Influence of the pentaerythritol phosphate melamine salt content on the combustion and thermal decomposition process of intumescent flame‐retardant ethylene–vinyl acetate copolymer composites

Pentaerythritol phosphate melamine salt (PPMS) as a single‐molecule intumescent fire retardant was synthesized and characterized. The influence of the PPMS content on the combustion and thermal decomposition processes of intumescent‐flame‐retardant (IFR) ethylene–vinyl acetate copolymer (EVA) composites was studied by limiting oxygen index (LOI) measurement, UL 94 rating testing, cone calorimetry, thermogravimetric analysis, and scanning electron microscopy. The LOI and UL 94 rating results illustrate that PPMS used in EVA improved the flame retardancy of the EVA composites. The cone calorimetry test results show that the addition of PPMS significantly decreased the heat‐release rate, total heat release, and smoke‐production rate and enhanced the residual char fire performance of the EVA composites. The IFR–EVA3 composite showed the lowest heat‐release and smoke‐production rates and the highest char residue; this means that the IFR–EVA3 composite had the best flame retardancy. The thermogravimetry results show that the IFR–EVA composites had more residual char than pure EVA; the char residue yield increased with increasing PPMS content. The analysis results for the char residue structures also illustrated that the addition of PPMS into the EVA resin helped to enhance the fire properties of the char layer and improve the flame retardancy of the EVA composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42148.     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of a novel phosphorus‐containing compound on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A novel flame retardant, tetra(5,5‐dimethyl‐1,3‐ dioxaphosphorinanyl‐2‐oxy) neopentane (DOPNP), was synthesized successfully, and its structure was characterized by FT‐IR, ¹H NMR, and ³¹P NMR. The thermogravimetric analysis (TGA) results demonstrate that DOPNP showed a good char‐forming ability. Its initial decomposition temperature was 236.4°C based on 1% mass loss, and its char residue was 41.2 wt % at 600°C, and 22.9 wt % at 800°C, respectively. The flame retardancy and thermal degradation behavior of novel intumescent flame‐retardant polypropylene (IFR‐PP) composites containing DOPNP were investigated using limiting oxygen index (LOI), UL‐94 test, TGA, cone calorimeter (CONE) test, and scanning electron microscopy (SEM). The results demonstrate that DOPNP effectively raised LOI value of IFR‐PP. When the loading of IFR was 30 wt %, LOI of IFR‐PP reached 31.3%, and it passed UL‐94 V‐0. TGA results show that DOPNP made the thermal decomposition of IFR‐PP take place in advance; reduced the thermal decomposition rate and raised the residual char amount. CONE results show that DOPNP could effectively decrease the heat release rate peak of IFR‐PP. A continuous and compact char layer observed from the SEM further proved the flame retardance. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Flame retardation and thermal degradation of intumescent flame‐retarded polypropylene composites containing spirophosphoryldicyandiamide and ammonium polyphosphate

A novel halogen‐free intumescent flame retardant, spirophosphoryldicyandiamide (SPDC), was synthesized and combined with ammonium polyphosphate (APP) to produce a compound intumescent flame retardant (IFR). This material was used in polypropylene (PP) to obtain IFR‐PP systems whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) test, UL‐94, thermogravimetric analysis, and cone calorimetry. In addition, the mechanical properties of the systems were investigated. The results indicated that the compound intumescent flame retardant showed both excellent flame retardancy and antidripping ability for PP when the two main components of the IFR coexisted in appropriate proportions. The optimum flame retardant formulation was SPDC:APP = 3:1, which gave an LOI value of 38.5 and a UL‐94 V‐0 rating. Moreover, the heat release rate, production of CO, smoke production rate, and mass loss rate of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analysis. The char residues from the cone calorimetry experiments were observed by scanning electron microscopy, which showed that a homogeneous and compact intumescent char layer was formed. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Synergistic effects of 4A zeolite on the flame‐retardant properties and thermal stability of an efficient halogen‐free flame‐retardant EVA composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy, and char formation of an efficient halogen‐free flame‐retardant ethylene‐vinyl acetate copolymer composite (EVA/IFR) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test (CCT), digital photography, scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), laser Raman spectroscopy (LRS) and thermogravimetric analytical (TGA) methods. It was found that a small amount of 4A clearly improved the LOI value of the EVA/IFR composite and reinforced the fire retardant performance with a great reduction in the combustion parameters of the EVA/IFR system from the CCT test. The entire composites passed the UL‐94 V‐0 rating test. The TGA and integral procedure decomposition temperature (IDPT) results showed that 4A enhanced the thermal stability of the EVA/IFR system and increased the char residue content effectively. The morphological structures observed by digital and SEM imaging revealed that 4A could promote EVA/IFR to form a more continuous and compact intumescent char layer. The LRS and EDS results demonstrated that by introduction of 4A into the EVA/IFR system, a more graphite structure was formed with increase phosphorus content in the char residue. POLYM. ENG. SCI., 56:380–387, 2016. © 2016 Society of Plastics Engineers     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

