In vitro comparative evaluation of monolayered multipolymeric films embedded with didanosine-loaded solid lipid nanoparticles: a potential buccal drug delivery system for ARV therapy

Drug delivery via the buccal route has emerged as a promising alternative to oral drug delivery. Didanosine (DDI) undergoes rapid degradation in the gastrointestinal tract, has a short half-life and low oral bioavailability, making DDI a suitable candidate for buccal delivery. Recent developments in buccal drug delivery show an increased interest toward nano-enabled delivery systems. The advantages of buccal drug delivery can be combined with that of nanoparticulate delivery systems to provide a superior delivery system. The aim of this study was to design and evaluate the preparation of novel nano-enabled films for buccal delivery of DDI. Solid lipid nanoparticles (SLNs) were prepared via hot homogenization followed by ultrasonication and were characterized before being incorporated into nano-enabled monolayered multipolymeric films (MMFs). Glyceryl tripalmitate with Poloxamer 188 was identified as most suitable for the preparation of DDI-loaded SLNs. SLNs with desired particle size (PS) (201?nm), polydispersity index (PDI) (0.168) and zeta potential (?18.8?mV) were incorporated into MMFs and characterized. Conventional and nano-enabled MMFs were prepared via solvent casting/evaporation using Eudragit RS100 and hydroxypropyl methylcellulose. Drug release from the nano-enabled films was found to be faster (56% versus 20% in first hour). Conventional MMFs exhibited higher mucoadhesion and mechanical strength than nano-enabled MMFs. SLNs did not adversely affect the steady state flux (71.63?±?13.54?µg/cm²?h versus 74.39?±?15.95?µg/cm²?h) thereby confirming the potential transbuccal delivery of DDI using nano-enabled MMFs. Nano-enabled buccal films for delivery of DDI can be successfully prepared, and these physico-mechanical studies serve as a platform for future formulation optimization work in this emerging field.     

Intradermal and follicular delivery of adapalene liposomes

Abstract

Background: Adapalene is a widely used topical anti-acne drug; however, it has many side effects. Liposomal drug delivery can play a major role by targeting delivery to pilosebaceous units, reducing side effects and offering better patient compliance.

Objective: To prepare and evaluate adapalene-encapsulated liposomes for their physiochemical and skin permeation properties.

Methods: A liposomal formulation of adapalene was prepared by the film hydration method and characterized for shape, size, polydispersity index (PDI), encapsulation efficiency and thermal behavior by techniques such as Zetasizer®, differential scanning calorimetry and transmission electron microscopy. Stability of the liposomes was evaluated for three months at different storage conditions. In vitro skin permeation studies and confocal laser microscopy were performed to evaluate adapalene permeation in pig ear skin and hair follicles.

Results: The optimized process and formulation parameters resulted in homogeneous population of liposomes with a diameter of 86.66?±?3.5?nm in diameter and encapsulation efficiency of 97.01?±?1.84% w/w. In vitro permeation studies indicated liposomal formulation delivered more drug (6.72?±?0.83?μg/cm²) in hair follicles than gel (3.33?±?0.26?μg/cm²) and drug solution (1.62?±?0.054?μg/cm²). Drug concentration delivered to the skin layers was also enhanced compared to other two formulations. Confocal microscopy images confirmed drug penetration in the hair follicles when delivered using the liposomal formulation.

Conclusion: Adapalene was efficiently encapsulated in liposomes and led to enhanced delivery in hair follicles, the desired target site for acne.     

Biodegradable nanoparticles for improved kidney bioavailability of rhein: preparation,characterization, plasma,and kidney pharmacokinetics

The aim of this work is to develop biodegradable nanoparticles for improved kidney bioavailability of rhein (RH). RH-loaded nanoparticles were prepared using an emulsification solvent evaporation method and fully characterized by several techniques. Kidney pharmacokinetics was assessed by implanting a microdialysis probe in rat's kidney cortex. Blood samples were simultaneously collected (via femoral artery) for assessing plasma pharmacokinetics. Optimized nanoparticles were small, with a mean particle size of 132.6?±?5.95?nm, and homogeneously dispersed. The charge on the particles was nearly zero, the encapsulation efficiency was 62.71?±?3.02%, and the drug loading was 1.56?±?0.15%. In vitro release of RH from the nanoparticles showed an initial burst release followed by a sustained release. Plasma and kidney pharmacokinetics showed that encapsulation of RH into nanoparticles significantly increased its kidney bioavailability (AUC_kidney/AUC_plasma?=?0.586?±?0.072), clearly indicating that nanoparticles are a promising strategy for kidney drug delivery.     

