Wide Bandgap Polymer with Narrow Photon Harvesting in Visible Light Range Enables Efficient Semitransparent Organic Photovoltaics

Wide bandgap polymer D18 with narrow photon harvesting in visible light range and small molecule N3 with near-infrared photon harvesting are adopted for building semitransparent organic photovoltaics (OPVs). To find out the optimal D18:N3 weight ratio for semitransparent OPVs, series of opaque OPVs are built with a varied D18:N3 weight ratio. The power conversion efficiency (PCE) and fill factor can be maintained over 16% and 77% in the D18:N3 (0.7:1.6, wt/wt) based opaque OPVs, respectively. The average visible transmittance (AVT) of the corresponding blend films can be achieved over 50%, demonstrating the great potential in fabricating efficient semitransparent OPVs. The semitransparent OPVs based on D18:N3 (0.7:1.6, wt/wt) are fabricated by using 1 nm Au/(10, 15, 20 nm) Ag as cathode. The thickness of Ag layers is varied to balance the optical properties and electrical properties of semitransparent top electrode. The semitransparent OPVs with 10 nm Ag achieve the highest light utilization efficiency of 2.90% with a PCE of 12.91% and an AVT of 22.49%, which should be among the best performance of reported semitransparent OPVs. This work demonstrates that the wide bandgap polymer donor with narrow photon harvesting in visible light range has great potential in preparing efficient semitransparent OPVs.     

Alumina Nanoparticle Interfacial Buffer Layer for Low-Bandgap Lead-Tin Perovskite Solar Cells

Mixed lead-tin (Pb:Sn) halide perovskites are promising absorbers with narrow-bandgaps (1.25–1.4 eV) suitable for high-efficiency all-perovskite tandem solar cells. However, solution processing of optimally thick Pb:Sn perovskite films is notoriously difficult in comparison with their neat-Pb counterparts. This is partly due to the rapid crystallization of Sn-based perovskites, resulting in films that have a high degree of roughness. Rougher films are harder to coat conformally with subsequent layers using solution-based processing techniques leading to contact between the absorber and the top metal electrode in completed devices, resulting in a loss of V_OC, fill factor, efficiency, and stability. Herein, this study employs a non-continuous layer of alumina nanoparticles distributed on the surface of rough Pb:Sn perovskite films. Using this approach, the conformality of the subsequent electron-transport layer, which is only tens of nanometres in thickness is improved. The overall maximum-power-point-tracked efficiency improves by 65% and the steady-state V_OC improves by 28%. Application of the alumina nanoparticles as an interfacial buffer layer also results in highly reproducible Pb:Sn solar cell devices while simultaneously improving device stability at 65 °C under full spectrum simulated solar irradiance. Aged devices show a six-fold improvement in stability over pristine Pb:Sn devices, increasing their lifetime to 120 h.     

Efficient Cesium Lead Halide Perovskite Solar Cells through Alternative Thousand‐Layer Rapid Deposition

The novel growth of cesium lead halide perovskite thin films, which are prepared through thousand‐layer rapid alternative deposition, is performed by developing an active perovskite film consisting of a layer‐by‐layer structure. This method is considerably more difficult to be implemented from the solution process. The obtained thin film morphology and characteristics are distinguished from that of the traditional a few layers and two‐material codeposition. These alternative deposited perovskites are integrated with vacuum‐deposited carrier‐transporting layers and electrodes, and all vacuum‐sublimed perovskite solar cells exhibit an outstanding power conversion efficiency of 13.0%. The use of these devices for environmental light energy harvesting provides a power conversion efficiency of 33.9% under fluorescent light illumination of 1000 lux.     

