Synthesis and characterization of poly(amino urea urethane)-based block copolymer and its potential application as injectable pH/temperature-sensitive hydrogel for protein carrier

A series of novel block copolymer comprising of poly(ethylene glycol) (PEG) and poly(amino urea urethane) (PAUU) was simply synthesized and characterized. The block copolymers were synthesized by a polyaddition reaction between isocyanate groups of 1,6-diisocyanato hexamethylene with secondary amine and hydroxyl groups of 2-hydroxyethyl piperazine and hydroxyl groups at the ends of PEG in chloroform in the presence of dibutyltin dilaurate as a catalyst and characterized by ¹H and ¹³C NMR, FTIR and gel permeation chromatography. Copolymer aqueous solutions exhibited pH/temperature-dependent sol–gel phase transitions with a sol-to-gel and a gel-to-sol phase transition corresponding to the increasing of pH and temperature, respectively, with low concentrations. The gel regions covered the physiological condition and could be modulated by changing PAUU fraction, molecular weight of PEG and copolymer concentration. The copolymer hydrogel did not show cytotoxicity. After injecting the copolymer solution subcutaneously into SD rats, an in situ gel formed rapidly. The copolymer hydrogel was confirmed as a protein depot carrier; it showed a sustained release of FITC-BSA over 6 weeks. This novel pH/temperature-sensitive hydrogel system is a potential applicable candidate for protein carrier.     

Tunable Engineering of Heparinized Injectable Hydrogels for Affinity‐Based Sustained Delivery of Bioactive Factors

Here, the design of an in situ‐forming injectable hydrogel is reported based on pH‐ and temperature‐responsive copolymers finely engineered with heparin for the sustained delivery of bioactive factors. In order to develop such heparinized injectable hydrogels, pH‐ and temperature‐responsive copolymers based on poly(ethylene glycol) and poly(urethane sulfamethazine) (PEG‐PUSSM) are synthesized and acrylated, and subsequently coupled with thiolated heparin through Michael‐addition reaction. The content of heparin in the bioconjugates (Hep‐PUSSM) is finely tuned to control the release of heparin‐binding bioactive factors. The free‐flowing bioconjugate sols at room temperature transform to stable viscoelastic gel in physiological conditions, indicating that heparin modification does not affect the sol–gel transition. The subcutaneous administration of bioconjugate sols to the dorsal‐region of Sprague‐Dawley rats forms a hydrogel depot and shows controlled degradation. The bioconjugates effectively bind with bioactive factors (VEGF) through simple mixing, and the release is controlled over a period of 4 weeks without an initial burst. As a result, the implantation of VEGF‐loaded bioconjugate gel induces angiogenesis throughout the hydrogel network. The tunable engineering of the injectable hydrogel by heparinization with independent controllable physical properties sustains the release of bioactive factors, indicating that it may be a promising platform for the delivery of bioactive factors.     

Synthesis and characterization of star-shaped block copolymer of poly-(?-caprolactone) and poly(ethyl ethylene phosphate) as drug carrier

A series of novel 4-arm biodegradable star block copolymers of poly(?-caprolactone) and poly(ethyl ethylene phosphate) were synthesized via ring-opening polymerization of 2-ethoxy-2-oxo-1,3,2-dioxaphospholane using hydroxyl terminated 4-arm star-shaped poly(?-caprolactone) and stannous octoate co-initiation system. Gel permeation chromatography (GPC), NMR and FT-IR were used to demonstrate the structure and analyze their compositions. The self-assembly behavior of these star-shaped copolymers in aqueous solution was studied by ¹H NMR and fluorescence technique, and the results indicated those copolymers formed nanoparticles in aqueous solution with hydrophobic poly(?-caprolactone) core and hydrophilic poly(ethyl ethylene phosphate) shell. The critical micelle concentration was relative to the length of poly(?-caprolactone) and poly(ethyl ethylene phosphate) block. Paclitaxel was encapsulated in the micelles and the release behavior demonstrated that a longer hydrophobic block resulted in slightly slower release rate from the micelles. These copolymer micelles were biocompatible and potential as drug-delivery vehicles for pharmaceutical application.     

