Grafting of water‐soluble sulfonated monomers onto functionalized fumed silica nanoparticles via surface‐initiated redox polymerization in aqueous medium

Sulfonated polymer/fumed silica hybrid nanoparticles were prepared via surface‐initiated free radical polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (PAMPS‐g‐FSN), styrene sulfonic acid sodium salt (PSSA‐g‐FSN) and vinyl sulfonic acid sodium salt (PVSA‐g‐FSN) from the surface of aminopropyl‐functionalized fumed silica nanoparticles (AFSNs) dispersed in aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer respectively. AFSNs were prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of fumed silica nanoparticles. Sulfonated monomers (AMPS, SSA or VSA) were then grafted onto the AFSNs ultrasonically dispersed in water via redox initiation at 40 °C. Structure, thermal properties, particle size and morphology of the AFSNs and PAMPS‐g‐FSN, PSSA‐g‐FSN and PVSA‐g‐FSN hybrid nanoparticles were characterized by Fourier transform infrared spectroscopy, TGA, SEM, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The results indicated that the sulfonated monomers were successfully grafted onto the fumed silica nanoparticles. Grafting amounts of the sulfonated polymers onto the fumed silica nanoparticle surface were estimated from TGA thermograms to be 59%, 13% and 29% for the PAMPS, PSSA and PVSA, respectively. From SEM, TEM and DLS analysis, polymer‐grafted fumed silica nanoparticles with an average diameter smaller than 70 nm and a (semi‐) spherical shape were observed. A significant bimodal particle size distribution was observed only for the PAMPS‐g‐FSN with average diameters of 39.6 nm (84.1% per number) and 106 nm (15.9% per number). The hydrophilic sulfonated polymer/grafted fumed silica obtained from the redox graft polymerization gave a stable colloidal dispersion in acidic aqueous medium. Copyright © 2012 Society of Chemical Industry     

Grafting of hydrophilic monomers onto aminopropyl‐functionalized sodium montmorillonite via surface‐initiated redox polymerization

Hydrophilic polymer/sodium montmorillonite (Na‐MMT) hybrid nanomaterials were prepared via surface‐initiated redox polymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (PAMPS‐g‐MMT), acrylamide (PAAm‐g‐MMT) and styrenesulfonic acid sodium salt (PSSA‐g‐MMT) from surface of aminopropyl‐functionalized sodium montmorillonite (AMMT) dispersed in an aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and aminopropyl groups on the surface of AMMT were used as oxidant and reducing groups, respectively. AMMT was prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of Na‐MMT. Hydrophilic monomers (AMPS, AAm and SSA) were then grafted onto AMMT dispersed in water via redox initiation at 40 °C. Structure, morphology and thermal properties of the AMMT, PAMPS‐g‐MMT, PAAm‐g‐MMT and PSSA‐g‐MMT hybrid materials were characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric (TGA) analyses, respectively. FTIR results indicated that hydrophilic monomers were successfully grafted onto the surface of MMT. Grafting amounts of the hydrophilic polymers were estimated from TGA thermograms to be 28.8, 118.8 and 14.4% for PAMPS, PAAm and PSSA, respectively. XRD patterns showed an exfoliated morphology for PAMPS‐ and PAAm‐grafted MMT hybrid nanomaterials and an intercalated/exfoliated morphology for the PSSA‐grafted MMT one. The effect of the nature of hydrophilic monomer on the grafting efficiency is discussed in detail. © 2013 Society of Chemical Industry     

A novel route for the synthesis of poly(2‐hydroxyethyl methacrylate) grafted TiO2 nanoparticles via surface thiol‐lactam initiated radical polymerization

Hybrid nanocomposites of poly(2‐hydroxyethyl methacrylate) (PHEMA) and TiO₂ nanoparticles were synthesized via surface thiol‐lactam initiated radical polymerization by following the grafting from strategy. Initially, TiO₂ nanoparticles were modified by 3‐mercaptopropyl trimethoxysilane to prepare thiol functionalized TiO₂ nanoparticles (TiO₂? SH). Subsequently, surface initiated polymerization of 2‐hydroxyethyl methacrylate was conducted by using TiO₂? SH and butyrolactam as an initiating system. The anchoring of PHEMA onto the surface of TiO₂ nanoparticles was investigated by FTIR, ¹H‐NMR, XPS, TGA, and XRD analyses. The experimental results indicated a strong interaction between PHEMA and TiO₂ nanoparticles owing to covalent bonding. The TEM and SEM images of PHEMA‐g‐TiO₂ showed that the agglomeration propensity of TiO₂ nanoparticles was significantly reduced upon the PHEMA functionalization. The molecular weight and polydispersity index of the cleaved PHEMA from the surface of TiO₂ nanocomposites were estimated by GPC analysis. An improved thermal property of the nanocomposites was observed from TGA analysis. PHEMA‐g‐TiO₂ nanocomposites were found to be highly dispersible in organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermally and mechanically enhanced epoxy resin‐silica hybrid materials containing primary amine‐modified silica nanoparticles

