Efficient REBTA data reporting algorithm for object tracking in wireless sensor networks

Object tracking is widely referred as one of the most interesting applications of wireless sensor networks (WSNs). This application is able to detect and track objects and report information about these objects to a central base station. One of the major drawbacks in the current research in WSNs is the quality of the data reporting where the major research focus is dedicated to localization of objects; however, few of these works were concentrated on the data reporting. An efficient data reporting algorithm for object tracking in WSNs is proposed in this paper. The main objective of this paper is to enhance the WSN lifetime by achieving both minimum energy and balancing such consumption in sensor nodes during reporting operation. Furthermore, in our model, the enhancement of network reliability is considered. Finally, it reduces the effects of congestion by sufficiently utilizing the under loaded nodes to improve the network throughput. This paper formulates the object tracking problem in large‐scale WSN into 0/1 integer linear programming problem, and then proposes a reliable energy balance traffic aware approach to solve the optimization problem. From the obtained simulation results, the proposed solution has proved to be able to enhance the network performance in network lifetime, throughput, end‐to‐end delay, energy balance, and complexity for both homogeneous and heterogeneous networks.     

An approach for near-optimal distributed data fusion in wireless sensor networks

In wireless sensor networks (WSNs), a lot of sensory traffic with redundancy is produced due to massive node density and their diverse placement. This causes the decline of scarce network resources such as bandwidth and energy, thus decreasing the lifetime of sensor network. Recently, the mobile agent (MA) paradigm has been proposed as a solution to overcome these problems. The MA approach accounts for performing data processing and making data aggregation decisions at nodes rather than bring data back to a central processor (sink). Using this approach, redundant sensory data is eliminated. In this article, we consider the problem of calculating near-optimal routes for MAs that incrementally fuse the data as they visit the nodes in a WSN. The order of visited nodes (the agent’s itinerary) affects not only the quality but also the overall cost of data fusion. Our proposed heuristic algorithm adapts methods usually applied in network design problems in the specific requirements of sensor networks. It computes an approximate solution to the problem by suggesting an appropriate number of MAs that minimizes the overall data fusion cost and constructs near-optimal itineraries for each of them. The performance gain of our algorithm over alternative approaches both in terms of cost and task completion latency is demonstrated by a quantitative evaluation and also in simulated environments through a Java-based tool.     

Flower pollination algorithm‐based energy‐efficient stable clustering approach for WSNs

The advances in the size, cost of deployment, and user‐friendly interface of wireless sensor devices have given rise to many wireless sensor network (WSN) applications. WSNs need to use protocols for transmitting data samples from event regions to sink through minimum cost links. Clustering is a commonly used method of data aggregation in which nodes are organized into groups to reduce energy consumption. Nonetheless, cluster head (CH) has to bear an additional load in clustering protocols to organize different activities within the cluster. Proper CH selection and load balancing using efficient routing protocol is therefore a critical aspect for WSN's long‐term operation. In this paper, a threshold‐sensitive energy‐efficient cluster‐based routing protocol based on flower pollination algorithm (FPA) is proposed to extend the network's stability period. Using FPA, multihop communication between CHs and base station is used to achieve optimal link costs for load balancing distant CHs and energy minimization. Analysis and simulation results show that the proposed algorithm significantly outperforms competitive clustering algorithms in terms of energy consumption, stability period, and system lifetime.     

DUCR: Distributed unequal cluster‐based routing algorithm for heterogeneous wireless sensor networks

Designing energy efficient communication protocols for wireless sensor networks (WSNs) to conserve the sensors' energy is one of the prime concerns. Clustering in WSNs significantly reduces the energy consumption in which the nodes are organized in clusters, each having a cluster head (CH). The CHs collect data from their cluster members and transmit it to the base station via a single or multihop communication. The main issue in such mechanism is how to associate the nodes to CHs and how to route the data of CHs so that the overall load on CHs are balanced. Since the sensor nodes operate autonomously, the methods designed for WSNs should be of distributed nature, i.e., each node should run it using its local information only. Considering these issues, we propose a distributed multiobjective‐based clustering method to assign a sensor node to appropriate CH so that the load is balanced. We also propose an energy‐efficient routing algorithm to balance the relay load among the CHs. In case any CH dies, we propose a recovery strategy for its cluster members. All our proposed methods are completely distributed in nature. Simulation results demonstrate the efficiency of the proposed algorithm in terms of energy consumption and hence prolonging the network lifetime. We compare the performance of the proposed algorithm with some existing algorithms in terms of number of alive nodes, network lifetime, energy efficiency, and energy population.     