Scalable,Template Driven Formation of Highly Crystalline Lead-Tin Halide Perovskite Films

Low bandgap lead-tin halide perovskites are predicted to be candidates to maximize the performance of single junction and tandem solar cells based on metal halide perovskites. In spite of the tremendous progress in lab-scale device efficiency, devices fabricated with scalable techniques fail to reach the same efficiencies, which hinder their potential industrialization. Herein, a method is proposed that involves a template of a 2D perovskite deposited with a scalable technique (blade coating), which is then converted in situ to form a highly crystalline 3D lead-tin perovskite. These templated grown films are alloyed with stoichiometric ratio and are highly oriented with the (l00) planes aligning parallel to the substrate. The low surface/volume ratio of the obtained single-crystal-like films contributes to their enhanced stability in different environments. Finally, the converted films are demonstrated as active layer for solar cells, opening up the opportunity to develop this scalable technique for the growth of highly crystalline hybrid halide perovskites for photovoltaic devices.     

2D/3D Heterostructure for Semitransparent Perovskite Solar Cells with Engineered Bandgap Enables Efficiencies Exceeding 25% in Four‐Terminal Tandems with Silicon and CIGS

Wide‐bandgap perovskite solar cells (PSCs) with optimal bandgap (E_g) and high power conversion efficiency (PCE) are key to high‐performance perovskite‐based tandem photovoltaics. A 2D/3D perovskite heterostructure passivation is employed for double‐cation wide‐bandgap PSCs with engineered bandgap (1.65 eV ≤ E_g ≤ 1.85 eV), which results in improved stabilized PCEs and a strong enhancement in open‐circuit voltages of around 45 mV compared to reference devices for all investigated bandgaps. Making use of this strategy, semitransparent PSCs with engineered bandgap are developed, which show stabilized PCEs of up to 25.7% and 25.0% in four‐terminal perovskite/c‐Si and perovskite/CIGS tandem solar cells, respectively. Moreover, comparable tandem PCEs are observed for a broad range of perovskite bandgaps. For the first time, the robustness of the four‐terminal tandem configuration with respect to variations in the perovskite bandgap for two state‐of‐the‐art bottom solar cells is experimentally validated.     

Highly Efficient and Stable Wide-Bandgap Perovskite Solar Cells via Strain Management

Wide-bandgap (WBG) perovskite solar cells (PSCs) with high performance and stability are in considerable demand to boost tandem solar cell efficiencies. Perovskite bandgap broadening results in a high barrier for enhancing the efficiency of PSCs and phase segregation in perovskite. In this study, it is shown that the residual strain is the key factor affecting the WBG perovskite device efficiency and stability. The dimethyl sulfoxide addition helps lead halide with opening the layer spacing to form intermediate phases that provide more nucleation sites to eliminate lattice mismatch with organic components, which dominates the strain effects on the WBG perovskite growth in a sequential deposition. By minimizing the strain, 1.67 and 1.77 eV nip devices with record efficiencies of 22.28% and 20.45%, respectively, can be achieved. The greatly suppressed phase segregation enables the devices with retained 90–95% of initial efficiency over 4000 h of damp stability and 80–90% of initial efficiency over 700 h of maximum-power-point (MPP) stability. Besides, the 1.67 eV pin devices can achieve a competitive 22.3% efficiency with considerable damp-heat, pre-ultraviolet (pre-UV) aging and MPP tracking stability according to IEC 61215. The final efficiency of more than 28.3% for the perovskite/Si tandem is obtained.     

Domain Controlling by Compound Additive toward Highly Efficient Quasi-2D Perovskite Light-Emitting Diodes

Quasi-2D perovskites with enlarged exciton binding energy and tunable bandgap are appealing for application in perovskite light-emitting diodes (PeLEDs). However, wide n domains distribution is commonly formed in solution-processed quasi-2D perovskite films due to the uncontrollable crystallization behavior, which leads to low device performance. Here, the crystallization process is successfully regulated to narrow the n domains distribution by introducing compound additive of ZrO₂ nanoparticles (NPs) and Cryptand complexant. ZrO₂ NPs can avoid the segregation of organic large and small cations by strengthening the solvent extraction capacity of antisolvent, while Cryptand offsets the poor solubility of PbBr₂ by forming an intermediate state to slow down the crystallization of high-n domains. Consequently, both high photoluminescence quantum yields over 90% and a high external quantum efficiency of 21.2% are obtained in the optimized green quasi-2D PeLEDs. Moreover, the lifetime extends about four times compared with control devices. The strategy of domain controlling by compound additive provides a powerful way to develop high-performance quasi-2D perovskite optoelectrical devices.     

