Fluorescent chemosensor for metal ions based on optically active polybinaphthyls and 1,3,4-oxadiazole

Linear chiral polymers P-1 and P-2 were synthesized by the polymerization of (R)-5,5′-dibromo-6,6′-di(4-methylphenyl)-2,2′-bisoctoxy-1,1′-binaphthyl (R-M-1) with 2,5-di(4-vinylphenyl)-1,3,4-oxadiazole (M-2) and 2,5-di(4-tributylstannylphenyl)-1,3,4-oxadiazole (M-3) via Heck and Stille cross-coupling reaction, respectively. The chiral conjugated polymer P-1 can show strong green-blue fluorescence, and the chiral polymer P-2 shows strong blue fluorescence. While the conjugated polymers P-1 and P-2 were used as fluorescent chemosensor for metal ions, their fluorescence can be efficiently quenched on the addition of different metal ions. The obvious quenching effect of the polymers P-1 and P-2 indicates that the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT) between the polymer backbone and receptor-ions in the main chain of fluorescent chemosensor can lead to the pronounced fluorescence quenching. The results also show that the chiral polymers P-1 and P-2 incorporating 1,3,4-oxadiazole moiety as the recognition site can act as a special fluorescent chemosensor for the appropriate detection of the sensitive and selective sense of metal ions.     

A fluorescence sensor based on chiral polymer for highly enantioselective recognition of phenylalaninol

The chiral polymer P-1 incorporating (S)-2,2′-binaphthol (BINOL) and (S)-2,2′-binaphthyldiamine (BINAM) moieties in the main chain of the polymer backbone was synthesized by the polymerization of (S)-6,6′-dibutyl-3,3′-diformyl-2,2′-binaphthol (S-M-1) with (S)-2,2′-binaphthyldiamine (S-M-2) via nucleophilic addition-elimination reaction, and the chiral polymer P-2 could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence intensity of the chiral polymer P-1 exhibits gradual enhancement upon addition of (d)- or (l)-phenylalaninol and keeps nearly a linear correlation with the concentration molar ratios of (d)- or (l)-phenylalaninol. The value of enantiomeric fluorescence difference ratio (ef) is 6.85 for the chiral polymer on (d)-phenylalaninol. On the contrary, the chiral polymer P-2 shows no obvious fluorescence response toward either (d)- or (l)-phenylalaninol.     

A highly selective and sensitive fluorescence chemosensor based on optically active polybinaphthyls for Hg

The chiral polymer was synthesized by the polymerization of 4,7-diethynylbenzo[2,1,3]-thiadiazole (M-1) with (R)-6,6′-dibutyl-3,3′-diiodo-2,2′-bis(diethylaminoethoxy)-1,1′-binaphthyl (R-M-1) via Pd-catalyzed Sonogashira reaction. The chiral polymer has orange fluorescence due to the extended π-electronic structure between binaphthyl unit and benzo[2,1,3]thiadiazole (BT) group via ethynyl bridge. The responsive optical properties of the polymer on various metal ions were investigated by fluorescence spectra. The fluorescence of the chiral polymer can produce the pronounced enhancement as high as 1.8-fold upon addition of 1:2 molar ratio of Hg²⁺. Compared with other cations, such as K⁺, Mg²⁺, Pb²⁺, Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, Zn²⁺, Mn²⁺ and Fe³⁺, Hg²⁺ can produce the pronounced fluorescence response of the polymer. The result indicates this kind of chiral polybinaphthyls incorporating diethylamino and benzo[2,1,3]thiadiazole (BT) moieties as receptors exhibits highly sensitive and selective behavior for Hg²⁺ detection.     