Dry powder nasal drug delivery: challenges,opportunities and a study of the commercial Teijin Puvlizer Rhinocort device and formulation

Purpose: To discuss the challenges and opportunities for dry powder nasal medications and to put this in to perspective by evaluating and characterizing the performance of the Teijin beclomethasone dipropionate (BDP) dry powder nasal inhaler; providing a baseline for future nasal products development.

Methods: The aerosol properties of the formulation and product performance of Teijin powder intranasal spray were assessed, with a particular focus on particle size distribution (laser diffraction), powder formulation composition (confocal Raman microscope) and aerosol performance data (British Pharmacopeia Apparatus E cascade impactor, aerosol laser diffraction).

Results: Teijin Rhinocort^® (BDP) dry powder spray formulation is a simple blend of one active ingredient, BDP with hydroxypropylcellulose (HPC) carrier particles and a smaller quantity of lubricants (stearic acid and magnesium stearate). The properties of the blend are mainly those of the carrier (D_v50?=_?98?±?1.3?µm). Almost the totality of the capsule fill weight (96.5%) was emitted with eight actuations of the device. Using the pharmacopeia suggested nasal chamber deposition apparatus attached to an Apparatus E impactor. The BDP main site of deposition was found to be in the nasal expansion chamber (90.2?±?4.78%), while 4.64?±?1.38% of the BDP emitted dose was deposited on Stage 1 of the Apparatus E.

Conclusions: The Teijin powder nasal device is a simple and robust device to deliver pharmaceutical powder to the nasal cavity, thus highlighting the robustness of intranasal powder delivery systems. The large number of actuations needed to deliver the total dose (eight) should be taken in consideration when compared to aqueous sprays (usually two actuations), since this will impact on patient compliance and consequently therapeutic efficacy of the formulation.     

Chlorogenic acid stabilized nanostructured lipid carriers (NLC) of atorvastatin: formulation,design and in vivo evaluation

The present work was aimed at developing an optimized oral nanostructured lipid carrier (NLC) formulation of poorly soluble atorvastatin Ca (AT Ca) and assessing its in vitro release, oral bioavailability and pharmacodynamic activity. In this study, chlorogenic acid, a novel excipient having synergistic cholesterol lowering activity was utilized and explored in NLC formulation development. The drug-loaded NLC formulations were prepared using a high pressure homogenization technique and optimized by the Box-Behnken statistical design using the Design-Expert software. The optimized NLC formulation was composed of oleic acid and stearic acid as lipid phase (0.9% w/v), poloxamer 188 as surfactant (1% w/v) and chlorogenic acid (0.05% w/v). The mean particle size, polydispersity index (PDI) and % drug entrapment efficiency of optimized NLC were 203.56?±?8.57?nm, 0.27?±?0.028 and 83.66?±?5.69, respectively. In vitro release studies showed that the release of drug from optimized NLC formulations were markedly enhanced as compared to solid lipid nanoparticles (SLN) and drug suspension. The plasma concentration time profile of AT Ca in rats showed 3.08- and 4.89-fold increase in relative bioavailability of developed NLC with respect to marketed preparation (ATORVA® tablet) and drug suspension, respectively. Pharmacodynamic study suggested highly significant (**p?0.01) reduction in the cholesterol and triglyceride values by NLC in comparison with ATORVA® tablet. Therefore, the results of in vivo studies demonstrated promising prospects for successful oral delivery of AT Ca by means of its chlorogenic acid integrated NLC.     

