Bone cell viability on collagen immobilized poly(3‐hydroxybutrate‐co‐3‐hydroxyvalerate) membrane: Effect of surface chemistry

The effect of surface chemistry on proliferation and morphology of bone cells cultured on surface modified poly(3‐hydroxybutrate‐co‐3‐hydroxyvalerate) (PHBV) and untreated PHBV was evaluated. The surface of cast PHBV film was physically and chemically immobilized with collagen. For preparing chemically immobilized collagen surface, PHBV film was ozone treated followed by grafting of PMAA chains and the immobilization of collagen. The surface roughness and hydrophilicity of PHBV film were determined by atomic force microscopy (AFM) and contact angle measurements, respectively. It was found that the duration of ozone exposure and monomer concentration used for grafting PMMA chains influenced the amount of collagen immobilized. The cell proliferation on PHBV surfaces with chemically and physically immobilized collagen was compared with untreated PHBV using 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) assay. The bone cell activity on chemically and physically immobilized collagen PHBV films was found to be 246 and 107% for UMR‐106 and 68 and 9% for MC3T3 cell lines, respectively. Although the results are very preliminary, the chemically grafted collagen on PHBV surface provided a favorable matrix for cell proliferation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2445–2453, 2004     

Formulation of silver chloride/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (AgCl/PHBV) films for potential use in bone tissue engineering

Orthopedic implant failure due to bacterial infection has been a concern in bone tissue engineering. Here, we have formulated a composite made of biodegradable polymer, i.e., poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and silver chloride. Ag⁺ ions released from the AgCl/PHBV film can promote an aseptic environment by promoting inhibition of bacterial growth while maintaining bone cell growth, depending on AgCl loading. The objective of this study is to formulate AgCl/PHBV film(s) of varying composition so as to evaluate the dependence of AgCl loading in the film on antimicrobial activity and cytotoxicity. The release kinetics of silver ions from AgCl/PHBV film in aqueous and Dulbecco's Modified Eagle Medium showed similarity in the initial burst of ions during the first day of desorption followed by a gradual release of ions over extended time period. The antibacterial efficacy of AgCl/PHBV film against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa was evaluated by microbiological assay, while cytotoxicity of the film toward MC3T3‐E1 cells was determined by MTT assay. For all compositions studied, a clear zone of inhibition around AgCl/PHBV film was noticed on a modified Kirby‐Bauer disk diffusion assay. We established that MC3T3‐E1 cell attachment on AgCl/PHBV film is strongly related to loading of AgCl in the film. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45162.     

Electrospinning of Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) nanofibers with feature surface microstructure

The development of surface microstructure with specific features in electrospun nanofibers has attracted more and more attention in recent years. In this article, a common biological polyester, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was electrospinning into nanofibers with “coral‐like” surface microstructure by a conventional‐electrospinning setup. The effect of the process parameters on the microstructure in electrospun nanofibers were investigated via a series of experiments. The formation mechanism of this feature structure and cytotoxicity assays of PHBV membrane were also discussed. The water contact angle of the electrospun PHBV membrane was higher than that of the PHBV cast film due to a very‐rough fiber surface including porous beads when PHBV was electrospun from the concentration of 4 wt %. Because of special hole shape and size distribution, the physical structure of surface of PHBV electrospun fibers offered it special properties, such as specific‐surface area, hydrophilic–hydrophobic properties, adhesion properties of cells and biological substances, etc. The demonstrated method of form coral structure would contribute to the areas such as filtration, sensor, tissue engineering scaffolds, and carriers of drugs or catalysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fabrication of honeycomb‐structured porous films from poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) via the breath figures method

Formation of porous films from poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) using the breath figures (BF) method was investigated by evaporating solutions in chloroform in humid air and examining film structure using optical and scanning electron microscopy (SEM). BF films were successfully fabricated from PHB (M_w = 486,000 g/mol) and displayed hexagonal arrays of pores, which varied in diameter (D = 7–2 μm) with solution concentrations (0.5–2.00%). SEM of fractured films also showed subsurface closed nano‐pores (D = 500–700 nm). BF films cast from PHBV (5% HV) formed arrays with smaller pores and apparent surface defects. Differential scanning calorimetry showed that porous PHB and PHBV films produced using the BF method were more crystalline than nonporous solvent cast films of PHB and PHBV. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Photografting polymerization of polyacrylamide on poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) films. II. Wettability and crystallization behaviors of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)‐graft‐polyacrylamide films

