共查询到20条相似文献,搜索用时 187 毫秒
1.
如何有效的集成产品数据管理(PDM)和企业资源计划(ERP)是现代企业,尤其是制造企业必须面对的问题。本文从产品数据管理和企业资源计划的概念出发.分别介绍了的PDM和ERP概念、差异、集成的必要性以及集成的途径。 相似文献
2.
基于传热学和金属切削理论,建立了某型高速钻头温度场模型.利用有限元法,模拟该钻头在典型工况的温度场分布及变化规律,研究了切削速度等参数对温度场的影响,得到了钻头在温度载荷下的应力和变形,计算结果表明,高速钻削最高温度出现在钻头尖部,沿轴向逐渐降低,对于小直径钻头心部与表面温差不显著;最高温度随着转速升高而升高,达到一定值后上升趋势逐渐变缓进而下降;刀具热变形较小,但热变形量可能会影响加工精度,应调整刀具材料或加强冷却;切削温度基本不影响其强度. 相似文献
3.
4.
5.
介绍了一种光学玻璃块滚筒式自动称重分拣机.该分拣机采用差动测量原理,动态跟踪秤盘空盘重量,消除了电子天平漂移对称重的影响.分拣机由机械部分和控制系统组成,机械部分包括上料装置、称重装置和分选装置;控制系统包括硬件和系统软件两部分.控制系统硬件由PLC和工控机等组成,PLC完成分拣机动作控制,工控机完成称重数据采集和处理,工控机软件基于LabVIEW开发完成.实验结果表明:该分拣机测量精度为±0.02g,分拣效率为2s/件,满足了用户的要求. 相似文献
6.
7.
高文萃 《气象水文海洋仪器》2003,(3):50-53
随着电子技术的不断发展,现场总现在日益增长的市场需求和竞争中应运而生。文章浅谈了现场总线的概念,详述了现场总线控制系统的体系结构和特点,介绍了几种最具代表性的现场总线,表述了目前现场总线的发展现状。 相似文献
8.
吴江贤 《江苏机械制造与自动化》2007,36(6):154-155
介绍了可编程序控制器(PLC)在直线式悬臂电镀自动控制中的应用;阐述了直线式悬臂电镀自动控制系统的组成和工作原理;叙述了PLC与触摸屏结合的控制方式结合直线式电镀自动控制系统的特点。从车间层面上分析并设计了系统的网络结构,就设备级的控制进行深入的研究,在硬件和软件两个层面上对生产线的控制进行了设计,最后对于系统的可靠性进行了设计。实际运行情况表明,系统运行稳定,能够满足生产的工艺要求。 相似文献
9.
H Haug 《Microscopica acta》1979,82(2):147-161
The procedure of a stereological investigation of the cytoarchitectonics in the cerebral cortex is described. The number of all cells and--in order to obtain a size-distribution--the area of nerve-cells are measured with the help of an optomanual system (MOP-AM). The values and the distance of the evaluation-field from the cortical surface are transferred to a magnetic-tape. The principle of the arrangement of the fields has been described in Microscopica Acta, Vol. 71. The actual results including their statistics are calculated with a table-computer by using stereological formulas and by considering the magnification and the shrinkage of embedding. The measurement of the latter is also mentioned. The results can be printed in the form of various tables for lines, superlines, layers and the whole cortex and in the form of a newly developed computer-graph. The latter demonstrates the size-distribution of the nerve-cells and their dependence on the distance of the cortical surface. The task of our present study--the aging of the human cortex cerebri--is briefly given. 相似文献
10.
基于C51防汽车追尾报警系统的研究 总被引:1,自引:0,他引:1
孙泽刚 《机电产品开发与创新》2010,23(6):116-118
随着社会经济的发展交通拥挤状况日趋严重,在汽车高速行驶过程中由于汽车故障引起的撞车事件屡屡发生,针对这种情况,设计一种响应快,可靠性高且较为经济的汽车防撞预警系统势在必行。汽车防撞系统是一种可向司机预先发出警告信号的报警装置。该系统启动后可在自身发生故障后向邻近汽车报警及可接收邻近汽车的报警信号,以便司机采取相应的措施应付险情。本设计主要是通过检测安装在汽车各个关键部位的传感器传来的信号来判断汽车的状况,如有问题则通过基于VD5026和VD5027芯片设计的发射和接收电路来通知或获取邻近汽车的险情。报警采用基于ISD2560的语音报警电路,主控机采用89C51。该系统设计经济实惠,对汽车行驶的安全提供了保障。 相似文献
11.
12.
13.
