Poly(p-phenylene) graft copolymers with polytetrahydrofuran/polystyrene side chains

1,4-Dibromo-2,5-bis(bromomethyl)benzene was used as a bifunctional initiator in cationic ring opening polymerization (CROP) of tetrahydrofuran. The resulting macromonomer, with a central 2,5-dibromobenzene ring, was reacted in combination with 2,5-dihexylbenzene-1,4-diboronic acid by a Suzuki coupling, in the presence of Pd(PPh₃)₄ as catalyst, leading to a poly(p-phenylene) (PPP) with alternating polytetrahydrofuran (PTHF) and hexyl side chains. A polystyrene (PSt) based macromonomer with a central benzene ring bearing cyclic boronic acid propanediol diester groups, synthesized by atom transfer radical polymerization (ATRP), was also used as partner for PTHF in the cross-coupling reaction. A PPP with alternating PSt and PTHF side chains was obtained. PTHF macromonomer was also homopolymerized by a Yamamoto reaction. The resulting PPPs have high solubility in common organic solvents at room temperature. The new polymers were characterized by GPC, ¹H NMR, ¹³C NMR, IR and UV analysis. Thermal behavior of the precursor PTHF macromonomer and the final polyphenylenes were investigated by TGA and DSC analyses and compared.     

Swelling and drying kinetics of polytetrahydrofuran and polytetrahydrofuran–poly (methyl methacrylate) gels: A photon transmission study

A bifunctional polytetrahydrofuran (PTHF) macromonomer was synthesized by termination of the living polymerization of tetrahydrofuran (THF) initiated by triflic anhydride and the subsequent termination by sodium methacrylate. The PTHF macromonomer thus prepared was polymerized and copolymerized with methyl methacrylate (MMA) by free‐radical polymerization to yield a network and a segmented network of PTHF, both being homogeneous, respectively. These PTHF and PTHF–PMMA gels were used for swelling experiments in chloroform and chloroform vapor. Drying processes were monitored after removing the gels from the solvent and solvent vapor. Photon transmission from PTHF and PTHF–PMMA gels was monitored during swelling and drying processes using a UV‐visible (UVV) spectrophotometer. Transmitted light intensities, I_tr, from these gels increased when they were immersed in chloroform and/or subjected to its vapor. The increase in I_tr was attributed to the homogeneous lattice structure of PTHF and PTHF–PMMA gels which appeared during swelling. The increase in I_tr was modeled using the Li–Tanaka equation from which time constants, τ₁, and cooperative diffusion coefficients, D_C, were determined. A decrease in I_tr after removing choloform and/or its vapor from the cell was observed and attributed to the decrease in homogeneity of lattice structures during drying of the corresponding gels. Time constants, τ2, for the drying processes were also determined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 632–640, 2003     

Synthesis of macromonomer from radical polymerization of styrene with a polymerizable photoiniferter

α‐(Methacrylyoxylethyloxycarbonylmethyl)‐ω‐(N,N‐diethyldithiocarbamyl)polystyrene macromonomers with different molecular weights were prepared by radical polymerization of styrene (St) using β‐methacryloxylethyl 2‐N,N‐diethyldithiocarbamylacetate (MAEDCA) as a polymerizable photoiniferter in toluene under ultraviolet light. The polymerization of St with MAEDCA carried out by a “living” process; that is, both the yield and the molecular weight of the resultant polymers increased with increasing of reaction time, and the resultant polymer was a macromonomer, for example, α‐(methacrylyoxylethyloxycarbonylmethyl)‐ω‐(N,N‐diethyldithiocarbamyl)polystyrene, designated as PSt‐macromonomer. The molecular weight of the PSt‐macromonomer depended on the concentrations of the polymerizable photoiniferter and St, as well as the conversion of St. The PSt‐macromonomer can copolymerize with MMA initiated by AIBN at 65°C to form a graft copolymer (PMMA‐graft‐PSt) with PSt branches randomly distributed along the PMMA backbone. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1350–1356, 2000     

催化链转移聚合法制备聚对甲基苯乙烯大分子单体

首次以钴Ⅱ肟氟化硼配合物(CoBF)催化剂、2,2′-偶氮二异丁腈(AIBN)为引发剂,由催化链转移聚合法制备聚对甲基苯乙烯大分子单体(poly(p-Methylstyrene)),考察不同CoBF的用量对相对分子质量的影响。结果表明:随着CoBF用量的增加,聚对甲基苯乙烯大分子单体的相对分子质量逐渐减小。另外,还采用了基于重均聚合度(DPw)的Mayo方程,计算出催化剂表观链转移常数(ct)为365.6。     