Preparation of drug nanocrystals embedded in mannitol microcrystals via liquid antisolvent precipitation followed by immediate (on-line) spray drying

The aim of this study is to investigate the feasibility of producing pharmaceutical nanoformulations for enhanced oral or pulmonary delivery of poorly water-soluble drugs via liquid antisolvent precipitation followed by immediate (on-line) spray drying. A poorly water-soluble corticosteroid, budesonide, was chosen as the model drug. Budesonide nanoparticles were prepared through liquid antisolvent precipitation, and then processed into a powdered nanoformulation which consists of budesonide nanoparticles embedded in mannitol microcrystals by immediate (on-line) spray drying. The size of the freshly precipitated and the reconstituted budesonide particles was analyzed by dynamic light scattering (DLS). The spray-dried nanoformulation, together with budesonide and mannitol raw materials, their physical mixture and the spray-dried mannitol, were characterized by field emission scanning electron microscopy (FESEM), differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). In vitro dissolution test and aerosol deposition study were conducted on the spray-dried nanoformulation and the physical mixture of budesonide and mannitol raw materials. It was found that the spray-dried nanoformulation, consisting of mannitol microcrystals comprising budesonide nanocrystals with z-average mean size of 520?±?11.4?nm, exhibited enhanced drug dissolution rate and higher fine particle fraction (FPF). The results of this study indicated the potential of the combined process of liquid antisolvent precipitation followed by immediate (on-line) spray drying to be used as a direct and continuous formulation process to produce powdered nanoformulations to achieve enhanced oral or pulmonary delivery of poorly water-soluble drugs.     

Micronized drug powders in binary mixtures and the effect of physical properties on aerosolization from combination drug dry powder inhalers

Objectives: To evaluate physicochemical properties of two micronized drugs, salbutamol sulfate (SS) and beclomethasone dipropionate (BDP) prepared as dry powder inhalation physical blends. Methods: Five different blends of SS:BDP ratios of 0:100, 25:75, 50:50, 75:25, and 100:0 (w/w) were prepared. Aerosolization performance was evaluated using a multistage impinger and a Rotahaler® device. Results: The median SS particle diameter was larger than BDP (4.33?±?0.37 µm compared to 2.99?±?0.15 µm, respectively). The SS appeared to have a ribbon-like morphology, while BDP particles had plate-like shape with higher cohesion than SS. This was reflected in the aerosolization performance of the two drugs alone, where SS had a significantly higher fine particle fraction (FPF) than BDP (12.3%, 3.1% and 2.9%, 0.2%, respectively). The study of cohesion versus adhesion for a series of SS and BDP probes on SS and BDP substrates suggested both to be moderately adhesive, verified using scanning Raman microscopy, where a physical association between the two was observed. A plot of loaded versus emitted dose indicated that powder bed fluidization was significantly different when the drugs were tested individually. Furthermore, the FPF of the two drugs from the binary blends, at all three ratios, were similar. Conclusions: Such observations indicate that when these two drugs are formulated as a binary system, the resulting powder structure is altered and the aerosolization performance of each drug is not reflective of the individual drug performance. Such factors could have important implications and should be considered when developing combination dry powder inhalation systems.     

Nanocarrier-based topical drug delivery for an antifungal drug

Objective: The conventional liposomal amphotericin B causes many unwanted side effects like blood disorder, nephrotoxicity, dose-dependent side effects, highly variable oral absorption and formulation-related instability. The objective of the present investigation was to develop cost-effective nanoemulsion as nanocarreir for enhanced and sustained delivery of amphotericin B into the skin.

Methods and characterizations: Different oil-in-water nanoemulsions were developed by varying the composition of hydrophilic (Tween® 80) surfactants and co-surfactant by the spontaneous titration method. The developed formulation were characterized, optimized, evaluated and compared for the skin permeation with commercial formulation (fungisome 0.01% w/w). Optimized formulations loaded with amphotericin B were screened using varied concentrations of surfactants and co-surfactants as decided by the ternary phase diagram.

Results and discussion: The maximum % transmittance obtained were 96.9?±?1.0%, 95.9?±?3.0% and 93.7?±?1.2% for the optimized formulations F-I, F-III and F-VI, respectively. These optimized nanoemulsions were subjected to thermodynamic stability study to get the most stable nanoemulsions (F-I). The results of the particle size and zeta potential value were found to be 67.32?±?0.8 nm and –3.7?±?1.2?mV for the final optimized nanoemulsion F-I supporting transparency and stable nanoemulsion for better skin permeation. The steady state transdermal flux for the formulations was observed between 5.89?±?2.06 and 18.02?±?4.3?µg/cm²/h whereas the maximum enhancement ratio were found 1.85- and 3.0-fold higher than fungisome and drug solution, respectively, for F-I. The results of the skin deposition study suggests that 231.37?±?3.6?µg/cm² drug deposited from optimized nanoemulsion F-I and 2.11-fold higher enhancement ratio as compared to fungisome. Optimized surfactants and co-surfactant combination-mediated transport of the drug through the skin was also tried and the results were shown to have facilitated drug permeation and skin perturbation (SEM).