LSAPSP: Load distribution‐based slot allocation and path establishment using optimized substance particle selection in sensor networks

Sensor node energy conservation is the primary design parameters in wireless sensor networks (WSNs). Energy efficiency in sensor networks directly prolongs the network lifetime. In the process of route discovery, each node cooperates to forward the data to the base station using multi‐hop routing. But, the nodes nearer to the base station are loaded more than the other nodes that lead to network portioning, packet loss and delay as a result nodes may completely loss its energy during the routing process. To rectify these issues, path establishment considers optimized substance particle selection, load distribution, and an efficient slot allocation scheme for data transmission between the sensor nodes in this paper. The selection of forwarders and conscious multi‐hop path is selected based on the route cost value that is derived directly by taking energy, node degree and distance as crucial metrics. Load distribution based slot allocation method ensures the balance of data traffic and residual energy of the node in areal‐time environment. The proposed LSAPSP simulation results show that our algorithm not only can balance the real‐time environment load and increase the network lifetime but also meet the needs of packet loss and delay.     

FUCA: Fuzzy‐based unequal clustering algorithm to prolong the lifetime of wireless sensor networks

Wireless sensor network comprises billions of nodes that work collaboratively, gather data, and transmit to the sink. “Energy hole” or “hotspot” problem is a phenomenon in which nodes near to the sink die prematurely, which causes the network partition. This is because of the imbalance of the consumption of energy by the nodes in wireless sensor networks. This decreases the network's lifetime. Unequal clustering is a technique to cope up with this issue. In this paper, an algorithm, “fuzzy‐based unequal clustering algorithm,” is proposed to prolong the lifetime of the network. This protocol forms unequal clusters. This is to balance the energy consumption. Cluster head selection is done through fuzzy logic approach. Input variables are the distance to base station, residual energy, and density. Competition radius and rank are the two output fuzzy variables. Mamdani method is employed for fuzzy inference. The protocol is compared with well‐known algorithms, like low‐energy adaptive clustering hierarchy, energy‐aware unequal clustering fuzzy, multi‐objective fuzzy clustering algorithm, and fuzzy‐based unequal clustering under different network scenarios. In all the scenarios, the proposed protocol performs better. It extends the lifetime of the network as compared with its counterparts.     

Priority-based IEEE 802.15.4 CSMA/CA mechanism for WSNs

The IEEE 802.15.4 standard is widely used in wireless sensor networks (WSNs). In this paper, we propose a priority-based IEEE 802.15.4 carrier sense multiple access with collision avoidance (CSMA/CA) mechanism for WSNs. Considering traffic load and traffic type of sensor nodes, we classify sensor nodes into three types. In our mechanism, different contention parameters are set for nodes with different priority levels, in order that nodes with high priority achieve high probability to access the channel. By modeling the proposed mechanism using a Markov chain, we analyze and compute the successful transmission probability, throughput and energy consumption for nodes with different priority levels. Finally, our numerical results demonstrate that our mechanism performs well for WSNs.     

