All-inkjet-printed low-pass filters with adjustable cutoff frequency consisting of resistors,inductors and transistors for sensor applications

Low-cost and flexible first and second order low-pass filters with adjustable cutoff frequency were designed and printed by inkjet printing technology. The all-inkjet-printed low-pass filters were characterized and an adjustable cutoff frequency feature in form of an inkjet-printed organic thin-film transistors (OTFTs) was added to the filters for application-oriented fine-tuning. The applicability of these small circuits was evaluated by signal filtering for sensor applications. As a result, low-pass filters with an adjustable cutoff frequency ranging from 82 Hz to 740 Hz were obtained, demonstrating their suitability in signal filtering and their promising applicability for tactile sensing characterized by low frequency signals.     

A CMOS transconductance-C filter technique for very highfrequencies

CMOS circuits for integrated analog filters at very high frequencies, based on transconductance-C integrators, are presented. First a differential transconductance element based on CMOS inverters is described. With this circuit a linear, tunable integrator for very-high-frequency integrated filters can be made. This integrator has good linearity properties and nondominant poles in the gigahertz range owing to the absence of internal nodes. The integrator has a tunable DC gain, resulting in a controllable integrator quality factor. Experimental results of a VHF CMOS transconductance-C low-pass filter realized in a 3-μm CMOS process are given. Both the cutoff frequency and the quality factors can be tuned. The cutoff frequency was tuned from 22 to 98 MHz and the measured filter response is very close to the ideal response of the passive prototype filter. Furthermore, a novel circuit for automatically tuning the quality factors of integrated filters built with these transconductors is described     

Current-mode continuous-time filters using complementary current mirror pairs

A design of current-mode continuous-time filters for low voltage and high frequency applications using complementary bipolar current mirror pairs is presented. The proposed current-mode filters consist of simple bipolar current mirrors and capacitors and are quite suitable for monolithic integration. Since the filters are based on the integrator type of realization, the proposed method can be used for a wide range of applications. The frequency of the filters can easily be changed by the DC controlling current. A fifth-order Butterworth and a third-order leapfrog filter with tunable cutoff frequencies from 20 MHz to 100 MHz are designed as examples and simulated by SPICE using standard bipolar parameters.     

Precise Design of Coaxial Low-Pass Filters

The coaxial low-pass filters described are of the conventional stepped impedance type consisting of a cascade of alternating low and high impedance sections of line. Exact prototype filters having Chebyshev equal-ripple characteristics are obtained from published tables giving the characteristic impedances of the sections. The capacitive discontinuities at the junctions are compensated by a new method which is exact at the cutoff frequency, and nearly exact in the region of this frequency. The production of low-pass filters with a passband VSWR of 1.05 or less is feasible and experimental results are described for such designs.     

Improved narrowband low-pass IIR filters in fixed-point systems [DSP Tips & Tricks]

Due to their resistance to quantized-coefficient errors, traditional second-order infinite impulse response (IIR) filters are the fundamental building blocks in computationally efficient high-order IIR digital filter implementations. However, when used in fixed-point number systems, the inherent properties of quantized-coefficient second-order IIR filters do not readily permit their use in narrowband low-pass filtering applications. Narrowband lowpass IIR filters have traditionally had a bad reputation; for example, MATLAB's Signal Processing Toolbox documentation warns: "All classical IIR low-pass filters are ill conditioned for extremely low cutoff frequencies."     

用对数域电流模式积分器实现的高频集成滤波器

文本提出了全差动对数域电流模式积分器．该积分器的时间常数受参考偏流控制,其直流增益可达60dB,在高频它具有比较平坦的相频特性。用该积分器设计的二阶滤波器和1dB波纹五阶Chebyshev低通滤波器,计算机仿真显示,“实际”频响特性几乎是理想的．且频率可在很宽的范围内调控．这种滤波器具有很低的THD。     

Differential current-mode tunable wave active filters based on single-ended wave port terminators

A method for the design of differential current-mode wave active filters, which is based on the use of single-ended wave port terminators, is presented in this paper. The resulting filters are modular and very simple to design while their cutoff frequency is controlled by a dc current, giving them the ability of frequency tuning. As an example a wide-band bandpass filter is realized by cascading a low-pass and a highpass filter. The overall filter has been integrated using a standard 0.35-/spl mu/m CMOS technology.     