Fabrication of thermo-responsive hydrogels from star-shaped copolymer with a biocompatible β-cyclodextrin core

A thermally reversible hydrogel composed of a three-arm star copolymer with a specific host β-cyclodextrin (β-CD) center has been developed. The synthesis of this star copolymer initiates with β-CD core, from which sequential polymerization of a temperature-responsive poly(N-isopropylacrylamide) (PNIPAM) block and a hydrophilic poly(N,N-dimethylacrylamide) (PDMA) block as asymmetric arms (named β-CD-g-(PNIPAM-b-PDMA)₃) is performed via RAFT protocol. Below the lower critical solution temperature (LCST) of PNIPAM segment, the polymer is of good water-solubility and exhibits a sol state. Upon thermal stimulus, free-standing hydrogels can be formed rapidly at sufficiently high concentrations. By comparing the sol–gel transition of the star polymer with that of its linear counterpart without this feature, we concluded that the special star-shape topology and the thermal-collapsed PNIPAM chains were responsible for this gelation behavior. The rheology measurements indicate the mechanical properties of the polymer hydrogels and the thermal reversibility of the sol–gel transition. Using Rhodamine B as a molecule to model a typical drug, we realize the favorable encapsulation and releasing process from the hydrogel, demonstrating that this star polymer has the potential to function as an injectable hydrogel for drug delivery and gene transport.     

A delicate ionizable-group effect on self-assembly and thermogelling of amphiphilic block copolymers in water

A carboxyl-capped PLGA-PEG-PLGA block copolymer (PLGA: poly(d,l-lactic acid-co-glycolic acid), PEG: poly(ethylene glycol)) was synthesized, and its self-assembly and thermogelling behaviors in water were studied at different pH values. While the aqueous solution of the virgin PLGA-PEG-PLGA block copolymer with the composition in this paper did not undergo sol-gel transition, that of the end-capped derivative exhibited four macroscopic states, sol, turbid sol, physical gel, and precipitate, dependent upon temperature and pH. Especially between pH 4.5 and 5.0, a concentrated aqueous system underwent sol-gel-(turbid sol)-precipitate transitions upon increase of temperature. Complex of dissociation constant pK_a of weak-acid groups on the micelle surfaces was illustrated. Dynamic light scattering, hydrophobic dye solubilization, transmission electron microscopy, NMR, and potentiometric titration were used to examine the relationship between ionization of the end groups of the polymer chains on the molecular level, micellization of the amphiphilic block copolymers on the supermolecular level, and physical gelation on the macroscopic level. The present research reveals the complex of the multi-scale self-assembly of amphiphilic polymer ionomers in a selective solvent.     

pH/temperature sensitive poly(ethylene glycol)-based biodegradable polyester block copolymer hydrogels

Novel pH and temperature sensitive biodegradable block copolymers composed of poly(ethylene glycol) (PEG), polyglycolide (GA), ?-caprolactone (CL) and sulfamethazine oligomers (OSMs) were synthesized by ring opening polymerization and 1,3-dicyclohexyl-carbodiimide (DCC) mediated coupling reactions. Their physicochemical properties in aqueous media were characterized by ¹H NMR spectroscopy and gel permeation spectroscopy. The sol-gel phase transition behavior of OSM-PCGA-PEG-PCGA-OSM block copolymers was investigated both in solution and injection to PBS buffer at pH 7.4 and 37 °C. Aqueous solutions of OSM-PCGA-PEG-PCGA-OSM changed from a sol to a gel phase with increasing temperature and decreasing pH. The sol-gel transition properties of these block copolymers are influenced by the hydrophobic/hydrophilic balance of the copolymers, block length, hydrophobicity, stereoregularity of the hydrophobic components within the block copolymer, and the ionization of the pH functional groups in the copolymer, which depends on the environmental pH. Degradation of the triblock and pentablock copolymers at 37 °C (pH 7.4), and at 0 °C and 5 °C both at pH 8.0, was investigated. It was demonstrated here using the in vitro test method, that the anticancer agent paclitaxel (PTX) could be loaded and released by the pH and temperature sensitive OSM-PCGA-PEG-PCGA-OSM block copolymer, such that this could be used as a suitable matrix for subcutaneous injection in drug delivery systems.     

