Effect of gasification agent on the performance of solid oxide fuel cell and biomass gasification systems

In this paper, an integrated solid oxide fuel cell (SOFC) and biomass gasification system is modeled to study the effect of gasification agent (air, enriched oxygen and steam) on its performance. In the present modeling, a heat transfer model for SOFC and thermodynamic models for the rest of the components are used. In addition, exergy balances are written for the system components. The results show that using steam as the gasification agent yields the highest electrical efficiency (41.8%), power-to-heat ratio (4.649), and exergetic efficiency (39.1%), but the lowest fuel utilization efficiency (50.8%). In addition, the exergy destruction is found to be the highest at the gasifier for the air and enriched oxygen gasification cases and the heat exchanger that supplies heat to the air entering the SOFC for the steam gasification case.     

Gas turbine steam injection and combined power cycles using fog inlet cooling and biomass fuel: A thermodynamic assessment

The results of energy and exergy analyses of two biomass integrated steam injection cycles and combined power cycles are reported. Fog cooling, steam injection and adding steam turbine cycles to gas turbine cycles can enhance the performance of power generation systems. Even with its lower heat value, biomass can be substituted for fossil fuels. The performances of the cycles are assessed under the same conditions. The assessments show that the combined cycle has a higher efficiency at lower values of compressor pressure ratio but the steam injection plant is advantageous at higher pressure ratio values. The steam injection plant has a higher net power under the same conditions, while the exergy loss rate is higher for the combined cycle at all pressure ratios. But the exergy destruction rate is higher for the steam injection cycle at lower compressor pressure ratios, and for the combined cycle at higher pressure ratios.     

Energy and exergy analysis and optimization of biomass gasification process for hydrogen production (based on air,steam and air/steam gasifying agents)

Growing the consumption of fossil fuels and emerging global warming issue have driven the research interests toward renewable and environmentally friendly energy sources. Biomass gasification is identified as an efficient technology to produce sustainable hydrogen. In this work, energy and exergy analysis coupled with thermodynamic equilibrium model were implemented in biomass gasification process for production of hydrogen. In this regard, a detailed comparison of the performance of a downdraft gasifier was implemented using air, steam, and air/steam as the gasifying agents for horse manure, pinewood and sawdust as the biomass materials. The comparison results indicate that the steam gasification of pinewood generates a more desired product gas compositions with a much higher hydrogen exergy efficiency and low exergy values of unreacted carbon and irreversibility. Then the effects of the inherent operating factors were investigated and optimized applying a response surface methodology to maximize hydrogen exergy efficiency of the process. A hydrogen exergy efficiency of 44% was obtained when the product gas exergy efficiency reaches to the highest value (88.26%) and destruction and unreacted carbon efficiencies exhibit minimum values of 7.96% and 1.9%.     

Study on biomass gasification under various operating conditions

An Aspen Plus model of biomass gasification with different gasifying agents has been developed. Due to lack of kinetic data, the developed model is based on Gibbs free energy minimization. The main objective of this study is to study the influence of gasifying agent (pure oxygen; oxygen-enriched air and air), gasification temperature and equivalence ratio (ER) on gas composition, gas lower heating value (LHV), and energy/exergy efficiencies. The developed model was validated with experimental data which was found to be in well agreement. Increase in gasification temperature led to a significant increase in H₂ content. On the other hand, an increase in ER led to a significant reduction in H₂, CO, and CH₄ and a significant increase in CO₂. Also, a gradual downward trend of exergy efficiency (EE) was found, as ER increased from 0.15 to 0.21, while it basically kept constant as the gasification temperature was varied.     

