Dual-tuning of de/hydrogenation kinetic properties of Mg-based hydrogen storage alloy by building a Ni-/Co-multi-platform collaborative system

The Mg-based hydrogen storage alloy with multiple platforms is successfully prepared by ball milling Co powder and Mg-RE-Ni precursor alloy, and its hydrogen storage behavior was investigated in detail by XRD, EDS, TEM, PCI, and DSC methods. The ball-milled alloy consists of the main phase Mg, the catalytic phases Mg₂Ni, Mg₂Co as well as a small amount of Mg₁₂Ce, and convert into the MgH₂–CeH_2.73-Mg₂NiH₄–Mg₂CoH₅ composite after hydrogenation. The composite has three PCI platforms corresponding to the reversible de/hydrogenation reaction of Mg/MgH₂, Mg₂Ni/Mg₂NiH₄ and Mg₆Co₂H₁₁/Mg₂CoH₅. Among them, the transformation between Mg₂Ni and Mg₂NiH₄ triggers the “spill-over” effect which promote the decomposition of MgH₂ phases and enhances the hydrogen desorption kinetics. Meanwhile, the conversion of the Mg₆Co₂H₁₁ to Mg₂CoH₅ phase induces the “chain reaction” effect, which leads to preferential nucleation of Mg phase and improves the hydrogen absorption kinetics. Therefore, the Mg-RE-Ni-Co alloy has a double improvement on hydrogen absorption and desorption kinetics. Concretely, the alloy has an optimal hydrogen absorption temperature of 200 °C, at which it can absorb 5.5 wt. % H₂ within 40 s. Under the conditions, the capacity of absorption almost reaches the maximum reversible value (about 5.6 wt. %). Besides, the alloy has a dehydrogenation activation energy of 67.9 kJ/mol and can desorb 5.0 wt. % H₂ within 60 min at the temperature of 260 °C.     

Effective synthesis of Mg2CoH5 by reactive mechanical milling and its hydrogen sorption behavior after cycling

Mg₂CoH₅ was synthesized by reactive mechanical milling (RMM) under hydrogen atmosphere (0.5 MPa) from 2MgH₂–Co and 3MgH₂–Co mixtures, with a yield >80%. The microstructure, structure and thermal behavior of the phases formed during the processing were investigated by transmission electron microscopy, X-ray diffraction and differential scanning calorimetry. Kinetic properties of the reaction with hydrogen of the 2MgH₂–Co and 3MgH₂–Co mixtures after RMM were evaluated using modified Sieverts-type equipment. The 3MgH₂–Co mixture showed better properties for storage applications, with its highest rate of hydrogen absorption and desorption at 300 °C, its storage capacity of about 3.7 wt% in less than 100 s, and good stability after cycling. Although the starting material presents Mg₂CoH₅ as majority phase, the cycling leads to disproportion between Mg and Co. We obtained a mixture of Mg₂CoH₅, Mg₆Co₂H₁₁ and MgH₂ hydrides, as well as other phases such as Co and/or Mg, depending on experimental conditions.     

Interfacial engineering of nickel/vanadium based two-dimensional layered double hydroxide for solid-state hydrogen storage in MgH2

As a high-density solid-state hydrogen storage material, magnesium hydride (MgH₂) is promising for hydrogen transportation and storage. Yet, its stable thermodynamics and sluggish kinetics are unfavorable for that required for commercial application. Herein, nickel/vanadium trioxide (Ni/V₂O₃) nanoparticles with heterostructures were successfully prepared via hydrogenating the NiV-based two-dimensional layered double hydroxide (NiV-LDH). MgH₂ + 7 wt% Ni/V₂O₃ presented more superior hydrogen absorption and desorption performances than pure MgH₂ and MgH₂ + 7 wt% NiV-LDH. The initial discharging temperature of MgH₂ was significantly reduced to 190 °C after adding 7 wt% Ni/V₂O₃, which was 22 and 128 °C lower than that of 7 wt% NiV-LDH modified MgH₂ and additive-free MgH₂, respectively. The completely dehydrogenated MgH₂ + 7 wt% Ni/V₂O₃ charged 5.25 wt% H₂ in 20 min at 125 °C, while the hydrogen absorption capacity of pure MgH₂ only amounted to 4.82 wt% H₂ at a higher temperature of 200 °C for a longer time of 60 min. Moreover, compared with MgH₂ + 7 wt% NiV-LDH, MgH₂ + 7 wt% Ni/V₂O₃ shows better cycling performance. The microstructure analysis indicated the heterostructural Ni/V₂O₃ nanoparticles were uniformly distributed. Mg₂Ni/Mg₂NiH₄ and metallic V were formed in-situ during cycling, which synergistically tuned the hydrogen storage process in MgH₂. Our work presents a facile interfacial engineering method to enhance the catalytic activity by constructing a heterostructure, which may provide the mentality of designing efficient catalysts for hydrogen storage.     

