Use of ranked set sampling in nonparametric control charts

Control charts are widely used to identify changes in a production process. Nonparametric or distribution-free charts can be useful when there is a lack of underlying process distribution. A nonparametric exponentially weighted moving average (EWMA) control chart based on sign test using ranked set sampling (RSS) is proposed to monitor the possible small shifts in the process mean. The performance of the proposed chart is evaluated in terms of average run length, median run length, and standard deviation of the run length distribution. It has been observed that the proposed version of the EWMA sign chart, using RSS shows better detection ability than that version of the EWMA sign chart and the parametric EWMA control chart using simple random sampling scheme. An application with real data-set is also provided to explain the proposal for practical considerations.     

Improved p charts to monitor process quality

It is a common practice to monitor the fraction p of non-conforming units to detect whether the quality of a process improves or deteriorates. Users commonly assume that the number of non-conforming units in a subgroup is approximately normal, since large subgroup sizes are considered. If p is small this approximation might fail even for large subgroup sizes. If in addition, both upper and lower limits are used, the performance of the chart in terms of fast detection may be poor. This means that the chart might not quickly detect the presence of special causes. In this paper the performance of several charts for monitoring increases and decreases in p is analyzed based on their Run Length (RL) distribution. It is shown that replacing the lower control limit by a simple runs rule can result in an increase in the overall chart performance. The concept of RL unbiased performance is introduced. It is found that many commonly used p charts and other charts proposed in the literature have RL biased performance. For this reason new control limits that yield an exact (or nearly) RL unbiased chart are proposed.     

Investigating the Impact of Ranked Set Sampling in Nonparametric CUSUM Control Charts

Nonparametric control charts can be useful as an alternative in practice to the data expert when there is a lack of knowledge about the underlying distribution. In this study, a nonparametric cumulative sum (CUSUM) sign control chart for monitoring and detecting possible deviation from the process mean using ranked set sampling is proposed. Ranked set sampling is an effective method when the observations are inexpensive, and measurements are perhaps destructive. The average run length is used as performance measure for the proposed nonparametric CUSUM sign chart. Simulation study shows that the proposed version of the CUSUM sign chart using ranked set sampling generally outperforms than that version of the nonparametric CUSUM sign chart and the parametric CUSUM control chart using simple random sampling scheme. An illustrative example is also provided for practical consideration. Copyright © 2016 John Wiley & Sons, Ltd.     

An Efficient Nonparametric EWMA Wilcoxon Signed‐Rank Chart for Monitoring Location

The statistical performance of traditional control charts for monitoring the process shifts is doubtful if the underlying process will not follow a normal distribution. So, in this situation, the use of a nonparametric control charts is considered to be an efficient alternative. In this paper, a nonparametric exponentially weighted moving average (EWMA) control chart is developed based on Wilcoxon signed‐rank statistic using ranked set sampling. The average run length and some other associated characteristics were used as the performance evaluation of the proposed chart. A major advantage of the proposed nonparametric EWMA signed‐rank chart is the robustness of its in‐control run length distribution. Moreover, it has been observed that the proposed version of the EWMA signed‐rank chart using ranked set sampling shows better detection ability than some of the competing counterparts including EWMA sign chart, EWMA signed‐rank chart, and the usual EWMA control chart using simple random sampling scheme. An illustrative example is also provided for practical consideration. Copyright © 2016 John Wiley & Sons, Ltd.     

Robust kernel distance multivariate control chart using support vector principles

It is important to monitor manufacturing processes in order to improve product quality and reduce production cost. Statistical Process Control (SPC) is the most commonly used method for process monitoring, in particular making distinctions between variations attributed to normal process variability to those caused by ‘special causes’. Most SPC and multivariate SPC (MSPC) methods are parametric in that they make assumptions about the distributional properties and autocorrelation structure of in-control process parameters, and, if satisfied, are effective in managing false alarms/-positives and false-negatives. However, when processes do not satisfy these assumptions, the effectiveness of SPC methods is compromised. Several non-parametric control charts based on sequential ranks of data depth measures have been proposed in the literature, but their development and implementation have been rather slow in industrial process control. Several non-parametric control charts based on machine learning principles have also been proposed in the literature to overcome some of these limitations. However, unlike conventional SPC methods, these non-parametric methods require event data from each out-of-control process state for effective model building. The paper presents a new non-parametric multivariate control chart based on kernel distance that overcomes these limitations by employing the notion of one-class classification based on support vector principles. The chart is non-parametric in that it makes no assumptions regarding the data probability density and only requires ‘normal’ or in-control data for effective representation of an in-control process. It does, however, make an explicit provision to incorporate any available data from out-of-control process states. Experimental evaluation on a variety of benchmarking datasets suggests that the proposed chart is effective for process monitoring.     