This work describes the morphology and histology of the P. argentinus digestive tract. The foregut comprises the mouth, oesophagus, and stomach and is lined by a simple cylindrical epithelium overlain by cuticle. There are tegumental glands in the oral region and in the first portion of the oesophagus and of the hindgut. The cardiac stomach is an oval dorsal sac in the cephalothorax and has no calcified structures. The pyloric stomach comprises an upper chamber and a lower gland filter. The filter consists of an outer row of elongated setae and an inner row of dorsally curved setae forming longitudinal channels 16-18 microm wide. The midgut runs from the dorsal chamber of the pyloric stomach to the sixth abdominal somite without caeca. The hindgut runs from the sixth abdominal somite to the ventral anus. The mid-gut epithelium comprises dominant cylindrical cells and small undifferentiated cells in the first portion. The hindgut wall presents longitudinal folds, conspicuous muscular bundles, and a folded cuticle. The digestive tract of P. argentinus is basically similar to that of most of decapods. The absence of calcified structures in the stomach and the width of the longitudinal channels in the filter are related to the predominantly detritivorous diet. 相似文献
14.
前缘弯掠(扭)斜流转子的设计与研究 总被引:1,自引:0,他引:1
在常规斜流转子设计方法的基础上,应用1/7湍流边界层理论和假想等价速度三角形设计了前缘弯掠(扭)斜流转子,详细讨论了前缘弯掠(扭)斜流转子的设计方法。试验与内流分析结果表明,对常规斜流转子进行前弯设计后,能有效改善低流量时的旋转失速状态,扩大了喘振裕度和工作范围,减弱转子下游的尾迹。 相似文献
15.
Wei Wu Shihua Yuan Jibin Hu Chongbo Jing 《Frontiers of Mechanical Engineering in China》2009,4(4):371-378
The operating characteristics of a single piston hydraulic free piston diesel engine differ significantly from conventional
diesel engines and this provides a theoretical basis for controlling and optimizing the design of the engine. The design of
the proposed engine intended as a power supply for a hydraulic propulsion vehicle is presented. An engine performance forecast
model was generated in AMESim. The performance of the prototype engine is predicted and the predictive results are verified
with experiments. The particular features of the engine are discussed. The dynamic characteristics of the prototype engine
are analyzed and the results indicate the rationality and feasibility of the engine design parameters. The features of the
controllable working frequency and the intermittence output flows are provided. The flow capacity characteristics of the hydraulic
valves on the prototype engine are offered. The methods for starting and the operation after misfire are presented. 相似文献
16.
《流体机械》2016,(8)
为了得到胶乳分离机高速转鼓在离心力场作用下的内部流场规律,建立胶乳物理特征、转鼓结构及转速与流场压力、速度之间的相互关系。基于FLUENT软件,对仿真建模、边界条件设置、计算方法进行了研究;选择混合多相流和层流模型,利用转鼓流场二维模型对内部流场进行了数值模拟,分析得到了流场的压力云图、速度云图以及出流区速度矢量图,定量评价了不同转速下流场压力、速度的变化,提出了一种利用特征参数验证模型的方法。分析结果表明:转鼓内流体压力、速度与流体所处半径成正比,流体速度、压力分别与转鼓转速呈一次、二次正比例关系,在工作转速下最大液体压力为10.4 MPa,重相出流区比轻相出流区存在更明显的漩涡现象,碟片间隙内液体流动状态为层流,仿真结果与理论计算值、文献压力数据及特征参数实测值较一致,验证了分析模型和分析方法的有效性。本研究为胶乳离心分离工艺、转鼓流场及结构优化提供了理论依据和分析方法。 相似文献
17.
18.
19.
基于轨道振动理论的梯形轨枕轨道钢轨波磨研究* 总被引:6,自引:0,他引:6
研究半径为350 m梯形轨枕曲线轨道上波磨的成因。借助于现场观察和测量,获得波磨的特征参数。调查区段车辆运行速度在35 km/h左右,该波磨的主波长为60~100 mm,其通过频率为110~180 Hz;次波长为30 mm,其通过频率为324 Hz。结合轨道结构振动理论对波磨成因进行预测分析。根据结构特征建立梯形轨枕轨道三维有限元实体模型,利用此模型分析轨道结构的固有特性与波磨通过频率的内在联系,对波磨的成因做出初步解释,利用该模型计算分析白噪声激励下轨道结构的频响特性,进一步揭示波磨形成的机理。将理论计算结果与现场测试数据比较,两者相吻合。研究表明,车辆通过梯形轨枕轨道时,容易引起钢轨相对于轨枕的垂横向弯曲振动,从而加剧轮轨粘滑振动,加速了该轨道曲线段波磨的形成和发展。 相似文献