On the impact response of sandwich composites with cores of balsa wood and PVC foam

This paper presents an experimental investigation on impact response of sandwich composite panels with PVC foam core and balsa wood core. A number of tests were performed under various impact energies. Damage process of the sandwich composites is analyzed from cross-examining load–deflection curves, energy profile diagrams and the damaged specimens. The primary damage modes observed are; fiber fractures at upper and lower skins, delaminations between adjacent glass–epoxy layers, core shear fractures, and face/core debonding. After visual inspection of the top and bottom face-sheets, initial examination, damage mechanisms at the interior layers and cores were ascertained through destructive analysis, i.e. sectioning by an abrasive water-jet machine, of samples. In addition to the single impacts, repeated impact response of the samples is also investigated.     

The interaction between matrix cracks and delaminations during quasi-static impact of composites

This paper discusses the investigation of the impact process for beam-like composite specimens. The research is focused on the initiation of delaminations at matrix cracks and on the interaction of delaminations with matrix cracks. The research is based on experiments and on finite element calculations. This study improves the fundamental understanding of the impact process in composite laminates, and gives clear indications on the relative influence of different material properties (transverse strength, interlaminar fracture toughness) on the damage development during impact.     

Stiffness and fracture analysis of laminated composites with off-axis ply matrix cracking

Matrix cracks parallel to the fibres in the off-axis plies is the first intralaminar damage mode observed in laminated composites subjected to static or fatigue in-plane tensile loading. They reduce laminate stiffness and strength and trigger development of other damage modes, such as delaminations. This paper is concerned with theoretical modelling of unbalanced symmetric laminates with off-axis ply cracks. Closed-form analytical expressions are derived for Mode I, Mode II and the total strain energy release rates associated with off-axis ply cracking in [0/θ]_s laminates. Stiffness reduction due to matrix cracking is also predicted analytically using the Equivalent Constraint Model (ECM) of the damaged laminate. Dependence of the degraded stiffness properties and strain energy release rates on the crack density and ply orientation angle is examined for glass/epoxy and carbon/epoxy laminates. Suitability of a mixed mode fracture criterion to predict the cracking onset strain is also discussed.     

纤维增强复合材料层板高速倾斜冲击损伤数值模拟

根据复合材料三维黏弹性本构关系, 建立了纤维增强复合材料层板高速倾斜冲击损伤的数值分析模型。该模型在复合材料层间引入界面单元模拟层间分层, 结合三维Hashin失效准则进行单层板面内损伤识别, 引入材料刚度折减方案, 采用非线性有限元方法, 研究高速倾斜冲击下复合材料层板的破坏过程和损伤特性。研究结果表明: 层板的主要损伤形式是层间分层、 基体微裂纹和纤维断裂; 冲击速度不变而入射角度增大时, 剩余速度减小, 层板损伤面积在一定入射角度范围内有明显变化; 入射角度不变而冲击速度增大时, 剩余速度增大, 层板损伤面积在一定速度范围内也有明显变化。     

Tension fatigue analysis and life prediction for composite laminates

A tension fatigue life prediction methodology for composite laminates is presented. Tension fatigue tests were conducted on quasi-isotropic and orthotropic glass epoxy, graphite epoxy, and glass/graphite epoxy hybrid laminates. Edge delamination onset data were used to generate plots of strain energy release rate as a function of cycles to delamination onset. These plots were then used along with strain energy release rate analyses of delaminations initiating at matrix cracks to predict local delamination onset. Stiffness loss was measured experimentally to account for the accumulation of matrix cracks and for delimination growth. Fatigue failure was predicted by comparing the increase in global strain resulting from stiffness loss to the decrease in laminate failure strain resulting from delaminations forming at matrix cracks through the laminate thickness. Good agreement between measured and predicted lives indicated that the through-thickness damage accumulation model can accurately describe fatigue failure for laminates where the delamination onset behaviour in fatigue is well characterized, and stiffness loss can be monitored in real time to account for damage growth.     

Characterization of high-velocity impact damage in CFRP laminates: Part I – Experiment

This study investigated mechanisms of the extension of high-velocity impact damage in CFRP laminates. To this end, damage states due to near-perforation impact were studied in detail. This study consists of two parts. Part I presents the experiment results of high-velocity impact tests for CFRPs with specified stacking sequences. A crater and splits were observed on the impacted surface, while multiple splits with fiber breaks extended on the back surface. The cross-section beneath the impact point included catastrophic ply failure with extensive fiber breaks. Impacted specimens also exhibited a particular delamination pattern consisting of pairs of symmetric fan-shaped delaminations emanating from to the impact point and elongated delamination along the cracks in the bottom ply. These damage patterns were common to all of the stacking sequences. Part II of this study presents a numerical analysis of high-velocity impact based on smoothed-particle hydrodynamics and discusses damage extension mechanisms.     

Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations

This paper is the follow-up on the previous work by the authors on the experimental evaluation of the impact damage resistance of laminates with dispersed stacking sequences. The current work focuses on the evaluation of the impact performance of the tested laminates by innovative numerical methods.Constitutive models which take into account the physical progressive failure behaviour of fibres, matrix, and interfaces between plies were implemented in an explicit finite element method and used in the simulation of low-velocity impact events on composite laminates. The computational effort resulted in reliable predictions of the impact dynamics, impact footprint, locus and size of delaminations, matrix cracks and fibre damage, as well as the amount of energy dissipated through delaminations, intraply damage and friction. The accuracy achieved with this method increases the reliability of numerical methods in the simulation of impact loads enabling the reduction of the time and costs associated with mechanical testing.     

Damage sequence in thin-ply composite laminates under out-of-plane loading

The study of the damage sequence in polymer-based composite laminates during an impact event is a difficult issue. The problem can be more complex when the plies are thin. In this paper, quasi-static indentation tests were conducted on thin-ply laminates to understand qualitatively the damage mechanisms and their sequence during low-velocity impact loading. TeXtreme® plain weave plies were used with two different thicknesses, 0.08 mm and 0.16 mm (referenced as ultra-thin-ply and thin-ply, respectively), and tested under different load levels. Load–displacement curves were analyzed and the extent of damage was inspected using optical microscopy and ultrasonic technique. The results showed that the damage onset occurs earlier in thin-ply laminates. The damage onset in thin-ply laminates is matrix cracking which induces delaminations, whereas for ultra-thin-ply laminates is due to delaminations which are induced by shear forces and small amount of matrix cracking. Moreover, the fiber breakage appears earlier in ultra-thin-ply laminates.     

Interaction between matrix cracking and edge delamination in composite laminates

Matrix cracking and edge delamination are two main damage modes in continuous-fibre composite laminates. They are often investigated separately, and so the interaction between two damage modes has not yet been revealed. In this paper, a simple parallel-spring model is introduced to model the longitudinal stiffness reduction due to matrix cracking and edge delamination together. The energy release rate of edge delamination eliminating the matrix crack effect and the energy release rate of matrix cracking in the presence of edge delamination are then obtained. Experimental materials include carbon- and glass-fibre-reinforced bismaleimide composite laminates under static tension. The growth of matrix cracks and edge delaminations was recorded by means of NDT techniques. Results show that matrix cracks may initiate before or after edge lamination. This depends on the laminate layup, and especially on the thickness of the 90° plies. Edge delamination may also induce matrix cracking. Matrix cracking has a significant effect on the stiffness reduction in GRP laminates. The present model can predict the stiffness reduction in a laminate containing both matrix cracks and edge delaminations. The mixed-mode delamination fracture toughness obtained from the present model shows up to 50% differences compared with O'Brien's model for GRP laminates. However, matrix cracking has a small effect on the mixed-mode interlaminar fracture toughness of the CFRP laminates.     

An extended Layerwise method for composite laminated beams with multiple delaminations and matrix cracks

For the delamination and matrix crack prediction of composite laminated structures, the methods based on the damage mechanics and fracture mechanics are most commonly used. However, there are very few methods that can accurately simulate the delaminations together with matrix cracks, although the in‐plane matrix cracks always exist alongside the delaminations under impact loading. In this work, an extended layerwise method is developed to model the composite laminated beam with multiple delaminations and matrix cracks. In the displacement field, the nodes in the thickness direction are located at the middle surface of each single layer, the top surface and the bottom surface of the composite beams. The displacement field contains the linear Lagrange interpolation functions, the one‐dimensional weak discontinuous function and strong discontinuous function. The strong and weak discontinuous function are applied to model the displacement discontinuity induced by delaminations and the strain discontinuity induced by the interface between the layers, respectively. Because the nodes in the thickness direction are located at the middle surface of each single layer, the extended layerwise method can be conveniently employed to deal with the in‐plane matrix cracks combined with the extend FEM. Copyright © 2014 John Wiley & Sons, Ltd.     

An experimental investigation on the impact behavior of hybrid composite plates

In this experimental study, the impact behavior of hybrid composite plates has been investigated. The increasing impact energy was performed on two types of hybrid composite plates (glass–carbon/epoxy) until complete perforation of specimens. An energy profiling method, showing the relationship between impact energy and absorbed energy, was used together with load–deflection curves to determine the penetration and perforation thresholds of hybrid composites. The failure processes of damaged specimens for different impact energies were evaluated by comparing load–deflection curves and images of damaged samples taken from impacted sides and non-impacted sides. Cross-sections of damaged specimens were also inspected visually and discussed to assess the extent of damage, such as fiber fracture in layers, expansion of delaminations between adjacent layers. The perforation threshold of hybrid composite impacted from surface with carbon fibers was found approximately 30% higher than that of surface with glass fibers.     