An extended nonparametric homogeneously weighted moving average sign control chart

Parametric (or traditional) control charts are based on the assumption that the quality characteristic of interest follows a specific distribution. However, in many applications, there is a lack of knowledge about the underlying distribution. To this end, nonparametric (or distribution-free) control charts have been developed in recent years. In this article, a nonparametric double homogeneously weighted moving average (DHWMA) control chart based on the sign statistic is proposed for monitoring the location parameter of an unknown and continuous distribution. The performance of the proposed chart is measured through the run-length distribution and its associated characteristics by performing Monte Carlo simulations. The DHWMA sign chart is compared with other nonparametric sign charts, such as the homogeneously weighted moving average, generally weighted moving average (GWMA), double GWMA, and triple exponentially weighted moving average sign charts, as well as the traditional DHWMA chart. The results indicate that the proposed chart performs just as well as and in some cases better than its competitors, especially for small shifts. Finally, two examples are provided to show the application and implementation of the proposed chart.     

Enhancing the Performance of Combined Shewhart‐EWMA Charts

The combination of Shewhart control charts and an exponentially weighted moving average (EWMA) control charts to simultaneously monitor shifts in the mean output of a production process has proven very effective in handling both small and large shifts. To improve the sensitivity of the control chart to detect off‐target processes, we propose a combined Shewhart‐EWMA (CSEWMA) control chart for monitoring mean output using a more structured sampling technique, i.e. ranked set sampling (RSS) instead of the traditional simple random sampling. We evaluated the performance of the proposed charts in terms of different run length (RL) properties including average RL, standard deviation of the RL, and percentile of the RL. Comparisons of these charts with some existing control charts designed for monitoring small, large, or both shifts revealed that the RSS‐based CSEWMA charts are more sensitive and offer better protection against all types of shifts than other schemes considered in this study. Copyright © 2012 John Wiley & Sons, Ltd.     

Monitoring process variation using modified EWMA

A new control chart, namely, modified exponentially weighted moving average (EWMA) control chart, for monitoring the process variance is introduced in this work by following the recommendations of Khan et al.¹⁵ The proposed control chart deduces the existing charts to be its special cases. The necessary coefficients, which are required for the construction of modified EWMA chart, are determined for various choices of sample sizes and smoothing constants. The performance of the proposed modified EWMA is evaluated in terms of its run length (RL) characteristics such as average RL and standard deviation of RL. The efficiency of the modified EWMA chart is investigated and compared with some existing control charts. The comparison reveals the superiority of proposal as compared with other control charts in terms of early detection of shift in process variation. The application of the proposal is also demonstrated using a real-life dataset.     

A new nonparametric double exponentially weighted moving average control chart

There are many practical situations where the underlying distribution of the quality characteristic either deviates from normality or it is unknown. In such cases, practitioners often make use of the nonparametric control charts. In this paper, a new nonparametric double exponentially weighted moving average control chart on the basis of the signed-rank statistic is proposed for monitoring the process location. Monte Carlo simulations are carried out to obtain the run length characteristics of the proposed chart. The performance comparison of the proposed chart with the existing parametric and nonparametric control charts is made by using various performance metrics of the run length distribution. The comparison showed the superiority of the suggested chart over its existing parametric and nonparametric counterparts. An illustrative example for the practical implementation of the proposed chart is also provided by using the industrial data set.     

A Flexible and Generalized Exponentially Weighted Moving Average Control Chart for Count Data

The Conway–Maxwell–Poisson distribution can be used to model under‐dispersed or over‐dispersed count data. This study proposes a flexible and generalized attribute exponentially weighted moving average (EWMA), namely GEWMA, control chart for monitoring count data. The proposed EWMA chart is based on the Conway–Maxwell–Poisson distribution. The performance of the proposed chart is evaluated in terms of run length (RL) characteristics such as average RL, median RL, and standard deviation of the RL distribution. The average RL of the proposed GEWMA chart is compared with Sellers chart. The sensitivity of the standard Poisson EWMA (PEWMA) chart is also studied and compared with the proposed GEWMA chart for under‐dispersed or over‐dispersed data. It has been observed that the PEWMA chart is very sensitive for under‐dispersed or over‐dispersed data while the proposed GEWMA is very robust. Finally, the generalization of the proposed chart to the Bernoulli EWMA, PEWMA, and geometric EWMA charts is also studied using someone simulated data sets. Copyright © 2013 John Wiley & Sons, Ltd.     