Enhancing hydrogen storage performance of MgH2 through the addition of BaMnO3 synthesized via solid-state method

Currently, magnesium hydride (MgH₂) as a solid-state hydrogen storage material has become the subject of major research owing to its good reversibility, large hydrogen storage capacity (7.6 wt%) and affordability. However, MgH₂ has a high decomposition temperature (>400 °C) and slow desorption and absorption kinetics. In this work, BaMnO₃ was synthesized using the solid-state method and was used as an additive to overcome the drawbacks of MgH₂. Interestingly, after adding 10 wt% of BaMnO₃, the initial desorption temperature of MgH₂ decreased to 282 °C, which was 138 °C lower than that of pure MgH₂ and 61 °C lower than that of milled MgH₂. For absorption kinetics, at 250 °C in 2 min, 10 wt% of BaMnO₃-doped MgH₂ absorbed 5.22 wt% of H₂ compared to milled MgH₂ (3.48 wt%). Conversely, the desorption kinetics also demonstrated that 10 wt% of BaMnO₃-doped MgH₂ samples desorbed 5.36 wt% of H₂ at 300 °C within 1 h whereas milled MgH₂ only released less than 0.32 wt% of H₂. The activation energy was lowered by 45 kJ/mol compared to that of MgH₂ after the addition of 10 wt% of BaMnO₃. Further analyzed by using XRD revealed that the formation of Mg_0·9Mn_0·1O, Mn₃O₄ and Ba or Ba-containing enhanced the performance of MgH₂.     

Catalysis derived from flower-like Ni MOF towards the hydrogen storage performance of magnesium hydride

Herein, a novel flower-like Ni MOF with good thermostability is introduced into MgH₂ for the first time, and which demonstrates excellent catalytic activity on improving hydrogen storage performance of MgH₂. The peak dehydrogenation temperature of MgH₂-5 wt.% Ni MOF is 78 °C lower than that of pure MgH₂. Besides, MgH₂-5 wt.% Ni MOF shows faster de/hydrogenation kinetics, releasing 6.4 wt% hydrogen at 300 °C within 600 s and restoring about 5.7 wt% hydrogen at 150 °C after dehydrogenation. The apparent activation energy for de/hydrogenation reactions are calculated to be 107.8 and 42.8 kJ/mol H₂ respectively, which are much lower than that of MgH₂ doped with other MOFs. In addition, the catalytic mechanism of flower-like Ni MOF is investigated in depth, through XRD, XPS and TEM methods. The high catalytic activity of flower-like Ni MOF can be attributed to the combining effect of in-situ generated Mg₂Ni/Mg₂NiH₄, MgO nanoparticles, amorphous C and remaining layered Ni MOF. This research extends the knowledge of elaborating efficient catalysts via MOFs in hydrogen storage materials.     

Structural characterization and hydrogen storage properties of MgH2–Mg2CoH5 nanocomposites

Mixtures of XMg–Co containing different amounts of Mg (X = 2, 3 and 7) were reactive milled under hydrogen atmosphere. 2Mg–Co only formed the Mg₂CoH₅ complex hydride, while the mixtures 3Mg–Co and 7Mg–Co formed different contents of Mg₂CoH₅ and MgH₂. Their structural features and hydrogen storage properties were analyzed by different techniques. In-situ synchrotron X-ray diffraction, combined with thermal analysis techniques, (differential scanning calorimetry, thermal gravimetric analysis and quadrupole mass spectrometer) was carried out to observe the behavior of the MgH₂–Mg₂CoH₅ mixtures during the first H-desorption. It was found that the presence of the Mg₂CoH₅ complex hydride has a beneficial effect on the first H-desorption of the MgH₂. Additionally, after first desorption, conventional hydrogenation under high pressure and high temperature of 3Mg–Co and 7Mg–Co samples led to the formation of the Mg₆Co₂H₁₁ complex hydride. The presence of Mg₆Co₂H₁₁ considerably impaired the desorption properties of the nanocomposites.     

