Enhanced Performance of a Self‐Powered Organic/Inorganic Photodetector by Pyro‐Phototronic and Piezo‐Phototronic Effects

Self‐powered photodetectors (PDs) have long been realized by utilizing photovoltaic effect and their performances can be effectively enhanced by introducing the piezo‐phototronic effect. Recently, a novel pyro‐phototronic effect is invented as an alternative approach for performance enhancement of self‐powered PDs. Here, a self‐powered organic/inorganic PD is demonstrated and the influences of externally applied strain on the pyro‐phototronic and the photovoltaic effects are thoroughly investigated. Under 325 nm 2.30 mW cm^‐2 UV illumination and at a ‐0.45% compressive strain, the PD's photocurrent is dramatically enhanced from ≈14.5 to ≈103 nA by combining the pyro‐phototronic and piezo‐phototronic effects together, showing a significant improvement of over 600%. Theoretical simulations have been carried out via the finite element method to propose the underlying working mechanism. Moreover, the pyro‐phototronic effect can be introduced by applying a ‐0.45% compressive strain to greatly enhance the PD's response to 442 nm illumination, including photocurrent, rise time, and fall time. This work provides in‐depth understandings about the pyro‐phototronic and the piezo‐phototronic effects on the performances of self‐powered PD to light sources with different wavelengths and indicates huge potential of these two effects in optoelectronic devices.     

Ultrahigh‐Performance Self‐Powered Flexible Double‐Twisted Fibrous Broadband Perovskite Photodetector

Self‐powered flexible photodetectors without an external power source can meet the demands of next‐generation portable and wearable nanodevices; however, the performance is far from satisfactory becuase of the limited match of flexible substrates and light‐sensitive materials with proper energy levels. Herein, a novel self‐powered flexible fiber‐shaped photodetector based on double‐twisted perovskite–TiO₂–carbon fiber and CuO–Cu₂O–Cu wire is designed and fabricated. The device shows an ultrahigh detectivity of 2.15 × 10¹³ Jones under the illumination of 800 nm light at zero bias. CuO–Cu₂O electron block bilayer extends response range of perovskite from 850 to 1050 nm and suppresses dark current down to 10^?11 A. The fast response speed of less than 200 ms is nearly invariable after dozens of cycles of bending at the extremely 90 bending angle, demonstrating excellent flexibility and bending stability. These parameters are comparable and even better than reported flexible and even rigid photodetectors. The present results suggest a promising strategy to design photodetectors with integrated function of self‐power, flexibility, and broadband response.     

A Self‐Powered and Flexible Organometallic Halide Perovskite Photodetector with Very High Detectivity

Flexible and self‐powered photodetectors (PDs) are highly desirable for applications in image sensing, smart building, and optical communications. In this paper, a self‐powered and flexible PD based on the methylammonium lead iodide (CH₃NH₃PBI₃) perovskite is demonstrated. Such a self‐powered PD can operate even with irregular motion such as human finger tapping, which enables it to work without a bulky external power source. In addition, with high‐quality CH₃NH₃PBI₃ perovskite thin film fabricated with solvent engineering, the PD exhibits an impressive detectivity of 1.22 × 10¹³ Jones. In the self‐powered voltage detection mode, it achieves a large responsivity of up to 79.4 V mW^?1 cm^?2 and a voltage response of up to ≈90%. Moreover, as the PD is made of flexible and transparent polymer films, it can operate under bending and functions at 360 ° of illumination. As a result, the self‐powered, flexible, 360 ° omnidirectional perovskite PD, featuring high detectivity and responsivity along with real‐world sensing capability, suggests a new direction for next‐generation optical communications, sensing, and imaging applications.     