Damage prediction in composite sandwich panels subjected to low-velocity impact

The paper illustrates the application of a finite element tool for simulating the structural and damage response of foam-based sandwich composites subjected to low-velocity impact. Onset and growth of typical damage modes occurring in the composite skins, such as fibre fracture, matrix cracking and delaminations, were simulated by the use of three-dimensional damage models (for intralaminar damage) and interfacial cohesive laws (for interlaminar damage). The nonlinear behaviour of the foam core was simulated by a crushable foam plasticity model. The FE results were compared with experimental data acquired by impact testing on sandwich panels consisting of carbon/epoxy facesheets bonded to a PVC foam. Good agreement was obtained between predictions and experiments in terms of force histories, force–displacement curves and dissipated energy. The proposed model was also capable of simulating correctly nature and size of impact damage, and of capturing the key features of individual delaminations at different depth locations.     

Influence of fiber/matrix interfacial adhesion on composite fracture behavior

A systematic study has been conducted to identify the effect of fiber/matrix interface strength on various composite properties. A new fiber treatment technique was developed to allow fibers to be treated and then made into prepregs and composites of acceptable quality. T500 carbon fibers were treated with release agent to establish the extreme case of poor fiber/matrix interface. Composite systems made of toughened epoxy R6376 and T500 fibers with and without such a treatment were subjected to a number of fracture and impact tests. For tests involving propagating pre-existing delamination cracks, such as double cantilever beam (DCB), end notched flexural (ENF) and crack lap shear (CLS) methods, the material properties were not appreciably affected by the release agent-treated fiber surfaces. For tests that had to initiate cracks in specimens without pre-introduced cracks, such as impact and edge delamination, the material variables and failure modes were highly sensitive to the fiber/matrix interface. The critical role of the fiber/matrix interface in crack initiation was demonstrated in this study.     

Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact

The low velocity impact behavior of three layer thermoplastic laminates consisting of woven glass fiber and polypropylene has been investigated for two different fiber volume configurations. Panels with configurations of 50/50 and 20/80 in the warp and fill directions were subjected to low velocity impact energies between 4 and 16 J using an instrumented dropping weight impact tower. Load vs. displacement plots showed the excellent energy absorbing capabilities exhibited by the woven composites. Both configurations dissipated approximately 75% of the 16 J incident impact energy. An energy-balance model was used to successfully predict the impact response of the woven thermoplastic composites. The impact damaged plates were tested under four point bend (4 PB) loading conditions. Results showed a reduction in flexural strength and modulus as the impact energy increased. A simple compression molding damage repair process was applied to the 16 J impacted composite plates. 4 PB testing of the repaired samples revealed a significant recovery in the flexural strength and modulus of the thermoplastic woven composite with both fiber configurations.     

(Al2O3)f/Al复合材料在强界面结合下的疲劳损伤模式

在拉-拉载荷下测定了(Al₂O₃)_f/Al复合材料的疲劳寿命(S-N)曲线。通过夭折试验以及SEM疲劳断口和纵截面组织结构分析,研究了复合材料的疲劳损伤模式。研究结果表明,(Al₂O₃)_f/Al复合材料的疲劳极限为750MPa,远高于SCS-6碳化硅纤维增强钛基复合材料。该复合材料兼有钛基和树脂基纤维复合材料疲劳损伤的特点,高应力下由单个裂纹的起源和生长导致复合材料的失效;低应力下,疲劳损伤模式包括纤维劈裂、众多基体裂纹和单个基体裂纹的横向扩展。其中纤维劈裂是主控机制。其更高的疲劳极限可归因于低应力下纤维的纵向劈裂。     

Response of notched carbon/PEEK and carbon/epoxy laminates subjected to tension fatigue loading

In this study a comparison is made between the tensile static and fatigue behaviours of quasi-isotropic carbon/PEEK and carbon/epoxy notched laminates, selected as separate representatives of both tough and brittle matrix composites. Damage progression was monitored by various non-destructive (ultrasonic scanning and x-radiography) and destructive (deply and microscopic examinations) techniques, and by continuously measuring the change in stiffness, in order to identify the effect of damage on mechanical properties.
The experimental observations indicated that fatigue damage in carbon/epoxy laminates consists of a combination of matrix cracks, longitudinal splitting and delaminations which attenuate the stress concentration and suppress fibre fracture at the notch; as a consequence, fatigue failure can be reached only after very high numbers of cycles while tensile residual strengths continuously increase over the range of lives investigated (10³–10⁶ cycles). Due to the superior matrix toughness and the high fibre-matrix adhesion, the nature of fatigue damage in carbon/PEEK laminates strongly depends on the stress level. At high stresses the absence of early splitting and delaminations promotes the propagation of fibre fracture therefore resulting in poor fatigue performances and significant strength reductions; while at low stress levels damage modes are matrix controlled and this again translates into very long fatigue lives. These results indicate a strong influence of the major damage mechanisms typical of the two material systems on the behaviour of the laminates, with the nature, more than the amount, of damage appearing as the controlling parameter of the material response up to failure.     

