Synthesis of a novel cross‐linked organophosphorus‐nitrogen containing polymer and its application in flame retardant epoxy resins

A novel cross‐linked organophosphorus–nitrogen polymetric flame retardant additive poly(urea tetramethylene phosphonium sulfate) defined as PUTMPS was synthesized by the condensation polymerization between urea and tetrahydroxymethyl phosphonium sulfate. Its chemical structure was well characterized by Fourier transform infrared (FTIR) spectroscopy, ¹³C and ³¹P solid‐state nuclear magnetic resonance. The synthesized PUTMPS and curing agent m‐phenylenediamine were blended into epoxy resins to prepare flame retardant epoxy resin thermosets. The effects of PUTMPS on fire retardancy and thermal degradation behavior of EP/PUTMPS thermosets were investigated by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter measurement, and thermalgravimetric analysis (TGA) tests. The surface morphologies and chemical compositions of char residues for cured epoxy resins were investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy (XPS), respectively. Water resistant properties of epoxy resin thermosets were evaluated by putting the samples into distilled water at 70°C for 168 h. The results demonstrated that the EP/12 wt% PUTMPS thermosets successfully passed UL‐94 V‐0 flammability rating and the LOI value reached 31.3%. The TGA results indicated that the incorporation of PUTMPS promoted epoxy resin matrix decomposed and char forming ahead of time, which led to a higher char yield and thermal stability for epoxy resin thermosets at high temperature. The morphological structures and analysis of XPS for the char residues of the epoxy resin thermosets shown that PUTMPS benefited to the formation of a sufficient, more compact, and homogeneous char layer with rich flame retardant elements on the materials surface during burning, which prevented the heat transmission and diffusion, limited the production of combustible gases, inhibited the emission of smoke, and then led to the reduction of the heat release rate and smoke produce rate. After water resistance tests, EP/12 wt% PUTMPS thermosets still remained excellent flame retardancy. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of a novel halogen‐free intumescent flame retardant for acrylonitrile‐butadiene‐styrene

A novel intumescent flame retardant (IFR), containing ammonium polyphosphate (APP) and poly(tetramethylene terephthalamide) (PA4T), was prepared to flame‐retard acrylonitrile‐butadiene‐styrene (ABS). The flame retardation of the IFR/ABS composite was characterized by limiting oxygen index (LOI) and UL‐94 test. Thermogravimetric analysis (TGA) and TGA coupled with Fourier transform infrared spectroscopy (TG‐FTIR) were carried out to study the thermal degradation behavior of the composite and look for the mechanism of the flame‐retarded action. The morphology of the char obtained after combustion of the composite was studied by scanning electron microscopy (SEM). It has been found the intumescent flame retardant showed good flame retardancy, with the LOI value of the PA4T/APP/ABS (7.5/22.5/70) system increasing from 18.5 to 30% and passing UL‐94 V‐1 rating. Meanwhile, the TGA and TG‐FTIR work indicated that PA4T could be effective as a carbonization agent and there was some reaction between PA4T and APP, leading to some crosslinked and high temperature stable material formed, which probably effectively promoted the flame retardancy of ABS. Moreover, it was revealed that uniform and compact intumescent char layer was formed after combustion of the intumescent flame‐retarded ABS composite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Phosphorus‐containing epoxy resin for an electronic application

A phosphorus‐containing epoxy resin, 6‐H‐dibenz[c,e][1,2] oxaphosphorin‐6‐[2,5‐bis(oxiranylmethoxy)phenyl]‐6‐oxide (DOPO epoxy resin), was synthesized and cured with phenolic novolac (Ph Nov), 4,4′‐diaminodiphenylsulfone (DDS), or dicyandiamide (DICY). The reactivity of these three curing agents toward DOPO epoxy resin was found in the order of DICY > DDS > Ph Nov. Thermal stability and the weight loss behavior of the cured polymers were studied by TGA. The phosphorus‐containing epoxy resin showed lower weight loss temperature and higher char yield than that of bisphenol‐A based epoxy resin. The high char yields and limiting oxygen index (LOI) values as well as excellent UL‐94 vertical burn test results of DOPO epoxy resin indicated the flame‐retardant effectiveness of phosphorus‐containing epoxy resins. The DOPO epoxy resin was investigated as a reactive flame‐retardant additive in an electronic encapsulation application. Owing to the rigid structure of DOPO and the pendant P group, the resulting phosphorus‐containing encapsulant exhibited better flame retardancy, higher glass transition temperature, and thermal stability than the regular encapsulant containing a brominated epoxy resin. High LOI value and UL‐94 V‐0 rating could be achieved with a phosphorus content of as low as 1.03% (comparable to bromine content of 7.24%) in the cured epoxy, and no fume and toxic gas emission were observed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 353–361, 1999     