Viscoelastic and thermal decomposition behaviors of polytetrahydrofuran binder prepared using glycerin as a crosslinking modifier

Polytetrahydrofuran (PTHF) is an effective binder ingredient used for improving the performance of propellants. PTHF becomes sufficiently rubbery for use as a binder with the addition of an adequate crosslinking modifier. This study investigated the viscoelastic and thermal decomposition behaviors of the PTHF binder prepared using glycerin as a crosslinking modifier, as well as the influence of the molecular weight of PTHF on the characteristics of the PTHF binder. The curing behavior of the PTHF binder was suitable for the manufacture of propellants, and the superior tensile properties of the PTHF binder made it suitable for use as a propellant binder. The degree of crosslinking of the samples decreased as the molecular weight of the PTHF increased. The PTHF binder has unique dynamic mechanical properties owing to its melting and chemical structure, and these properties were dependent on the molecular weight of PTHF. The glass transition temperature (T_g) and the loss tangent at T_g decreased as the molecular weight of the PTHF increased. The temperature and frequency dependence of the PTHF binder were influenced by the melting point of PTHF. The viscoelastic properties of the binder prepared using PTHF with a molecular weight of 650 followed the time–temperature superposition principle. The activation energy for the relaxation of this binder varied remarkably at the melting point of PTHF. The thermal decomposition behavior indicated that at low temperatures, the consumption rate of the binder with low‐molecular‐weight PTHF was slightly larger than that of the binder with high‐molecular‐weight PTHF. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

RAFT synthesis of poly(N‐isopropylacrylamide) and poly(methacrylic acid) homopolymers and block copolymers: Kinetics and characterization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used successfully to synthesize temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm), poly(methacrylic acid) (PMAA), and their temperature‐responsive block copolymers. Detailed RAFT polymerization kinetics of the homopolymers was studied. PNIPAAm and PMAA homopolymerization showed living characteristics that include a linear relationship between M _n and conversion, controlled molecular weights, and relatively narrow molecular weight distribution (PDI < 1.3). Furthermore, the homopolymers can be reactivated to produce block copolymers. The RAFT agent, carboxymethyl dithiobenzoate (CMDB), proved to control molecular weight and PDI. As the RAFT agent concentration increases, molecular weight and PDI decreased. However, CMDB showed evidence of having a relatively low chain transfer constant as well as degradation during polymerization. Solution of the block copolymers in phosphate buffered saline displayed temperature reversible characteristics at a lower critical solution temperature (LCST) transition of 31°C. A 5 wt % solution of the block copolymers form thermoreversible gels by a self‐assembly mechanism above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1191–1201, 2006     

Syntheses of mono(1,3-oxazolin-2-yl)-terminated oligopropene macromonomers and novel polymers containing oligopropene side chains

Summary Mono(1,3-oxazolin-2-yl)-terminated atactic oligopropene with M_n=710g/mol was derived in high yields from monoester-terminated oligopropene via reaction with 2-aminoethanol and subsequent Ti(OC₄H₉)₄-catalyzed dehydration at 180°C. Cationic bulk polymerization of this novel macromonomer, initiated with 2 mol% methyl-4-nitrobenzenesulfonate at 200°C, afforded high molecular weight poly[N-oligopropene-1-carbonyl]-ethyleneimine]. Grafting of mono(1,3-oxazolin-2-yl)-terminated oligopropene with poly(ethene-co-methacrylic acid), containing 3 mol% methacrylic acid, by heating both components for 15minutes at 220°C yielded novel ethene copolymers containing 41wt% esteramide-coupled oligopropene as side chains.     

A new PDMS macromonomer stabilizer for dispersion polymerization of styrene in supercritical carbon dioxide

Free radical polymerization of styrene in supercritical CO₂ requires addition of a surfactant to produce polystyrene (PS) in high conversion and molecular weight with well‐defined particle sizes. In this work, we examined a new stabilizer that can provide effective stabilization for the polymerization of styrene. A commercially available poly(dimethylsiloxane) macromonomer has been employed as a stabilizer for dispersion polymerization of PS in scCO₂. The reactions were conducted in a 225‐mL stainless steel autoclave over the temperature range 60–80°C and under pressures of 1,500 to 3,000 psi. After 2–12 h of polymerization, the conversion determined by gravimetrical method was between 20 and 80%. These preliminary results suggest that this macromonomer offers satisfactory stabilization for the styrene system. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 545–549, 2004     