Energy,exergy and exergo-environmental impact assessment of a solid oxide fuel cell coupled with absorption chiller & cascaded closed loop ORC for multi-generation

A novel solid oxide fuel cell (SOFC) multigeneration system fueled by biogas derived from agricultural waste (maize silage) is designed and analyzed from the view point of energy and exergy analysis. The system is proposed in order to limit the greenhouse gas emissions as it uses a renewable energy source as a fuel. Electricity, domestic hot water, hydrogen and cooling load are produced simultaneously by the system. The system includes a solid oxide fuel cell; which is the primary mover, a biogas digester subsystem, a cascaded closed loop organic Rankine cycle, a single effect LiBr-water absorption refrigeration cycle, and a proton exchange membrane electrolyzer subsystem. The proposed cascaded closed-loop ORC cycle is considered as one of the advanced heat recovery technologies that significantly improve thermal efficiency of integrated systems. The thermal performance of the proposed system is observed to be higher in comparison to the simple ORC and the recuperated ORC cycles. The integration of a splitter to govern the flue gas separation ratio is also introduced in this study to cater for particular needs/demands. The separation ratio can be used to vary the cooling load or the additional power supplied by the ORC to the system. It is deduced that net electrical power, cooling load, heating capacity of the domestic hot water and total energy and exergy efficiency are 789.7 kW, 317.3 kW, 65.75 kW, 69.86% and 47.4% respectively under integral design conditions. Using a parametric approach, the effects of main parameters on the output of the device are analyzed. Current density is an important parameter for system performance. Increasing the current density leads to increased power produced by the system, decreased exergy efficiency in the system and increased energy efficiency. After-burner, air and fuel heat exchangers are observed to have the highest exergy destruction rates. Lower current density values are desirable for better exergy-based sustainability from the exergetic environmental impact assessment. Higher current density values have negative effect on the environment.     

Development and thermodynamic assessment of a novel solar and biomass energy based integrated plant for liquid hydrogen production

In this paper, a combined power plant based on the dish collector and biomass gasifier has been designed to produce liquefied hydrogen and beneficial outputs. The proposed solar and biomass energy based combined power system consists of seven different subplants, such as solar power process, biomass gasification plant, gas turbine cycle, hydrogen generation and liquefaction system, Kalina cycle, organic Rankine cycle, and single-effect absorption plant with ejector. The main useful outputs from the combined plant include power, liquid hydrogen, heating-cooling, and hot water. To evaluate the efficiency of integrated solar energy plant, energetic and exergetic effectiveness of both the whole plant and the sub-plants are performed. For this solar and biomass gasification based combined plant, the generation rates for useful outputs covering the total electricity, cooling, heating and hydrogen, and hot water are obtained as nearly 3.9 MW, 6584 kW, 4206 kW, and 0.087 kg/s in the base design situations. The energy and exergy performances of the whole system are calculated as 51.93% and 47.14%. Also, the functional exergy of the whole system is calculated as 9.18% for the base working parameters. In addition to calculating thermodynamic efficiencies, a parametric plant is conducted to examine the impacts of reference temperature, solar radiation intensity, gasifier temperature, combustion temperature, compression ratio of Brayton cycle, inlet temperature of separator 2, organic Rankine cycle turbine and pump input temperature, and gas turbine input temperature on the combined plant performance.     

Comparative exergoeconomic analyses of the integration of biomass gasification and a gas turbine power plant with and without fogging inlet cooling

Inlet cooling is effective for mitigating the decrease in gas turbine performance during hot and humid summer periods when electrical power demands peak, and steam injection, using steam raised from the turbine exhaust gases in a heat recovery steam generator, is an effective technique for utilizing the hot turbine exhaust gases. Biomass gasification can be integrated with a gas turbine cycle to provide efficient, clean power generation. In the present paper, a gas turbine cycle with fog cooling and steam injection, and integrated with biomass gasification, is proposed and analyzed with energy, exergy and exergoeconomic analyses. The thermodynamic analyses show that increasing the compressor pressure ratio and the gas turbine inlet temperature raises the energy and exergy efficiencies. On the component level, the gas turbine is determined to have the highest exergy efficiency and the combustor the lowest. The exergoeconomic analysis reveals that the proposed cycle has a lower total unit product cost than a similar plant fired by natural gas. However, the relative cost difference and exergoeconomic factor is higher for the proposed cycle than the natural gas fired plant, indicating that the proposed cycle is more costly for producing electricity despite its lower product cost and environmental impact.     