Hydrogen storage properties of nanostructured 2MgH2Co powders: The effect of high-pressure compression

In this study, MgH₂ and Co powders were mechanically milled in the molar ratio 2:1 and compressed to hard-packed cylindrical pellets. The microstructure, phase changes, and hydrogen storage properties of the mechanically milled 2MgH₂Co powder and the 2MgH₂Co compressed pellet were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and synchronous thermal (DSC/TG) analyses. Dehydrogenation of the 2MgH₂Co compressed pellet is mainly due to the decomposition of Mg₂CoH₅ while it is the dehydriding of MgH₂ for the milled 2MgH₂Co powder. Pressure composition absorption isotherms of the 2MgH₂Co powder and 2MgH₂Co compressed pellet show two and three plateaus, respectively, corresponding to the formation of Mg₆Co₂H₁₁ and Mg₂CoH₅ hydride phases. For the compressed 2MgH₂Co pellet, enthalpies of formation/decomposition were measured to be −58.11±7.69 kJ/mol H₂/55.70±3.34 kJ/mol H₂ for Mg₂CoH₅ and -81.89±10.39 kJ/mol H₂/74.47±5.27 kJ/mol H₂ for Mg₆Co₂H₁₁. In contrast, hydrogenation/dehydrogenation enthalpies of Mg₂CoH₅ and Mg₆Co₂H₁₁ mechanically milled 2MgH₂Co powder were −73.98±10.1 kJ/mol H₂/71.67±1.38 kJ/mol H₂ and -96.86±8.73 kJ/mol H₂/89.95±10.81 kJ/mol H₂, respectively. Fast hydrogenation was observed in the dehydrided 2MgH₂Co compressed pellet with about 2.75 wt% absorbed in less than 1 min at 300 °C and a maximum hydrogen storage capacity of 4.43 wt% (2.32 wt% for the 2MgH₂Co powder) was achieved. The hydrogen absorption activation energy of the 2MgH₂Co compressed pellet (64.34 kJ-mol⁻¹ H₂) is lower than the mechanically milled 2MgH₂Co powder (73.74 kJ-mol⁻¹ H₂). The results show that mechanical milling followed by high-pressure compression is an efficient method for the synthesis of Mg-based complex hydrides with superior hydrogen sorption properties.     

Enhanced hydrogen desorption/absorption properties of magnesium hydride with CeF3@Gn

In order to improve the hydrogen storage performance of MgH₂, graphene and CeF₃ co-catalyzed MgH₂ (hereafter denoted as MgH₂+CeF₃@Gn) were prepared by wet method ball milling and hydriding, which is a simple and time-saving method. The effect of CeF₃@Gn on the hydrogen storage behavior of MgH₂ was investigated. The experimental results showed that co-addition of CeF₃@Gn greatly decreased the hydrogen desorption/absorption temperature of MgH₂, and remarkably improved the dehydriding/hydriding kinetics of MgH₂. The onset hydrogen desorption temperature of Mg + CeF₃@Gn is 232 °C，which is 86 °C lower than that of as-milled undoped MgH₂, and its hydrogen desorption capacity reaches 6.77 wt%, which is 99% of its theoretical capacity (6.84 wt%). At 300 °C and 200 °C the maximum hydrogen desorption rates are 79.5 and 118 times faster than that of the as-milled undoped MgH₂. Even at low temperature of 150 °C, the dedydrided sample (Mg + CeF₃@Gn) also showed excellent hydrogen absorption kinetics, it can absorb 5.71 wt% hydrogen within 50 s, and its maximum hydrogen absorption rate reached 15.0 wt% H₂/min, which is 1765 times faster than that of the undoped Mg. Moreover, no eminent degradation of hydrogen storage capacity occurred after 15 hydrogen desorption/absorption cycles. Mg + CeF₃@Gn showed excellent hydrogen de/absorption kinetics because of the MgF₂ and CeH_2-3 that are formed in situ, and the synergic catalytic effect of these by-products and unique structure of Gn.     