A polymer based fluorescent sensor for Zn detection and its application for constructing logic gates

A polymer-based fluorescent sensor was synthesized by polymerization of (S)-6,6′-dibutyl-3,3′-(di-5-salicylde-ethynyl)-2,2′-binaphthol (M-1) with (R,R)-1,2-diaminocyclohexane (M-2) via nucleophilic addition-elimination reaction. The responsive optical properties of the polymer on transition metal ions were investigated by fluorescence and UV-vis spectra. The polymer (1.0 × 10⁻⁵ mol/L in THF) could emit fluorescence at 550 nm and exhibit high selectivity for sensing Zn²⁺ with 36.1-fold fluorescence enhancement. Three logic gates were designed according to the different fluorescence responses of this polymer sensor to Zn²⁺ and Cu²⁺.     

Polybinaphthyls incorporating chiral 2,2′-binaphthyl and isoquinoline moieties by Sonogashira reaction

Polymers P-1, P-2, P-3, P-4 and P-5 were synthesized by the polymerization of 5,8-bis(ethynyl)isoquinoline (M-1) with (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-2), (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-2), (R)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-3), (S)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-3), and rac-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl (M-4) under Sonogashira reaction, respectively. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. CD spectra of polymers P-1 and P-2, P-3 and P-4 are almost identical except that they gave opposite signals at each wavelength. The long wavelength CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and the helical backbone in the polymer chain. All five polymers have strong blue-green fluorescence due to the efficient energy migration from the extended π-electronic structure of the repeating unit of the polymers to the chiral binaphthyl core and are expected to provide understanding of structure-property relationships of the chiral conjugated polymers.     

(R,R)-salen/salan-based polymer fluorescence sensors for Zn detection

(R,R)-salen-based polymer fluorescence sensor P-1 could be synthesized by the polymerization of 5,5′-(isoquinoline-5,8-diylbis(ethyne-2,1-diyl))-bis(3-tert-butyl-2-hydroxybenzaldehyde) (M-1) with (R,R)-1,2-diaminocyclohexane (M-2) via nucleophilic addition-elimination reaction, and (R,R)-salan-based polymer sensor P-2 could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response behaviors of two chiral polymers P-1 and P-2 on Zn²⁺ were investigated by fluorescence spectra. The fluorescence intensities of P-1 and P-2 can exhibit gradual enhancement upon addition of Zn²⁺. Compared with other cations, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Cr³⁺ and Pb²⁺, Zn²⁺ can lead to the pronounced fluorescence enhancement as high as 22.8-fold for P-1 and 3.75-fold for P-2, respectively. The results show that P-1 and P-2 incorporating (R,R)-salen/salan moieties as receptors in the polymer main chain backbone can exhibit high sensitivity and selectivity for Zn²⁺ detection.     

A highly selective fluorescent sensor for Hg based on the water-soluble poly(p-phenyleneethynylene)

The conjugated polymer P-1 could be synthesized by the polymerization of 4,7-diethynyl-benzo[2,1,3]thiadiazole (M-1) and 1,4-bis[3′-(N,N-diethylamino)-1′-oxapropyl]-2,5-diiodobenzene (M-2) via Pd-catalyzed Sonogashira reaction. The water-soluble conjugated polyelectrolyte P-2 could be obtained by the reaction of P-1 with ethyl bromide. Both P-1 and P-2 can emit orange fluorescence. The responsive optical properties of P-1 and P-2 on Hg²⁺ were investigated by fluorescence spectra. Hg²⁺ can lead to nearly complete fluorescence quenching of P-1. On the contrary, Hg²⁺ can show the most pronounced fluorescence enhancement response of P-2 in aqueous solution without interference from those coexistent ions, such as K⁺, Mg²⁺, Pb²⁺, Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Zn²⁺. The results also exhibit that this kind of water-soluble conjugated polyelectrolyte can be used as a highly sensitive and selective fluorescence sensor for Hg²⁺ detection in water.     