A comparison study on node clustering techniques used in target tracking WSNs for efficient data aggregation

Wireless sensor applications are susceptible to energy constraints. Most of the energy is consumed in communication between wireless nodes. Clustering and data aggregation are the two widely used strategies for reducing energy usage and increasing the lifetime of wireless sensor networks. In target tracking applications, large amount of redundant data is produced regularly. Hence, deployment of effective data aggregation schemes is vital to eliminate data redundancy. This work aims to conduct a comparative study of various research approaches that employ clustering techniques for efficiently aggregating data in target tracking applications as selection of an appropriate clustering algorithm may reflect positive results in the data aggregation process. In this paper, we have highlighted the gains of the existing schemes for node clustering‐based data aggregation along with a detailed discussion on their advantages and issues that may degrade the performance. Also, the boundary issues in each type of clustering technique have been analyzed. Simulation results reveal that the efficacy and validity of these clustering‐based data aggregation algorithms are limited to specific sensing situations only, while failing to exhibit adaptive behavior in various other environmental conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Prolonging lifetime for wireless rechargeable sensor networks through sleeping and charging scheduling

Prolonging network lifetime is a fundamental requirement in wireless sensor network (WSN). Existing charging scheduling algorithms suffer from high node redundancy and energy consumption issues. In this paper, we study WSN charging problem from the perspectives of energy conservation combined with energy replenishment scheduling. Firstly, we detect the redundant nodes whose energy is wasted in the network functionality and develop a K‐covering redundant nodes sleeping scheduling algorithm (KRSS) for reducing energy. Secondly, we employed multiple wireless charging vehicles (WCVs) for energy replenishment and optimize the charging scheduling algorithm to prevent any exhaustion of nodes, and we proposed a distance and energy–oriented charging scheduling algorithm (DECS) with multiple WCVs. Simulation experiments are conducted to show the advantages of the proposed KRSS+DECS, confirming that our scheme is capable of removing redundant nodes, lowering node failures, and prolonging network lifetime.     

Prolonging the lifetime of wireless sensor networks by utilizing feedback control

A new algorithm aiming to prolong the lifetime of wireless sensor networks (WSNs) is proposed to balance energy depletion. Using a feedback control combined with a discrete nonlinear programming method to adjust the transmission radii of sensor nodes located in different locations, makes network load redistribution possible and balances energy consumption, further prolongs the lifetime of the entire network. A data distribution model which specific to WSNs with sensor nodes that can adjust transmission radii is proposed to analyze the load spread of the network. This model contributes to predicting and analyzing energy consumption balance effectively. Compared with two other algorithms, dynamic transmission range adjustment and SP, respectively, the experimental results show that the proposed algorithm can lengthen the lifetime of WSNs by up to 22.7 and 27.2 %.     

Distributed fuzzy logic based energy‐aware and coverage preserving unequal clustering algorithm for wireless sensor networks

In an energy‐constrained wireless sensor networks (WSNs), clustering is found to be an effective strategy to minimize the energy depletion of sensor nodes. In clustered WSNs, network is partitioned into set of clusters, each having a coordinator called cluster head (CH), which collects data from its cluster members and forwards it to the base station (BS) via other CHs. Clustered WSNs often suffer from the hot spot problem where CHs closer to the BS die much early because of high energy consumption contributed by the data forwarding load. Such death of nodes results coverage holes in the network very early. In most applications of WSNs, coverage preservation of the target area is a primary measure of quality of service. Considering the energy limitation of sensors, most of the clustering algorithms designed for WSNs focus on energy efficiency while ignoring the coverage requirement. In this paper, we propose a distributed clustering algorithm that uses fuzzy logic to establish a trade‐off between the energy efficiency and coverage requirement. This algorithm considers both energy and coverage parameters during cluster formation to maximize the coverage preservation of target area. Further, to deal with hot spot problem, it forms unequal sized clusters such that more CHs are available closer to BS to share the high data forwarding load. The performance of the proposed clustering algorithm is compared with some of the well‐known existing algorithms under different network scenarios. The simulation results validate the superiority of our algorithm in network lifetime, coverage preservation, and energy efficiency.     