用Multisim分析二阶低通滤波器电路

以Multisim为平台分析了二阶低通滤波器电路。使用虚拟示波器等虚拟元件,采用交流分析方法和参数扫描分析方法仿真分析了二阶低通滤波器电路的工作特性,及各元件参数对输入输出特性的影响,并演示了Multisim中虚拟仪器及各种分析方法的使用。仿真得到了该电路在低频状态下的通带电压放大倍数AUP=2,电路的截止频率fP=148.495 2 Hz。仿真结果与理论计算相符。     

Low Voltage Micropower Log-Domain Filters

A design technique for low-voltage, micropower continuous-time filters implementing CMOS devices operating in weak inversion is presented. The basic building block is the CMOS log-domain integrator. The effects of the MOS device nonidealities on the integrator are investigated and verified by HSPICE simulations. A 5th-order Chebyshev lowpass ladder filter was designed and simulated. The filter operates with low supply voltage of 1.5 V to achieve a cutoff frequency tunable range of 100 Hz–100 kHz, and it has a power dissipation of 254 nW/pole at the cutoff frequency of 100 kHz. The filter was laid out using the 0.35-m mixed-mode polycide CMOS technology and occupies a die area of 0.04 mm² without the i/o pads     

Frequency-response equalization in integrated current amplifiers with collector—base cross coupling

It is shown that monolithic current amplifiers with collector-base cross coupling can ensure a single-stage amplification up to 40 dB in the frequency range from 0 to 0.1f_c (wheref _c is the cutoff frequency of the transistors). This is possible if the effect of intrinsic positive feedback and a parasitic low-pass filter is suppressed. The equalization procedure is described.     

基于齿状缺陷地的宽阻带交叉耦合SIW滤波器

提出了一种齿状缺陷地低通传输线结构,该低通传输线由多级齿状缺陷地构成,通过调节齿状缺陷地枝节长度,可以有效调节低通和阻带频率范围。利用该齿状缺陷地结构,级联交叉耦合扇形基片集成波导(SIW)滤波器,该文设计了一款高带外抑制的宽阻带滤波器,与传统SIW带通滤波器相比,其矩形系数K_{40 dB}=2,阻带范围大于2倍的中心频率,具有较好的通带和阻带选择特性。测试结果表明,滤波器的中心频率为10.35 GHz,3 dB和40 dB带宽分别为507 MHz和1.05 GHz,插入损耗优于1.47 dB,与仿真结果基本一致。     

基于MMIC工艺的片上射频LC无源滤波器

设计、制作了几种基于MMIC工艺的片上LC低通/带通滤波器并进行了测试. 测试结果表明,一个3nH的MMIC电感在6.8GHz下品质因数达到13.8,自谐振频率达到15.5GHz;制作的LC低通/带通滤波器的截止频率或中心频率与设计偏差很小,分别为2%和3.3%;低通滤波器在各自通带内的插入损耗小于3dB,带通滤波器在中心频率的插入损耗为7.2dB.     

Realization of Tunable Pole-Q Current-Mode OTA-C Universal Filter

A realization of a current-mode operational transconductance amplifier-capacitor (OTA-C) universal filter with tunable pole-Q is proposed. A biquadratic band-reject function is used as the initial synthesis function based on three integrator blocks. Consequently, the proposed filter uses a total of three multiple-output OTAs and three grounded capacitors. Five types of transfer functions, namely, low-pass, high-pass, band-pass, band-reject, and all-pass responses, can be obtained without changing the circuit topology. The pole-Q (Q ₀) and the pole-frequency (ω ₀) parameters are independently tuned. The Q ₀ and ω ₀ parameters are electronically tuned by adjusting the transconductance gains of the OTAs. Furthermore, Q ₀ can be tuned by varying the capacitor manually without affecting ω ₀. SPICE simulation results of the proposed filter are presented.     

Variable cut-off digital ladder filters

This paper presents a now class of transformations whose implementation to doubly terminated LC ladder filters results in variable cut-off frequency digital filters. It is shown that using this transformation and the concept of generalized delay, from a given prototype ladder structure, we can construct low-pass, high-pass, band-pass and band-stop filters with variable cut-off frequency and bandwidth. Thu resulting variable filters are canonical in the sense that a minimum number of multipliers in the prototype filter need to be adjusted. Two examples are worked out to illustrate the application of this method.     