Effect of stoichiometric imbalances on the melt condensation polymerization of poly(dodecamethylene terephthalamide) studied by intrinsic viscosity and 13C‐NMR

Poly(dodecamethylene terephthalamide) (PA‐12,T) was synthesized by melt condensation polymerization of 12,T salt with 0, 1, 3, 5, or 10% molar excess of 1,12‐diaminododecane (DA), terephthalic acid (TA), or benzoic acid (BA). Intrinsic viscosities (IV) (0.5 g/dL in 96% H₂SO₄ at 25°C) were measured to determine relative molecular weight differences. IV was highest for reactions containing 1 and 3 mol % excess DA (1.36 and 1.31 dL/g, respectively), followed by the product of pure 1 : 1 salt (1.25 dL/g). For all concentrations of excess TA and BA, IV was decreased. ¹³C‐NMR chemical shifts for DA, TA, and BA end groups were identified and their concentrations determined by comparison with the intensity of main chain polymer peaks. A log–log plot of IV versus number average molecular weight calculated from ¹³C‐NMR data shows a linear trend with Mark‐Houwink constants of K = 55.8 × 10^?5 dL/g and α = 0.81. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nanofiltration membranes prepared by direct microemulsion copolymerization using poly(ethylene oxide) macromonomer as a polymerizable surfactant

A novel polymer membrane with nanosized pore structures has been prepared from the direct copolymerization of acrylonitrile (AN) with a polymerizable nonionic surfactant in water‐in‐oil (w/o) or bicontinuous microemulsions. This polymerizable surfactant is ω‐methoxy poly(ethylene oxide)₄₀ undecyl‐α‐methacrylate macromonomer [CH₃O (CH₂CH₂O)₄₀ (CH₂)₁₁ OCO(CH₃)CCH₂, abbreviated: C₁‐PEO‐C₁₁‐MA‐40]. Besides PEO macromonomer, AN, and crosslinker ethyleneglycol dimethacrylate, the microemulsion system contained varying amount of water that formed w/o microemulsions having water droplet structures and bicontinuous microemulsions consisting of interconnected water channel. The polymerized membranes prepared in this study have pore radii ranging from 0.38 to 2.4 nm as evaluated by PEG filtration. The pore size appears to vary linearly with water content in precursor microemulsions. But a sharp change in the gradient of the linear relationship is observed around 25 wt % water content. Membranes made from bicontinuous (>25 wt % water) microemulsion polymerization have a larger and interconnected (open‐cell) nanostructures. In contrast, much smaller closed‐cell (disinterconnected) nanostructures were obtained from w/o (<25 wt % water) microemulsion polymerization and the membrane exhibited a permselectivity toward water in pervaporation separation of high ethanol (>50 wt %) aqueous solutions. The separation factor (α) for 95% ethanol aqueous solution by the membrane derived from the microemulsion containing 10 wt % water is about 20. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2785–2794, 2000     

均匀设计法研究聚四氢呋喃的阳离子开环聚合制备工艺

采用高氯酸/乙酸酐引发四氢呋喃阳离子开环聚合制备出聚四氢呋喃,并用均匀设计法研究了各工艺参数的影响,通过多元逐步回归的方法对结果进行分析得到聚四氢呋喃产物相对分子质量的预测方程,同时评价了聚合过程中高氯酸加入量、乙酸酐加入量及聚合时间对产物相对分子质量和相对分子质量分布的影响。研究发现,在选取的研究范围内,乙酸酐加入量、高氯酸加入量和聚合时间对聚四氢呋喃产物相对分子质量影响的显著性依次降低,其中聚合时间的影响可以忽略;聚四氢呋喃的相对分子质量分布则几乎不受工艺参数的影响。     

Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain

A four‐step synthetic strategy was applied to achieve novel methacrylic monomers. 5‐Norbornene‐2,2‐dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3‐diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing polymethacrylates, which were characterized by FTIR and ¹H‐NMR spectroscopy and differential scanning calorimetry and thermogravimetric thermal analysis. Gel permeation chromatography was performed to determine molecular weight averages and polydispersity. The polymethacrylate having naphthalenic nuclei was recognized to be the highest molecular weight polymer (M̄_n = 12144, η_inh = 0.80 dL/g) with the highest thermal stability. All the polymers showed good solubility in a variety of common organic solvents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 30–38, 2000     