The wettability and crystallization behaviors of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)‐graft‐polyacrylamide (PAM) films were studied. X‐ray photoelectron spectroscopy analyses illustrated that about 62 atom % of the total polar functionalities on the grafted film with 17% grafting percentage (GP) was amide groups. Wide‐angle X‐ray diffraction results suggest that grafted PAM induced defects in PHBV crystals and influenced their crystal structure. Differential scanning calorimetry (DSC) spectra showed the two melting regions, 60–90 and 145–170°C, of the imperfect PHBV crystals of the grafted films. Grafted PAM could suppress the recrystallization of PHBV, which was consistent with the polarizing optical microscopy results, in which the maximum PHBV spherulite diameter decreased from 350 μm for the PHBV film to 50 μm for the film with 53% GP. In addition, DSC studies revealed that the crystallinity of the grafted films decreased with increasing GP, which facilitated the diffusion of water into the films. The water contact angle of grafted films decreased and the water‐swelling percentage increased as GP went up. These results demonstrate the potential of PHBV‐g‐PAM for wettable surface constructs in tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Miscibility,crystallization kinetics,and mechanical properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)(PHBV)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)(P3/4HB) blends

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)(PHBV)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) blend films were prepared by solvent‐cast method. The nonisothermal crystallization results showed that PHBV and P3/4HB are miscible due to a single glass transition temperature (T_g), which is dependent on blend composition. The isothermal crystallization results demonstrate that the crystallization rate of PHBV becomes slower after adding amorphous P3/4HB with 19.2 mol% 4HB, which could be proved through depression of equilibrium melt point ($T_m^o$ ) from 183.7°C to 177.6°C. For pure PHBV and PHBV/P3/4HB (80/20) blend, the maximum crystallization rate appeared at 88°C and 84°C, respectively. FTIR analysis showed that PHBV/P3/4HB blend films would maintain the helical structure, similar to pure PHBV. Meanwhile, with increasing P3/4HB content, the inter‐ and intra‐interactions of PHBV and P3/4HB decrease gradually. Besides, a lower elastic modulus and a higher elongation at break were obtained, which show that the addition of P3/4HB would make the brittle PHBV to ductile materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Application of low loading of collagen in electrospun poly[(l‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds to promote cellular biocompatibility

Electrospinning of various polymers has been used to produce nanofibrous scaffolds that mimic the extracellular matrix and support cell attachment for the potential repair and engineering of nerve tissue. In the study reported here, an electrospun copolymer of l ‐lactide and ε‐caprolactone (67:33 mol%) resulted in a nanofibrous scaffold with average fibre diameter and pore size of 476 ± 88 and 253 ± 17 nm, respectively. Blending with low loadings of collagen (<2.5% w/w) significantly reduced the average diameter and pore size. The uniformity of fibre diameter distributions was supported with increasing collagen loadings. The nanofibrous scaffolds significantly promoted the attachment and proliferation of olfactory ensheathing cells compared to cells exhibiting asynchronous growth. Furthermore, analysis of cell health through mitochondrial activity, membrane leakage, cell cycle progression and apoptotic indices showed that the nanofibrous membranes promoted cell vigour, reducing necrosis. The study suggests that the use of more cost‐effective, low loadings of collagen supports morphological changes in electrospun poly[(l ‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds, which also support attachment and proliferation of olfactory ensheathing cells while promoting cell health. The results here support further investigation of the electrospinning of these polymer blends as conduits for nerve repair. © 2013 Society of Chemical Industry     

Fabrication and Evaluation of Polycaprolactone–Poly(hydroxybutyrate) or Poly(3‐Hydroxybutyrate‐co‐3‐Hydroxyvalerate) Dual‐Leached Porous Scaffolds for Bone Tissue Engineering Applications

Polycaprolactone (PCL) blend with poly(hydroxybutyrate) (PHB) or poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) dual‐leached scaffolds are prepared by using the solvent casting and salt–polymer‐leaching technique. The blending of the PHB and PHBV in PCL scaffolds results in decreased porosities of the scaffolds, and the water absorption capacities of the scaffolds also decrease. The compressive modulus of the PCL–PHB and PCL–PHBV dual‐leached scaffolds is greatly increased by the blending of PHB or PHBV matrix. An indirect cytotoxicity evaluation of all scaffolds with mouse fibroblastic cells (L929) and mouse calvaria‐derived preosteoblastic cell (MC3T3‐E1) indicates that all dual‐leached scaffolds are posed as nontoxic to cells. Both PCL–PHB and PCL–PHBV dual‐leached scaffolds are supported by the attachment of MC3T3‐E1 at significantly higher levels to tissue culture polystyrene plate (TCPS) and are able to support the proliferation of MC3T3‐E1 at higher levels to that cells on TCPS and PCL scaffolds. For mineralization, cells cultured on surfaces of PCL–PHB and PCL–PHBV dual‐leached scaffolds show higher mineral deposition than on TCPS and PCL scaffold.