UV Photodetectors Based on BiOCl Nanosheet Arrays: The Effects of Morphologies and Electrode Configurations

A facile chemical bath method is adopted to grow bismuth oxychloride (BiOCl) nanosheet arrays on a piece of Cu foil (denoted as BiOCl‐Cu) and isolated BiOCl nanosheets are collected by ultrasonication. A self‐supporting BiOCl film is obtained by the removal of Cu foil. Photodetectors (PDs) based on these BiOCl materials are assembled and the effects of morphologies and electrode configurations on the photoelectric performance of these PDs are examined. The BiOCl nanosheet PD achieves high responsivities in the spectral range from 250 to 350 nm, while it presents quite a small photocurrent and slow response speed. The BiOCl film PD yields low photocurrents and near‐unity on–off ratios, demonstrating poor photoelectric performance. The photocurrent of the BiOCl‐Cu PD with both electrodes on the BiOCl film is much higher than those of these above‐mentioned PDs, and the response times are fast. Meanwhile, the BiOCl‐Cu PD with separate electrodes on the BiOCl film and Cu foil achieves even higher photocurrents and presents a self‐powering characteristic, depicting the improved photodetecting performances induced by the specific morphology and distinct electrode configuration. These results would promote the applications of BiOCl nanostructures in the photoelectric devices.     

High‐Performance Flexible Photodetectors based on High‐Quality Perovskite Thin Films by a Vapor–Solution Method

Organometal halide perovskites are new light‐harvesting materials for lightweight and flexible optoelectronic devices due to their excellent optoelectronic properties and low‐temperature process capability. However, the preparation of high‐quality perovskite films on flexible substrates has still been a great challenge to date. Here, a novel vapor–solution method is developed to achieve uniform and pinhole‐free organometal halide perovskite films on flexible indium tin oxide/poly(ethylene terephthalate) substrates. Based on the as‐prepared high‐quality perovskite thin films, high‐performance flexible photodetectors (PDs) are constructed, which display a nR value of 81 A W^?1 at a low working voltage of 1 V, three orders higher than that of previously reported flexible perovskite thin‐film PDs. In addition, these flexible PDs exhibit excellent flexural stability and durability under various bending situations with their optoelectronic performance well retained. This breakthrough on the growth of high‐quality perovskite thin films opens up a new avenue to develop high‐performance flexible optoelectronic devices.     

2D In2S3 Nanoflake Coupled with Graphene toward High‐Sensitivity and Fast‐Response Bulk‐Silicon Schottky Photodetector

Silicon‐based electronic devices, especially graphene/Si photodetectors (Gr/Si PDs), have triggered tremendous attention due to their simple structure and flexible integration of the Schottky junction. However, due to the relatively poor light–matter interaction and mobility of silicon, these Gr/Si PDs typically suffer an inevitable compromise between photoresponsivity and response speed. Herein, a novel strategy for coupling 2D In₂S₃ with Gr/Si PDs is demonstrated. The introduction of the double‐heterojunction design not only strengthens the light absorption of graphene/Si but also combines the advantages of the photogating effect and photovoltaic effect, which suppresses the dark current, accelerates the separation of photogenerated carriers, and brings photoconductive gain. As a result, In₂S₃/graphene/Si devices present an ultrahigh photoresponsivity of 4.53 × 10⁴ A W^?1 and fast response speed less than 40 µs, simultaneously. These parameters are an order of magnitude higher than pristine Gr/Si PDs and among the best values compared with reported 2D materials/Si heterojunction PDs. Furthermore, the In₂S₃/graphene/Si PD expresses outstanding long‐term stability, with negligible performance degradation even after 1 month in air or 1000 cycles of operation. These findings highlight a simple and novel strategy for constructing high‐sensitivity and ultrafast Gr/Si PDs for further optoelectronic applications.     

Enhanced Photodetection Properties of Tellurium@Selenium Roll‐to‐Roll Nanotube Heterojunctions

Non‐layered tellurium (Te) is a promising material for applications in transistor and optoelectronic devices for its advantages in excellent intrinsic electronic and optoelectronic properties. However, the poor photodetection performance and relatively uncertain stability of tellurene under ambient conditions greatly limit the practical applications. In order to improve the performance of tellurene‐based materials, Te@Se roll‐to‐roll nanotubes with different selenium (Se) contents synthesized by epitaxial growth of Se on Te nanotubes are, for the first time, employed to fabricate working electrodes for photoelectrochemical (PEC)‐type broadband photodetection. They exhibit not only a preferably enhanced capacity for self‐powered broadband photodetection but also significantly improved photocurrent density and stability in various aqueous environments (HCl, NaCl, and KOH solutions), compared to tellurene‐based photodetectors. It is anticipated that the present work can open up new possibilities for high‐performance tellurene‐based optoelectronic devices.     