Thermal degradation and flame retardance of epoxy resins containing a microencapsulated flame retardant

Two steps were used in the synthesis of a microencapsulated intumescent flame retardant (MIFR). First bis (1‐oxo‐2,6,7‐trioxa‐l‐phosphabicyclo[2.2.2]octane‐4‐methylol) phosphate melaminium salt (Melabis) was synthesized. Then the Melabis was encapsulated with melamine resin to obtain the MIFR. Its structure was characterized by XPS, SEM, and elemental analysis, and the factors affecting microencapsulation were identified and discussed. Epoxy resins (EP) were modified with the MIFR to prepare flame‐retardant EP, whose flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI) tests. The microcapsules (20% by weight) were added to EP in order to achieve an LOI of 29.5% and a UL 94 rating of V‐0. The thermal properties of epoxy resins containing the MIFR were investigated by thermogravimetry (TG) and differential thermogravimetry (DTG). The FR decreased by weight loss, R_max (the maximum weight loss rate), and the thermal stability of EP while promoting the formation of an effective charring layer. The char structures were studied by SEM. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

A novel flame retardant of spirocyclic pentaerythritol bisphosphorate for epoxy resins

A novel flame retardant for epoxy resins, bisdiglycol spirocyclic pentaerythritol bisphosphorate (BDSPBP) was synthesized from the reaction of diglycol with spirocyclic pentaerythritol bisphosphorate diphosphoryl chloride, which was obtained from the reaction of phosphoryl chloride with pentaerythritol. Flammability of the cured epoxy resin systems consisted of diglycidyl ether of bisphenol A (DGEBA), low‐molecular‐weight polyamide and BDSPBP are investigated by vertical burning test (UL‐94) and limiting oxygen index test (LOI). The results indicate that BDSPBP has good flame retardance on epoxy. The thermogravimetric analysis (TGA) shows that the epoxy resin containing BDSPBP has a high yield of residual char at high temperatures, indicating that BDSPBP is an effective charring agent. From the SEM observations of the residues of the flame retardant systems burned, the compact charred layers can be seen, which form protective shields to protect effectively internal structure, and inhibit the transmission of heat and heat diffusion during contacting fire. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4978–4982, 2006     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel flame‐retardant epoxy composites containing aluminium β‐carboxylethylmethylphosphinate

A novel flame‐retardant aluminum β‐carboxylethylmethylphosphinate [Al(CEP)] was synthesizedby a simple process. The effect of Al(CEP) on the curing of epoxy resin (EP) was investigated with differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy. The flame retardancy and thermal properties of Al(CEP)/EP were analyzed by a limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electron microscopy (SEM) with energy‐dispersive X‐ray (EDX), gravimetric analyses, and DSC. Results disclosed that curing of EP is delayed by incorporating Al(CEP). The flexural strength of EP is reduced but the flexural modulus is increased by adding Al(CEP). Adding Al(CEP) depresses the decomposition of EP while leads to a increase in the glass transition temperature (T_g), in char formation and in flame retardancy of EP. EP containing 25 phr Al(CEP) provides LOI of 28.3% and passes UL‐94 V‐0 rating. SEM results show that the sample passing V‐0 rating can form the condensed char whereas porous char is observed from the sample failing in V‐0 rating after combustion. EDX analysis shows that the condensed char presents higher weight ratio of carbon to phosphorus than the porous char, indicating appropriate amount of Al(CEP) is necessary for formation of the stable char. POLYM. ENG. SCI., 55:657–663, 2015. © 2014 Society of Plastics Engineers     

新型磷／氮协同阻燃环氧树脂的合成与性能

以双酚A环氧树脂E－51与DOPO（9,10-dihydrooxa-20－phosph henanthrene－10-oxide）合成含磷环氧树脂（ED）,以三聚氰胺与苯酚反应制备含氮的酚醛固化剂MFP。采用红外光谱对产物进行分析表征,采用热失重分析和UL94V垂直燃烧测试考查树脂的热性能和阻燃性能,同时探讨了阻燃环氧树脂的力学性能。结果表明,随着含磷量的增加,环氧树脂的热稳定性和阻燃性能得到改善,当含磷量为3％时,环氧树脂的初始分解温度高达330℃以上,在700℃下的残炭率达到30％以上,阻燃性能均达到了UL－94 V—0级。而试样的力学性能则随含磷量的增加而降低。     

Synergistic effects of tetrabutyl titanate on intumescent flame‐retarded polypropylene