A sensitive non-parametric EWMA control chart

In practice, we may not always have normally distributed quality characteristics of interest. This leads to the need for non-parametric techniques which are not dependent on the assumptions about the parent distribution. This study develops a non-parametric exponentially weighted moving average (EWMA) chart (namely the NPSS_EWMA chart) for an improved monitoring of process location. The proposal is based on the use of sign statistics on a moving pattern in an EWMA setup. The design structure of the proposed chart is developed and its performance is evaluated in terms of different properties including average run length (ARL), standard deviation run length (SDRL), percentiles, relative ARL (RARL), extra quadratic loss (EQL), and performance comparison index (PCI). The proposal is compared with recently developed non-parametric counterparts namely NPS_EWMA, NPAS_EWMA, and NPS_CUSUM charts. It is observed that the design structure of the proposed NPSS_EWMA chart outshines the existing counterparts. An application example is also included in the study for practical demonstration.     

Nonparametric Synthetic Control Charts for Process Variation

In this article, we propose nonparametric synthetic and side‐sensitive synthetic control charts for controlling fraction nonconforming due to increase in the process variation. Synthetic control chart is a combination of sign and conforming run length control charts. We compare performance of the proposed control charts with the Shewhart sign and S² charts. Our performance study shows that the proposed control charts have a higher power of detecting out‐of‐control signal. We also study the steady‐state behavior of a nonparametric synthetic control chart. We present a Markov chain model to evaluate the steady‐state average run length of the synthetic and side‐sensitive synthetic control charts. Copyright © 2011 John Wiley & Sons, Ltd.     

MaxEWMA Control Chart for a Weibull Process with Individual Measurements

To monitor a Weibull process with individual measurements, some methods such as power transformation, inverse erf function, and Box–Cox transformation have been used to transform the Weibull data to a normal distribution. In this study, we conduct a simulation study to compare their performances in terms of the bias and mean square errors. A practical guide is recommended. Additionally, we present the maximum exponentially weighted moving average chart based on the transformation method to monitor a Weibull process with individual measurements. We compare the average run lengths of the proposed chart and the combined individual and moving range charts under the three cases including mean changes, sigma changes, and both mean and sigma changes. It is shown that the proposed control chart outperforms the combined individual and moving range charts for all three cases. Moreover, two examples are used to illustrate the applicability of the proposed control chart. Copyright © 2016 John Wiley & Sons, Ltd.     

A New Chart for Monitoring Service Process Mean

Control charts are demonstrated effective in monitoring not only manufacturing processes but also service processes. In service processes, many data came from a process with nonnormal distribution or unknown distribution. Hence, the commonly used Shewhart variable control charts are not suitable because they could not be properly constructed. In this article, we proposed a new mean chart on the basis of a simple statistic to monitor the shifts of the process mean. We explored the sampling properties of the new monitoring statistic and calculated the average run lengths of the proposed chart. Furthermore, an arcsine transformed exponentially weighted moving average chart was proposed because the average run lengths of this modified chart are more intuitive and reasonable than those of the mean chart. We would recommend the arcsine transformed exponentially weighted moving average chart if we were concerned with the proper values of the average run length. A numerical example of service times with skewed distribution from a service system of a bank branch in Taiwan is used to illustrate the proposed charts. Copyright © 2011 John Wiley & Sons, Ltd.     

Nonparametric signed‐rank control charts with variable sampling intervals

Variable sampling interval (VSI) charts have been proposed in the literature for normal theory (parametric) control charts and are known to provide performance enhancements. In the VSI setting, the time between monitored samples is allowed to vary depending on what is observed in the current sample. Nonparametric (distribution‐free) control charts have recently come to play an important role in statistical process control and monitoring. In this paper a nonparametric Shewhart‐type VSI control chart is considered for detecting changes in a specified location parameter. The proposed chart is based on the Wilcoxon signed‐rank statistic and is called the VSI signed‐rank chart. The VSI signed‐rank chart is compared with an existing fixed sampling interval signed‐rank chart, the parametric VSI ‐chart, and the nonparametric VSI sign chart. Results show that the VSI signed‐rank chart often performs favourably and should be used.     

