Assessment of the Turkish utility sector through energy and exergy analyses

The present study deals with evaluating the utility sector in terms of energetic and exergetic aspects. In this regard, energy and exergy utilization efficiencies in the Turkish utility sector over a wide range of period from 1990 to 2004 are assessed in this study. Energy and exergy analyses are performed for eight power plant modes, while they are based on the actual data over the period studied. Sectoral energy and exergy analyses are conducted to study the variations of energy and exergy efficiencies for each power plants throughout the years, and overall energy and exergy efficiencies are compared for these power plants. The energy utilization efficiencies for the overall Turkish utility sector range from 32.64% to 45.69%, while the exergy utilization efficiencies vary from 32.20% to 46.81% in the analyzed years. Exergetic improvement potential for this sector are also determined to be 332 PJ in 2004. It may be concluded that the methodology used in this study is practical and useful for analyzing sectoral and subsectoral energy and exergy utilization to determine how efficient energy and exergy are used in the sector studied. It is also expected that the results of this study will be helpful in developing highly applicable and productive planning for energy policies.     

An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia

The purpose of this work is to apply the useful energy and exergy analysis models for different modes of transport in Malaysia and to compare the result with a few countries. In this paper, energy and exergy efficiencies of the various sub-sectors are presented by considering the energy and exergy flows from 1995 to 2003. Respective flow diagrams to find the overall energy and exergy efficiencies of Malaysian transportation sector are also presented. The estimated overall energy efficiency ranges from 22.74% (1999) to 22.98% (1998) with a mean of 22.82±0.06%$22.82\pm 0.06\%$ and that of overall exergy efficiency ranges from 22.44% (2000) to 22.82% (1998) with a mean of 22.55±0.12%$22.55\pm 0.12\%$. The results are compared with respect to present energy and exergy efficiencies in each sub-sector. The transportation sector used about 40% of the total energy consumed in 2002. Therefore, it is important to identify the energy and exergy flows and the pertinent losses. The road sub-sector has appeared to be the most efficient one compared to the air and marine sub-sectors. Also found that the energy and exergy efficiencies of Malaysian transportation sector are lower than that of Turkey but higher than Norway.     

Performance and parametric investigation of a binary geothermal power plant by exergy

Exergy analysis of a binary geothermal power plant is performed using actual plant data to assess the plant performance and pinpoint sites of primary exergy destruction. Exergy destruction throughout the plant is quantified and illustrated using an exergy diagram, and compared to the energy diagram. The sites with greater exergy destructions include brine reinjection, heat exchanger and condenser losses. Exergetic efficiencies of major plant components are determined in an attempt to assess their individual performances. The energy and exergy efficiencies of the plant are 4.5% and 21.7%, respectively, based on the energy and exergy of geothermal water at the heat exchanger inlet. The energy and exergy efficiencies are 10.2% and 33.5%, respectively, based on the heat input and exergy input to the binary Rankine cycle. The effects of turbine inlet pressure and temperature and the condenser pressure on the exergy and energy efficiencies, the net power output and the brine reinjection temperature are investigated and the trends are explained.     

Energy and exergy utilization efficiencies in the Japanese residential/commercial sectors

Unlike the manufacturing sector, the residential/commercial sectors of Japan struggle to meet their environmental requirements. For instance, their CO₂ emission levels have increased tremendously since 1990. This research estimates energy and ‘exergy (available energy)’ efficiencies in Japan's residential/commercial sectors during the period 1990–2006. Since an exergy analysis reveals ‘available energy losses’, it is an effective tool to achieve sustainable societies. The primary objective of this paper is to examine the potential for advancing the ‘true’ energy efficiency in Japan's residential/commercial sectors—by observing energy and exergy efficiency disparities. The results show large differences between the overall energy and exergy efficiencies in the residential (60.12%, 6.33%)/commercial sectors (51.78%, 5.74%) in 2006. This implies great potential for energy savings in both sectors. Furthermore, this research suggests that the residential sector may face more difficulties than the commercial sector, although the latter appears to be less energy-efficient, according to recent statistics. This is because the disparity between energy and exergy efficiencies has expanded in the residential sector since 2000. This study illustrates the importance of exergy analyses in promoting sustainable energy policies and new adaptation strategies.     