Synthesis of copolymers containing opposite charged comonomers and their interactions with metal ions

Radical polymerization was used to synthesize three copolymers of [3‐(methacryloylamino)propyl]trimethylammonium chloride and methacrylic acid [P(MPTA‐co‐MA)]; three copolymers of MPTA and 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid [P(MPTA‐co‐APSA)], which had different feed monomer mole ratios but a constant total number of moles (0.03 mol); and the homopolymers poly(MPTA), poly(MA), and poly(APSA). The yields for all homopolymers and copolymers were over 70 and 90%, respectively. All products were dissolved in water, purified, and fractioned by an ultrafiltration membrane with different exclusion limits of the molecular weight (3,000, 10,000, 30,000, and 100,000 g mol^?1). All fractions were lyophilized. The polymeric materials were characterized by FTIR and ¹H‐NMR spectroscopy. The metal ion interaction with the hydrophilic polymers was determined as a function of the pH and the filtration factor. It was dependent on the pH, type of ligand group, and charge of the metal ion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1715–1721, 2003     

Telechele als bausteine für neuartige polymere

The developments in the syntheses of α,ω-bifunctional oligomers (telechelics) are revued. Telechelic soft segments are synthesized by cationic, anionic and radical polymerization of vinyl and heterocyclic monomers. Telechelic PTHF obtained with CH₃CO⁺/Ac₂O stems from an equilibrating process and not from a transfer reaction. Telechelic polyisobutene is formed by the inifer technique of Kennedy. The use of lithium initiators with protected functional groups in butadien polymerization results in products with high 1.4-content. The group transfer polymerisation is specially suited to prepare telechelic PMMA of narrow molecular weight distribution. The “dead end” polymerisation is a necessary condition to obtain a functionality of two by radical polymerization. The synthesis of telechelic hard segments of the PPO and PPS type is described.     

A study on the optical properties of three‐armed polystyrene and poly(styrene‐b‐isobutyl methacrylate)

Atom transfer radical polymerization (ATRP) of three‐armed polystyrene[PS] and poly(styrene‐b‐isobutyl methacrylate)[PS‐b‐PiBμMA] were accomplished using an initiator with tri‐active C‐Br end group function and cuprous (I) bromide/2,2′‐bipyridyne catalytic system. The characterization obtained by FT‐IR, ¹H‐NMR, and GPC techniques. The average molecular weight and polydispersity of PS and PS‐b‐PiBμMA were determined as 19,800, 29,300 and as 1.37 and 1.15, respectively, which indicates that the constant concentration of growing chains are present throughout the polymerization. The refractive index and extinction coefficient of the samples were determined in the visible range as a function of wavelength. The refractive index dispersion curves of the thin films were fitted by the Cauchy‐Sellmeier model. The width of localized states (E_u) values changed inversely with optical band gaps (E_g) of the films. While the calculated E_u values of films for initiator, PS and PS‐b‐PiBμMA were determined as 2.72, 2.98, and 2.94 eV, the E_g values were determined as 3.43; 3.11, and 3.16 eV, respectively. The dispersion parameters of thin films were determined. These parameters changed in the investigated wavelength ranges. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Temperature and pH responsive hydrogels based on polyethylene glycol analogues and poly(methacrylic acid) via click chemistry

A novel temperature responsive copolymer, poly[2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol)methacrylate‐co‐N‐hydroxymethyl acrylamide] [P(MEO₂MA‐co‐OEGMA‐co‐HMAM)], was synthesized by atom transfer radical polymerization. pH responsive poly(methacrylic acid) (PMAA) was synthesized by reversible addition‐fragmentation chain transfer polymerization. After the hydroxyl groups on P(MEO₂MA‐co‐OEGMA‐co‐HMAM) were transformed into azide groups and the carboxyl groups on PMAA were transformed into alkyne groups respectively, a novel temperature and pH responsive hydrogel was fabricated by click chemistry between the azide‐P(MEO₂MA‐co‐OEGMA‐co‐HMAM) and alkyne‐PMAA in the presence of CuSO₄ and sodium ascorbate in aqueous solution. The rheological kinetics of gel formation demonstrated that gelation had commenced within 5 min at 25 °C, since then the storage modulus (G′) was higher than the loss modulus (G″). SEM images of hydrogel morphology and the swelling ratios of hydrogel at different temperatures and pH proved that the formed hydrogel had temperature and pH sensitivities. Bovine serum albumin was used as a model to evaluate the sustained release of the hydrogel; the results indicated that the hydrogel was a promising candidate for controlling protein drug delivery. © 2015 Society of Chemical Industry     

