzyl esters forming chemical links between the MVBPC and MMA units with the formation of N,N‐dimethylpyrrolidinium chloride. Similar crosslinking behaviour has also been found when the Cl⁻ anion is replaced by Br⁻ and I⁻, but not in the case of BF as counter anion. © 2000 Society of Chemical Industry     

Synthesis and properties of random copolymers of 2,2‐dimethyltrimethylene carbonate and ethylene carbonate catalyzed by lanthanide tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)

Random copolymers of 2,2‐dimethyltrimethylene carbonate and ethylene carbonate (EC) were synthesized with lanthanide tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s [Ln(DBMP)₃; Ln = La, Nd, Sm, or Dy] as catalysts, among which La(DBMP)₃ showed the highest activity. Poly(2,2‐dimethyltrimethylene carbonate‐co‐ethylene carbonate)s [poly(DTC‐co‐EC)]s with high molecular weights were prepared at room temperature and characterized with ¹H‐NMR and size exclusion chromatography. The thermal behavior and crystalline properties of the poly(DTC‐co‐EC)s were analyzed with differential scanning calorimetry, thermogravimetric analysis, and X‐ray diffraction. The crystallinity and melting temperatures of the poly(DTC‐co‐EC)s both decreased with increasing EC content in the copolymers. The mechanical properties of these copolymers were also investigated with dynamic mechanical analysis and tensile strength measurements, which revealed that a reduction of the glass‐transition temperature and great enhancement of the tensile properties could be achieved with higher EC contents. These improvements in the thermal and mechanical properties indicate potential applications in biomedical research for novel polycarbonates. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010