共查询到20条相似文献,搜索用时 450 毫秒
1.
2.
3.
4.
CAD/CAM技术在汽车车身模具国产化中的应用 总被引:1,自引:0,他引:1
以汽车车身某典型零件为例,阐述了如何解决引进车型在车身模具国产化过程中的某些技术问题,内容涉及技术依据转化、产品几何造型以及CAD/CAM一体化的基本方法。 相似文献
5.
利用VRML、JAVA、组态软件等技术开发的大型、重型机械设备三维仿真控制一体化平台,具有真实性、交互性、先进性、经济性、安全性等特点。本文介绍了该操作平台的体系结构和三维虚拟仿真的实现机理,对其关键技术(复杂建模、模型优化和渲染速度)给出了具体的解决方法,并以棉花打包机为例进行验证。 相似文献
6.
7.
铸造行业要面向九十年代应用CAD技术 总被引:3,自引:1,他引:2
铸造行业为了九十年代的市场竞争中取得主动,必须大力加强计算机辅助设计技术的应用,根据目前计算机软硬件的发展水平,铸造计算机辅助设计系统发是一个一体化的、以三维实体表达为基础,以铸件设计为中心的系统,在CAD系统的建立过程中,必须重视规划和系统集成等工作。 相似文献
8.
介绍了压铸模CAD/CAE/CAM一体化技术的主要内容和实现CAD/CAE/CAM一体化的技术路线。实践应用表明,CAD/CAE/CAM一体化技术能有效地指导压铸模具的设计、模拟分析与制造过程,提高模具结构的合理性、准确性和加工精度,服务于实际压铸件生产。 相似文献
9.
基于模具设计与制造岗位任务的分析,针对高职院校学生特点,研究课程设置、设计教学项目、改革教学方法、建设"双师型"的教学团队,模拟实际工作过程来实现《塑料模具设计》课程"教、学、做"一体化教学。 相似文献
10.
11.
12.
13.
5-Br-PADMA分光光度法测定微量铂 总被引:3,自引:1,他引:3
研究了2-〔2-(5-溴吡啶)偶氮〕-5-二甲氨基苯胺(简称5-Br-PADMA)与Pt(IV)配合物的光度特性和显色反应的最佳条件。在pH35~48HAc-NaAc缓冲介质中,沸水浴加热20min,Pt(IV)与5-Br-PADMA形成1:3的紫红色配合物。配合物形成后,提高酸度为08~36mol·L-1盐酸溶液,最大吸收波长红移至620nm,灵敏度和对比度显著提高,表观摩尔吸光系数ε620=65×104L·mol-1·cm-1,对比度λ=186nm。Pt(IV)浓度在0~28μg/25ml遵守比尔定律。大多数常见金属离子不干扰Pt的测定,可满意地应用于催化剂中微量Pt的测定。 相似文献
14.
15.
Manfred H. Akstinat 《工业材料与腐蚀》1970,21(4):273-281
Organic corrosion inhibitors– Action mechanisms and characteristics In this detailed synopsis, the author deals mainly with the action mechanism of corrosion inhibitors in acids. The inhibitors – aliphatic or alicyclic systems – can be divided into six groups, characterized by the presence of: bivalent sulphur, oxygen, trivalent nitrogen, trivalent phosphor, greatly unsaturated centres, or combinations of these factors. In this connection, the author also discusses the parts played by pairs of loosely bound electrons, and by the steric conditions. A distinction is made between four mobile and seven stable adsorption mechanisms. Also discussed are those factors which, though independent of the inhibitor, have an influence on the action mechanism, the type of acid (especially mordant), hydrogen ion concentration, and temperature. 相似文献
16.
17.
研究了氢化处理对Mg-L i-Zn-Y-Zr-RE合金显微组织和力学性能的影响规律,结果表明:铸态Mg-8.16L i-4.10Zn-2.86Y-0.59Zr-2.14RE合金主要由L i、Zn和RE在Mg中的固溶体和Mg-L i-Zn-RE块状化合物共同组成。氢化处理可以明显提高铸态Mg-L i-Zn-Y-Zr-RE合金的力学性能。氢化过程中,氢会与Mg-L i-Zn-Y-Zr-RE合金中稀土反应生成黑色小颗粒状化合物。另外,选用480℃×48 h可以彻底氢化透试样(F12 mm),取得较好的氢化效果。 相似文献
18.
19.
E. N. Kablov A. F. Petrakov V. P. Piskorskii R. A. Valeev E. B. Chabina 《Metal Science and Heat Treatment》2005,47(5-6):227-231
Sintered magnetically hard materials with compositions (Nd0.5 − x
Pr
x
Dy0.5)18(Fe0.7Co0.3)remB5.5 (x = 0.12 − 0.5) and (Nd0.6 − x
Pr
x
Dy0.4)15(Fe0.8Co0.2)remB6 (x = 0.03 − 0.4) are studied. The role of praseodymium (at invariable content of dysprosium and cobalt) in the change of magnetic
properties of the material (residual induction, coercive force, temperature stability) is determined. The phase composition
of the material is identified. The role of praseodymium in the magnetic properties of the material is interpreted.
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 12 – 16, June, 2005. 相似文献