     

Novel Self‐Reinforced Films Based on Poly (3‐Hydroxybutyrate‐Co‐3‐Hydroxyvalerate) (PHBV) and PHBV Microparticles

Biodegradable self‐reinforced films of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and PHBV microparticles were prepared through the solvent casting method (srPHBV). Differential scanning calorimetry (DSC), wide angle X‐ray scattering (WAXS) and polarized optical microscopy results confirmed the nucleating effect of PHBV microparticles. WAXS proved that diffractograms of PHBV and srPHBV‐6 films at room temperature contain the main characteristic diffraction peaks of an orthorhombic α‐type crystalline structure. Small angle X‐ray scattering (SAXS) showed a similar decrement rate of long spacing in PHBV and srPHBV films. SAXS/WAXS data revealed that when the amount of filler was increased, lamellae thickness grew. Transmission electron microscopy images illustrated well filler dispersion in the srPHBV films. Scanning electron microscopy results exhibited a significant reduction in porosity for srPHBV films once the PHBV microparticles were added. Atomic force microscopy analysis showed higher surface roughness after filler incorporation. Samples of srPHBV films showed higher barrier properties against water vapor, oxygen, and carbon dioxide. Combined properties of srPHBV films revealed the possibility of being suitable candidates for food packaging applications. POLYM. ENG. SCI., 59:E120–E128, 2019. © 2018 Society of Plastics Engineers     

Surface modification of PHBV films with different functional groups: Thermal properties and in vitro degradation

Polyacrylamide was photografted on solution‐cast poly(3‐hydroxybutyric acid‐co‐3‐hydroxyvaleric acid) (PHBV) films (amide‐PHBV), on which amide groups were transformed into amine groups through Hofmann degradation reaction (amine‐PHBV), followed by collagen coupling reaction to prepare collagen‐modified PHBV (collagen‐PHBV). Amide‐, amine‐, and collagen‐PHBV had higher water absorption and d‐spacing values than PHBV, and melting temperatures and enthalpies decreased in the order of collagen‐PHBV < amine‐PHBV < amide‐PHBV < PHBV. Thermal decomposition kinetics of PHBV component in the films has been investigated by means of nonisothermal thermogravimetric and derivative thermogravimetric studies. Applying the Avrami‐Erofeev equation with index of 2/5 as the probable kinetic function, the suitable activation energy was calculated by the Friedman method through linear fitting (correlation coefficient > 0.98). The activation energy of PHBV was lower than that of amide‐PHBV but higher than that of amine‐ and collagen‐PHBV. Being incubated in phosphate‐buffered saline at 37°C, the modified PHBV films showed more weight loss than PHBV during 360 days; however, pH of degradation fluids was nearly neutral as the initial pH was recorded at 7.2. The modified PHBV films with different functional groups may provide an improved biodegradation rate for various cytocompatible biomaterials constructs. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Photografting polymerization of polyacrylamide on PHBV films (I)

Photografting polymerization of polyacrylamide (PAM) onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) films using benzophenone as photoinitiator was studied. The morphology and structure of the grafted PHBV film were characterized by Fourier transformed infrared spectroscopy (FTIR) with attenuated total reflectance (ATR) and scanning electron microscope (SEM) with energy dispersive X‐ray spectrometer (EDX). The grafting percentage and grafting efficiency of the grafted PHBV film went up with the increase of acrylamide concentration and irradiation time. It was observed that photografting polymerization of PAM was not only limited to the film surface, but also in situ occurred inside the film to form the pore microstructure. Sheep bone marrow stromal cell studies showed that MSCs cells attachment efficiency on the grafted PHBV films increased and cells grew well. These results demonstrated the potentiality of PAM‐photografting PHBV in medical applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 4088–4095, 2007     

Thermal degradation of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in drying treatment