The synergistic mechanism of tetrabutyl titanate (TBT) in the intumescent flame‐retardant polypropylene (PP) composites was investigated in this work. The intumescent flame‐retardant was composed of pentaerythritol (PER) as a carbonizing agent ammonium polyphosphate (APP) as a dehydrating agent and blowing agent. Five different concentrations (1, 1.25, 1.5, 1.75, 2 wt %) of TBT were incorporated into flame retardant formulation to investigate the synergistic mechanism. The thermal degradation and flammability of composites were characterized by thermogravimetric analysis (TGA), limiting oxygen index (LOI), and UL‐94 tests. The morphology and chemical structure of char layer was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive spectrometer (EDS). The results showed that LOI was increased from 27.8 to 32.5%, with the increase of TBT content from 0 to 1.5 wt %. Results from SEM, and FTIR demonstrated that TBT could react with APP and PER to form the stable char layer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4255–4263, 2013     

Property of intrinsic flame retardant epoxy resin cured by functional magnesium organic composite salt and diethylenetriamine

An efficient intrinsic flame retardants composite was prepared by curing epoxy resin with a functional magnesium organic composite salt (FMOCS, 0.685 ± 0.3 nm) and diethylenetriamine (DETA). Curing behavior, thermal and flame‐retardant properties of the cured epoxy resins were systematically investigated by infrared spectrum (FTIR), thermogravimetric analysis (TGA), vertical burning test (UL‐94) and limited oxygen index (LOI) measurement. It was found that flame retardancy and mechanical properties of the cured composite are significantly enhanced compared with DETA/EP. The LOI of the EP reached to 33%, which is much higher than the DETA/EP (19%) or its IFR composite (31%) in the optimal addition of ammonium polyphosphate (APP, 18.69 wt %), pentaerythritol (PER, 6.21 wt %) and FMOCS (3.50 wt %). Furthermore, the mechanical properties of the composite material measurement results to imply that it can enhance tensile strength (150%) and bending strength (88%) rather than DETA/EP, which were tested by impact testing machine and microcomputer control electron universal testing machines. Copyright © 2016 John Wiley & Sons, Ltd.     

聚苯基甲氧基硅氧烷改性环氧树脂的阻燃性能研究

采用氧指数(LOI),UL-94,热失重(TGA)等手段考察了聚苯基甲氧基硅氧烷(PPMS)改性对环氧树脂(E-20)固化体系阻燃性能的影响.相比未改性环氧体系,当m(E-20)∶m(PPMS)=73∶时,改性环氧体系的LOI由纯E-20环氧树脂的17.5%上升到21.5%;水平火蔓延速率由36.23 mm/min降低到26.60 mm/min;质量损失为5%时的热分解温度由134.7℃上升到163.0℃,750℃时残炭量由0.21%增加到25.79%.此外,还通过红外光谱对燃烧后的残炭结构进行了分析,探讨了相关阻燃机理.     

Flammability and thermal degradation of epoxy acrylate modified with phosphorus‐containing compounds

A series of UV‐curable flame‐retardant resins was obtained by blending phosphate acrylate (BTP) in different ratios with epoxy acrylate resin (EA). The flammability was characterized by limiting oxygen index (LOI), UL 94 flammability rating and cone calorimeter, and the thermal degradation of the flame‐retardant resins was studied using thermo gravimetric analysis (TGA), and real‐time Fourier transform infrared (RTFTIR). The results indicated that the flame‐retardant efficiency increases with the addition of BTP. The heat release rate with the addition of BTP decreases greatly. The TGA data showed that EA/BTP blends have lower initial decomposition temperatures and higher char residues than pure EA, whereas BTP has the lowest initial decomposition temperature and the highest char residue. The RTFTIR study indicates that the EA/BTP blends have lower thermal oxidative stability than the pure EA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Component ratio effects of hyperbranched triazine compound and ammonium polyphosphate in flame‐retardant polypropylene composites