Energy efficient clustering algorithms for wireless sensor networks: novel chemical reaction optimization approach

Clustering has been accepted as one of the most efficient techniques for conserving energy of wireless sensor networks (WSNs). However, in a two-tiered cluster based WSN, cluster heads (CHs) consume more energy due to extra overload for receiving data from their member sensor nodes, aggregating them and transmitting that data to the base station (BS). Therefore, proper selection of CHs and optimal formation of clusters play a crucial role to conserve the energy of sensor nodes for prolonging the lifetime of WSNs. In this paper, we propose an energy efficient CH selection and energy balanced cluster formation algorithms, which are based on novel chemical reaction optimization technique (nCRO), we jointly called these algorithms as novel CRO based energy efficient clustering algorithms (nCRO-ECA). These algorithms are developed with efficient schemes of molecular structure encoding and potential energy functions. For the energy efficiency, we consider various parameters such as intra-cluster distance, sink distance and residual energy of sensor nodes in the CH selection phase. In the cluster formation phase, we consider various distance and energy parameters. The algorithm is tested extensively on various scenarios of WSNs by varying number of sensor nodes and CHs. The results are compared with original CRO based algorithm, namely CRO-ECA and some existing algorithms to demonstrate the superiority of the proposed algorithm in terms of energy consumption, network lifetime, packets received by the BS and convergence rate.     

A grid based clustering and routing algorithm for solving hot spot problem in wireless sensor networks

Energy conservation of the sensor nodes is the most important issue that has been studied extensively in the design of wireless sensor networks (WSNs). In many applications, the nodes closer to the sink are overburdened with huge traffic load as the data from the entire region are forwarded through them to reach the sink. As a result, their energy gets exhausted quickly and the network is partitioned. This is commonly known as hot spot problem. Moreover, sensor nodes are prone to failure due to several factors such as environmental hazards, battery exhaustion, hardware damage and so on. However, failure of cluster heads (CHs) in a two tire WSN is more perilous. Therefore, apart from energy efficiency, any clustering or routing algorithm has to cope with fault tolerance of CHs. In this paper, we address the hot spot problem and propose grid based clustering and routing algorithms, combinedly called GFTCRA (grid based fault tolerant clustering and routing algorithms) which takes care the failure of the CHs. The algorithms follow distributed approach. We also present a distributed run time management for all member sensor nodes of any cluster in case of failure of their CHs. The routing algorithm is also shown to tolerate the sudden failure of the CHs. The algorithms are tested through simulation with various scenarios of WSN and the simulation results show that the proposed method performs better than two other grid based algorithms in terms of network lifetime, energy consumption and number of dead sensor nodes.     

A Simple Algorithm for Data Compression in Wireless Sensor Networks

Power saving is a critical issue in wireless sensor networks (WSNs) since sensor nodes are powered by batteries which cannot be generally changed or recharged. As radio communication is often the main cause of energy consumption, extension of sensor node lifetime is generally achieved by reducing transmissions/receptions of data, for instance through data compression. Exploiting the natural correlation that exists in data typically collected by WSNs and the principles of entropy compression, in this Letter we propose a simple and efficient data compression algorithm particularly suited to be used on available commercial nodes of a WSN, where energy, memory and computational resources are very limited. Some experimental results and comparisons with, to the best of our knowledge, the only lossless compression algorithm previously proposed in the literature to be embedded in sensor nodes and with two well- known compression algorithms are shown and discussed.     

Energy‐efficient and localized lossy data aggregation in asynchronous sensor networks

In wireless sensor networks, most data aggregation scheduling methods let all nodes aggregate data in every time instance. It is not energy efficient and practical because of link unreliability and data redundancy. This paper proposes a lossy data aggregation (LDA) scheme to reduce traffic and save energy. LDA selects partial child nodes to sample data at partial time slots and allows estimated aggregation at parent nodes or a root in a network. We firstly consider that all nodes sample data synchronously and find that the error between the real value of a physical parameter and that measured by LDA is bounded respectively with and without link unreliability. Detailed analysis is given on error bound when a confidence level is previously assigned to the root by a newly designed algorithm. Thus, each parent can determine the minimum number of child nodes needed to achieve its assigned confidence level. We then analyze a probability to bound the error with a confidence level previously assigned to the root when all nodes sample data asynchronously. An algorithm then is designed to implement our data aggregation under asynchronization. Finally, we implement our experiment on the basis of real test‐beds to prove that the scheme can save more energy than an existing algorithm for node selection, Distributive Online Greedy (DOG). Copyright © 2012 John Wiley & Sons, Ltd.     