This study examines the isothermal treatment of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) powders and films. The PHB and PHBV crystallinities were determined using X‐ray diffractometry, and shown to increase with temperature (130–150°C) and then decreased from 55% to 45% at 180°C. The crystal morphology of crystal planes (101) and (111) became sharp at a high temperature. The weight average molecular weight (M_w) of PHB decreased from 1,028,000 to 41,800 g/mol when heated at 180°C for 30 min. The molecular weight of PHB decreased more rapidly than that of PHBV with time. No peak signal was observed in gel permeation chromatography after heating at 150°C because the solubility of PHB changed with crystallinity. The thermal behaviors of PHB and PHBV were analyzed by differential scanning calorimetry and thermogravimetric analysis. The roughness, contact angle, and surface morphology of PHB and PHBV films were also measured to determine the surface properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3659–3667, 2013     

Miscibility and crystallization behavior of biodegradable poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/phenolic blends

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/phenolic blends are new miscible crystalline/amorphous polymer blends prepared via solution casting method in this work, as evidenced by the single composition dependent glass transition temperature. The measured T_gs can be well fitted by the Kwei equation with a q value of 13.6 for the PHBV/phenolic blends, indicating that the interaction between the two components is strong. The negative polymer–polymer interaction parameter, obtained from the melting depression of PHBV using the Nishi‐Wang equation, indicating the thermal miscibility of PHBV and phenolic. The spherulitic morphology and crystal structure of PHBV/phenolic blends were studied with polar optical microscopy and wide angle X‐ray diffraction compared with those of neat PHBV. It is found that the growth rates of PHBV in the blends are lower than that in neat PHBV at a given crystallization temperature, and the crystal structure of PHBV is not modified by the presence of phenolic in the PHBV/phenolic blends, but the crystallinity decrease with the increasing of phenolic. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Fast crystallization of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with talc and boron nitride as nucleating agents

The crystallization behavior of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) induced by two kinds of nucleating agents, boron nitride (BN) and talc, was investigated by differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both BN and talc have good nucleating ability in the crystallization of PHB and PHBV. From these results, combined with molecular weight measurement by gel permeation chromatography, the mechanism of nucleation by BN and talc in the crystallization of PHB and PHBV has been proposed. BN acts as a nucleating agent itself and initiates nucleation in the crystallization of PHB and PHBV. Talc acts in a different way. It reacts as a chemical reagent with the molten chains of PHB/PHBV, while the reaction product acts as the true nucleating agent, which lowers the crystallization barriers of PHB and PHBV. ¹H NMR spectroscopy provides evidence for the reaction between PHB and talc and supports the proposed nucleation mechanism. Copyright © 2005 Society of Chemical Industry     

Single Solvent‐Based Film Casting Method for the Production of Porous Polymer Films

A single solvent‐based film casting process for fabricating porous polymer films is developed in this study. The porous film is produced by mixing concentrated polylactic acid (PLA)/chloroform solution (20 wt%) and fresh chloroform solvent is followed by film casting. The average pore sizes of the films produced are seen to increase from 2.1 (±0.1) µm to 6.4 (±0.2) µm with increasing ratio of concentrated PLA solution and fresh solvent from 1:2 to 1:4. Functional groups of PLA after casting into porous film are confirmed via Fourier transform infrared spectroscopy analysis. Cytocompatibility studies (via Alamar Blue assessment) utilizing MG‐63 cells on the porous PLA films reveal an increase in cell metabolic activity up to 8 d postseeding. In addition, these direct cell culture studies show that the porous membranes support cell adhesion and growth not only on the surface but also through the porous structures of the membrane, highlighting the suitability of these porous films in tissue engineering applications.     

Control and development of crystallinity and morphology in poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)/poly(propylene carbonate) blends

Two different methodologies (reactive blending and mechanical blending) for preparing blends of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate) (PHBV) and poly(propylene carbonate) (PPC) were used. The miscibility, chemical structure, thermal behavior, crystallinity, morphology, and mechanical properties of the blends were investigated with Fourier transform infrared spectroscopy, differential scanning calorimetry, polarized optical microscopy, scanning electron microscopy, and tensile tests. A certain extent of hydrogen‐bonding interactions between PHBV and PPC took place in the blends. The graft copolymerization was confirmed in the reactive system. The incorporation of PPC hampered the crystallization process of PHBV and evidently altered the morphology, and the effect was enhanced in the reactive blend. The mechanical properties of PHBV could be changed by 1–2 orders of magnitude by blending modification. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1427–1436, 2005     