Fluorescence sensors based on chiral polymer for highly enantioselective recognition of phenylglycinol

Chiral polymer P-1 incorporating (R,R)-salen-type unit was synthesized by the polymerization of (R,R)-1,2-diaminocyclohexane with 2,5-dibutoxy-1,4-di(5-tert-butylsalicyclaldehyde)-phenylene (M-1) via nucleophilic addition-elimination reaction, and chiral polymer P-2 incorporating (R,R)-salan-type unit could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response of two chiral polymers P-1 and P-2 on (R)- or (S)-phenylglycinol were investigated by fluorescence spectra. The fluorescence intensities of two chiral polymers P-1 and P-2 show gradual enhancement upon addition of (R)- or (S)-phenylglycinol and keeps nearly linear correlation with the concentration molar ratios of (R)- or (S)-phenylglycinol. But both P-1 and P-2 exhibited more sensitive response signals for (S)-phenylglycinol. The values of enantiomeric fluorescence difference ratio (ef) are 1.84 and 2.05 for P-1 and P-2, respectively. The results also showed that two chiral polymers P-1 and P-2 can also be used as fluorescence sensors for enantiomer composition determination of phenylglycinol.     

Polybinaphthyls incorporating chiral (R) or (S)-2,2′-binaphthyland oxadiazole moieties by Stille reaction

Chiral polymers P-1 and P-2 were prepared by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-1) with 2,5-bis[(4-tributylstannyl)phenyl]-1,3,4-oxadiazole (M-2) via Pd(PPh₃)₄ catalyzed Stille coupling reaction. 1,3,4-Oxadiazole unit not only has high electron affinity, high thermal and oxidative stability, but also serves as a good chromophore. Polymers have strong blue fluorescence due to the efficient energy migration from the extended π-electronic structure of the polymers to the chiral binaphthyl core and can be expected to have potential application in the materials of fluorescent sensors. Circular dichroism (CD) spectra of polymers P-1 and P-2 are almost identical except that they gave opposite signals at each wavelength. The long wavelengths CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and a high rigidity of the polymer backbone.     

Polymeric molecular shuttles: Polypseudorotaxanes & polyrotaxanes based on viologen (paraquat) urethane backbones & bis(p-phenylene)-34-crown-10

Reaction of di(p-isocyanatophenyl)methane (MDI, 4) with N,N′-di(2-hydroxyethyl)- (1b) or N,N′-di[2-(2′-hydroxyethoxy)ethyl]-4,4′-bipyridinium di(hexafluorophosphate) (1e) and other diols [oligo(ethylene glycol)s and poly(tetramethylene oxide)s] in the presence of bis(p-phenylene)-34-crown-10 (2) afforded polyurethane (pseudo)rotaxanes as statistical (7P or 7R) and segmented analogs 10P (P = pseudorotaxane, R = rotaxane). In 7R a bulky alcohol was incorporated at the chain ends and in 13R a bulky diol as in-chain units to form polyrotaxanes and preclude the possibility of dethreading. The crown ether 2 in 10P and 13R was shown by ¹H NMR spectroscopy to be shuttling between the viologen (paraquat) and urethane sites; in DMSO the crown ether prefers the urethane site, probably because of H-bonding with the N–H moieties and complexation of the pyridinium site by the dipolar solvent, while in acetone at low temperatures the viologen site is preferred by the crown ether, with ΔH = −6.91 kcal/mol and ΔS = −22.9 eu for 13R.     

Catalysts for the ring-opening polymerization of ε-caprolactone and l-lactide and the mechanistic study

Two novel magnesium aryloxides have been prepared and their catalytic activities toward ring-opening polymerization (ROP) of ε-caprolactone and l-lactide have been investigated. The reaction of 2,2′-(2-methoxybenzylidene)-bis(4,6-di(1-methyl-1-phenylethyl)phenol) (MEMPEP-H₂) (1) and 2,2′-methylene-bis(4,6-di(1-methyl-1-phenylethyl)phenol) (MMPEP-H₂) with ⁿBu₂Mg yield dimeric magnesium complexes [Mg(μ-MEMPEP)(THF)]₂ (2) and [Mg(μ-MMPEP)(THF)]₂ (3), respectively. Catalytic studies of complexes 2 and 3 illustrate that both 2 and 3 are good catalysts in ε-caprolactone and l-lactide polymerization. Theoretical study of the ROP mechanism of ε-caprolactone catalyzed by 2 demonstrates that the initiator, benzyl alcohol, is activated by the formation of a hydrogen bond with the phenoxy oxygen of MEMPEP²⁻ ligand.     