Synthesis and aggregation behavior of four types of different shaped PCL‐PEG block copolymers

Biodegradable, amphiphilic, linear (diblock and triblock) and star‐shaped (three‐armed and four‐armed) poly[(ethylene glycol)‐block‐(ε‐caprolactone)] copolymers (PEG–PCL copolymers) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL) with stannous octoate as a catalyst, in the presence of monomethoxypoly(ethylene glycol) (MPEG), poly(ethylene glycol) (PEG), three‐armed poly(ethylene glycol) (3‐arm PEG) or four‐armed poly(ethylene glycol) (4‐arm PEG) as an initiator, respectively. The monomer‐to‐initiator ratio was varied to obtain copolymers with various PEG weight fractions in a range 66–86%. The molecular structure and crystallinity of the copolymers, and their aggregation behavior in the aqueous phase, were investigated by employing ¹H‐NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry, as well as utilizing the observational data of gel–sol transitions and aggregates in aqueous solutions. The aggregates of the PEG–PCL block copolymers were prepared by directly dissolving them in water or by employing precipitation/solvent evaporation technique. The enthalpy of fusion (ΔH_m), enthalpy of crystallization (ΔH_crys) and degrees of crystallinity (χ_c) of PEG blocks in copolymers and the copolymer aggregates in aqueous solutions were influenced by their PEG weight fractions and molecular architecture. The gel–sol transition properties of the PEG–PCL block copolymers were related to their concentrations, composition and molecular architecture. Copyright © 2006 Society of Chemical Industry     

Preparation and characterization of poly(ϵ‐caprolactone‐co‐p‐dioxanone)–poly(ethylene glycol)–poly(ϵ‐caprolactone‐co‐p‐dioxanone)/bioactive inorganic particle nanocomposites

With an aim to develop injectable hydrogel with improved solution stability and enhanced bone repair function, thermogelling poly(ε‐caprolactone‐co‐p‐dioxanone)‐poly(ethylene glycol)‐poly(ε‐caprolactone–co‐p‐dioxanone) (PECP)/bioactive inorganic particle nanocomposites were successfully prepared by blending the triblock copolymer (PECP) with nano‐hydroxyapatite (n‐HA) or nano‐calcium carbonate (n‐CaCO₃). The hydrogel nanocomposites underwent clear sol–gel transitions with increasing temperature from 0 to 50°C. The obtained hydrogel nanocomposites were investigated by ¹H NMR, FT‐IR, TEM, and DSC. It was found that the incorporation of inorganic nanoparticles into PECP matrix would lead to the critical gelation temperature (CGT) shifting to lower values compared with the pure PECP hydrogel. The CGT of the hydrogel nanocomposites could be effectively controlled by adjusting PECP concentration or the content of inorganic nanoparticles. The SEM results showed that the interconnected porous structures of hydrogel nanocomposites were potentially useful as injectable scaffolds. In addition, due to the relatively low crystallinity of PECP triblock copolymer, the aqueous solutions of the nanocomposites could be stored at low temperature (5°C) without crystallization for several days, which would facilitate the practical applications. The PECP/bioactive inorganic particle hydrogel nanocomposites are expected to be promising injectable tissue engineering materials for bone repair applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Study of novel biodegradable thermo‐sensitive hydrogels of methoxy‐poly(ethylene glycol)‐block‐polyester diblock copolymers

A series of biodegradable thermo‐sensitive hydrogels were synthesized by ring‐opening polymerization of methoxy‐poly(ethylene glycol) (mPEG) and various ester monomers, i.e. D ,L ‐lactide, glycolide, β‐propiolactone, δ‐valerolactone and ε‐caprolactone. The copolymers were characterized using ¹H NMR spectroscopy and gel permeation chromatography. The micelle properties were also measured. The results indicated that the diblock copolymers formed nano‐micelles at low concentrations in aqueous phase. The lower critical solution temperatures of the diblock copolymers were above 35 °C at 1 wt%. As the temperature increased above room temperature, the diblock copolymer solutions underwent a sol‐to‐gel phase transition, which was manifested in viscosity increases, indicative of the formation of a gel. The mPEG–polyester diblock copolymer solutions exhibited sol‐gel transition behavior as a function of temperature and polymer concentration. Copyright © 2010 Society of Chemical Industry     