In this article, a series of hybrid materials consisted of epoxy resin matrix and well‐dispersed amino‐modified silica (denoted by AMS) nanoparticles were successfully prepared. First of all, the AMS nanoparticles were synthesized by performing the conventional acid‐catalyzed sol–gel reactions of tetraethyl orthosilicate (TEOS), which acts as acceded sol–gel precursor in the presence of 3‐aminopropyl trimethoxysilane (APTES), a silane coupling agent molecules. The as‐prepared AMS nanoparticles were then characterized by FTIR, ¹³C‐NMR, and ²⁹Si‐NMR spectroscopy. Subsequently, a series of hybrid materials were prepared by performing in situ thermal ring‐opening polymerization reactions of epoxy resin in the presence of as‐prepared AMS nanoparticles and raw silica (RS) particles (i.e., pristine silica). AMS nanoparticles were found to show better dispersion capability in the polymer matrices than that of RS particles based on the morphological observation of transmission electron microscopy (TEM) study. The better dispersion capability of AMS nanoparticles in hybrid materials was found to lead enhanced thermal, mechanical properties, reduced moisture absorption, and gas permeability based on the measurements of thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and gas permeability analysis (GPA), respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel core‐shell magnetic nanogels based on 2‐acrylamido‐2‐methylpropane sulfonic acid in aqueous media

Ultrafine well‐dispersed Fe₃O₄ magnetic nanoparticles were directly prepared in aqueous solution using controlled coprecipitation method. The synthesis of Fe₃O₄/poly (2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS), Fe₃O₄/poly (acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AM‐co‐AMPS) and Fe₃O₄/poly (acrylic acid‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AA‐co‐AMPS) ‐core/shell nanogels are reported. The nanogels were prepared via crosslinking copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid, acrylamide and acrylic acid monomers in the presence of Fe₃O₄ nanoparticles, N,N′‐methylenebisacrylamide (MBA) as a crosslinker, N,N,N′,N′‐tetramethylethylenediamine (TEMED) and potassium peroxydisulfate (KPS) as redox initiator system. The results of FTIR and ¹H‐NMR spectra indicated that the compositions of the prepared nanogels are consistent with the designed structure. X‐ray powder diffraction (XRD) and transmission electron microscope (TEM) measurements were used to determine the size of both magnetite and stabilized polymer coated magnetite nanoparticles. The data showed that the mean particle size of synthesized magnetite (Fe₃O₄) nanoparticles was about 10 nm. The diameter of the stabilized polymer coated Fe₃O₄ nanogels ranged from 50 to 250 nm based on polymer type. TEM micrographs proved that nanogels possess the spherical morphology before and after swelling. These nanogels exhibited pH‐induced phase transition due to protonation of AMPS copolymer chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel fluorescent porous hyperbranched aromatic polyamide containing 1,3,5‐triphenylbenzene moieties: Synthesis and characterization

In this thesis, two novel porous hyperbranched poly(1,3,5‐tris(4‐carboxyphenyl) benzene p ‐phenylenediamine) amides with different terminal functional groups are synthesized through an A₂ + B₃ approach using 1,3,5‐tri(4‐carboxyl phenyl) benzene (H₃BTB) and p ‐phenylenediamine as raw material, N ‐methyl‐pyrrolidone as solvent, triphenyl phosphite and pyridine as dehydrating agent, by means of regulating the mole ratio of the monomers. The chemical structures of the prepared hyperbranched polymers are characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR) analysis. These two polymers can be soluble in dimethyl sulfoxide (DMSO) and N ,N ‐dimethyl formamide (DMF). Their DMSO solutions exhibit strong blue fluorescence, especially for the amino terminated polymer HP‐NH₂. While in DMF solution, the two polymers emit strong green fluorescence. These two polymers are porous polymers with the Brunauer?Emmett?Teller surface areas of 4.53 and 24.52 m²/g for HP‐COOH and HP‐NH₂, respectively. They are potential useful in the areas of storage, separation, catalysis, and light emitting. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44505.     