A hyperbranched derivative of triazine group (EA) was synthesized by elimination reaction between ethylenediamine and cyanuric chloride. The different‐mass‐ratio EA and ammonium polyphosphate (APP) were mixed and blended with polypropylene (PP) in a constant amount (25%) to prepare a series of EA/APP/PP composites. The component ratio effect of EA/APP on the flame‐retardant property of the EA/APP/PP composites was investigated using the limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimetry tests. Results indicated that the EA/APP/PP (7.50/17.50/75.00) composite with the appropriate EA/APP mass ratio had the highest LOI, UL94 V‐0 rating, lowest heat release rate, and highest residue yield. These results implied that the appropriate EA/APP mass ratio formed a better intumescent flame‐retardant system and adequately exerted their synergistic effects. Furthermore, average effective combustion heat values revealed that EA/APP flame retardant possessed the gaseous‐phase flame‐retardant effect on PP. Residues of the EA/APP/PP composites were also investigated by scanning electron microscopy, Fourier‐transform infrared, and X‐ray photoelectron spectroscopy. Results demonstrated that the appropriate EA/APP mass ratio can fully interact and lock more chemical constituents containing carbon and nitrogen in the residue, thereby resulting in the formation of a dense, compact, and intumescent char layer. This char layer exerted a condensed‐phase flame‐retardant effect on EA/APP/PP composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41006.     

Flame retardation and thermal degradation of intumescent flame‐retarded polypropylene composites containing spirophosphoryldicyandiamide and ammonium polyphosphate

A novel halogen‐free intumescent flame retardant, spirophosphoryldicyandiamide (SPDC), was synthesized and combined with ammonium polyphosphate (APP) to produce a compound intumescent flame retardant (IFR). This material was used in polypropylene (PP) to obtain IFR‐PP systems whose flammability and thermal behavior were studied by the limiting oxygen index (LOI) test, UL‐94, thermogravimetric analysis, and cone calorimetry. In addition, the mechanical properties of the systems were investigated. The results indicated that the compound intumescent flame retardant showed both excellent flame retardancy and antidripping ability for PP when the two main components of the IFR coexisted in appropriate proportions. The optimum flame retardant formulation was SPDC:APP = 3:1, which gave an LOI value of 38.5 and a UL‐94 V‐0 rating. Moreover, the heat release rate, production of CO, smoke production rate, and mass loss rate of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analysis. The char residues from the cone calorimetry experiments were observed by scanning electron microscopy, which showed that a homogeneous and compact intumescent char layer was formed. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Effect of charring agent THEIC on flame retardant properties of polypropylene

Tris(2‐hydroxyethyl) isocyanurate (THEIC) was used as charring agent and combined with ammonium polyphosphate (APP) to form an intumescent flame retardant (IFR) for polypropylene (PP). The flame retardancy and combustion performance of PP/IFR composite was tested by limiting oxygen index (LOI), UL‐94 vertical burning test and cone calorimeter. The results showed that PP/IFR composite had highest LOI of 34.8 and obtained V‐0 rating when 30 wt % IFR was loaded and mass ratio APP/THEIC was 2 : 1. The peak heat release (PHRR) and total heat release (THR) values of PP composite containing FRs were remarkably reduced compared with that of pure PP. However, water resistant test demonstrated the PP/IFR composite had poor flame retardant durability, both the LOI value and UL‐94 V‐rating decreased when PP/IFR composite was soaked in water at 70°C after 36 h. The degradation process and the char morphology of IFR and PP/IFR composite were investigated by TGA and SEM images. The possible reaction path between APP and THEIC in the swollen process was proposed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41214.     

多羟基结构三嗪成炭剂在膨胀阻燃PP中的应用

以二乙醇胺为侧链,三聚氯氰和哌嗪为主链,采用一锅法制备了一种多羟基三嗪成炭剂(CDP),将其与聚磷酸铵(APP)复配成膨胀阻燃剂(IFR)用于阻燃聚丙烯(PP)。采用垂直燃烧、极限氧指数、热失重分析等手段研究了阻燃PP的阻燃性能和热稳定性,并用扫描电子显微镜(SEM)对炭层形貌进行了研究。结果表明,APP和CDP具有良好的协同阻燃效果,当APP与CDP质量比为2∶1时,协同阻燃效果最优,仅添加20% IFR,即可使PP达到UL94 V–0级别,LOI为29.5%。热失重分析表明该复合材料在800℃具有最高的残炭量,SEM也显示形成了连续致密的炭层。     

Flame Retardancy and Thermal Performance of Polypropylene Treated With the Intumescent Flame Retardant,Piperazine Spirocyclic Phosphoramidate