Self‐Powered,Flexible, and Solution‐Processable Perovskite Photodetector Based on Low‐Cost Carbon Cloth

Flexible perovskite photodetectors are usually constructed on indium‐tin‐oxide‐coated polymer substrates, which are expensive, fragile, and not resistant to high temperature. Herein, for the first time, a high‐performance flexible perovskite photodetector is fabricated based on low‐cost carbon cloth via a facile solution processable strategy. In this device, perovskite microcrystal and Spiro‐OMeTAD (hole transporting material) blended film act as active materials for light detection, and carbon cloth serves as both a flexible substrate and a conductive electrode. The as‐fabricated photodetector shows a broad spectrum response from ultraviolet to near‐infrared light, high responsivity, fast response speed, long‐term stability, and self‐powered capability. Flexible devices show negligible degradation after several tens of bending cycles and at the extremely bending angle of 180°. This work promises a new technique to construct flexible, high‐performance photodetectors with low cost and self‐powered capability.     

Perovskite/Organic Bulk‐Heterojunction Integrated Ultrasensitive Broadband Photodetectors with High Near‐Infrared External Quantum Efficiency over 70%

Ultraviolet‐visible‐near infrared (UV‐Vis‐NIR) broadband detection is important for image sensing, communication, and environmental monitoring, yet remains as a challenge in achieving high external quantum efficiency (EQE) in the broad spectrum range. Herein, sensitive broadband integrated photodetectors (PDs) with high EQE levels are reported. The organic bulk‐heterojunction (OBHJ) layer, based on a NIR sensitive organic acceptor, is employed to extend the response spectrum of the perovskite PDs. A key strategy of introducing dual electron transport materials respectively for Vis and NIR regions into the active layer of integrated PDs is applied. Further combined with the proper energy level alignment and reasonable distribution of PC₆₁BM in the active layer, the extraction and transport of photo induced charges in between perovskite and OBHJ is promoted efficiently. The integrated PD with the optimized structure exhibits an EQE mostly beyond 70% in the Vis–NIR region, which is the highest value among the ever reported solution‐processable broadband PDs. The highest responsivity is 0.444 and 0.518 A W^?1 in the Vis and NIR region, respectively. The specific detectivity is beyond 10¹⁰ Jones in the range from 340 to 940 nm, enabling the device to detect weak signals in the UV to NIR broad region.     

Gradient Energy Band Driven High‐Performance Self‐Powered Perovskite/CdS Photodetector

Self‐powered photodetectors are highly desired to meet the great demand in applications of sensing, communication, and imaging. Manipulating the carrier separation and recombination is critical to achieve high performance. In this paper, a self‐powered photodetector based on the integrated gradient O‐doped CdS nanorod array and perovskite is presented. Through optimizing the degree of continuous built‐in band bending in the gradient‐O CdS, the photodetector demonstrates a remarkable detectivity of 2.1 × 10¹³ Jones. Under the self‐powered voltage mode, the responsivity can be as high as 0.48 A W^?1, and the rise and decay time are 0.54/2.21 ms. The comprehensive performance is comparable and even better than reported perovskite and other types of self‐powered photodetectors. The improved mechanism reveals that the gradient band bending promotes the photogenerated carrier transfer and hinders the recombination at the interface.     

Anisotropic Broadband Photoresponse of Layered Type‐II Weyl Semimetal MoTe2

Photodetectors based on Weyl semimetal promise extreme performance in terms of highly sensitive, broadband and self‐powered operation owing to its extraordinary material properties. Layered Type‐II Weyl semimetal that break Lorentz invariance can be further integrated with other two‐dimensional materials to form van der Waals heterostructures and realize multiple functionalities inheriting the advantages of other two‐dimensional materials. Herein, we report the realization of a broadband self‐powered photodetector based on Type‐II Weyl semimetal T_d‐MoTe₂. The prototype metal–MoTe₂–metal photodetector exhibits a responsivity of 0.40 mA W^?1 and specific directivity of 1.07 × 10⁸ Jones with 43 μs response time at 532 nm. Broadband responses from 532 nm to 10.6 μm are experimentally tested with a potential detection range extendable to far‐infrared and terahertz. Furthermore, we identify the response of the detector is polarization angle sensitive due to the anisotropic response of MoTe₂. The anisotropy is found to be wavelength dependent, and the degree of anisotropy increases as the excitation wavelength gets closer to the Weyl nodes. In addition, with power and temperature dependent photoresponse measurements, the photocurrent generation mechanisms are investigated. Our results suggest this emerging class of materials can be harnessed for broadband angle sensitive, self‐powered photodetection with decent responsivities.     