Fabrication of BaZr0.1Ce0.7Y0.2O3 – δ ‐Based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Dense proton‐conducting BaZr_0.1Ce_0.7Y_0.2O_{3 – δ} (BZCY) electrolyte membranes were successfully fabricated on NiO–BZCY anode substrates at a low temperature of 1,150 °C via a combined co‐press and co‐firing process. To fabricate full cells, the LaSr₃Co_1.5Fe_1.5O_{10 – δ}–BZCY composite cathode layer was fixed to the electrolyte membrane by two means of one‐step co‐firing and two‐step co‐firing, respectively. The SEM results revealed that the cathode layer bonded more closely to the electrolyte membrane via the one‐step co‐firing process. Correspondingly, determined from the electrochemical impedance spectroscopy measured under open current conditions, the electrode polarisation and Ohmic resistances of the one‐step co‐fired cell were dramatically lower than the other one for its excellent interface adhesion. With humidified hydrogen (2% H₂O) as the fuel and static air as the oxidant, the maximum power density of the one‐step co‐fired single cell achieved 328 mW cm^–2 at 700 °C, showing a much better performance than that of the two‐step co‐fired single cell, which was 264 mW cm^–2 at 700 °C.     

Effect of 3‐aminopropyltriethoxysilane on properties of poly(butyl acrylate‐co‐maleic anhydride)/silica hybrid materials

The transparent poly(butyl acrylate‐co‐maleic anhydride)/silica [P(BA‐co‐MAn)/SiO₂] has been successfully prepared from butyl acrylate‐maleic anhydride copolymer P(BA‐co‐MAn) and tetraethoxysilane (TEOS) in the presence of 3‐aminopropyltriethoxysilane (APTES) by an in situ sol–gel process. Triethoxysilyl group can be readily incorporated into P(BA‐co‐MAn) as pendant side chains by the aminolysis of maleic anhydride unit of copolymer with APTES, and then organic polymer/silica hybrid materials with covalent bonds between two phases can be formed via the hydrolytic polycondensation of triethoxysilyl group‐functionalized polymer with TEOS. It was found that the amount of APTES could dramatically affect the gel time of sol–gel system, the sol fraction of resultant hybrid materials, and the thermal properties of hybrid materials obtained. The decomposition temperature of hybrid materials and the final residual weight of thermogravimetry of hybrid both increase with the increasing of APTES. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that the morphology of hybrid materials prepared in the presence of APTES was a co‐continual phase structure. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 419–424, 1999     

Novel electrically conductive and ferromagnetic composites of poly(aniline‐co‐aminonaphthalenesulfonic acid) with iron oxide nanoparticles: Synthesis and characterization

Nanocomposites of iron oxide (Fe₃O₄) with a sulfonated polyaniline, poly(aniline‐co‐aminonaphthalenesulfonic acid) [SPAN(ANSA)], were synthesized through chemical oxidative copolymerization of aniline and 5‐amino‐2‐naphthalenesulfonic acid/1‐amino‐5‐naphthalenesulfonic acid in the presence of Fe₃O₄ nanoparticles. The nanocomposites [Fe₃O₄/SPAN(ANSA)‐NCs] were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, elemental analysis, UV–visible spectroscopy, thermogravimetric analysis (TGA), superconductor quantum interference device (SQUID), and electrical conductivity measurements. The TEM images reveal that nanocrystalline Fe₃O₄ particles were homogeneously incorporated within the polymer matrix with the sizes in the range of 10–15 nm. XRD pattern reveals that pure Fe₃O₄ particles are having spinel structure, and nanocomposites are more crystalline in comparison to pristine polymers. Differential thermogravimetric (DTG) curves obtained through TGA informs that polymer chains in the composites have better thermal stability than that of the pristine copolymers. FTIR spectra provide information on the structure of the composites. The conductivity of the nanocomposites (～ 0.5 S cm^?1) is higher than that of pristine PANI (～ 10^?3 S cm^?1). The charge transport behavior of the composites is explained through temperature difference of conductivity. The temperature dependence of conductivity fits with the quasi‐1D variable range hopping (quasi‐1D VRH) model. SQUID analysis reveals that the composites show ferromagnetic behavior at room temperature. The maximum saturation magnetization of the composite is 9.7 emu g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of p‐perfluoro{1‐[2‐(2‐fluorosulfonyl‐ethoxy)propoxy]}ethylated poly(α‐methyl styrene)