Conceptual design and analysis of a novel system based on ash agglomerating fluidized bed gasification for co-production of hydrogen and electricity

In this paper, a novel system with ash agglomerating fluidized bed gasification and CO₂ capture to produce hydrogen and electricity is firstly designed in Aspen Plus. The newly-proposed system is composed of eight subsystems, namely air separation unit, gasification unit, water gas shift unit, Rectisol unit, CO₂ compression unit, Claus unit, pressure swing adsorption unit, gas and steam turbine unit. The thermodynamic performance and hydrogen to coal ratio of the new proposed system are investigated. The results demonstrate that the hydrogen to coal ratio, energy efficiency, net electricity power and exergy efficiency of the overall system for Yangcheng anthracite are 0.096 kg/kg, 46.52%, 1.71 MW and 43.92%, respectively. Additionally, the exergy destruction ratio and exergy efficiency of each subsystem are researched. More importantly, the influences of the oxygen to coal ratio, steam to coal ratio and coal types on the hydrogen to coal ratio, energy efficiency and exergy efficiency are also studied.     

Decentralized generation of electricity from biomass with proton exchange membrane fuel cell

Biomass can be applied as the primary source for the production of hydrogen in the future. The biomass is converted in an atmospheric fluidized bed gasification process using steam as the gasifying agent. The producer gas needs further cleaning and processing before the hydrogen can be converted in a fuel cell; it is assumed that the gas cleaning processes are able to meet the requirements for a PEM-FC. The compressed hydrogen is supplied to a hydrogen grid and can be used in small-scale decentralized CHP units. In this study it is assumed that the CHP units are based on low temperature PEM fuel cells. For the evaluation of alternative technologies the whole chain of centralized hydrogen production from biomass up to and including decentralized electricity production in PEM fuel cells is considered.Two models for the production of hydrogen from biomass and three models for the combined production of electricity and heat with PEM fuel cells are built using the computer program Cycle-Tempo. Two different levels of hydrogen purity are considered in this evaluation: 60% and 99.99% pure hydrogen. The purity of the hydrogen affects both the efficiencies of the hydrogen production as well as the PEM-FC systems. The electrical exergy efficiency of the PEM-FC system without additional heat production is calculated to be 27.66% in the case of 60% hydrogen and 29.06% in the case of 99.99% pure hydrogen. The electrical exergy efficiencies of the whole conversion chain appear to be 21.68% and 18.74%, respectively. The high losses during purification of the hydrogen gas result in a higher efficiency for the case with low purity hydrogen. The removal of the last impurities strongly increases the overall exergy losses of the conversion chain.     

Exergy analysis of renewable light olefin production system via biomass gasification and methanol synthesis

The conceptual light olefin production system from biomass via gasification and methanol synthesis was simulated and its thermodynamic performance was evaluated through exergy analysis. The system was made up of gasification, gas composition adjustment, methanol synthesis, light olefin synthesis, steam & power generation and cooling water treatment. The in-depth exergy analysis was performed at the levels of system, subsystem and operation component respectively. The gasifier and the tail gas combustor were the main sources of irreversibility with exergy destruction ratios of 17.0% and 16.8% of the input exergy of biomass. The steam & power generation subsystem accounted for 43.4% of the overall exergy destruction, followed by 41.0% and 5.69% in the subsystems of gasification and gas composition adjustment respectively. The sensitivity evaluation of the operation parameters of gasifier indicates that the system efficiency could be improved by enhancing syngas yield and subsequent yield of light olefins. The overall exergetic efficiency of 30.5% is obtained at the mass ratios of steam to biomass and O₂-rich gas (95 vol%) to biomass (S/B and O/B) of 0.26 and 0.14 and gasification temperature at 725 °C.     