Ultrathin perovskite based solar cells with the efficiency enhanced by charge transfer process

We report a new approach of improving the solar cells efficiency based on ultrathin perovskite films. We propose the addition of CuPc compound to perovskite active layer for enhanced charge generation and transfer process by charge transfer process between CuPc and perovskite. The performance of the devices with and without addition of CuPc was studied in respect to thickness of the active layer. The thickness was varied by the change of the spin coating speed in the range of 4000, 7000 and 10000 rpm, different concentration of CuPc also been studied. The process of charge carrier recombination, crystallinity and Raman characteristics of the obtained films was studied. The perovskite device with an active layer of MAPbI₃ mixed with CuPc spin coated with the speed of 10000 rpm with thickness of about 150 nm demonstrated the efficiency of 12.7%. The ultrathin mixed perovskite film (10000 rpm perovskite film of 15% CuPc) based device presents 33% thickness and 85% efficiency of common pure perovskite device (4000 rpm pure perovskite film).     

Rapid 2D Patterning of High-Performance Perovskites Using Large Area Flexography

Solution processing of metal halide perovskites offers the potential for efficient, high-speed roll-based manufacturing of emerging optoelectronic devices such as lightweight photovoltaics and light emitting diodes at lower cost than achievable with incumbent technologies (e.g., Silicon). However, current perovskite fabrication methods are limited in their speed, uniformity, and patterning resolution, relying on subtractive postdeposition scribing for integration of modules and device arrays. Here, a method for flexographic printing of MA_0.6FA_0.4PbI₃ at 60 m min⁻¹, the fastest reported perovskite absorber deposition and the first report of inline drying integrated with roll-based printing, is presented. This process delivers high-resolution patterning (< 3 µm line edge roughness) and precise thickness control through rheological design of precursor inks, allowing scalably printed 50 µm features over large areas (140 cm²), while obviating damaging scribing steps. 2D scanning photoluminescence (PL) is applied to resolve correlations between ink leveling dynamics and optoelectronic quality. Integrating these highly uniform printed perovskite absorbers into n-i-p planar perovskite solar cells, photovoltaic conversion efficiency up to 20.4% (0.134 cm²), the highest performance yet reported for any roll-printed perovskite cells is achieved. This study, thus, establishes flexography as a scalable approach to deposit precisely-patterned high-quality perovskites extensible to applications in emitter and detector arrays.     

Sequential Deposition of High‐Quality Photovoltaic Perovskite Layers via Scalable Printing Methods

Sequential deposition is demonstrated as an effective technology for preparation of high‐performance perovskite solar cells based on lab‐scale spin coating. However, devices fabricated by scalable methods are lagging far behind their state‐of‐the‐art spin‐coated counterparts, largely due to the difficulty in obtaining high‐quality thin films of perovskites crystallized from printed precursors. Here, a generic strategy that allows sequential deposition of dense and uniform perovskite films via two‐step blade coating is reported. The rational selection of solvent combined with a mild vacuum extraction process enables us to produce uniform lead iodide (PbI₂) films over large areas. Significantly, the resulting PbI₂ films possess a mesoporous structure that is highly beneficial for the insertion reaction with methylammonium iodide (MAI). It is further identified that the deposition temperature of MAI plays an important role in determining the morphology and crystallinity of the perovskite films. Solar cells using these sequentially bladed perovskite layers yield efficiencies over 16% with high fill factors up to 78%. These results represent important progress toward the large‐scale deposition of perovskite thin films for practical applications.     