Improved hydrogen storage properties of MgH2 using transition metal sulfides as catalyst

In this study, some transition metal sulfides (TiS₂, NbS₂, MoS₂, MnS, CoS₂ and CuS) are used as catalyst to enhance the hydrogen storage behaviors of MgH₂. The MgH₂-sulfide composites with different sulfides addition are prepared by ball-milling. The phase composition and hydrogen storage properties are studied in detail. The results confirm that all these sulfides can significantly increase the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂–TiS₂ has the best hydrogenation and dehydrogenation kinetics, followed by the MgH₂–NbS₂, MgH₂–MnS, MgH₂–MoS₂, MgH₂–CoS₂, MgH₂–CuS and MgH₂. Also, the onset dehydrogenation temperature of the MgH₂–TiS₂ is about 204 °C, which is lower about 126 °C than that of the MgH₂. The dehydrogenation activation energy can be reduced to 50.8 kJ mol^?1 when doping TiS₂ in MgH₂. The beneficial catalytic effects of the sulfides can be ascribed to the in-situ formation of MgS, TiH₂, NbH, Mo, Mn, Mg₂CoH₅ and MgCu₂ phases.     

Dual-cation K2TaF7 catalyst improves high-capacity hydrogen storage behavior of MgH2

MgH₂ has been extensively regarded as a low-cost hydrogen storage material with high gravimetric hydrogen capacity of approximately 7.6 wt%. However, the hydrogen release and absorption kinetics in MgH₂ still needs further improving. For the first time, the catalytic impacts of a new dual-cation metal fluoride K₂TaF₇ upon the hydrogen storage characteristics of MgH₂ have been investigated in this work. With only 1 wt% K₂TaF₇ dopant, the initial dehydrogenation temperature of MgH₂ was lowered by about 130 °C, releasing more than 7.3 wt% hydrogen totally. The desorption activation energy of MgH₂ + 1 wt% K₂TaF₇ composite was decreased to 107.2 ± 1.2 kJ mol^?1. Besides, at 190 °C, the dehydrogenated MgH₂ + 1 wt% K₂TaF₇ sample could absorb 6.56 wt% H₂, while pristine MgH₂ re-absorbed only 3.45 wt% H₂. Further studies revealed that K₂TaF₇ could react with MgH₂ during dehydrogenation and produce symbiotic hydrides KMgH₃ and TaH_0.8, which could play the role of hydrogen pumps during hydrogen release and uptake. The cooperative catalysis between the hydrogen pump effect and the active interface in the multi-hydride area significantly enhanced the reversible hydrogen storage in the MgH₂+1 wt% K₂TaF₇ composite. This study provides new thinking for novel catalysts to elevate the hydrogen storage performance of MgH₂.     

Facile synthesis of nickel-vanadium bimetallic oxide and its catalytic effects on the hydrogen storage properties of magnesium hydride

To improve the dehydrogenation/hydrogenation performance of magnesium hydride (MgH₂), a nickel-vanadium bimetallic oxide (NiV₂O₆) was prepared by a simple hydrothermal method using ammonium metavanadate and nickel nitrate as raw materials. This oxide was used to improve the hydrogen storage performance of MgH₂. NiV₂O₆ reacted with Mg to form Mg₂Ni and V₂O₅; Mg₂Ni and V₂O₅ played an important role in improving the hydrogen storage properties of MgH₂. The NiV₂O₆-doped MgH₂ had an excellent hydrogen absorption and desorption kinetics performance, and it could absorb 5.59 wt% of hydrogen within 50 min at 150 °C and release about 5.3 wt% of hydrogen within 12 min. The apparent activation energies for the dehydrogenation and hydrogenation of MgH₂-NiV₂O₆ were 92.9 kJ mol^?1 and 24.9 kJ mol^?1, respectively. These were 21.7% and 66.3% lower than those of MgH_2, respectively. The mechanism analysis demonstrated that the improved kinetic properties of MgH₂ resulted from the heterogeneous catalysis of vanadium and nickel.     