Conclusion: The combined results suggested that amphotericin B nanoemulsion could be a better option for localized topical drug delivery and have greater potential as an effective, efficient and safe approach.     

Preparation and in vivo safety evaluations of antileukemic homoharringtonine-loaded PEGylated liposomes

In order to improve the in vivo safety and specific delivery efficiency of the antileukemic homoharringtonine (HHT) at the targets, the long-circulating PEGylated liposomes loaded with HHT (LCLipo-HHT) were prepared. Their physical characteristics, in vitro drug release, in vivo pharmacokinetic properties and elementary toxicity were evaluated. The mean diameter of the prepared LCLipo-HHT is 75.6?±?3.2?nm and the zeta potential is ?16.9?±?2.5?mV. The entrapment efficiency of HHT in the liposomes is 69.5?±?1.7%. In pharmacokinetic experiments, an increased plasma concentration as well as blood circulation time was obtained when distearoyl phosphoethanolamine-PEG 2000 lipid was added in the formulation, which results in enhancing drug delivery efficiency. Hemolysis test, vascular irritation test and acute toxicity test were used to demonstrate toxicity of LCLipo-HHT. Compared with clinical HHT injection dosage, LCLipo-HHT indicated no vascular irritation, good hemocompatibility, as well as much better safety. Therefore, the prepared LCLipo-HHT can be used as a promising anticancer formulation for antileukemic therapy in the future.     

Preparation and evaluation of a timolol maleate drug–resin ophthalmic suspension as a sustained-release formulation in vitro and in vivo

Abstract

The aim of this work was to assess the performance of resin as an ocular delivery system. Timolol maleate (TM) was chosen as the model drug and an ion exchange resin (IER) as the carrier. The drug–resin complex was prepared using an oscillation method and then characterized regarding particle size, zeta potential, morphology, and drug content. After in vitro drug release study and corneal permeation study were performed, in vivo studies were performed in New Zealand albino rabbits using a suspension with particles sized 4.8?±?1.2?μm and drug loading at 43.00?±?0.09 %. The results indicate that drug released from the drug–resin ophthalmic suspension permeated the cornea and displayed a sustained-release behavior. Drug levels in the ocular tissues after administration of the drug–resin ophthalmic suspension were significantly higher than after treatment with an eye drop formulation but were lower in body tissues and in the plasma. In conclusion, resins have great potential as effective ocular drug delivery carriers to increase ocular bioavailability of timolol while simultaneously reducing systemic drug absorption.     

Mechanism of enhanced oral absorption of akebia saponin D by a self-nanoemulsifying drug delivery system loaded with phospholipid complex

Akebia saponin D (ASD) exhibits a variety of pharmacological activities, such as anti-osteoporosis, neuroprotection, hepatoprotection, but has poor oral bioavailability. A self-nanoemulsifying drug delivery system loaded with akebia saponin D - phospholipid complex (APC-SNEDDS) (composition: Peceol: Cremophor^® EL: Transcutol HP: ASD: phospholipid; ratio: 10:45:45:51:12.3, w:w:w:w:w) was first developed to improve the oral absorption of saponins and it was found to significantly enhance ASD’s oral bioavailability by 4.3 - fold (p?<?.01). This study was conducted to elucidate the mechanism of enhanced oral absorption of ASD by the drug delivery system of APC-SNEDDS. The aggregation morphology and particle size of ASD and APC-SNEDDS prepared in aqueous solutions were determined by transmission electron microscope and particle size analyzer, respectively. Stability of ASD and APC-SNEDDS in gastrointestinal luminal contents and mucosa homogenates were also explored. The differences of in situ intestinal permeability of ASD and APC-SNEDDS were compared. APC-SNEDDS reduced the aggregation size from 389?±?7?nm (ASD) to 148?±?3?nm (APC-SNEDDS). APC-SNEDDS increased the remaining drug in large intestine luminal contents from 47?±?1% (ASD) to 83?±?1% (APC-SNEDDS) during 4?h incubation. APC-SNEDDS provided an 11-fold increase in Ka value and an 11-fold increase in P_eff value compared to ASD. In summary, APC-SNEDDS improved ASD’s oral bioavailability mainly by increasing membrane permeability, destroying self-micelles and inhibiting the intestinal metabolism.     