Exergy analysis and multiobjective optimization of a biomass gasification based multigeneration system

Biomass gasification is a process of converting biomass to a combustible gas suitable for use in boilers, engines and turbines to produce combined cooling, heat and power. This paper presents a detailed model of a biomass gasification system and designs a multigeneration energy system which uses the biomass gasification process for generating combined cooling, heat and electricity. Energy and exergy analyses are first applied to evaluate the performance of the designed system. Next, minimizing total cost rate and maximizing exergy efficiency of the system are considered as two objective functions and a multiobjective optimization approach based on differential evolution algorithm and local unimodal sampling technique is developed to calculate the optimal values of the multigeneration system parameters. A parametric study is then carried out and Pareto front curve is used to determine the trend of objective functions and assess the performance of the system. Furthermore, a sensitivity analysis is employed to evaluate effects of design parameters on the objective functions. Simulation results are compared with two other multiobjective optimization algorithms and effectiveness of the proposed method is verified using various performance indicators.     

High efficiency chemical energy conversion system based on a methane catalytic decomposition reaction and two fuel cells. Part II. Exergy analysis

A methane catalytic decomposition reactor-direct carbon fuel cell-internal reforming solid oxide fuel cell (MCDR-DCFC-IRSOFC) energy system is highly efficient for converting the chemical energy of methane into electrical energy. A gas turbine cycle is also used to output more power from the thermal energy generated in the IRSOFC. In part I of this work, models of the fuel cells and the system are proposed and validated. In this part, exergy conservation analysis is carried out based on the developed electrochemical and thermodynamic models. The ratio of the exergy destruction of each unit is examined. The results show that the electrical exergy efficiency of 68.24% is achieved with the system. The possibility of further recovery of the waste heat is discussed and the combined power-heat exergy efficiency is over 80%.     

Thermodynamic analysis of an integrated power generation system driven by solid oxide fuel cell

A new integrated power generation system driven by the solid oxide fuel cell (SOFC) is proposed to improve the conversion efficiency of conventional energy by using a Kalina cycle to recover the waste heat of exhaust from the SOFC-GT. The system using methane as main fuel consists an internal reforming SOFC, an after-burner, a gas turbine, preheaters, compressors and a Kalina cycle. The proposed system is simulated based on the developed mathematical models, and the overall system performance has been evaluated by the first and second law of thermodynamics. Exergy analysis is conducted to indicate the thermodynamic losses in each components. A parametric analysis is also carried out to examine the effects of some key thermodynamic parameters on the system performance. Results indicate that as compressor pressure ratio increases, SOFC electrical efficiency increases and there is an optimal compressor pressure ratio to reach the maximum overall electrical efficiency and exergy efficiency. It is also found that SOFC electrical efficiency, overall electrical efficiency and exergy efficiency can be improved by increasing air flow rate. Also, the largest exergy destruction occurs in the SOFC followed by the after-burner, the waste heat boiler, the gas turbine. The compressor pressure ratio and air flow rate have significant effects on the exergy destruction in some main components of system.     

Fuel cell energy generation and recovery cycle analysis for residential application