Reversible addition–fragmentation chain transfer polymerization of styrene with benzoimidazole dithiocarbamate as a reversible addition–fragmentation chain transfer agent

Two novel dithiocarbamates [2‐Y‐benzoimidazole‐1‐carbodithioic acid benzyl esters: Y = methyl (1b) or phenyl (1c)] were synthesized and successfully used in the reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene in bulk with thermal initiation. The effects of the temperatures and concentration ratios of the styrene and RAFT agents on the polymerization were investigated. The results showed that the polymerization of styrene could be well controlled in the presence of 1b or 1c. The linear relationships between ln([M]₀/[M]) and the polymerization time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) indicated that the polymerizations were first‐order reactions with respect to the monomer concentration. The molecular weights increased linearly with the monomer conversion and were close to the theoretical values. The molecular weight distributions [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] were very narrow from 5.3% conversion up to 94% conversion (M_w/M_n < 1.3). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 560–564, 2006     

Mechanism of particle formation in radical emulsion copolymerization of styrene with α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer

In the batch emulsion copolymerization of styrene and α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer, carried out at macromonomer concentrations exceeding the critical micelle concentration (c_mc), particles are formed by a two-step coagulative nucleation mechanism. This mechanism leaves its mark on morphology of particle interface, rate of polymerization and on molecular weight distribution of the obtained polymer. AFM studies revealed that the interface of particles is composed of objects with dimensions close to dimensions of the primary particles. Compartmentalization of styrene in the macromonomer micelles leads to the higher initial rate of styrene conversion than in the similar macromonomer free homopolymerization of styrene. The initial polymerization in the monomer-swollen macromonomer micelles, similar to the microemulsion polymerization, is responsible for the formation of the highest molecular weight component. In the mature particles there are two different polymerization loci: the interfacial layer and the core. This leads to bimodal molecular weight distribution of the formed polymer.     

Influence of seed polymer molecular weight on polymerization kinetics and particle morphology of structured styrene–butadiene latexes

Heterogeneous film‐forming latexes were prepared using two‐stage, seeded emulsion polymerization. The polymerization was performed in a calorimetric reactor with a control unit that monitored the reaction rate and controlled the charging rate of the monomers. Three types of styrene seed latexes were prepared at 70°C. The first was an unmodified polystyrene (PS) latex. The second had the molecular weight lowered by the use of carbon tetrachloride (CCl₄) as a chain‐transfer agent, added at the start of the polymerization. For the third one, divinylbenzene (DVB) was used as a comonomer. DVB was added under starved conditions near the end of the polymerization to achieve crosslinked particle shells and to introduce double bonds as possible grafting sites. The second polymerization step was performed at 80°C as a batch operation in a 200‐mL calorimeter reactor. The second‐stage polymer was poly(styrene‐co‐butadiene‐co‐methacrylic acid) (S/B/MAA). A fixed S/B ratio was used together with varying small amounts of MAA. Particle morphology and particle‐size distributions were examined after the second stage using TEM after staining with osmium tetroxide. The particle morphology was found to depend on both the seed composition and the amount of MAA used in the second stage. Molecular weight and crosslinking of the DVB‐containing seed influenced the internal particle viscosity, which gave differences in the polymerization rate and the particle morphology. Crosslinking of the second‐stage polymer decreased the monomer concentration in the particles, which could be detected as a change in the slope the pressure/conversion curve. This phenomenon was used to indicate the critical conversion for crosslinking of the second‐stage polymer. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 297–311, 2000     

Synthesis and characterization of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers by atom‐transfer radical polymerization

Well‐defined polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐PS triblock copolymers were synthesized by atom‐transfer radical polymerization (ATRP), using C—X‐end‐group PEO as macroinitiators. The triblock copolymers were characterized by infrared spectroscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The experimental results showed that the polymerization was controlled/living. It was found that when the number‐average molecular weight of the macroinititors increased from 2000 to 10,000, the molecular weight distribution of the triblock copolymers decreased roughly from 1.49 to 1.07 and the rate of polymerization became much slower. The possible polymerization mechanism is discussed. According to the Cu content measured with atomic absorption spectrometry, the removal of catalysts, with CHCl₃ as the solvent and kaolin as the in situ absorption agent, was effective. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2882–2888, 2000