Development and evaluation of nanosized niosomal dispersion for oral delivery of Ganciclovir

Encapsulation of Ganciclovir in lipophilic vesicular structure may be expected to enhance the oral absorption and prolong the existence of the drug in the systemic circulation. So the purpose of the present study was to improve the oral bioavailability of Ganciclovir by preparing nanosized niosomal dispersion. Niosomes were prepared from Span40, Span60, and Cholesterol in the molar ratio of 1:1, 2:1, 3:1, and 3:2 using reverse evaporation method. The developed niosomal dispersions were characterized for entrapment efficiency, size, shape, in vitro drug release, release kinetic study, and in vivo performance. Optimized formulation (NG8; Span60:Cholesterol 3:2 molar ratio) has shown a significantly high encapsulation of Ganciclovir (89?±?2.13%) with vesicle size of 144?±?3.47?nm (polydispersity index [PDI]?=?0.08). The in vitro release study signifies sustained release profile of niosomal dispersions. Release profile of prepared formulations have shown that more than 85.2?±?0.015% drug was released in 24?h with zero-order release kinetics. The results obtained also revealed that the types of surfactant and Cholesterol content ratio altered the entrapment efficiency, size, and drug release rate from niosomes. In vivo study on rats reveals five-time increment in bioavailability of Ganciclovir after oral administration of optimized formulation (NG8) as compared with tablet. The effective drug concentration (>0.69 µg/mL in plasma) was also maintained for at least 8?h on administration of the niosomal formulation. In conclusion, niosomes can be proposed as a potential oral delivery system for the effective delivery of Ganciclovir.     

Nanoethosomal formulation of gammaoryzanol for skin-aging protection and wrinkle improvement: a histopathological study

Background: Free radical scavengers and antioxidants, with the main focus on enhanced targeting to the skin layers, can provide protection against skin ageing.

Objective: The aim of the present study was to prepare nanoethosomal formulation of gammaoryzanol (GO), a water insoluble antioxidant, for its dermal delivery to prevent skin aging.

Methods: Nanoethosomal formulation was prepared by a modified ethanol injection method and characterized by using laser light scattering, scanning electronic microscope (SEM) and X-ray diffraction (XRD) techniques. The effects of formulation parameters on nanoparticle size, encapsulation efficiency percent (EE%) and loading capacity percent (LC%) were investigated. Antioxidant activity of GO-loaded formulation was investigated in vitro using normal African green monkey kidney fibroblast cells (Vero). The effect of control and GO-loaded nanoethosomal formulation on superoxide dismutase (SOD) and malondialdehyde (MDA) content of rat skin was also probed. Furthermore, the effect of GO-loaded nanoethosomes on skin wrinkle improvement was studied by dermoscopic and histological examination on healthy humans and UV-irradiated rats, respectively.

Results: The optimized nanoethosomal formulation showed promising characteristics including narrow size distribution 0.17?±?0.02, mean diameter of 98.9?±?0.05?nm, EE% of 97.12?±?3.62%, LC% of 13.87?±?1.36% and zeta potential value of –15.1?±?0.9?mV. The XRD results confirmed uniform drug dispersion in the nanoethosomes structure. In vitro and in vivo antioxidant studies confirmed the superior antioxidant effect of GO-loaded nanoethosomal formulation compared with control groups (blank nanoethosomes and GO suspension).

Conclusions: Nanoethosomes was a promising carrier for dermal delivery of GO and consequently had superior anti-aging effect.     

Enhanced oral delivery and anti-gastroesophageal reflux activity of curcumin by binary mixed micelles