Ultra‐Broadband Flexible Photodetector Based on Topological Crystalline Insulator SnTe with High Responsivity

Topological crystalline insulators (TCIs) are predicted to be a promising candidate material for ultra‐broadband photodetectors ranging from ultraviolet (UV) to terahertz (THz) due to its gapless surface state and narrow bulk bandgap. However, the low responsivity of TCIs‐based photodetectors limits their further applications. In this regard, a high‐performance photodetector based on SnTe, a recently developed TCI, working in a broadband wavelength range from deep UV to mid‐IR with high responsivity is reported. By taking advantage of the strong light absorption and small bandgap of SnTe, photodetectors based on the as‐grown SnTe crystalline nanoflakes as well as specific short channel length achieve a high responsivity (71.11 A W^?1 at 254 nm, 49.03 A W^?1 at 635 nm, 10.91 A W^?1 at 1550 nm, and 4.17 A W^?1 at 4650 nm) and an ultra‐broad spectral response (254–4650 nm) simultaneously. Moreover, for the first time, a durable flexible SnTe photodetector fabricated directly on a polyethylene terephthalate film is demonstrated. These results prove the great potential of TCIs as a promising material for integrated and flexible optoelectronic devices.     

High‐Quality Hexagonal Nonlayered CdS Nanoplatelets for Low‐Threshold Whispering‐Gallery‐Mode Lasing

Low threshold micro/nanolasers have attracted extensive attention for wide applications in high‐density storage and optical communication. However, constrained by quantum efficiency and crystalline quality, conventional semiconductor small‐sized lasers are still subjected to a high lasing threshold. In this work, a low‐threshold planar laser based on high‐quality single‐crystalline hexagonal CdS nanoplatelets (NPLs) using a self‐limited epitaxial growth method is demonstrated. The as‐grown CdS NPLs show multiple whispering‐gallery‐mode lasing at room temperature with a threshold of ≈0.6 µJ cm^?2, which is the lowest value among reported CdS‐based lasers. Through power‐dependent lasing studies at 77 K, the lasing action is demonstrated to originate from a exciton–exciton scattering process. Furthermore, the edge length‐ and thickness‐dependent lasing threshold studies reveal that the threshold is inversely proportional to the second power of lateral edge length while partially affected by vertical thickness, and the lasing modes can be sustained in NPLs as thin as 60 nm. The lowest threshold emerges with the thickness of ≈110 nm due to stronger energy confinement in the vertical Fabry–Pérot cavity. The results not only open up a new avenue to fabricate nonlayered material‐based coherent light sources, but also advocate the promise of nonlayered semiconductor materials for the development of novel optoelectronic devices.     

Regulation of Charge Carrier Dynamics in ZnO Microarchitecture‐Based UV/Visible Photodetector via Photonic‐Strain Induced Effects

A feasible, morphological influence on photoresponse behavior of ZnO microarchitectures such as microwire (MW), coral‐like microstrip (CMS), fibril‐like clustered microwire (F‐MW) grown by one‐step carrier gas/metal catalyst “free” vapor transport technique is reported. Among them, ZnO F‐MW exhibits higher photocurrent (I_Ph) response, i.e., I_{Ph/ZnO F‐MW} > I_{Ph/ZnO CMS} > I_{Ph/ZnO MW}. The unique structural alignment of ZnO F‐MW has enhanced the I_Ph from 14.2 to 186, 221, 290 µA upon various light intensities such as 0 to 6, 11, 17 mW cm^?2 at λ_{405 nm}. Herein, the nature of the as‐fabricated ZnO photodetector (PD) is also demonstrated modulated by tuning the inner crystals piezoelectric potential through the piezo‐phototronic effect. The I_Ph response of PD decreases monotonically by introducing compressive strain along the length of the device, which is due to the synergistic effect between the induced piezoelectric polarization and photogenerated charge carriers across the metal–semiconductor interface. The current behavior observed at the two interfaces acting as the source (S) and drain (D) is carefully investigated by analyzing the Schottky barrier heights (Φ_SB). This work can pave the way for the development of geometrically modified strain induced performances of PD to promote next generation self‐powered optoelectronic integrated devices and switches.     