Quasi-static design technique for MM-wave micromachined filterswith lumped elements and series stubs

This paper describes micromachined, membrane-supported low-pass and bandpass filters which are suitable for microwave and millimeter-wave (MM-wave) application. The designs are realized in coplanar-waveguide (CPW) form using short- and open-end series stubs with integrated metal-insulator-metal (MIM) capacitors, and are compact in lateral and longitudinal dimensions. A computationally efficient analysis has been developed for the design and characterization of the filters. The technique is based on a quasi-static coupled-line (CL) treatment of the series stubs, and uses normal mode impedance parameters, which are calculated with the spectral-domain approach (SDA). Due to the broad TEM-bandwidth of the membrane-supported transmission lines, the method can accurately predict filter responses well into the rejection band. To demonstrate the above claims, the measured and simulated S-parameters of a 0.3 mm ×2.2 mm low-pass filter with a cutoff frequency at 17 GHz, and a second passband at 115 GHz, are presented. The new approach is also used in the design of bandpass filters which exhibit 1.5-2-dB insertion loss and bandwidths around 10%     

MOS switched capacitor ladder filters

A new technique for designing precision, fully integrated, high-order filters using standard MOS technology is described. Switched capacitor integrators have been used to realize long time constants in small areas, and by interconnecting these integrators in a `leapfrog' configuration, monolithic high-order filters have been implemented with transfer functions that are very insensitive to component variations. Experimental results are presented for an NMOS fifth-order Chebyshev low-pass ladder filter with 0.1-dB passband ripple, a cutoff frequency of 3.4 kHz when clocked at 128 kHz, and a dynamic range of 83 dB. An efficient method for implementing transmission zeros is also presented, along with a complete design example, and additional experimental results for a third-order elliptic low-pass ladder filter which achieved 90-dB dynamic range, with a total power dissipation of 18 mW in a die area of 4400 mil/SUP 2/.     

High output impedance current-mode lowpass,bandpass and highpass filters using current controlled conveyors

Three new current-mode second-order filter configurations which employ one or two current controlled conveyors (CCCIIs) and three passive elements are presented. Each proposed filter can realize one of the bandpass, lowpass or highpass responses all at high impedance outputs. The proposed filters offer current-control of pole angular frequency ω_o without disturbing the parameter ω_o /Q. No component matching is required and all the passive and active sensitivities are low. PSPICE simulation results are given to confirm the theoretical analysis.     

Miniature and tunable millimeter-wave lowpass filter with MEMS switch

In this paper, fully monolithic tunable millimeter-wave filters with tapped-line feedings are proposed using the CPW-based periodic structures with novel multiple-contact MEMS switches. Millimeter-wave low-pass filters were designed, fabricated, and tested. The cascaded CPW-based periodic structures, with low-pass intrinsic filtering characteristics, are reconfigured into a self-similar single unit cell by the operation of the novel multiple-contact MEMS switches with single actuation. The measured results of the reconfigurable low-pass filter show the 3-dB cutoff frequency change from 19 to 11 GHz with very small change in the average insertion loss from 1.3 to 1.9 dB. The chip size of the low-pass is 4.0 mm × 1.6 mm.     

A 3-V continuous-time filter with on-chip tuning for IS-95

This paper describes a low-voltage channel selection analog front end with continuous-time low-pass filters and on-chip tuning for a receiver in an IS-95 cellular phone. The filters were realized as balanced seventh-order elliptical g_mC filters to achieve low current consumption. The transconductors were realized by using second-generation current conveyors (CCII) and resistors to achieve good intermodulation distortion performance. A novel CCII circuit topology was developed to fulfil the low supply-voltage requirement. The cutoff frequency tuning was implemented with capacitance matrices and a time-domain master-slave tuning circuit     

Versatile current-mode biquadratic circuit using only plus type CCCIIs and grounded capacitors

This paper introduces a versatile current-mode biquadratic circuit using second generation current-controlled current conveyors (CCCIIs). The circuit is constructed with two plus type multiple current output CCCIIs (MO-CCCIIs) and two grounded capacitors. The circuit can realize low-pass, band-pass, high-pass, band-stop and all-pass transfer functions by choosing appropriate input and output terminals without any component matching conditions. Additionally, the circuit parameters Q and ω₀ can be set orthogonally by adjusting the bias currents of the MO-CCCIIs and grounded capacitors. The biquadratic circuit enjoys very low sensitivities to the circuit components.

Some examples are given together with simulated results by PSPICE.