Synthesis of 1,9-bis[glycidyloxypropyl]penta(1′H,1′H,2′H,2′H-perfluoroalkylmethylsiloxane)s and copolymerization with piperazine

A series of 1,9-bis[glycidyloxypropyl]pentasiloxanes (IV-VI) were prepared by the platinum catalyzed hydrosilylation of 1,9-dihydridodecamethylpentasiloxane (I), 1,9-dihydrido-3,5,7-tris(3′,3′,3′-trifluoropropyl)heptamethylpentasiloxane (II), and 1,9-dihydrido-3,5,7-tris(1′H,1′H,2′H,2′H-perfluorooctyl)heptamethylpentasiloxane (III) with allyl glycidyl ether. Subsequently, IV-VI were copolymerized with piperazine to form high molecular weight copoly(carbosiloxane)s (VII-IX). The structures of the 1,9-bis[glycidyloxypropyl]penta-siloxanes (IV-VI) and copoly(carbosiloxane)s (VII-IX) were determined by ¹H, ¹³C, ²⁹Si, and ¹⁹F NMR as well as IR spectroscopy. The molecular weight distributions (M_w/M_n) of VII-IX have been characterized by gel permeation chromatography and their thermal properties measured by differential scanning calorimetry and thermal gravimetric analysis.     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Redox and catalytic properties of new polypyrrole modified electrodes functionalized by [Ru(bpea)(bpy)H2O] complexes; bpea=N,N′-bis(2-pyridylmethyl)ethylamine, bpy=2,2′-bipyridine

New ruthenium(II) complexes containing one or two pyrrole-functionalized polypyridylic ligands have been prepared in order to study their electrochemical behaviour in heterogeneous phase, after anodic polymerization from CH₂Cl₂ solution on an electrode surface. Complexes containing one pyrrole unit have general formula [Ru(bpea-pyr)(bpy)(L)]²⁺ (bpea-pyr=N-[3-bis(2-pyridylmethyl)aminopropyl]pyrrole, bpy=2,2′-bipyridine, L=Cl, complex 3, or L=H₂O, complex 1), whereas compounds having two pyrrole units correspond to [Ru(bpea-pyr)(bpy-pyr)(L)]²⁺ (bpy-pyr=4-methyl-4′-pyrrolylbutyl-2,2′-bipyridine, L=Cl, complex 4, or L=H₂O, complex 2). Upon oxidative polymerization, all complexes form highly stable polypyrrolic films on a graphite disk electrode surface. An electrode modified with complex 2 polypyrrole coating film, C/poly-2, has been tested as heterogeneous catalyst for the oxidation of benzyl alcohol, showing a remarkably high efficiency and notably improving the results obtained with analogous complexes in homogeneous phase.     

Extraction of metal ions with non-fluorous bipyridine derivatives as chelating ligands in supercritical carbon dioxide