p‐Perfluoro{1‐[2‐(2‐fluorosulfonyl‐ethoxy)propoxy]}ethylated poly(α‐ methyl styrene) 3 was synthesized via electron transfer of perfluoro‐di{2‐[2‐(2‐fluorosulfonyl‐ethoxy)propoxy]}propionyl peroxide 2 and poly(α‐methyl styrene) 1 at different reactant molar ratios (2 : 1). The modified polymer 3 was characterized by various techniques. The ring p‐substitution was proved by FTIR and ¹⁹FNMR. The desulfonation appeared at above 124°C was found by TGA. The molecular weight determined by GPC increased with the increase of reactant molar ratio, and the polydispersity values indicated there was no degradation of the parent polymer chain in the reaction. Followed by hydrolysis and acidification, the modified polymer 3 could be further quantitatively converted into its sulfonic form 4. Ion exchange capacity of novel polyelectrolyte 4 can be controlled by changing reactant molar ratio (2 : 1). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3615–3618, 2006     

Gadolinium‐conjugated FA‐PEG‐PAMAM‐COOH nanoparticles as potential tumor‐targeted circulation‐prolonged macromolecular MRI contrast agents

The aim of research is to develop potential tumor‐targeted circulation‐prolonged macromolecular magnetic resonance imaging (MRI) contrast agents without the use of low molecular gadolinium (Gd) ligands. The contrast agents were based on polymer–metal complex nanoparticles with controllable particle size to achieve the active and passive tumor‐targeted potential. In particular, poly (amidoamine) (PAMAM) dendrimer with 32 carboxylic groups was modified with folate‐conjugated poly (ethyleneglycol) amine (FA‐PEG‐NH₂, M_w: 2 k and 4 kDa). FA‐PEG‐PAMAM‐Gd macromolecular MRI contrast agents were prepared by the complex reaction between the carboxylic groups in PAMAM and GdCl₃. The structure of FA‐PEG‐PAMAM‐COOH was confirmed by nuclear magnetic resonance (¹H‐NMR), Fourier transform infrared (FTIR) spectra, and electrospray ionization mass spectra (ESI‐MS). The mass percentage content of Gd (III) in FA‐PEG‐PAMAM‐Gd was measured by inductively coupled plasma‐atomic emission spectrometer (ICP‐AES). The sizes of these nanoparticles were about 70 nm measured by transmission electron microscopy, suggestion of their passive targeting potential to tumor tissue. In comparison with clinically available small molecular Gadopentetate dimeglumine, FA‐PEG‐PAMAM‐Gd showed comparable cytotoxicity and higher relaxation rate, suggestion of their great potential as tumor‐targeted nanosized macromolecular MRI contrast agents due to the overexpressed FA receptor in human tumor cell surfaces. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of poly{[α‐maleic anhydride‐ω‐methoxy‐poly(ethylene glycol)]‐co‐(ethyl cyanoacrylate)} copolymer nanoparticles

Poly{[α‐maleic anhydride‐ω‐methoxy‐poly(ethylene glycol)]‐co‐(ethyl cyanoacrylate)} (PEGECA) copolymers were prepared by radical polymerization of macromolecular poly(ethylene glycol) monomers (PEGylated) and ethyl 2‐cyanoacrylate in solvent. The structures of the copolymer were characterized by Fourier‐transform infrared (FTIR) and proton nuclear magnetic resonance (¹H‐NMR). The morphology and size of the PEGECA nanoparticles prepared by nanoprecipitation techniques were investigated by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS) methods. The results show that the PEGECA can self‐assemble into highly stable nanoparticles in aqueous media, and inner core and outer shell morphology. The size of the nanoparticles was strongly influenced by the solvent character and the copolymer concentration in the organic solvents. A hydrophobic drug, ibuprofen, was effectively incorporated into the nanoparticles, which provides a delivery system for ibuprofen and other hydrophobic compounds. Copyright © 2005 Society of Chemical Industry     

Entrapment of urease in poly(1‐vinyl imidazole)/poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) network

In this article, urease was immobilized in a conducting network via complexation of poly(1‐vinyl imidazole) (PVI) with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS). The preparation method for the polymer network was adjusted by using Fourier transform infrared (FTIR) spectroscopy. A scanning electron microscope (SEM) study revealed that enzyme immobilization had a strong effect on film morphology. The proton conductivity of the PVI/PAMPS network was measured via impedance spectroscopy, under humidified conditions. The basic characteristics (Michealis‐Menten constants, pH_opt, pH_stability, T_opt, T_stability, reusability, and storage stability) of the immobilized urease were determined. The obtained results showed that the PAA/PVI polymer network was suitable for enzyme immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modification of silica nanoparticles with hydrophilic sulfonated polymers by using surface-initiated redox polymerization