Enhancing hydrogen storage properties of the Mg/MgH2 system by the addition of bis(tricyclohexylphosphine)nickel(II) dichloride

This is a first report on the use of the bis(tricyclohexylphosphine)nickel (II) dichloride complex (abbreviated as NiPCy3) into MgH₂ based hydrogen storage systems. Different composites were prepared by planetary ball-milling by doping MgH₂ with (i) free tricyclohexylphosphine (PCy3) without or with nickel nanoparticles, (ii) different NiPCy3 contents (5–20 wt%) and (iii) nickel and iron nanoparticles with/without NiPCy3. The microstructural characterization of these composites before/after dehydrogenation was performed by TGA, XRD, NMR and SEM-EDX. Their hydrogen absorption/desorption kinetics were measured by TPD, DSC and PCT. All MgH₂ composites showed much better dehydrogenation properties than the pure ball-milled MgH₂. The hydrogen absorption/release kinetics of the Mg/MgH₂ system were significantly enhanced by doping with only 5 wt% of NiPCy3 (0.42 wt% Ni); the mixture desorbed H₂ starting at 220 °C and absorbed 6.2 wt% of H₂ in 5 min at 200 °C under 30 bars of hydrogen. This remarkable storage performance was not preserved upon cycling due to the complex decomposition during the dehydrogenation process. The hydrogen storage properties of NiPCy3-MgH₂ were improved and stabilized by the addition of Ni and Fe nanoparticles. The formed system released hydrogen at temperatures below 200 °C, absorbed 4 wt% of H₂ in less than 5 min at 100 °C, and presented good reversible hydriding/dehydriding cycles. A study of the different storage systems leads to the conclusion that the NiPCy3 complex acts by restricting the crystal size growth of Mg/MgH₂, catalyzing the H₂ release, and homogeneously dispersing nickel over the Mg/MgH₂ surface.     

CNTs decorated with CoFeB as a dopant to remarkably improve the dehydrogenation/rehydrogenation performance and cyclic stability of MgH2

The chain-like carbon nanotubes (CNTs) decorated with CoFeB (CoFeB/CNTs) prepared by oxidation-reduction method is introduced into MgH₂ to facilitate its hydrogen storage performance. The addition of CoFeB/CNTs enables MgH₂ to start desorbing hydrogen at only 177 °C. Whereas pure MgH₂ starts hydrogen desorption at 310 °C. The dehydrogenation apparent activation energy of MgH₂ in CoFeB/CNTs doped-MgH₂ composite is only 83.2 kJ/mol, and this is about 59.5 kJ/mol lower than that of pure MgH₂. In addition, the completely dehydrogenated MgH₂−10 wt% CoFeB/CNTs sample can start to absorb hydrogen at only 30 °C. At 150 °C and 5 MPa H₂, the MgH₂ in CoFeB/CNTs doped-MgH₂ composite can absorb 6.2 wt% H₂ in 10 min. The cycling kinetics can remain rather stable up to 20 cycles, and the hydrogen storage capacity retention rate is 98.5%. The in situ formation of Co₃MgC, Fe, CoFe and B caused by the introduction of CoFeB/CNTs can provide active and nucleation sites for the dehydrogenation/rehydrogenation reactions of MgH₂. Moreover, CNTs can provide hydrogen diffusion pathways while also enhancing the thermal conductivity of the sample. All of these can facilitate the dehydrogenation/rehydrogenation performance and cyclic stability of MgH₂.     

Remarkable synergistic effects of Mg2NiH4 and transition metal carbides (TiC,ZrC, WC) on enhancing the hydrogen storage properties of MgH2

Nanostructuring and catalyzing are effective methods for improving the hydrogen storage properties of MgH₂. In this work, transition-metal-carbides (TiC, ZrC and WC) are introduced into Mg–Ni alloy to enhance its hydrogen storage performance. 5 wt% transition-metal-carbide containing Mg₉₅Ni₅ (atomic ratio) nanocomposites are prepared by mechanical milling pretreatment followed by hydriding combustion synthesis and mechanical milling process, and the synergetic enhancement effects of Mg₂NiH₄ and transition-metal-carbides are investigated systematically. Due to the inductive effect of Mg₂NiH₄ and charge transfer effect between Mg/MgH₂ and transition-metal-carbides, Mg₉₅Ni₅-5 wt.% transition-metal-carbide samples all exhibit excellent hydrogen storage kinetic at moderate temperature and start to release hydrogen around 216 °C. Among them, 2.5 wt% H₂ (220 °C) and 4.7 wt% H₂ (250 °C) can be released from the Mg₉₅Ni₅-5 wt.% TiC sample within 1800 s. The unique mosaic structure endows the Mg₉₅Ni₅-5 wt.% TiC with excellent structural stability, thus can reach 95% of saturated hydrogen capacity within 120 s even after 10 cycles of de-/hydrogenation at 275 °C. And the probable synergistic enhancement mechanism for hydrogenation and dehydrogenation is proposed.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