Synergistic effect of mesoporous silica SBA‐15 on intumescent flame‐retardant polypropylene

Mesoporous silica SBA‐15 synthesized from Pluronic P123 and tetraethoxysilane was used as a synergistic agent on the flame retardancy of polypropylene (PP)/intumescent flame‐retardant (IFR) system. Limiting oxygen index (LOI), UL‐94 rating and thermogravimetric analysis were used to evaluate the synergistic effect of SBA‐15 on PP/IFR system. It showed that PP/IFR system could reach V‐0 with loading of SBA‐15 ranging from 0.5 to 3 wt%, while without SBA‐15 it had no rating at UL‐94 test. The LOI value increased from 25.5 to 32.2 when the loading of SBA‐15 was 1 wt%. The thermal stability of PP/IFR was improved in the presence of SBA‐15 and the amount of the char residue at 600° C was increased from 8.96 to 16.42 wt% when loading of SBA‐15 varied from 0.5 to 5 wt%. Laser Raman spectroscopy (LRS) and scanning electron microscopy were employed to study the morphology of the char residue of PP/IFR system with and without SBA‐15. Copyright © 2010 John Wiley & Sons, Ltd.     

Study on flame‐retardancy and thermal degradation behaviors of intumescent flame‐retardant polylactide systems

Two intumescent flame‐retardant (IFR) additives, IFR‐I and IFR‐II, were synthesized and their structure was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. Polylactide (PLA) was modified by the two IFRs to obtain flame‐retardant composites. The flammability of the PLA/IFR composites was characterized by the vertical burning test UL‐94 and limiting oxygen index. The limiting oxygen index values of the PLA composites increased with increase of IFR content. The PLA composite with 20 wt% IFR‐I could pass the UL‐94 V0 rating, while the composite with 30 wt% IFR‐II could not. The results of pyrolysis combustion flow calorimetry showed that the heat release capacity of PLA composites with 30 wt% IFR‐I decreased 43.1% compared with that of pure PLA. The thermal degradation and gas products of PLA/IFR‐I systems were monitored by thermogravimetric analysis and thermogravimetric analysis infrared spectrometry. Scanning electron microscopy was used to investigate the surface morphology of the char residue. Copyright © 2011 Society of Chemical Industry     

Synergistic flame retardant effect of BiFeO3 in intumescent flame‐retardant polypropylene composites

The BiFeO₃ was used to intumescent flame retardant (IFR) polypropylene (PP) composites as a synergist. The limiting oxygen index (LOI) and UL‐94 tests indicated that there is an optimum synergistic concentration of BiFeO₃ in the PP/IFR composites. Thermogravimetric analysis (TG) results of flame retardant PP showed that the moderate of BiFeO₃ can reduce the decomposition rate of sample at high temperatures. TG of APP/PER/BiFeO₃ showed that BiFeO₃ main affects the third mass loss stage of APP/PER. So the morphology and composition of the char residue of APP/PER/BiFeO₃ composites were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and laser Raman spectroscopy (LRS). An appropriate amount of BiFeO₃ can react with APP/PER forming Bi O P and Fe O P bond, and so more P elements was involved in a crosslinking reaction to form more stable char residue, which can effectively increase the flame retardant properties of PP. POLYM. COMPOS., 38:2771–2778, 2017. © 2015 Society of Plastics Engineers     

Synergistic effect of kaolinite/halloysite on the flammability and thermostability of polypropylene