Sulfonated polymer/silica hybrid nanoparticles were prepared by free radical polymerization of 2-acrylamido-2-methyl-1-propane sulfonic acid (PAMPS-g-SN) and styrene sulfonic acid sodium salt (PSSA-g-SN), initiated on the surfaces of aminopropyl-functionalized silica nanoparticles (ASN). Ce(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer, respectively. ASN Nanoparticles were synthesized by a covalently attached 3-aminopropyltriethoxysilane onto the surface of silica nanoparticles. Sulfonated monomers (AMPS or SSA) were then grafted onto the ASN nanoparticles, ultrasonically dispersed in water, using redox initiator system at 40?°C. ASN, PAMPS-g-SN and PSSA-g-SN nanoparticles were characterized by Fourier transform infrared (FTIR), thermogravimetry, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. FTIR and TGA results indicated that both AMPS and SSA monomers were successfully grafted onto the silica nanoparticles. The grafted amounts of sulfonated polymers onto the silica nanoparticles were estimated from TGA thermograms to be 46 and 22?% for PAMPS and PSSA, respectively. From SEM and TEM micrographs, the average-diameters of the polymer-grafted silica nanoparticles were measured to be <50?nm with a (semi)spherical morphology, in which several silica nanoparticles were able to form a core with PAMPS or PSSA existing around the silica nanoparticles.     

Effect of the ZIF‐8 Distribution in Mixed‐Matrix Membranes Based on Matrimid® 5218‐PEG on CO2 Separation

In theory, the combination of inorganic materials and polymers may provide a synergistic performance for mixed‐matrix membranes (MMMs); however, the filler dispersion into the MMMs is a crucial technical parameter for obtaining compelling MMMs. The effect of the filler distribution on the gas separation performance of the MMMs based on Matrimid®‐PEG 200 and ZIF‐8 nanoparticles is demonstrated. The MMMs were prepared by two different membrane preparation procedures, namely, the traditional method and non‐dried metal‐organic framework (MOF) method. In CO₂/CH₄ binary mixtures, the MMMs were tested under fixed conditions and characterized by various methods. Finally, regardless of the MMM preparation procedure, the incorporation of 30 wt % ZIF‐8 nanoparticles allowed to increase the CO₂ permeability in MMMs. The ZIF‐8 dispersion influenced significantly the separation factor.     

Direct grafting of ε‐caprolactone on solid core/mesoporous shell silica spheres by surface‐initiated ring‐opening polymerization

Poly(?‐caprolactone) (PCL) was formed on Solid core/mesoporous shell (SCMS) silica surface by surface‐initiated ring‐opening polymerization (SI‐ROP). The SI‐ROP of ?‐caprolactone was achieved by heating a mixture of SCMS silica, ?‐caprolactone and the tin(II) 2‐ethylhexanoate [Sn(Oct)₂] in a anhydrous toluene for 20 h at different temperatures viz. 40, 60, and 80°C. The PCL grafted SCMS silica was characterized by fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X‐ray, differential scanning calorimetry and scanning electron microscopy (SEM). The FTIR spectroscopic analysis reveals the formation of ester linkage between PCL and hydroxyl terminated SCMS silica. TGA investigation shows increase in PCL content on SCMS silica surface with increase in reaction temperature. The SEM photographs clearly show the formation of PCL polymer on the SCMS silica surface without altering the spherical nature of SCMS silica. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(2‐hydroxyethyl methacrylate)‐functionalized Fe‐Au/core‐shell nanoparticles