Superior catalysis of NbN nanoparticles with intrinsic multiple valence on reversible hydrogen storage properties of magnesium hydride

Magnesium hydride, as a potential solid state hydrogen carrier has attracted great attention around the world especially in the energy storage domain due to the high hydrogen storage capacity and the good cycling stability. But kinetic and thermodynamic barriers also impede the practical application and development of MgH₂. Nanoscale catalysts are deemed to be the most effective measure to overcome the kinetic barrier and lower the temperature required for hydrogen release in MgH₂. NbN nanoparticles (~20 nm) with intrinsic Nb³⁺-N and Nb⁵⁺-N were prepared using the molten salt method and used as catalysts in the MgH₂ system. It is found that the NbN nanoparticles exhibit a superior catalytic effect on de/rehydrogenation kinetics for the MgH₂/Mg system. About 6.0 wt% hydrogen can be liberated for the MgH₂+5NbN sample within 5 min at 300 °C, and it takes 12 min to desorb the same amount of hydrogen at 275 °C. Meanwhile, the MgH₂+5NbN sample can absorb 6.0 wt% hydrogen within 16 min at 150 °C, and absorb 5.0 wt% hydrogen within 24 min even at 100 °C. Particularly, the catalyzed samples exhibit excellent hydrogen absorption/desorption kinetic stability. After multiple cycles, there is no kinetic attenuation and the hydrogen capacity remains at about 6.0 wt%. It is demonstrated that the NbN nanoparticles with intrinsic multiple valence can be the critical effect in improving the hydrogen storage kinetics of MgH₂. The stability of Nb₄N₃ phase and Nb³⁺-N and Nb⁵⁺-N valence states can ensure a stable catalytic effect in the system.     

Synergistic effect of rGO supported Ni3Fe on hydrogen storage performance of MgH2

Bimetallic catalysts possess unique physical and chemical properties that distinct from the individual, which offer the opportunity to ameliorate the hydrogen storage properties of MgH₂. Herein, a Ni₃Fe catalyst homogeneously loaded on the surface of reduced graphene oxide (Ni₃Fe/rGO) was prepared based on layered double hydroxide (LDH) precursor. The novel Ni₃Fe/rGO nano-catalyst was subsequently doped into MgH₂ to improve its hydrogen storage performance. The MgH₂-5 wt.% Ni₃Fe/rGO composite requires only 100 s to reach 6 wt% hydrogen capacity at 100 °C, while for MgH₂ doped with 5 wt% Ni₃Fe, Ni/rGO and Fe/rGO all require more than 500 s to uptake 3 wt% hydrogen under the same condition. The onset dehydrogenation temperature of the MgH₂-5 wt.% Ni₃Fe/rGO composite is about 185 °C, much lower than that of the MgH₂ doped with 5 wt% Ni₃Fe (205 °C), Ni/rGO (210 °C) and Fe/rGO (250 °C), and it can release H₂ completely even in 1000 s at 275 °C. Besides, the MgH₂-5 wt% Ni₃Fe/rGO displays the lowest dehydrogenation apparent activation energy of 59.3 kJ/mol calculated by Kissinger equation. The synergetic effect attributing to rGO, in-situ formed active species of Mg₂Ni and Fe is in charge of the excellent catalytic effect on hydrogen storage behavior of MgH₂. Meanwhile, this study supplies innovative insights to design high efficiency catalysts based on the LDH precursor.     

Synthesis and decomposition mechanisms of ternary Mg2CoH5 studied using in situ synchrotron X-ray diffraction