Today’s concern regarding limited fossil fuel resources and their contribution to environmental pollution have changed the general trend to utilization of high efficiency power generation facilities like fuel cells. According to annual reducing capital cost of these utilities, their entrance to commercial level is completely expected. Hot exhaust gases of Solid Oxide Fuel Cells (SOFC) are potentially applicable in heat recovery systems. In the present research, a SOFC with the capacity of 215 kW has been combined with a recovery cycle for the sake of simultaneous of electric power, cooling load and domestic hot water demand of a hotel with 4600 m² area. This case study has been evaluated by energy and exergy analysis regarding exergy loss and second law efficiency in each component. The effect of fuel and air flow rate and also current density as controlling parameters of fuel cell performance have been studied and visual software for energy-exergy analysis and parametric study has been developed. At the end, an economic study of simultaneous energy generation and recovery cycle in comparison with common residential power and energy systems has been done. General results show that based on fuel lower heating value, the maximum efficiency of 83 percent for simultaneous energy generation and heat recovery cycle can be achieved. This efficiency is related to typical climate condition of July in the afternoon, while all the electrical energy, cooling load and 40 percent of hot water demand could be provided by this cycle. About 49 percent of input exergy can be efficiently recovered for energy requirements of building. Generator in absorption chiller and SOFC are the most destructive components of exergy in this system.     

Thermodynamic analysis of an LNG fuelled combined cycle power plant with waste heat recovery and utilization system

This paper has proposed an improved liquefied natural gas (LNG) fuelled combined cycle power plant with a waste heat recovery and utilization system. The proposed combined cycle, which provides power outputs and thermal energy, consists of the gas/steam combined cycle, the subsystem utilizing the latent heat of spent steam from the steam turbine to vaporize LNG, the subsystem that recovers both the sensible heat and the latent heat of water vapour in the exhaust gas from the heat recovery steam generator (HRSG) by installing a condensing heat exchanger, and the HRSG waste heat utilization subsystem. The conventional combined cycle and the proposed combined cycle are modelled, considering mass, energy and exergy balances for every component and both energy and exergy analyses are conducted. Parametric analyses are performed for the proposed combined cycle to evaluate the effects of several factors, such as the gas turbine inlet temperature (TIT), the condenser pressure, the pinch point temperature difference of the condensing heat exchanger and the fuel gas heating temperature on the performance of the proposed combined cycle through simulation calculations. The results show that the net electrical efficiency and the exergy efficiency of the proposed combined cycle can be increased by 1.6 and 2.84% than those of the conventional combined cycle, respectively. The heat recovery per kg of flue gas is equal to 86.27 kJ s^?1. One MW of electric power for operating sea water pumps can be saved. The net electrical efficiency and the heat recovery ratio increase as the condenser pressure decreases. The higher heat recovery from the HRSG exit flue gas is achieved at higher gas TIT and at lower pinch point temperature of the condensing heat exchanger. Copyright © 2006 John Wiley & Sons, Ltd.     

Investigation of a multi-generation system using a hybrid steam biomass gasification for hydrogen, power and heat

In this paper, an integrated process of steam biomass gasification and a solid oxide fuel cell (SOFC) is investigated energetically to evaluate both electrical and energy efficiencies. This system is conceptualized as a combined system, based on steam biomass gasification and with a high temperature, pressurized SOFC. The SOFC system uses hydrogen obtained from steam sawdust gasification. Due to the utilization of the hydrogen content of steam in the reforming and shift reaction stages, the system efficiencies reach appreciable levels. This study essentially investigates the utilization of steam biomass gasification derived hydrogen that was produced from an earlier work in a system combines gasifier and SOFC to perform multi-duties (power and heat). A thermodynamic model is developed to explore a combination of steam biomass gasification, which produces 70–75 g of hydrogen/kg of biomass to fuel a planar SOFC, and generate both heat and power. Furthermore, processes are emerged in the system to increase the hydrogen yield by further processing the rest of gasification products: carbon monoxide, methane, char and tar. The conceptualized scheme combines SOFC operates at 1000 K and 1.2 bar and gasifier scheme based on steam biomass gasification which operates close to the atmospheric pressure, a temperature range of 1023–1423 K and a steam-biomass ratio of 0.8 kmol/kmol. A parametric study is also performed to evaluate the effect of various parameters such as hydrogen yield, air flow rate etc. on the system performance. The results show that SOFC with an efficiency of 50.3% operates in a good fit with the steam biomass gasification module with an efficiency, based on hydrogen yield, of 55.3%, and the overall system then works efficiently with an electric efficiency of ∼82%.     