Kaolinite (Kaol) and halloysite nanotubes (HNT) are both aluminosilicate clays with similar chemical formulation and different microshapes. In this article, nanotubular HNT and nanoplate Kaol together were introduced into polypropylene (PP) containing intumescent flame retardant (IFR). The flammability of the PP composites was characterized by limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimeter tests (CCT). The results showed that for the composite with 75 wt % PP and 25 wt % IFR, its LOI was 31.0% and it obtained a UL‐94 grade of V‐2. For the composite of 75 wt % PP, 23.5 wt % IFR, and 1.5 wt % (Kaol/HNT = 9/1), its LOI increased to 36.9 and it obtained a UL‐94 grade of V‐0; at the same time, its peak heat release rate value in CCT decreased by 82.2% compared to neat PP. The thermostability analysis indicated that the mixture of Kaol/HNT could improve the thermostability and final char yield. The char residues were comprehensively analyzed by scanning electron microscopy and Fourier transform infrared spectroscopy. The results illustrated that the Kaol/HNT combination was beneficial to forming a crosslinked network and promoting formation of a compact char with higher strength. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46507.     

Effect of charring agent THEIC on flame retardant properties of polypropylene

Tris(2‐hydroxyethyl) isocyanurate (THEIC) was used as charring agent and combined with ammonium polyphosphate (APP) to form an intumescent flame retardant (IFR) for polypropylene (PP). The flame retardancy and combustion performance of PP/IFR composite was tested by limiting oxygen index (LOI), UL‐94 vertical burning test and cone calorimeter. The results showed that PP/IFR composite had highest LOI of 34.8 and obtained V‐0 rating when 30 wt % IFR was loaded and mass ratio APP/THEIC was 2 : 1. The peak heat release (PHRR) and total heat release (THR) values of PP composite containing FRs were remarkably reduced compared with that of pure PP. However, water resistant test demonstrated the PP/IFR composite had poor flame retardant durability, both the LOI value and UL‐94 V‐rating decreased when PP/IFR composite was soaked in water at 70°C after 36 h. The degradation process and the char morphology of IFR and PP/IFR composite were investigated by TGA and SEM images. The possible reaction path between APP and THEIC in the swollen process was proposed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41214.     

Flame Retardancy and Thermal Performance of Polypropylene Treated With the Intumescent Flame Retardant,Piperazine Spirocyclic Phosphoramidate

Piperazine spirocyclic phosphoramidate (PSP), a novel halogen‐free intumescent flame retardant, was synthesized and used to improve the flame retardancy and dripping resistance of polypropylene (PP) combined with ammonium polyphosphate (APP) and a triazine polymer charring‐foaming agent (CFA). The optimum flame‐retardant formulation was PSP:APP:CFA = 3:6:2 (weight ratio). The flammability and thermal behavior of the (intumescent flame‐retardant)‐PP (IFR‐PP) were investigated via limiting oxygen index (LOI), vertical burning tests (UL‐94), thermogravimetric analysis, and cone calorimetry (CONE). The results indicated that the IFR‐PP had both excellent flame retardancy and anti‐dripping ability. The optimum flame‐retardant formulation gave an LOI value of 39.8 and a UL‐94 V‐0 rating to PP. Moreover, both the heat release rate and the total heat release of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analyses. The residues of IFR‐PP obtained after CONE tests were observed by scanning electron microscopy, and it was found that the char yield was directly related to the flame retardancy and anti‐dripping behavior of the treated PP. J. VINYL ADDIT. TECHNOL., 20:10–15, 2014. © 2014 Society of Plastics Engineers     

Synthesis of amino trimethylene phosphonic acid melamine salt and its application in flame‐retarded polypropylene

Amino trimethylene phosphonic acid melamine salt (MATMP) was synthesized and used as acid source and blowing agent in intumescent flame‐retarded polypropylene (PP); its compositions were characterized by Fourier transform infrared spectroscopy and X‐ray powder diffraction. An intumescent flame retardant (IFR) system composed of MATMP, pentaerythritol (PER), and PP was tested by limiting oxygen index (LOI), UL‐94, cone calorimeter tests, and thermogravimetric analysis and compared with an ammonium polyphosphate (APP)/PER system. The results showed that MATMP had better water resistance than APP, the LOI value of PP/MATMP/PER composite can reach 30.3%, and a UL‐94 V‐0 rating can be reached at 25 wt % IFR loading. The amount of residual char of IFR MATMP/PER was 20.3 and 9.5 wt % at 400 and 600 °C, respectively. A thermooxidative degradation route and a possible flame‐retardant mechanism of IFR were proposed according to the analysis of evolved gases and residual chars. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46274.     