Piperazine spirocyclic phosphoramidate (PSP), a novel halogen‐free intumescent flame retardant, was synthesized and used to improve the flame retardancy and dripping resistance of polypropylene (PP) combined with ammonium polyphosphate (APP) and a triazine polymer charring‐foaming agent (CFA). The optimum flame‐retardant formulation was PSP:APP:CFA = 3:6:2 (weight ratio). The flammability and thermal behavior of the (intumescent flame‐retardant)‐PP (IFR‐PP) were investigated via limiting oxygen index (LOI), vertical burning tests (UL‐94), thermogravimetric analysis, and cone calorimetry (CONE). The results indicated that the IFR‐PP had both excellent flame retardancy and anti‐dripping ability. The optimum flame‐retardant formulation gave an LOI value of 39.8 and a UL‐94 V‐0 rating to PP. Moreover, both the heat release rate and the total heat release of the IFR‐PP with the optimum formulation decreased significantly relative to those of pure PP, according to the cone calorimeter analyses. The residues of IFR‐PP obtained after CONE tests were observed by scanning electron microscopy, and it was found that the char yield was directly related to the flame retardancy and anti‐dripping behavior of the treated PP. J. VINYL ADDIT. TECHNOL., 20:10–15, 2014. © 2014 Society of Plastics Engineers     

A novel intumescent flame‐retardant epoxy resins system

Pentaerythritol diphosphonate melamine–dicyandiamide–formaldehyde resin salt, a novel macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by IR, NMR and element analysis. The flame retardancy and thermal behavior of a new IFR system for epoxy resin were investigated by LOI, UL‐94 test, TG, and IR. Activation energy for the decomposition of samples was obtained using Kissinger equation. 25% of weight of IFR were doped into epoxy resin to get 27.5 of LOI and UL 94 V‐0. The TG curves and IR spectra show that IFR decreases the initial decomposition temperature and the maximum weight loss rate of epoxy resin, and enhances the thermal stability of epoxy resin at high temperatures and char yield. The activation energy for epoxy resin containing IFR was decreased by 44.8 kJ/mol, which shows that IFR can catalyze decomposition of epoxy resin. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of a novel phosphorus‐containing dicyclopentadiene novolac hardener and its cured epoxy resin with improved thermal stability and flame retardancy

A novel phosphorus‐containing dicyclopentadiene novolac (DCPD‐DOPO) curing agent for epoxy resins, was prepared from 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and n‐butylated dicyclopentadiene phenolic resin (DCPD‐E). The chemical structure of the obtained DCPD‐DOPO was characterized with FTIR, ¹H NMR and ³¹P NMR, and its molecular weight was determined by gel permeation chromatography. The flame retardancy and thermal properties of diglycidyl ether bisphenol A (DGEBA) epoxy resin cured with DCPD‐DOPO or the mixture of DCPD‐DOPO and bisphenol A‐formaldehyde Novolac resin 720 (NPEH720) were studied by limiting oxygen index (LOI), UL 94 vertical test and cone calorimeter (CCT), and differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. It is found that the DCPD‐DOPO cured epoxy resin possess a LOI value of 31.6% and achieves the UL 94 V‐0 rating, while its glass transition temperature (T_g) is a bit lower (133 °C). The T_g of epoxy resin cured by the mixture of DCPD‐DOPO and NPEH720 increases to 137 °C or above, and the UL 94 V‐0 rating can still be maintained although the LOI decreases slightly. The CCT test results demonstrated that the peak heat release rate and total heat release of the epoxy resin cured by the mixture of DCPD‐DOPO and NPEH720 decrease significantly compared with the values of the epoxy resin cured by NPEH720. Moreover, the curing reaction kinetics of the epoxy resin cured by DCPD‐DOPO, NPEH720 or their mixture was studied by DSC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44599.     

Flame‐retardant properties and mechanisms of epoxy thermosets modified with two phosphorus‐containing phenolic amines

Two phosphorus‐containing phenolic amines, a 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO)‐based derivative (DAP) by covalently bonding DOPO and imine (SB) obtained from the condensation of p‐phenylenediamine with salicylaldehyde, and its analog (AP) via the addition reaction between diethyl phosphite and SB, were used to prepare flame‐retardant epoxy resins. The burning behaviors and dynamic mechanical properties of epoxy thermosets were studied by limited oxygen index (LOI) measurement, UL‐94 test, and dynamic mechanical analysis. The flame‐retardant mechanisms of modified thermosets were investigated by thermogravimetric analysis, Py‐GC/MS, Fourier transform infrared, SEM, elemental analysis, and laser Raman spectroscopy. The results revealed that epoxy thermoset modified with DAP displayed the blowing‐out effect during UL‐94 test. With the incorporation of 10 wt % DAP, the modified thermoset showed an LOI value of 36.1% and V‐0 rating in UL‐94 test. The flame‐retardant mechanism was ascribed to the quenching and diluting effect in the gas phase and the formation of phosphorus‐rich char layers in the condensed phase. However, the thermoset modified with 10 wt % AP only showed an LOI value of 25.7% and no rating in UL‐94 test, which was possibly ascribed to the mismatching of charring process with gas emission process during combustion. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43953.