Oriented Crystallization of Mixed‐Cation Tin Halides for Highly Efficient and Stable Lead‐Free Perovskite Solar Cells

As the most promising lead‐free branch, tin halide perovskites suffer from the severe oxidation from Sn²⁺ to Sn⁴⁺, which results in the unsatisfactory conversion efficiency far from what they deserve. In this work, by facile incorporation of methylammonium bromide in composition engineering, formamidinium and methylammonium mixed cations tin halide perovskite films with ultrahighly oriented crystallization are synthesized with the preferential facet of (001), and that oxidation is suppressed with obviously declined trap density. MA⁺ ions are responsible for that impressive orientation while Br^‐ ions account for their bandgap modulation. Depending on high quality of the optimal MA_0.25FA_0.75SnI_2.75Br_0.25 perovskite films, their device conversion efficiency surges to 9.31% in contrast to 5.02% of the control formamidinium tin triiodide perovskite (FASnI₃) device, along with almost eliminated hysteresis. That also results in the outstanding device stability, maintaining above 80% of the initial efficiency after 300 h of light soaking while the control FASnI₃ device fails within 120 h. This paper definitely paves a facile and effective way to develop high‐efficiency tin halide perovskites solar cells, optoelectronic devices, and beyond.     

Passivation Properties and Formation Mechanism of Amorphous Halide Perovskite Thin Films

Lead halide perovskites are among the most exciting classes of optoelectronic materials due to their unique ability to form high-quality crystals with tunable bandgaps in the visible and near-infrared using simple solution precipitation reactions. This facile crystallization is driven by their ionic nature; just as with other salts, it is challenging to form amorphous halide perovskites, particularly in thin-film form where they can most easily be studied. Here, rapid desolvation promoted by the addition of acetate precursors is shown as a general method for making amorphous lead halide perovskite films with a wide variety of compositions, including those using common organic cations (methylammonium and formamidinium) and anions (bromide and iodide). By controlling the amount of acetate, it is possible to tune from fully crystalline to fully amorphous films, with an interesting intermediate state consisting of crystalline islands embedded in an amorphous matrix. The amorphous lead halide perovskite has a large and tunable optical bandgap. It improves the photoluminescence quantum yield and lifetime of incorporated crystalline perovskite, opening up the intriguing possibility of using amorphous perovskite as a passivating contact, as is currently done in record efficiency silicon solar cells.     

2D-Layered Manganese Perovskite with High Mobility

2D perovskite is an organic–inorganic hybrid material with good photoelectric properties, generally prepared by using organic groups as isolation molecules. In this study, using manganese chloride and potassium halide as raw materials, all-inorganic 2D lead-free perovskites are prepared by the Bridgeman melting and cooling method. Different from the 2D perovskites synthesized by organic spacer molecules, the prepared all-inorganic 2D perovskites have smaller layer spacings and good crystallization performance due to the use of potassium halide as spacer molecules. They are direct bandgap semiconductors and their energy bandgaps are tuned by the different types of potassium halides. High degree orientation crystal thin films with (001) lattice plane parallel to silicon wafer substrate are prepared by double-source evaporation. The physical morphology of the films is characterized by grazing angle X-ray diffraction, transmission electron microscopy, and electron diffraction. The field effect transistors prepared from these 2D films show excellent electronic characteristics. The mobility of the optimized device is ≈24 cm² v⁻¹ s⁻¹ and the on/off ratio reaches 10⁵. This study reveals the potential of lead-free manganese 2D perovskite as a high-performance perovskite field effect transistor.     

Suppressing Ion Migration across Perovskite Grain Boundaries by Polymer Additives

Passivation of organometal halide perovskites with polar molecules has been recently demonstrated to improve the photovoltaic device efficiency and stability. However, the mechanism is still elusive. Here, it is found that both polymers with large and small dipole moment of 3.7 D and 0.6 D have negligible defect passivation effect on the MAPbI₃ perovskite films as evidenced by photothermal deflection spectroscopy. The photovoltaic devices with and without the polymer additives also have comparable power conversion efficiencies around 19%. However, devices with the additives have noticeable improvement in stability under continuous light irradiation. It is found that although the initial mobile ion concentrations are comparable in both devices with and without the additives, the additives can strongly suppress the ion migration during the device operation. This contributes to the significantly enhanced electrical-field stress tolerance of the perovskite solar cells (PVSCs). The PVSCs with polymer additives can operate up to −2 V reverse voltage bias which is much larger than the breakdown voltage of −0.5 V that has been commonly observed. This study provides insight into the role of additives in perovskites and the corresponding device degradation mechanism.     