Highly Efficient and Ultrasensitive Large‐Area Flexible Photodetector Based on Perovskite Nanowires

Hybrid organic–inorganic perovskites have shown exceptional semiconducting properties and microstructural versatility for inexpensive, solution‐processable photovoltaic and optoelectronic devices. In this work, an all‐solution‐based technique in ambient environment for highly sensitive and high‐speed flexible photodetectors using high crystal quality perovskite nanowires grown on Kapton substrate is presented. At 10 V, the optimized photodetector exhibits a responsivity as high as 0.62 A W^?1, a maximum specific detectivity of 7.3 × 10¹² cm Hz^1/2 W^?1, and a rise time of 227.2 µs. It also shows remarkable photocurrent stability even beyond 5000 bending cycles. Moreover, a deposition of poly(methyl methacrylate) (PMMA) as a protective layer on the perovskite yields significantly better stability under ambient air operation: the PMMA‐protected devices are stable for over 30 days. This work demonstrates a cost‐effective fabrication technique for high‐performance flexible photodetectors and opens opportunities for research advancements in broadband and large‐scale flexible perovskite‐based optoelectronic devices.     

低维结构策略构筑基于钙钛矿纳米片/氧化锌纳米线的柔性宽光谱探测器（英文）

柔性光电探测器具有轻便、易携带和优异的大面积兼容性等特点,在下一代光电子器件领域具有巨大的应用潜力.柔性光电探测器面临的主要挑战是在反复弯曲、拉伸、折叠等形变状态下难以保持优异的性能.本文通过低维度结构策略构筑了基于CsPbBr3纳米片和ZnO纳米线的柔性光电探测器.得益于一维纳米线和二维纳米片的高柔性,所构筑的光电探测器在各种应力下表现出优异的工作稳定性.例如,在弯曲1000次之后,器件的性能没有明显变化.此外,由于ZnO和CsPbBr3自身的光吸收特性,所构筑的柔性光电探测器展现出宽光谱光电响应能力(涵盖紫外和可见波段).在紫外和可见区域的峰值响应度分别为3.10和0.97 A W^-1,其相应的探测率分别为5.57×10^12和1.71×10^12Jones.本文针对柔性、高性能集成光电探测器提出的维度构筑策略,在未来智能、可穿戴光电子器件领域有着巨大的应用前景.     

Electrically Pumped White‐Light‐Emitting Diodes Based on Histidine‐Doped MoS2 Quantum Dots

MoS₂ quantum dots (QDs)‐based white‐light‐emitting diodes (QD‐WLEDs) are designed, fabricated, and demonstrated. The highly luminescent, histidine‐doped MoS₂ QDs synthesized by microwave induced fragmentation of 2D MoS₂ nanoflakes possess a wide distribution of available electronic states as inferred from the pronounced excitation‐wavelength‐dependent emission properties. Notably, the histidine‐doped MoS₂ QDs show a very strong emission intensity, which exceeds seven times of magnitude larger than that of pristine MoS₂ QDs. The strongly enhanced emission is mainly attributed to nitrogen acceptor bound excitons and passivation of defects by histidine‐doping, which can enhance the radiative recombination drastically. The enabled electroluminescence (EL) spectra of the QD‐WLEDs with the main peak around 500 nm are found to be consistent with the photoluminescence spectra of the histidine‐doped MoS₂ QDs. The enhanced intensity of EL spectra with the current increase shows the stability of histidine‐doped MoS₂ based QD‐WLEDs. The typical EL spectrum of the novel QD‐WLEDs has a Commission Internationale de l'Eclairage chromaticity coordinate of (0.30, 0.36) exhibiting an intrinsic broadband white‐light emission. The unprecedented and low‐toxicity QD‐WLEDs based on a single light‐emitting material can serve as an excellent alternative for using transition metal dichalcogenides QDs as next generation optoelectronic devices.     