Disulfide‐bearing poly(2‐hydroxyethyl methacrylate) (DT‐PHEMA) was synthesized by atom transfer radical polymerization technique, which was subsequently immobilized onto core‐shell structured Fe‐Au nanoparticles (Fe‐AuNPs) by applying a “grafting to” protocol to afford new PHEMA‐grafted Fe‐AuNPs (PHEMA‐g‐Fe‐AuNPs). The Fe‐AuNPs having the iron core of 20–22 nm and the gold layer of 1–2 nm were initially prepared by inverse micelle technique and characterized by XRD and high‐resolution transmission electron microscopy (HR‐TEM). The grafting of DT‐PHEMA on the Fe‐AuNPs was confirmed by Fourier transformed infrared spectrophotometer, thermogravimetric (TGA), X‐ray photoelectron spectroscopy, and energy dispersive X‐ray analyses. The average diameter of polymer coated Fe‐AuNPs was determined to be 28 nm by HR‐TEM analysis. The amount of the polymer on the surface of Fe‐AuNPs was calculated to be about 50% by TGA analysis. The studies of magnetic property by the superconducting quantum interference devices indicate the superparamagnetic property of Fe‐AuNPs and PHEMA‐g‐Fe‐AuNPs. The optical property of the PHEMA‐g‐Fe‐AuNPs was recorded by UV–visible absorption spectroscopy, and a redshift in the absorption was observed, which further suggests the PHEMA attachment on the surface of Fe‐AuNPs. The magnetic nanocomposites demonstrate good dispersibility in common polar solvents. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Using hydroxypropyl‐β‐cyclodextrin for the preparation of hydrophobic poly(ketoethyl methacrylate) in aqueous medium

This work was committed to the polymerization of hydrophobic ketoethyl methacrylate monomer in aqueous medium in the presence of cyclodextrin, instead of polymerizing the monomer in toxic and volatile organic solvents. For this purpose, a new ketoethyl methacrylate monomer, p‐methylphenacylmethacrylate (MPMA), was synthesized from the reaction of p‐methylphenacylbromide with sodium methacrylate in the presence of triethylbenzylammonium chloride. The monomer was identified with FTIR, ¹H and ¹³C‐NMR spectroscopies. Hydroxypropyl‐β‐cyclodextrin (HPCD) was used to form a water‐soluble host/guest inclusion complex (MPMA/HPCD) with the hydrophobic monomer. The complex was identified with FTIR and NMR techniques and polymerized in aqueous medium using potassium persulfate as initiator. During polymerization the resulting hydrophobic methacrylate polymer precipitated out with a majority of HPCD left in solution and a minority of HPCD bonded on the resulting polymer. The thus‐prepared polymer exhibited little difference from the counterparts obtained in organic solvent in number average molecular weight (M_n), polydispersity (M_w/M_n) and yield. The investigation provides a novel strategy for preparing hydrophobic ketoethyl methacrylate polymer in aqueous medium by using a monomer/HPCD inclusion complex. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of the Mg/Al Atomic Ratio of Ni‐Mg‐Al Catalysts for the Hydrodealkylation of 1,2,4‐Trimethylbenzene

The hydrodealkylation of 1,2,4‐trimethylbenzene (1,2,4‐TMB) to benzene, toluene and xylenes (BTX) was investigated on Ni‐Mg‐Al catalysts prepared by the coprecipitation method. The catalytic performances of these catalysts were considerably influenced by the Mg content of the catalyst. The catalysts were characterized via X‐ray diffraction, H₂‐temperature‐programmed reduction, NH₃‐temperature‐programmed desorption (TPD), CO₂‐TPD, and Fourier transform infrared spectroscopy. The results demonstrated that the appropriate amount of Mg species significantly affected the structural properties and caused the Ni nanoparticles to become highly dispersed. The higher activity of the catalysts might be ascribed to the homogenous distribution of the Ni nanoparticles, and the synergetic effects between Ni⁰, NiAl₂O₄ and MgAl₂O₄ were the key factor for obtaining the BTX.     

Synthesis and Characterization of 3,3′‐Bisazidomethyl Oxetane‐3‐Azidomethyl‐3′‐Methyl Oxetane Alternative Block Energetic Thermoplastic Elastomer

3,3′‐Bisazidomethyl oxetane‐3‐azidomethyl‐3′‐methyl oxetane (BAMO‐AMMO) tri‐block copolymer was successfully synthesized by azidation of a polymeric substrate containing bromo leaving groups, and an alternative block energetic thermoplastic elastomer (ETPE) was prepared by chain extension reaction. The tri‐block copolymer was characterized by Fourier transform infrared (FTIR), ¹H NMR, and ¹³C NMR spectroscopy, X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). It was found that the composition of the copolymer is nearly 1 : 1; crystallinity of the copolymer (71.81 %) is less than that of PBAMO (78.30 %). This is due to a partly mixture between soft and hard segments. Kinetic result shows that a crosslinking network is formed after the decomposition of azide group. Tensile strength of alternative block ETPE is 150 % of traditionally synthesized BAMO‐AMMO ETPE.