Double-Side Crystallization Tuning to Achieve over 1 µm Thick and Well-Aligned Block-Like Narrow-Bandgap Perovskites for High-Efficiency Near-Infrared Photodetectors

Solution-processed narrow-bandgap Sn–Pb perovskites have shown their potential in near-infrared (NIR) photodetection as a promising alternative to traditional silicon and inorganic compounds. To achieve efficient NIR photodetection, high-quality Sn–Pb perovskite thick films with well-packed, smooth, and pinhole/void-free features are highly desirable for boosting the spectral absorption. Understanding the crystallization kinetics and tuning the crystallization are fundamentally important to reach such high-quality thick Sn–Pb perovskite films, and have been limitedly explored. Herein, an approach of double-side crystallization tuning through low-temperature space-restricted annealing in methylammonium-free Sn–Pb perovskite films with over 1 µm thickness is proposed. More specifically, through simultaneously retarding the crystallization in the top of precursor films and promoting the crystal growth of the bottom of precursor films, high-quality and block-like thick FA_0.85Cs_0.15Sn_0.5Pb_0.5I₃ perovskite films with improved crystallinity, preferred out-of-plane orientation, and reduced trap density are achieved. Finally, photovoltaic-mode Sn–Pb perovskite NIR photodetectors show a high external quantum efficiency of ≈80% at 760–900 nm, a recorded responsivity of 0.53 A W⁻¹, and a high specific detectivity of 6 × 10¹² Jones at 940 nm. This study offers the fundamental understanding of the crystallization kinetics of thick perovskite films and paves the way for perovskite-based emerging NIR photodetection and imaging applications.     

Suppressing the Photoinduced Halide Segregation in Wide-Bandgap Perovskite Solar Cells by Strain Relaxation

Efficient and stable wide bandgap (WBG) perovskite solar cells (PSCs) are imperative for fabricating superior tandem devices. However, small crystal grains and light-induced phase segregation of WBG perovskite result in large open-circuit voltage (V_OC) deficits, critically impeding the development of the related devices. Herein, the effective functional groups of Lewis-base trans-Ferulic acid (t-FA) are employed to release the residual microstrain in the perovskite lattice. Larger perovskite crystals are formed by strengthening the interaction between the perovskite solute and solution. The lattice structure is stabilized to suppress light-induced halide segregation. Finally, the power conversion efficiency (PCE) of the optimized device with a bandgap of ≈1.77 eV is increased from 17.33% to 19.31% with the enhancement of V_OC. Moreover, replacing a mixture of MeO-2PACZ and Me-4PACZ as the hole transporting layer (HTL), the PCE further lifts to 19.9% and V_OC is 1.32 V, one of the highest performances reported for WBG PSCs, especially for devices prepared entirely by solution spin-coating. Therefore, this study provides a practicable alternative for realizing efficient WBG PSCs, which can contribute to the growth of perovskite-based tandem devices.     

δ‐CsPbI3 Intermediate Phase Growth Assisted Sequential Deposition Boosts Stable and High‐Efficiency Triple Cation Perovskite Solar Cells

Cs/FA/MA triple cation perovskite films have been well developed in the antisolvent dripping method, attributable to its outstanding photovoltaic and stability performances. However, a facile and effective strategy is still lacking for fabricating high‐quality large‐grain triple cation perovskite films via sequential deposition method a, which is one of the key technologies for high efficiency perovskite solar cells. To address this issue, a δ‐CsPbI₃ intermediate phase growth (CsPbI₃‐IPG) assisted sequential deposition method is demonstrated for the first time. The approach not only achieves incorporation of controllable cesium into (FAPbI₃)_1–x(MAPbBr₃)_x perovskite, but also enlarges the perovskite grains, manipulates the crystallization, modulates the bandgap, and improves the stability of final perovskite films. The photovoltaic performances of the devices based on these Cs/FA/MA perovskite films with various amounts of the δ‐CsPbI₃ intermediate phase are investigated systematically. Benefiting from moderate cesium incorporation and intermediate phase‐assisted grain growth, the optimized Cs/FA/MA perovskite solar cells exhibit a significantly improved power conversion efficiency and operational stability of unencapsulated devices. This facile strategy provides new insights into the compositional engineering of triple or quadruple cation perovskite materials with enlarged grains and superior stability via a sequential deposition method.     