Effects of organopalygorskite on intumescent flame‐retarded polypropylene

The effect of organopalygorskite (OPGS) on an intumescent flame retardant (IFR) low‐density polypropylene (PP) has been investigated using the limited oxygen index (LOI), vertical burning test (UL‐94) and thermogravimetric analysis (TGA). The results of the LOI and UL‐94 tests indicate that the addition of OPGS substantially increases the LOI value for PP/IFR at a OPGS to IRF mass ratio of 2/28 with 30 wt% of total flame retardant. In addition, the samples pass the V‐0 rating in the UL‐94 tests. The results indicate that the addition of 2.0 wt% of OPGS simultaneously increases the tensile strength and bending strength of PP/IFR. J. VINYL ADDIT. TECHNOL., 24:281–287, 2018. © 2016 Society of Plastics Engineers     

A novel halogen‐free intumescent flame retardant containing phosphorus and nitrogen and its application in polypropylene systems

A novel halogen‐free intumescent flame retardant, pentaerythritol spirobisphosphoryl‐dicyandiamide (SPDC), was synthesized and characterized by FTIR, ¹H NMR, and ³¹P NMR spectra. The new flame retardant was used in polypropylene (PP) to prepare flame‐retardant materials whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) method, thermogravimetric analysis (TGA), and cone calorimetry (CONE). The mechanical properties were also investigated. The results indicated that when the addition of SPDC reached 30 wt%, the material showed both excellent flame retardancy and anti‐dripping abilities for PP. Moreover, the LOI value of the PP‐IFR(30%) was 32.5, and it passed the UL‐94 V‐0 rating test. The CONE results revealed that in PP, SPDC(30%) significantly decreased the peak heat release, total heat release, and smoke relative to their values for pure PP. The morphological structures observed by SEM demonstrated that SPDC could promote the formation of a homogeneous and compact intumescent char layer. The TGA data showed that SPDC could enhance the thermal stability of PP and effectively increase the char residue formation. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Component ratio effects of hyperbranched triazine compound and ammonium polyphosphate in flame‐retardant polypropylene composites

A hyperbranched derivative of triazine group (EA) was synthesized by elimination reaction between ethylenediamine and cyanuric chloride. The different‐mass‐ratio EA and ammonium polyphosphate (APP) were mixed and blended with polypropylene (PP) in a constant amount (25%) to prepare a series of EA/APP/PP composites. The component ratio effect of EA/APP on the flame‐retardant property of the EA/APP/PP composites was investigated using the limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimetry tests. Results indicated that the EA/APP/PP (7.50/17.50/75.00) composite with the appropriate EA/APP mass ratio had the highest LOI, UL94 V‐0 rating, lowest heat release rate, and highest residue yield. These results implied that the appropriate EA/APP mass ratio formed a better intumescent flame‐retardant system and adequately exerted their synergistic effects. Furthermore, average effective combustion heat values revealed that EA/APP flame retardant possessed the gaseous‐phase flame‐retardant effect on PP. Residues of the EA/APP/PP composites were also investigated by scanning electron microscopy, Fourier‐transform infrared, and X‐ray photoelectron spectroscopy. Results demonstrated that the appropriate EA/APP mass ratio can fully interact and lock more chemical constituents containing carbon and nitrogen in the residue, thereby resulting in the formation of a dense, compact, and intumescent char layer. This char layer exerted a condensed‐phase flame‐retardant effect on EA/APP/PP composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41006.     

Application of a novel halogen‐free intumescent flame retardant for acrylonitrile‐butadiene‐styrene

A novel intumescent flame retardant (IFR), containing ammonium polyphosphate (APP) and poly(tetramethylene terephthalamide) (PA4T), was prepared to flame‐retard acrylonitrile‐butadiene‐styrene (ABS). The flame retardation of the IFR/ABS composite was characterized by limiting oxygen index (LOI) and UL‐94 test. Thermogravimetric analysis (TGA) and TGA coupled with Fourier transform infrared spectroscopy (TG‐FTIR) were carried out to study the thermal degradation behavior of the composite and look for the mechanism of the flame‐retarded action. The morphology of the char obtained after combustion of the composite was studied by scanning electron microscopy (SEM). It has been found the intumescent flame retardant showed good flame retardancy, with the LOI value of the PA4T/APP/ABS (7.5/22.5/70) system increasing from 18.5 to 30% and passing UL‐94 V‐1 rating. Meanwhile, the TGA and TG‐FTIR work indicated that PA4T could be effective as a carbonization agent and there was some reaction between PA4T and APP, leading to some crosslinked and high temperature stable material formed, which probably effectively promoted the flame retardancy of ABS. Moreover, it was revealed that uniform and compact intumescent char layer was formed after combustion of the intumescent flame‐retarded ABS composite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