Three new non-fluorous bipyridine derivatives, bis(2-(2-butoxyethoxy)ethyl)-2,2′-bipyridine-4,4′-dicarboxylate (ligand 1), bis(2-(2-ethoxyethoxy)ethyl)-2,2′-bipyridine-4,4′-dicarboxylate (ligand 2), and bis(2-butoxyethyl)-2,2′-bipyridine-4,4′-dicarboxylate (ligand 3), were synthesized as chelating ligands to remove metal ions from solid matrix into supercritical CO₂ (scCO₂). These produced compounds 1-3 showed considerable solubilities in scCO₂ (8.0 g/l, 4.8 g/l, 7.8 g/l for ligands 1-3 at 313 K, respectively) and the tested solubility data were then calculated and correlated with semiempirical model at different pressures and temperatures, which showed satisfactory agreement with each other and the average absolute relative deviation were in the range of 0.1-28.3%. The effects of pressure, temperature, time, and ligand to metal ratio (5:1 to 75:1) on the extraction efficiency of metal ions were also systematically investigated. The extraction efficiency was 100% for Ni²⁺ and 95.9% for Cu²⁺ in scCO₂ with the system of ligand 1, ultrapure water, and perfluoro-1-octanesulfonic acid tetraethylammonium salt (PFOAT) under the optimized conditions (25 MPa, 313 K, 90 min, and ligand to metal ratio of 10). Although all ligands exhibited good efficiency for Ni²⁺ (>85%) and Cu²⁺ (>70%) extraction, the extraction of mixed metal ions indicated that the bipyridine derivatives had low selectivity. Finally, the detailed calculation results exhibited that the extraction constants (K_ex) of the metal ions increased with the increase of the extraction efficiency in the same extraction system for each same metal ion.     

Aromatic diamine-based benzoxazines and their high performance thermosets

Four high-purity aromatic diamine-based benzoxazines (13-16), which could not easily be synthesized by traditional approaches, were successfully synthesized by a facile, widely useful three-step synthetic method using four typical aromatic diamines - 4,4′-diamino diphenyl methane (1), 4,4′-diamino diphenyl sulfone (2), 2,2-bis(4-(4-aminophenoxy)phenyl)propane (3), and bis(4-(4-aminophenoxy)phenyl)ether (4), respectively, as starting materials. The structures of the monomers (5-16) were confirmed by ¹H, ¹³C, ¹H-¹H and ¹H-¹³C NMR spectra. Their high performance thermosets, P(13-16), were obtained by thermal curing of benzoxazines (13-16), and their properties were studied and compared with polymer derived from bis(3,4-dihydro-2H-3-phenyl-1,3-benzoxazinyl)methane (F-a), a typical aromatic biphenol-based benzoxazine. Among the benzoxazines, 13 and F-a are constitutional isomers, but the T_g value and 5% decomposition temperature of P(13) are 53 and 111 °C, respectively, higher than those of P(F-a), demonstrating the power of the molecule-approach to enhance the thermal properties. Because of the large varieties of aromatic diamines, this approach can increase the molecule-design flexibility of benzoxazines.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Cationic phenyl-substituted poly(p-phenylenevinylene) related copolymers with efficient photoluminescence and synthetically tunable emissive colors

A series of amino-functionalized phenyl-substituted poly(p-phenylenevinylene) (PPV) related copolymers were synthesized by Wittig reaction. Their corresponding cationic conjugated polymers were successfully obtained via a post-polymerization approach. On the basis of FT-IR and ¹H NMR spectra, it was found that phenyl-substituted PPV related copolymers containing alkoxylated benzene (neutral polymer P1 and quaternized polymer P1′), phenylated benzene (neutral polymer P2 and quaternized polymer P2′) and fluorene (neutral polymer P3 and quaternized polymer P3′) moieties are of 55, 80, and 45% cis-vinylic linkage respectively while the polymer containing thiophene moiety (neutral polymer P4 and quaternized polymer P4′) is primarily of trans-vinylic linkage. Their photoluminescence (PL) were conveniently tuned from blue color to yellow color by introducing units with different optoelectronic properties into the PPV backbones. The polymer with fluorene unit and bulky phenylene-substituted benzene unit in the backbone exhibited the highest PL efficiency among these neutral and quaternized PPVs. P4′ containing little cis-vinylic linkage showed complete quenching while P1′-P3′ containing much more cis-vinylic linkage showed incomplete quenching, indicating that the quenching behavior of these cationic PPVs may be highly influenced by the content of cis-vinylic linkage in the PPV backbones.