The aim of this study was to improve the solubility, oral bioavailability, and anti-gastroesophageal reflux activity of curcumin (CM) by preparing two CM-loaded, novel, binary mixed micelles (CM-M). The two CM-M were prepared by ethanol thin-film hydration method. One (CM-T) was prepared using D-alpha-tocopheryl polyethylene glycol 1000 succinate and Solutol^®HS15, and the other (CM-F) was prepared using Pluronic^®F127 and Solutol^®HS15. The entrapment efficiency and drug loading of CM-T were 83.61?±?0.54% and 2.20?±?0.65%, respectively, which were lower than those of CM-F (88.66?±?0.12% and 1.47?±?0.26%, respectively). TEM results demonstrated that CM-T and CM-F were homogeneous and spherical. The permeability of CM delivered via CM-T and CM-F was enhanced across a Caco-2 cell monolayer, and CM-T and CM-F showed a 5.24- and 4.76-fold increase in relative oral bioavailability, respectively compared with free CM. In addition, the in vivo anti-gastroesophageal reflux study showed that CM-T and CM-F achieved higher anti-gastroesophageal reflux efficacy compared with free CM. Collectively, these findings were indicative of an oral micelle formulation of CM with increased solubility, oral bioavailability, and anti-gastroesophageal reflux activity.     

Process,optimization, and characterization of budesonide-loaded nanostructured lipid carriers for the treatment of inflammatory bowel disease

The major challenge involved in the treatment of inflammatory bowel disease is targeted delivery of the drug at the site of inflammation. As nanoparticles possess the ability to accumulate at the site of inflammation, present investigation aims at development of Budesonide-loaded nanostructured lipid carrier systems (BDS-NLCs) for the treatment of inflammatory bowel disease. BDS-NLCs were prepared by employing a high pressure homogenization technique. Various preliminary trials were performed for optimization of the NLCs in which different processes, as well as formulation parameters, were studied. The BDS-NLCs was optimized statistically by applying a 3-factor/3-level Box–Behnken design. Drug concentration, surfactant concentration, and emulsifier concentration were selected as independent variables, and % entrapment efficiency and particle size were selected as dependent variables. The best batch comprises of 10%, 7%, and 20% w/w concentration of drug, surfactant, and emulsifier, respectively, with % entrapment efficiency of 92.66?±?3.42% and particle size of 284.0?±?4.53?nm. Further, in order to achieve effective delivery of nanoparticulate system to colonic region, the developed BDS-NLCs were encapsulated in Eudragit^® S100-coated pellets. The drug release studies of pellets depict intactness of BDS-NLCs during palletization process, with f₂ value of 75.879. The in vitro evaluation of enteric-coated pellets revealed that a coating level of 15% weight gain is needed in order to impart lag time of 5?h (transit time to reach colon). The results of the study demonstrate that the developed BDS-NLCs could be used as a promising tool for the treatment of inflammatory bowel disease.     

Development and pharmacokinetic evaluation of alginate-pectin polymeric rafts forming tablets using box behnken design

Abstract

Raft is an emerging drug delivery system, which is suitable for controlled release drug delivery and targeting. The present study aimed to evaluate the physico-chemical properties of raft, in vitro release of pantoprazole sodium sesquihydrate and conduct bioavailability studies. Box behnken design was used with three independent and dependent variables. Independent variables were sodium alginate (X₁), pectin (X₂) and hydroxypropyl methyl cellulose K100M (X₃) while dependent variables were percentage drug release at 2 (Y₂), 4 (Y₄) and 8?h (Y₈). The developed rafts were evaluated by their physical and chemical properties. Fourier transform infrared spectroscopy and differential scanning calorimetry were used to study the chemical interaction and thermal behaviour of drug with polymers. Alginate and pectin contents of R9 formulation were 99.28% and 97.29%, respectively, and acid neutralization capacity was 8.0. R9 formulation showed longer duration of neutralization and nature of raft was absorbent. The raft of R9 formulation showed 98.94% release of PSS at 8?h in simulated gastric fluid. Fourier transform infrared spectroscopy showed no chemical interaction and differential scanning calorimetry indicated endothermic peaks at 250?°C for pantoprazole sodium sesquihydrate. t_max for the test and reference formulations were 8?±?2.345?h and 8?±?2.305?h, respectively. C_max of test and reference formulations were 46.026?±?0.567?µg/mL and 43.026?±?0.567?µg/mL, respectively. AUC_(0-t) of the test and reference formulations were 472.115?±?3.467?µg?×?h/mL and 456.105?±?2.017?µg?×?h/mL, respectively. Raft forming system successfully delivered the drug in controlled manner and improved the bioavailability of drugs.     