Synthesis and micellization of a new amphiphilic star-shaped poly(D,L-lactide)/polyphosphoester block copolymer

A new amphiphilic 4-arm star-shaped poly(D,L-lactide)/poly(ethyl ethylene phosphate) (ssPLA-b-PEEP) block copolymer was synthesized by ring-opening polymerization of ethyl ethylene phosphate (EEP) with hydroxyl terminated 4-arm star-shaped poly(D,L-lactide) (ssPLA) as a macroinitiator, which was prepared by ring-opening polymerization of D,L-lactide (LA) initiated by pentaerythrite using stannous octoate as catalyst. The structures of the block copolymers were confirmed by IR, ¹H-NMR and GPC analysis. Fluorescence measurements were applied to determine the critical micelle concentration (CMC) of the copolymer micelle solutions. The diameter and the distribution of micelles were characterized by dynamic light scattering (DLS) and the shape was perceived by transmission electron microscopy (TEM). The results indicated those copolymers formed nano-micelles in aqueous solution with hydrophobic poly(D,L-lactide) core and hydrophilic poly(ethyl ethylene phosphate) shell. The CMC of the copolymer solutions increased with the increments of the proportion of PEEP segments. TEM images demonstrated that all micelles were spherical.     

Amino acid functionalized pH- and temperature-sensitive biodegradable injectable hydrogels: synthesis,physicochemical characterization and in vivo degradation kinetics

Abstract

In recent years, injectable hydrogels that undergo sol-to-gel phase transition in response to the physiological pH- and temperature have attracted increasing attention in therapeutics delivery. In this study, we developed a biodegradable pH- and temperature-sensitive pentablock copolymers by chemical conjugation of L-cysteine oligomer to the backbone of poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) (PCLA-PEG-PCLA) copolymers. A series of pentablock copolymers with various chain lengths were prepared by tuning the reaction time and temperature. These copolymers were freely soluble in water at high pH and low temperature; whereas, they could form a stable gel at the physiological condition (pH 7.4, 37?°C). An in vivo injectable study in the back of Sprague-Dawley (SD) rats indicated that the copolymer could form an in situ gel. In addition, an in vivo biodegradation study of the hydrogels showed controlled degradation of the gel matrix without inflammation at the injection site. Overall, our results show that biodegradable pH- and temperature-responsive hydrogel prepared in this study found to be bioresorbable and could be used as a controlled therapeutics delivery vehicle.     

Sulfonamide functionalized amino acid-based pH- and temperature-sensitive biodegradable injectable hydrogels: Synthesis,physicochemical characterization and in vivo degradation kinetics

In this research, a novel pH and temperature-sensitive biodegradable oligomer serin-b-poly(lactide)-b-poly (ethylene glycol)-b-poly(lactide)-b- oligomer serin (OS-PLA–PEG–PLA-OS) pentablock copolymer was synthesized with modification of serine to sulfonamide group. The properties of the different pentablock copolymer structures were detail characterized. The copolymer solution easily flowed at high pH and changed to gel state at physiological conditions (37°C, pH 7.4). The sol to gel behavior of these block copolymer solutions were controllable by tuning the length of PEG segment, PLA/PEG block ratio, the molecular weight and the concentration of the pentablock copolymer. The in vivo gelation of the copolymer solution was investigated. The stable gel was formed after injection into the back of the adult male Mus musculus Swiss Albino mice. The degradation process was observed after 6 weeks and showed that the hydrogel depot was bioresorbable without any detection of inflammation sign. The results in this study suggest that the OS-PLA–PEG–PLA-OS pentablock copolymer has the potential application as an injectable delivery vehicle for therapeutic drugs that easily denatured at low-pH condition.     

pH/temperature-sensitive 4-arm poly(ethylene glycol)-poly(amino urethane) copolymer hydrogels

A series of novel pH/temperature-sensitive 4-arm poly(ethylene glycol)-poly(amino urethane) copolymers was synthesized via addition polymerization. The resulting copolymers were characterized by ¹H, ¹³C NMR, Fourier transform infrared spectroscopy and gel permeation chromatography. Poly(amino urethane) (PAU) segment acts as a pH/temperature-sensitive block. The copolymer aqueous solutions showed a sol-to-gel-to-aggregation phase transition as a function of pH and temperature when the pH of the copolymer solution is higher than 6.8. The sol-gel phase transition could be controlled by varying the PAU block length and copolymer concentration. The gel window covers the physiological conditions and a white gel was formed rapidly after subcutaneously injecting the copolymer solution (30 wt%) into SD rats. The in vitro release of chlorambucil, an anticancer drug, was sustained over 14 days under physiological conditions.     