Influence of overloads and block loading sequences on Mode III fatigue crack propagation in A469 rotor steel

A study has been made of the influence of variable amplitude loading on Mode III (anti-plane shear) fatigue crack propagation in circumferentially-notched cylindrical specimens of ASTM A469 rotor steel (yield strength 621 MN/m²), subjected to cyclic torsional loading. Specifically, transient crack growth behavior has been examined following spike and fully-reversed single overloads and for low-high and high-low block loading sequences, and the results compared to equivalent tests for Mode I (tensile opening) fatigue crack growth. It is found that the transient growth rate response following such loading histories is markedly different for the Mode III and Mode I cracks. Whereas Mode I cracks show a pronounced transient retardation following single overloads (in excess of 50% of the baseline stress intensity), Mode III cracks show a corresponding acceleration. Furthermore, following high-low block loading sequences, the transient velocity of Mode I cracks is found to be less than the steady-state velocity corresponding to the lower (current) load level, whereas for Mode III cracks this transient velocity is higher. Such differences are attributed to the fact that during variable amplitude loading histories. Mode III cracks are not subjected to mechanisms such as crack tip blunting/branching and fatigue crack closure, which markedly influence the behavior of Mode I cracks. The effect of arbitrary loading sequences on anti-plane shear crack extension can thus be analyzed simply in terms of the damage accumulated within the reversed plastic zones for each individual load reversal. Based on a micro-mechanical model for cyclic Mode III crack advance, where the crack is considered to propagate via a mechanism of Mode II shear (along the main crack front) of voids initiated at inclusion close to the crack tip, models relying on Coffin-Manson damage accumulation are developed which permit estimation of the cumulative damage, and hence the crack growth rates, for arbitrary loading histories. Such models are found to closely predict the experimental post-overload behavior of Mode III cracks, provided that the damage is confined to the immediate vicinity of the crack tip, a notion which is consistent with fractographic analysis of Mode III fracture surfaces.     

z-pin增韧复合材料层合板低速冲击损伤过程研究

从z-pin增韧复合材料层合板低速冲击实验出发,考虑了复合材料层合板在受低速冲击时的分层及基体开裂等四种损伤形式,引入适当的损伤判据,对T300/3234碳纤维树脂基复合材料层合板的低速冲击损伤过程进行有限元模拟。结果表明,采用碳纤维钉z-pin增韧使得冲击后层间分层区域面积减小50%左右,有限元结果与实验数据吻合。     

不同层数的超高分子量聚乙烯纬平针织复合材料冲击损伤

研究了不同层数超高分子量聚乙烯(UHMWPE)纤维/环氧树脂纬平针织复合材料的冲击性能,并讨论了其冲击损伤模式。复合材料板分别为4、6、8层纬平针织结构,采用真空辅助树脂传递模塑(VARTM)工艺层合而成,以不同的冲击能量(10~55J)冲击复合材料板直至层合板被穿透,得到冲击能量与吸收能量关系图以及接触力-挠度曲线。分析了不同冲击能量下,复合材料中织物的损伤形式和破坏过程。研究结果表明:在3种针织结构复合材料中,8层纬平针织结构承受载荷的能力最强,6层纬平针织结构次之,4层纬平针织结构最差;随着冲击能量的增加,3种试样的冲击挠度均增大;基体开裂、纤维断裂是试样被渗透时有效的损伤模式,基体和纤维断裂是试样被穿孔时有效的损伤模式。     

Low velocity impact and compression after impact characterization of woven carbon/vinylester at dry and water saturated conditions

The low velocity impact response and compression after impact strength of dry and water saturated plain weave carbon/vinylester composites have been determined. The composites employed T700 carbon fibers and vinylester 510A and 8084 resins. Quasi-static impact tests were conducted on dry C/VE510A and C/VE8084 to estimate the threshold impact force required to initiate damage in the composites. Falling-weight impact tests were conducted on the composites over a range of impact energies from 6.7 to 47 J. Destructive inspection of damaged panels revealed damage in the form of matrix cracks as well as delamination between fiber bundles. The quasi-static estimation of the threshold impact force was in reasonable agreement with that measured in the impact test. To examine structural degradation due to impact loading, impacted panels were tested in compression (CAI). The CAI strength decreased with increasing impact energy. Absorbed moisture caused further reductions of the CAI strength.