A ternary Mg₂CoH₅ hydride was synthesized using a novel method that relies on a relatively short mechanical milling time (1 h) of a 2:1 MgH₂-Co powder mixture followed by sintering at a sufficiently high hydrogen pressure (>85 bar) and heating from RT to 500 °C. The ternary hydride forms in less than 2.5 h (including the milling time) with a yield of ∼90% at ∼300 °C. The mechanisms of formation and decomposition of ternary Mg₂CoH₅ were studied in detail using an in situ synchrotron radiation powder X-ray diffraction (SR-PXD). The obtained experimental results are supported by morphological and microstructural investigations performed using SEM and high-resolution STEM. Additionally, thermal effects occurring during the desorption reaction were studied using DSC. The morphology of as-prepared ternary Mg₂CoH₅ is characterized by the presence of porous particles with various shapes and sizes, which, in fact, are a type of nanocomposite consisting mainly of nanocrystallites with a size of ∼5 nm. Mg₂CoH₅ decomposes at approximately 300 °C to elemental Mg and Co. Additionally, at approximately 400 °C, MgCo is formed as precipitates inserted into the Mg-Co matrix. During the rehydrogenation of the decomposed residues, prior to the formation of Mg₂CoH₅, MgH₂ appears, which confirms its key role in the synthesis of the ternary Mg₂CoH₅.     

Excellent synergistic catalytic mechanism of in-situ formed nanosized Mg2Ni and multiple valence titanium for improved hydrogen desorption properties of magnesium hydride

Nowadays, catalytic doping has been regarded as one of the most promising and effective methods to improve the sluggish kinetics of magnesium hydride (MgH₂). Herein, we synthesized Ni/TiO₂ nanocomposite with the particle sizes about 20 nm by an extremely facile solvothermal method. Then, the Ni/TiO₂ nanocomposite was doped into MgH₂ to enhance its reversible hydrogen storage properties. A remarkably enhancement of de/rehydrogenation kinetics of MgH₂ can be achieved by doped with Ni/TiO₂ nanocomposite, compared to that solely doped with Ni or TiO₂ nanoparticles. The hydrogen desorption peak temperature of MgH₂Ni/TiO₂ is 232 °C, which is 135.4 °C lower than that of ball-milled MgH₂ (367.4 °C). Moreover, the MgH₂Ni/TiO₂ can desorb 6.5 wt% H₂ within 7 min at 265 °C and absorb ∼5 wt% H₂ within 10 min at 100 °C. In particular, the apparent activation energy of MgH₂Ni/TiO₂ is obviously decreased from 160.5 kJ/mol (ball-milled MgH₂) to 43.7 ± 1.5 kJ/mol. Based on the analyses of microstructure evolution, it is proved that metallic Ni particles can react with Mg easily to form fine Mg₂Ni particles after dehydrogenation, and the in-situ formed Mg₂Ni will transform into Mg₂NiH₄ in the subsequent rehydrogenation process. The significantly improved hydrogen absorption/desorption properties of MgH₂Ni/TiO₂ can be ascribed to the synergistic catalytic effect of reversible transformation of Mg₂Ni/Mg₂NiH₄ which act as “hydrogen pump”, and the multiple valence titanium compounds (Ti^4+/3+/2+) which promote the electrons transfer of MgH₂/Mg.     

Enhanced hydrogen absorption and desorption properties of MgH2 with graphene and vanadium disulfide

Magnesium hydride (MgH₂) is the most prominent carrier for storing hydrogen in solid-state mode. However, their slow kinetics and high thermodynamics become an obstacle in hydrogen storage. The present study elaborates on the catalytic effect of graphene (Gr) and vanadium disulfide (VS₂) on MgH₂ to enhance its hydrogen sorption kinetic. The temperature-programmed desorption study shows that the onset desorption temperature of MgH₂ catalyzed by VS₂ and MgH₂ catalyzed by Gr is 289 °C and 300 °C, respectively. These desorption temperatures are 87 °C and 76 °C lower than the desorption temperature of pristine MgH₂. The rapid rehydrogenation kinetics for the MgH₂ catalyzed by VS₂ have been found at a temperature of 300 °C under 15 atm H₂ pressure by absorbing ∼4.04 wt% of hydrogen within 1 min, whereas the MgH₂ catalyzed by Gr takes ∼3 min for absorbing the same amount of hydrogen under the similar temperature and pressure conditions. The faster release of hydrogen was also observed in MgH₂ catalyzed by VS₂ than MgH₂ catalyzed by Gr and pristine MgH₂. MgH₂ catalyzed by VS₂ releases ∼2.54 wt% of hydrogen within 10 min, while MgH₂ catalyzed by Gr takes ∼30 min to release the same amount of hydrogen. Furthermore, MgH₂ catalyzed by VS₂ also persists in the excellent cyclic stability and reversibility up to 25 cycles.