Preparation and evaluation of self-assembly Soluplus®-sodium cholate-phospholipid ternary mixed micelles of docetaxel

Abstract

Ternary mixed micelles constituted of Soluplus^®, sodium cholate, and phospholipid were prepared as nano-delivery system of the anticancer drug, docetaxel. The formulation of docetaxel-loaded ternary mixed micelles (DTX-TMMs) with an optimized composition (Soluplus^®/sodium cholate/phospholipid= 3:2:1 by weight) were obtained. The main particle size of DTX-TMMs was 76.36?±?2.45?nm, polydispersity index (PDI) was 0.138?±?0.039, and the zeta potential was ?8.46?±?0.55?mv. The encapsulation efficiency was 94.24?±?4.30% and the drug loading was 1.25%. The critical micelle concentration value was used to assess the ability of carrier materials to form micelles. The results indicated that the addition of Soluplus^® to sodium cholate-phospholipid mixed micelles could reduce the critical micelle concentration and improve the stability. In vitro release studies demonstrated that compared with DTX-Injection group, the DTX-TMMs presented a controlled release property of drugs. In vivo pharmacodynamics results suggested that DTX-TMMs had the most effective inhibitory effect on tumor proliferation and had good biosafety. In addition, the relative bioavailability of mixed micelles was increased by 1.36 times compared with the DTX-Injection in vivo pharmacokinetic study indicated that a better therapeutic effect could be achieved. In summary, the ternary mixed micelles prepared in this study are considered to be promising anticancer drug delivery systems.     

Lysozyme-loaded lipid-polymer hybrid nanoparticles: preparation,characterization and colloidal stability evaluation

Context: Lipid-polymer hybrid nanoparticles (LPNPs) are polymeric nanoparticles enveloped by lipid layers, which have emerged as a potent therapeutic nanocarrier alternative to liposomes and polymeric nanoparticles.

Objective: The aim of this work was to develop, characterize and evaluate LPNPs to deliver a model protein, lysozyme.

Materials and methods: Lysozyme-loaded LPNPs were prepared by using the modified w/o/w double-emulsion-solvent-evaporation method. Poly-?-caprolactone (PCL) was used as polymeric core material and tripalmitin:lechitin mixture was used to form a lipid shell around the LPNPs. LPNPs were evaluated for particle size distribution, zeta potential, morphology, encapsulation efficiency, in vitro drug release, stability and cytotoxicity.

Results: The DLS measurement results showed that the particle size of LPNPs ranged from 58.04?±?1.95?nm to 2009.00?±?0.52?nm. The AFM and TEM images of LPNPs demonstrate that LPNPs are spherical in shape. The protein-loading capacity of LPNPs ranged from 5.81% to 60.32%, depending on the formulation parameters. LPNPs displayed a biphasic drug release pattern with a burst release within 1?h, followed by sustained release afterward. Colloidal stability results of LPNPs in different media showed that particle size and zeta potential values of particles did not change significantly in all media except of FBS 100% for 120?h. Finally, the results of a cellular uptake study showed that LPNPs were significantly taken up by 83.3% in L929 cells.

Conclusion: We concluded that the LPNPs prepared with PCL as polymeric core material and tripalmitin:lechitin mixture as lipid shell should be a promising choice for protein delivery.     

Hyperoside nanocrystals for HBV treatment: process optimization,in vitro and in vivo evaluation

The aim of this study was to develop hyperoside (Hyp) nanocrystals to enhance its dissolution rate, oral bioavailability and anti-HBV activity. Hyp nanocrystals were prepared using high pressure homogenization technique followed by lyophilization. A Box–Behnken design approach was employed for process optimization. The physicochemical properties, pharmacokinetics and anti-HBV activity in vivo of Hyp nanocrystal prepared with the optimized formulation were systematically investigated. Hyp nanocrystals prepared with the optimized formulation was found to be rod shaped with particle size of 384?±?21?nm and PDI of 0.172?±?0.027. XRPD studies suggested slight crystalline change in drug. Dissolution rate obtained from Hyp nanocrystals were markedly higher than pure Hyp. The nanocrystals exhibited enhanced C_max (7.42?±?0.73 versus 3.80?±?0.66?mg/L) and AUC_0???t (193.61?±?16.30 versus 91.92?±?17.95?mg·h/L) with a 210.63% increase in relative bioavailability. Hyp nanocrystals exhibited significantly greater anti-HBV activity than Hyp. These results suggested that the developed nanocrystals formulation had a great potential as a viable approach to enhance the bioavailability of Hyp.