2D Perovskite Sr2Nb3O10 for High-Performance UV Photodetectors

2D perovskites, due to their unique properties and reduced dimension, are promising candidates for future optoelectronic devices. However, the development of stable and nontoxic 2D wide-bandgap perovskites remains a challenge. 2D all-inorganic perovskite Sr₂Nb₃O₁₀ (SNO) nanosheets with thicknesses down to 1.8 nm are synthesized by liquid exfoliation, and for the first time, UV photodetectors (PDs) based on individual few-layer SNO sheets are investigated. The SNO sheet-based PDs exhibit excellent UV detecting performance (narrowband responsivity = 1214 A W⁻¹, external quantum efficiency = 5.6 × 10⁵%, detectivity = 1.4 × 10¹⁴ Jones @270 nm, 1 V bias), and fast response speed (t_rise ≈ 0.4 ms, t_decay ≈ 40 ms), outperforming most reported individual 2D sheet-based UV PDs. Furthermore, the carrier transport properties of SNO and the performance of SNO-based phototransistors are successfully controlled by gate voltage. More intriguingly, the photodetecting performance and carrier transport properties of SNO sheets are dependent on their thickness. In addition, flexible and transparent PDs with high mechanical stability are easily fabricated based on SNO nanosheet film. This work sheds light on the development of high-performance optoelectronics based on low-dimensional wide-bandgap perovskites in the future.     

Near‐Infrared Photodetectors Based on MoTe2/Graphene Heterostructure with High Responsivity and Flexibility

2D transition metal dichalcogenides (TMDCs) have attracted considerable attention due to their impressively high performance in optoelectronic devices. However, efficient infrared (IR) photodetection has been significantly hampered because the absorption wavelength range of most TMDCs lies in the visible spectrum. In this regard, semiconducting 2D MoTe₂ can be an alternative choice owing to its smaller band gap ≈1 eV from bulk to monolayer and high carrier mobility. Here, a MoTe₂/graphene heterostructure photodetector is demonstrated for efficient near‐infrared (NIR) light detection. The devices achieve a high responsivity of ≈970.82 A W^?1 (at 1064 nm) and broadband photodetection (visible‐1064 nm). Because of the effective photogating effect induced by electrons trapped in the localized states of MoTe₂, the devices demonstrate an extremely high photoconductive gain of 4.69 × 10⁸ and detectivity of 1.55 × 10¹¹ cm Hz^1/2 W^?1. Moreover, flexible devices based on the MoTe₂/graphene heterostructure on flexible substrate also retains a good photodetection ability after thousands of times bending test (1.2% tensile strain), with a high responsivity of ≈60 A W^?1 at 1064 nm at V _DS = 1 V, which provides a promising platform for highly efficient, flexible, and low cost broadband NIR photodetectors.     

Atomic‐Layer Deposition‐Assisted Double‐Side Interfacial Engineering for High‐Performance Flexible and Stable CsPbBr3 Perovskite Photodetectors toward Visible Light Communication Applications

Self‐powered photodetectors (PDs) based on inorganic metal halide perovskites are regarded as promising alternatives for the next generation of photodetectors. However, uncontrollable film growth and sluggish charge extraction at interfaces directly limit the sensitivity and response speed of perovskite‐based photodetectors. Herein, by assistance of an atomic layer deposition (ALD) technique, CsPbBr₃ perovskite thin films with preferred orientation and enlarged grain size are obtained on predeposited interfacial modification layers. Thanks to improved film quality and double side interfacial engineering, the optimized CsPbBr₃ (Al₂O₃/CsPbBr₃/TiO₂, ACT) perovskite PDs exhibit outstanding performance with ultralow dark current of 10^?11 A, high detectivity of 1.88 × 10¹³ Jones and broad linear dynamic range (LDR) of 172.7 dB. Significantly, excellent long‐term environmental stability (ambient conditions >100 d) and flexibility stability (>3000 cycles) are also achieved. The remarkable performance is credited to the synergistic effects of high carrier conductivity and collection efficiency, which is assisted by ALD modification layers. Finally, the ACT PDs are successfully integrated into a visible light communication system as a light receiver on transmitting texts, showing a bit rate as high as 100 kbps. These results open the window of high performance all‐inorganic halide perovskite photodetectors and extends to rational applications for optical communication.