An energy‐efficient utility‐based distributed data routing scheme for heterogenous sensor networks

A utility‐based distributed data routing algorithm is proposed and evaluated for heterogeneous wireless sensor networks. It is energy efficient and is based on a game‐theoretic heuristic load‐balancing approach. It runs on a hierarchical graph arranged as a tree with parents and children. Sensor nodes are considered heterogeneous in terms of their generated traffic, residual energy and data transmission rate and the bandwidth they provide to their children for communication. The proposed method generates a data routing tree in which child nodes are joined to parent nodes in an energy‐efficient way. The principles of the Stackelberg game, in which parents as leaders and children as followers, are used to support the distributive nature of sensor networks. In this context, parents behave cooperatively and help other parents to adjust their loads, while children act selfishly. Simulation results indicate the proposed method can produce on average more load‐balanced trees, resulting in over 30% longer network lifetime compared with the cumulative algorithm proposed in the literature. Copyright © 2014 John Wiley & Sons, Ltd.     

An Energy-Efficient Routing Algorithm Based on Relative Identification and Direction for Wireless Sensor Networks

In studies of wireless sensor networks (WSNs), routing protocols in network layer is an important topic. To date, many routing algorithms of WSNs have been developed such as relative direction-based sensor routing (RDSR). The WSNs in such algorithm are divided into many sectors for routing. RDSR could simply reduce the number of routes as compared to the convention routing algorithm, but it has routing loop problem. In this paper, a less complex, more efficient routing algorithm named as relative identification and direction-based sensor routing (RIDSR) algorithm is proposed. RIDSR makes sensor nodes establish more reliable and energy-efficient routing path for data transmission. This algorithm not only solves the routing loop problem within the RDSR algorithm but also facilitates the direct selection of a shorter distance for routing by the sensor node. Furthermore, it saves energy and extends the lifetime of the sensor nodes. We also propose a new energy-efficient algorithm named as enhanced relative identification and direction-based sensor routing (ERIDSR) algorithm. ERISDR combines triangle routing algorithm with RIDSR. Triangle routing algorithm exploits a simple triangle rule to determine a sensor node that can save more energy while relaying data between the transmitter and the receiver. This algorithm could effectively economize the use of energy in near-sensor nodes to further extend the lifetime of the sensor nodes. Simulation results show that ERIDSR get better performance than RDSR, and RIDSR algorithms. In addition, ERIDSR algorithm could save the total energy in near-sensor nodes more effectively.     

基于遗传聚类的无线传感器负载均衡路由算法

通常的无线传感器分簇网络存在节点负载不均衡的问题。为均衡各节点能量消耗,延长网络生存周期,将K均值算法与遗传算法相结合,提出一种负载均衡的无线传感器网络路由算法,算法利用遗传算法的全局寻优能力以克服传统K均值算法的局部性和对初始中心的敏感性,实现了传感器网络节点自适应成簇与各节点负载均衡。仿真实验表明,该算法显著延长了网络寿命,相对于其他分簇路由算法,其网络生存时间延长了约43%。     

A particle swarm optimization based energy efficient cluster head selection algorithm for wireless sensor networks

Clustering has been proven to be one of the most efficient techniques for saving energy of wireless sensor networks (WSNs). However, in a hierarchical cluster based WSN, cluster heads (CHs) consume more energy due to extra overload for receiving and aggregating the data from their member sensor nodes and transmitting the aggregated data to the base station. Therefore, the proper selection of CHs plays vital role to conserve the energy of sensor nodes for prolonging the lifetime of WSNs. In this paper, we propose an energy efficient cluster head selection algorithm which is based on particle swarm optimization (PSO) called PSO-ECHS. The algorithm is developed with an efficient scheme of particle encoding and fitness function. For the energy efficiency of the proposed PSO approach, we consider various parameters such as intra-cluster distance, sink distance and residual energy of sensor nodes. We also present cluster formation in which non-cluster head sensor nodes join their CHs based on derived weight function. The algorithm is tested extensively on various scenarios of WSNs, varying number of sensor nodes and the CHs. The results are compared with some existing algorithms to demonstrate the superiority of the proposed algorithm.