A new non‐parametric CUSUM mean chart

Not all data in practice came from a process with normal distribution. When the process distribution is non‐normal or unknown, the commonly used Shewhart control charts are not suitable. In this paper, a new non‐parametric CUSUM Mean Chart is proposed to monitor the possible small mean shifts in the process. The sampling properties of the new monitoring statistics are examined and the average run lengths of the proposed chart are examined. Two numerical examples are used to illustrate the proposed chart and compare with the two existing charts, assuming normality and Beta distribution, respectively. The CUSUM Mean Chart showed better detection ability than those two charts in monitoring and detecting small process mean shifts. Copyright © 2010 John Wiley & Sons, Ltd.     

Detecting changes in location using distribution‐free control charts with big data

This paper proposes a simple distribution‐free control chart for monitoring shifts in location when the process distribution is continuous but unknown. In particular, we are concerned with big data applications where there are sufficient in‐control data that can be used to specify certain quantiles of interest which, in turn, are used to assess whether the new, incoming data to be monitored are in control. The distribution‐free chart is shown to lose very little power against the Shewhart charts designed for normally distributed data. The proposed charts offer a practical and robust alternative to the classical Shewhart charts which assume normality, particularly when monitoring quantiles and the data distribution is skewed. The effect of the size of the reference sample is examined on the assumption that the quantiles are known. Conclusions and recommendations are offered.     

The modified control charts for monitoring the shape parameter of weighted power function distribution under classical estimator

Zaka et al provided a new distribution called the Weighted Power function distribution (WPFD), which has application in reliability engineering and survival analysis. They used different estimation methods to estimate the unknown parameters of WPFD and proved that modified maximum likelihood estimator (MMLE) is best to consider for the estimation of parameters. We have constructed the memoryless and memory-based control charts based on the assumption that the distribution of the underlying process does not follow the normal distribution. In this paper, we provide modified control charts using MMLE of the shape parameter for WPFD. We develop control charts to keep the process in control when the distribution of errors of underlying process follows WPFD. We propose the modified memoryless control chart, that is, Shewhart control chart and modified memory-based control chart, that is, Exponentially weighted moving average (EWMA) and Hybrid exponentially weighted moving average (HEWMA) control charts. We have made the comparison of the proposed control charts using Monte Carlo simulation and the real-life application for both and the memoryless control charts and memory-based control charts. We see that HEWMA based on MMLE performs better as compared to other proposed control charts.     

A double exponentially weighted moving average chart based on likelihood ratio for monitoring an inflated Pareto process

In this paper, we present a new chart called a likelihood ratio based double exponentially weighted moving average (LR_DEWMA) chart to monitor the shape parameter of the inflated Pareto process. Three other control charts such as the Shewhart type, the classical cumulative sum (CUSUM), and the likelihood ratio based EWMA (LR_EWMA) charts are also investigated. The performance of the control charts is evaluated by the average run length (ARL) and standard deviation of run lengths (SDRL) computed through the Monte Carlo simulation approach. Moreover, the median run length (MRL) and some other run length (RL) percentiles are also considered in some cases. Different charts have shown the best performance in different cases. In detecting smaller shifts, while the LR_DEWMA chart outperformed the other charts in terms of ARL and MRL, the CUSUM chart has shown the best performance in terms of SDRL and IQR of RLs. The application of the proposed control charts is illustrated using a chromatography analyses data from the food industry.     

A double homogeneously weighted moving average control chart for monitoring of the process mean

In the service and manufacturing industry, memory-type control charts are extensively applied for monitoring the production process. These types of charts have the ability to efficiently detect disturbances, especially of smaller amount, in the process mean and/or dispersion. Recently, a new homogeneously weighted moving average (HWMA) chart has been proposed for efficient monitoring of smaller shifts. In this study, we have proposed a new double HWMA (DHWMA) chart to monitor the changes in the process mean. The run length profile of the proposed DHWMA chart is evaluated and compared with some existing control charts. The outcomes reveal that the DHWMA chart shows better performance over its competitor charts. The effect of non-normality (in terms of robustness) and the estimation of the unknown parameters on the performance of the DHWMA chart are also investigated as a part of this study. Finally, a real-life industrial application is offered to demonstrate the proposal for practical considerations.