Environmental factors and kinetics of microbial degradation of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in an aqueous medium

Environmental factors such as oxygen, temperature, and microbial species may have significant effects on decomposition of biodegradable polymers. A representative biodegradable, thermoplastic polymer, poly(3‐hydroxybutyrate‐co‐hydroxyvalerate) (PHBV), was decomposed in an aqueous medium under controlled laboratory conditions by soil microbes for the intrinsic degradation kinetics and the effects of the environmental factors on polymer biodegradation. The amount of proteins, including the PHBV depolymerases, that attached to the polymer surfaces was quite constant during the period of significant mass loss of the polymer specimens. The microbial polymer degradation followed a zero‐order rate model, so the residual mass fraction of PHBV films declined linearly with time. The mixed aerobic microbial organisms from fertile soil showed a higher activity of polymer degradation than an aerobic PHBV‐producing bacterium and the mixed anaerobes in the same soil. The mixed anaerobic microorganisms from barren soil decomposed the polymer at a slower rate than the anaerobes from fertile soil, and this was attributed to fewer microbial cells in the barren soil instead of the difference in the microbial species. The temperature effect on PHBV degradation can be described with an Arrhenius equation, and the activation energy is around 16 kcal/mol. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 205–213, 2003     

Effect of graft modification with poly(N‐vinylpyrrolidone) on thermal and mechanical properties of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. The effect of graft modification with PVP on the thermal and mechanical properties of PHBV was investigated. The thermal stability of grafted PHBV was remarkably improved while the melting temperature (T_m) was almost not affected by graft modification. The isothermal crystallization behavior of samples was observed by polarized optical microscopy and the results showed that the spherulitic radial growth rates (G) of grafted PHBV at the same crystallization temperature (T_c) decreased with increasing graft yield (graft%) of samples. Analysis of isothermal crystallization kinetics showed that both the surface free energy (σ_e) and the work of chain‐folding per molecular fold (q) of grafted PHBV increased with increasing graft%, implying that the chains of grafted PHBV are less flexible than ungrafted PHBV. This conclusion was in agreement with the mechanical testing results. The Young's modulus of grafted PHBV increased while the elongation decreased with increasing graft%. The hydrophilicity of polymer films was also investigated by the water contact angle measurement and the results revealed that the hydrophilicity of grafted PHBV was enhanced. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(hydroxybutyrate‐co‐hydroxyvalerate) and bovine serum albumin blend prepared by electrospinning

Electrospinning is a method for the preparation of nanosized polymer fibers. Here, electrospinning is used to prepare a blend of a polyester, poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV), and a globular protein, bovine serum albumin (BSA). The electrospun blend film is compared with a solution‐cast blend film and with single‐component electrospun films made of PHBV and BSA. In the electrospun blend films, BSA manifests itself as flat ribbons and a fine network formed from fibers less than 50 nm in diameter. The dissolution rate of BSA from the electrospun blended film is lower than from the solution‐cast one. The films are characterized using scanning electron microscopy, differential scanning calorimetry, and contact‐angle measurements. The obtained PHBV+BSA blend films have several emergent properties: a slow BSA dissolution rate, a fine BSA network, and unusual thermal behavior. Thus, the PHBV+BSA blend films introduce a new class of polymer–protein blends. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45090.     

Antimicrobial nanocomposites and electrospun coatings based on poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) and copper oxide nanoparticles for active packaging and coating applications

Active biodegradable poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) melt mixed nanocomposites and bilayer structures containing copper oxide (CuO) nanoparticles were developed and characterized. The bilayer structures consisted of a bottom layer of compression molded PHBV3 (3% mol valerate) coated with an active electrospun fibers mat made with CuO nanoparticles and PHBV18 (18% valerate) derived from microbial mixed cultures and cheese whey. The results showed that the water vapor permeability increased with the CuO addition while the oxygen barrier properties were slightly enhanced by the addition of 0.05 wt % CuO nanoparticles to nanocomposite films but a negligible effect was registered for the bilayer structures. However, the mechanical properties were modified by the addition of CuO nanoparticles. Interestingly, by incorporating highly dispersed and distributed CuO nanoparticles in a coating by electrospinning, a lower metal oxide loading was required to exhibit significant bactericidal and virucidal performance against the food‐borne pathogens Salmonella enterica, Listeria monocytogenes, and murine norovirus. The biodisintegration tests of the samples under composting conditions showed that even the 0.05% CuO‐coated structures biodegraded within 35 days. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45673.