Performance of sorption-enhanced chemical looping gasification system coupled with solid oxide fuel cell using exergy analysis

Coal gasification system integrated with solid oxide fuel cell (SOFC) provides a promising energy conversion way owing to its high efficiency. To get a deep insight into the energy performance of this system, a thermodynamic evaluation is implemented. Meanwhile, the technologies of chemical looping and CO₂ sorption are introduced into this integration system. It is found that the addition of oxygen carrier and sorbent into coal gasification system can promote the output power of the SOFC with a higher exergy destruction, where the exergy efficiency of most modules in the system can reach 80% except tar separation. The results also reveal that a suitable improvement of gasifying agent amount is beneficial to the energy performance of the system. When the H₂O/C molar ratio is increased to 3.0, the SOFC exergy efficiency of 97% can be achieved.     

Energetic and exergetic performance analyses of a combined heat and power plant with absorption inlet cooling and evaporative aftercooling

In this paper, exergy method is applied to analyze the gas turbine cycle cogeneration with inlet air cooling and evaporative aftercooling of the compressor discharge. The exergy destruction rate in each component of cogeneration is evaluated in detail. The effects of some main parameters on the exergy destruction and exergy efficiency of the cycle are investigated. The most significant exergy destruction rates in the cycle are in combustion chamber, heat recovery steam generator and regenerative heat exchanger. The overall pressure ratio and turbine inlet temperature have significant effect on exergy destruction in most of the components of cogeneration. The results obtained from the analysis show that inlet air cooling along with evaporative aftercooling has an obvious increase in the energy and exergy efficiency compared to the basic gas turbine cycle cogeneration. It is further shown that the first-law efficiency, power to heat ratio and exergy efficiency of the cogeneration cycle significantly vary with the change in overall pressure ratio and turbine inlet temperature but the change in process heat pressure shows small variation in these parameters.     

Exergy analysis of two cryogenic air separation processes

Two process designs of a cryogenic ASU (air separation unit) have been evaluated using exergy analysis. The ASU is part of an IGCC (integrated gasification combined cycle); it is supplying oxygen and nitrogen to the gasifier and nitrogen to the gas turbine. The two process designs separate the same feed into products with the same specifications. They differ in the number of distillation columns that are used; either two or three. Addition of the third column reduced the exergy destruction in the distillation section with 31%. Overall, the three-column design destroyed 12% less exergy than the two-column design. The rational exergy efficiency is defined as the desired exergy change divided by the total exergy change; it is 38% for the three-column design and 35% for the two-column design. Almost half of the exergy destruction is located in compressor after-coolers. Using this heat of compression elsewhere in the IGCC can be an important way to increase the IGCC efficiency. It is proposed to use it for the pre-heating of ASU products or for the production of steam, which can be used as part of the steam turbine cycle.     

Thermodynamic methodology to support the selection of feedstocks for decentralised downdraft gasification power plants

Thermodynamic criteria as a feedstock selection tool for decentralised downdraft gasifiers coupled to spark-ignition engines are presented in this work. The methodology consists of an energy and exergy analysis of gasification process. The analysis is carried out by computational modelling of the gasification process as a function of biomass type (ultimate analysis, moisture content and heating value) and fuel/air ratio. Considering a system operating with different wood species, analysed parameters are gas heating value, energy and exergy efficiencies and engine fuel quality (EFQ). With a fixed fuel/air ratio (2.6) and moisture content (20%wt), it is highlighted that as the carbon-oxygen molar ratio of wood decreases from 2.0 to 1.78 as model input, reaction temperature increases by 9%, energy and exergy efficiencies diminish by 1.8% and 4.2%, respectively, while EFQ increases by 3.2%. Therefore, for decentralised power plants, biomass should be selected to produce higher EFQ.