Synthesis and characterization of temperature and pH-responsive pentablock copolymers

A family of amphiphilic ABCBA pentablock copolymers based on commercially available Pluronic^® F127 block copolymers and various amine containing methacrylate monomers was synthesized via Cu(I) mediated controlled radical polymerization. The block architecture and chemical composition of the pentablock copolymers were engineered to exhibit both temperature and pH responsive self-assembly by exploiting the lower critical solution temperature of the poly(ethylene oxide)/poly(propylene oxide) blocks and the polycationic property of the poly(amine methacrylate) blocks, respectively. In aqueous solutions, the pentablock copolymers formed temperature and pH-responsive micelles. Concentrated aqueous solutions of the copolymer formed a pH-responsive, thermoreversible gel phase. The controlled radical synthesis route yielded well-defined copolymers with narrow molecular weight distributions with the benefit of mild reaction conditions. Small angle X-ray scattering, laser light scattering, cryogenic transmission electron microscopy and dynamic mechanical analysis have been used to characterize the self-assembled structures of the micellar solution and gel phases of the aqueous copolymer system. These copolymers have potential applications in controlled drug delivery and non-viral gene therapy due to their tunable phase behavior and biocompatibility.     

Synthesis and characterization of four- and six-arm star-shaped poly(ε-caprolactone)-b-poly(N-vinylcaprolactam): Micellar and core degradation studies

Star-shaped copolymers with four and six poly(ε-caprolactone)-block-poly(N-vinylcaprolactam) (S(PCL-b-PNVCL)) arms were successfully synthesized by combining ring opening polymerization (ROP) of ε-caprolactone (CL) and reversible addition-fragmentation chain transfer (RAFT) polymerization of N-vinylcaprolactam (NVCL). The resulting star copolymers were characterized using ¹H NMR, GPC and UV–vis. The numbers of arms in the star-shaped PCL-b-PNVCL block copolymers were demonstrated using degradation studies under acidic conditions, and the individual PNVCL chains were characterized by GPC and ¹H NMR. In aqueous solution, star-shaped PCL-b-PNVCL block copolymers self-assembled into large aggregates or micelles with sizes varying from 54 to 300 nm, depending on the molecular weight of the copolymer and the relative lengths of the hydrophobic and hydrophilic segments. Micelles were characterized by atomic force microscopy (AFM), dynamic light scattering (DLS) and scanning electron microscopy (SEM).     

Injectable hydrogels of poly(?-caprolactone-co-glycolide)-poly(ethylene glycol)-poly(?-caprolactone-co-glycolide) triblock copolymer aqueous solutions

Thermogelling triblock copolymers of poly(?-caprolactone-co-glycolide)-poly(ethylene glycol)-poly(?-caprolactone-co-glycolide) [P(CL-GA)-PEG-P(CL-GA)] were successfully prepared by control of the hydrophilicity/hydrophobicity balance and chemical compositions of the copolymers. The aqueous solutions of the copolymers underwent sol-gel transition as the temperature was increased from 20 to 60 °C. The amphiphilic copolymer formed micelles in water and a gel was formed by aggregation of micelles. The structure parameters played a critical role in determining sol-gel transition behavior. Either increasing [GA]/[CL] ratio or decreasing P(CL-GA) block length could induce the increase of the lower sol-gel transition temperature. Glycolide (GA) was incorporated into the polymer chain to increase the polymer degradation rate. Sustained release of rifampicin for approximately 32 days was obtained from the gel. It is believed to have potential applications in drug delivery and tissue engineering.     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Synthesis, characterization and thermal properties of hexaarmed star-shaped poly(ε-caprolactone)-b-poly(d,l-lactide-co-glycolide) initiated with hydroxyl-terminated cyclotriphosphazene

Hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene was prepared by the reaction of hexachlorocycltriphosphaneze with the sodium salt of 4-hydroxybenzaldehyde and subsequent reduction of aldehyde groups to alcohol groups by using sodium borohydride. Hexaarmed star-shaped hydroxyl-terminated poly(ε-caprolactone) (PCL) were successfully synthesized via ring-opening polymerization of ε-caprolactone (CL) with the above hydroxyl-terminated cyclotriphosphazene initiator and stannous octoate catalyst in bulk. The number-average molecular weight of PCL linearly increased with the molar ratio of monomer to initiator. The star-shaped PCL with hydroxy end groups could be used as a macroinitiator for block copolymerization with d,l-lactide (d,l-LA) and glycolide (GA) using stannous octoate catalyst. IR, ¹H NMR and GPC analysis showed the star-block copolymers were successfully synthesized and the molecular weights and the unit composition of the star-shaped block copolymers were controlled by the molar ratios of d,l-LA and GA monomers to CL. The copolymer presented a two-phase structure, namely, PCL crystalline and d,l-LAGA amorphous domains, which made the copolymer different from linear PCL and star-shaped PCL in crystallinity and thermal behaviors.     

pH- and temperature-sensitive multiblock copolymer hydrogels composed of poly(ethylene glycol) and poly(amino urethane)

A series of novel pH- and temperature-responsive multiblock copolymers (poly(PEG/HEP urethane)) consisting of poly(ethylene glycol) (PEG) and poly(amino urethane) (PAU) were synthesized, and their physicochemical properties were studied. The amphiphilic block copolymers were synthesized from PEG, 1,4-bis(hydroxyethyl) piperazine (HEP) and 1,6-diisocyanato hexamethylene (HDI) in the presence of dibutyltin dilaurate as a catalyst. The resulting polymers were examined by FT-IR, ¹H and ¹³C NMR spectroscopies and gel permeation chromatography (GPC). The solution properties of the copolymers were studied by turbidity measurement and fluorescence spectroscopy. The copolymers showed a pH-dependent soluble-insoluble transition in diluted aqueous solutions. The concentrated polymer solutions exhibited a thermo-induced sol-gel-sol phase transition at pH 6.8-7.4. The gel window covers the physiological conditions. After a subcutaneous injection of the multiblock copolymer solution into mice, a transparent and soft gel was formed immediately. The in vitro release of a model anticancer drug, chlorambucil, persisted over 2 weeks under physiological conditions.     

Synthesis,morphology and properties of poly(dimethylsiloxane)/poly(n-butyl acrylate) mixed soft block-based copolymers: A new class of thermoplastic elastomer

Design, synthesis, morphology, mechanical properties and in vitro oxidative stability of new class of surface modified thermoplastic elastomers containing mixed soft rubbery poly(n-butyl acrylate-b-dimethylsiloxane-b-n-butyl acrylate) (PnBA-b-PDMS-b-PnBA) block and glassy poly methyl methacrylate (PMMA) end blocks have been reported. Thus well-defined pentablock copolymers such as PMMA-b-PnBA-b-PDMS-b-PnBA-b-PMMA were synthesized by Atom Transfer Radical Polymerization (ATRP). Moderate amount of PDMS (8–15 wt%) in the copolymers significantly enhances the oxidative stability of the surface and contact angle of water in compare to neat PMMA-b-PnBA-b-PMMA copolymer. The phase morphology of such type of copolymers was studied in detailed which suggests that the mixed soft PnBA-b-PDMS-b-PnBA part forms single phase and the degree of phase separation between PnBA-b-PDMS-b-PnBA and PMMA in PMMA-b-PnBA-b-PDMS-b-PnBA-b-PMMA copolymer is higher than the degree of phase separation between PnBA and PMMA in PnBA-b-PDMS-b-PnBA copolymer. This approach of surface modification was extended to synthesize PMMA-b-PLMA-b-PDMS-b-PLMA-b-PMMA (PLMA = polylauryl methacrylate) block copolymers with improved surface properties.