Phase Aggregation Suppression of Homogeneous Perovskites Processed in Ambient Condition toward Efficient Light-Emitting Diodes

Perovskite light-emitting diodes (PeLEDs) have attracted attention because of their high efficiencies. However, due to the sensitivity of perovskites to ambient condition, perovskite emitter layers are generally fabricated under an inert gas environment (e.g., dry N₂), which increases processing complexity and cost. Here, air-prepared quasi-2D perovskites are reported for efficient PeLEDs. It is found that the phase aggregation is the major obstacle deteriorating the characteristics of air-prepared perovskites. Through antisolvent engineering to modulate the nucleation and growth characteristics of perovskite films from precursor solution, phase aggregations are restrained. Confocal laser scanning fluorescence microscopy results demonstrate homogeneous perovskite films with uniform photoluminescence distributions. Traps at grain boundaries are passivated, and exciton transfer among perovskite phases becomes effective. Finally, efficient green PeLEDs based on air-prepared perovskites are realized with an external quantum efficiency of 15.4%. This work provides a promising strategy to fabricate cost-effective perovskite devices in ambient air condition.     

Combined Bulk and Surface Passivation in Dimensionally Engineered 2D-3D Perovskite Films via Chlorine Diffusion

Dimensional engineering of perovskite films is a promising pathway to improve the efficiency and stability of perovskite solar cells (PSCs). In this context, surface or bulk passivation of defects in 3D perovskite film by careful introduction of 2D perovskite plays a key role. Here the authors demonstrate a 2D perovskite passivation scheme based on octylammonium chloride, and show that it provides both bulk and surface passivation of 1.6 eV bandgap 3D perovskite film for highly efficient (≈23.62%) PSCs with open-circuit voltages up to 1.24 V. Surface and depth-resolved microscopy and spectroscopy analysis reveal that the Cl⁻ anion diffuses into the perovskite bulk, passivating defects, while the octylammonium ligands provide effective, localized surface passivation. The authors find that the Cl⁻ diffusion into the perovskite lattice is independent of the 2D perovskite crystallization process and occurs rapidly during deposition of the 2D precursor solution. The annealing-induced evaporation of Cl from bulk perovskite is also inhibited in 2D–3D perovskite film as compared to pristine 3D perovskite, ensuring effective bulk passivation in the relevant film.     

Expanded Phase Distribution in Low Average Layer-Number 2D Perovskite Films: Toward Efficient Semitransparent Solar Cells

The application of low average layer-number (〈n〉 ≤ 2) 2D perovskites in semitransparent photovoltaics (ST-PVs) has been hindered by their strong exciton binding energy and high electrical anisotropy. Here, the phase distribution is expanded fully and orderly to enable efficient charge transport in 2D (NMA)₂(MA)Pb₂I₇ (NMA: 1-naphthylmethylammonium, MA: CH₃NH₃⁺) perovskite films by regulating the sedimentation dynamics of organic cation-based colloids. Ammonium chloride is synergistically introduced to enhance the phase separation further and construct a favorable out-of-plane orientation. The wide and graded phase distribution well aligns the energy level to facilitate charge transfer. As a result, the first application of an average 〈n〉 = 2 2D perovskite is implemented in ST-PVs with visible power conversion efficiency (PCE) of 7.52% and high average visible transmittance (AVT) of 40.5%. This study offers a new candidate and an effective strategy for efficient and stable ST-PVs and is relevant to other perovskite optoelectronic devices.