An effective intumescent flame retardancy of LDPE induced by the combination of APP and CNCO‐HA

A char‐forming agent poly(4,6‐dichloro‐N‐hydroxyethyl?1,3,5‐triazin‐2‐amine‐1,6‐diaminohexane) (CNCO‐HA) containing triazine rings was chosen for improving the flame retardant of low density polyethylene (LDPE). The synergistic effect of CNCO‐HA and Ammonium polyphosphate (APP) on the flame retardancy and char‐forming behavior of LDPE were investigated. The limited oxygen index (LOI) and vertical burning test (UL‐94) results indicated the optimal weight ratio of APP to CNCO‐HA was 3:1, and the LOI value of composite reached 31.0% with 30% intumescent flame retardant (IFR) loading. The cone calorimeter test analysis revealed that IFR presented excellent char forming and smoke suppression ability, and resulted in the efficient decrease of combustibility parameters. The thermogravimetric analysis results demonstrated that IFR reduced the thermal degradation rate at main stage of degradation. Scanning electron microscopy observed that IFR promoted to form a compact and continuous intumescent char layer. The Laser Raman spectroscopy spectra showed that larger graphitization degree was formed to enhance the strength of char, and Fourier transform infrared results presented that P‐O‐C and P‐O‐P structures in the residue char were formed to improve shield performance of the char layer to obtain better flame retardant properties of the composite. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43950.     

Synthesis of phosphorus‐ and phenyl‐based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene–IFR system

In this study, we present an approach for the synthesis of novel phosphorous‐ or phenyl‐ containing polymers, 2_phenyl, 3_phospho, and 2_phenyl‐co‐3_phospho, derived from ring‐opening metathesis polymerization (ROMP), to reduce the flammability of polypropylene (PP). The composites were processed by melt‐blending ROMP polymers and octaphenyl–polyhedral oligomeric silsesquioxane with PP/intumescent flame retardant (IFR) compounds at different compositions. The composites were characterized by limiting oxygen index (LOI), UL‐94, and mechanical tests as well as thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The molecular structures of phosphorous‐ and phenyl‐containing polymers were proved by ¹H‐NMR, ¹³C‐NMR, and Fourier transform infrared spectroscopy. The online rheological measurements indicated that the addition of additives to the PP/IFR system increased the melt viscosity of the compounds regardless of the type. The DSC analysis showed that the addition of ROMP polymers to the PP/IFR system influenced the crystal perfection and degree of crystallization. TGA analysis of the composites revealed that the addition of ROMP polymers to PP/IFR compounds deteriorated the thermal stability as the amount of phosphorus increased in the matrix. Dynamic mechanical properties such as storage modulus (E′) and loss modulus (E″) of the composites were lowered by the addition of ROMP polymers. The LOI and UL‐94 rating of PP/IFR were enhanced by the addition of ROMP polymers. It was successfully demonstrated that the novel phosphorous‐ or phenyl‐containing polymers were highly potent additives in optimizing the flammability of PP composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45998.     

Preparation of a novel phosphorus‐ and nitrogen‐containing flame retardant and its synergistic effect in the intumescent flame‐retarding polypropylene system

A novel phosphorus‐ and nitrogen‐containing flame retardant (melamine phytate) was synthesized via the reaction between melamine and phytic acid. The chemical structure of melamine phytate (MPA) was confirmed by Fourier transform‐infrared spectra (FT‐IR) and elemental analysis. And the thermal behavior of MPA investigated by thermogravimetric analysis (TGA) demonstrates that MPA possesses a good char‐forming ability at high temperature. Besides, limiting oxygen index (LOI) and vertical burning tests (UL‐94) illustrate that polypropylene/melamine phytate/dipentaerythritol (PP/MPA/DPER) (70/22.5/7.5) can reach the LOI value of 28.5% and achieve V‐0 rating at the flame retardant loading of 30 wt%. Except that, the thermal weight loss of MPA and DPER in PP composites was investigated by TGA in detail. Moreover, the char residue of PP composite after combustion was systematically analyzed by FT‐IR, scanning electron microscope (SEM) and X‐ray photoelectron spectroscopy (XPS), which can further propose and confirm the flame retardant mechanism. POLYM. COMPOS., 36:1606–1619, 2015. © 2014 Society of Plastics Engineers