An application of energy and exergy analysis in agricultural sector of Malaysia

Thermodynamic losses usually take place in machineries used for agricultural activities. Therefore, it is important to identify and quantify the losses in order to devise strategies or policies to reduce them. An exergy analysis is a tool that can identify the losses occurred in any sector. In this study, an analysis has been carried out to estimate energy and exergy consumption of the agricultural sector in Malaysia. Energy and exergy efficiencies have been determined for the devices used in the agricultural sector of Malaysia, where petrol, diesel and fuel oil are used to run the machineries. Energy and exergy flow diagrams for the overall efficiencies of Malaysian agricultural sector are presented as well. The average overall energy and exergy efficiencies of this sector were found to be 22% and 20.728%, respectively, within the period from 1991 to 2009. These figures were found to be lower than those of Norway but higher than Turkey.     

Turkey's sectoral energy and exergy analysis between 1999 and 2000

This study analyses sectoral energy and exergy utilization in Turkey between 1999 and 2000. Total energy and exergy utilization efficiencies are calculated to be 43.24 and 24.04% in 1999, and 44.91 and 24.78% in 2000, respectively. In order to calculate these efficiency values, Turkey is subgrouped into four main sectors, namely utility, industrial, transportation and commercial‐residential. The energy efficiency values are found to be 23.88, 30.10, 68.97 and 57.76% in 1999, and 23.71, 30.11, 68.81 and 57.05% in 2000 for transportation, utility, industrial and commercial‐residential sectors, respectively. Besides this, the exergy efficiency values are obtained to be 23.80, 30.28, 35.97 and 8.12% in 1999, and 23.65, 30.47, 35.51 and 8.02% in 2000 for the same order of sectors. The present study has clearly shown the necessity of the planned studies towards increasing exergy efficiencies in the sectors studied. Copyright © 2004 John Wiley & Sons, Ltd.     

An application of energy and exergy analysis in residential sector of Malaysia

In this paper, the useful concept of energy and exergy utilization is defined, analyzed and applied to the residential sector of Malaysia by taking into account the energy and exergy flows for a period of 8 years from the year 1997 to 2004. The energy and exergy efficiencies are determined for the devices used in this sector and found to be 70% and 28%, respectively. Energy and exergy flow diagrams for the overall efficiencies of Malaysian residential sector are also illustrated in this paper. It is found that the current methodology applied in Saudi Arabia is suitable to analyze energy and exergy use in Malaysian residential sector. It has been found that the exergy efficiency of the Malaysian residential sector appears to be much lower than its corresponding energy efficiency. It has been observed that about 21% of total exergy losses are caused by refrigerator-freezer and 12% of total loss is caused by air conditioner. Washing machine, fan and rice cooker contribute about 11%, 10% and 8% of total exergy losses, respectively.     

Exergy analysis of the energy use in Greece

In this work, an analysis is being done on the concept of energy and exergy utilization and an application to the residential and industrial sector of Greece. The energy and exergy flows over the period from 1990 to 2004 were taken into consideration. This period was chosen based on the data reliability. The energy and exergy efficiencies are calculated for the residential and industrial sectors and compared to the findings of a previous study concerning the exergy efficiency of the Greek transport sector. The residential energy and exergy efficiencies for the year 2003 were 22.36% and 20.92%, respectively, whereas the industrial energy and exergy efficiencies for the same year were 53.72% and 51.34%, respectively. The analysis of energy and exergy utilization determines the efficiency of the economy as a whole. The results can play an important role in the establishment of efficiency standards of the energy use in various economy sectors. These standards could be utilized by energy policy makers.     

An exergy analysis for cement industries: An overview

Cement production has been one of the most energy intensive industries in the world with energy typically accounting about 30-40% of the production costs. Reduction of the production cost is very much important. Therefore, many studies on the efficient use of energy were carried out in the past. Moreover, these studies, which are based on exergy analysis, focus on industrial applications only. This paper reviewed exergy analysis, exergy balance, and exergetic efficiencies for cement industry. It is found that the exergy efficiency for cement production units ranges from 18% to 49% as well as the exergy losses due to the irreversibility from kiln are higher than other units in cement production plant.     

Energy and exergy analyses of a solar driven Mg–Cl hybrid thermochemical cycle for co-production of power and hydrogen

Analysis and performance assessment of a solar driven hydrogen production plant running on an Mg–Cl cycle, are conducted through energy and exergy methods. The proposed system consists of (a) a concentrating solar power cycle with thermal energy storage, (b) a steam power plant with reheating and regeneration, and (c) a hybrid thermochemical Mg–Cl hydrogen production cycle. The results show that higher steam to magnesium molar ratios are required for full yield of reactants at the hydrolysis step. This ratio even increases at low temperatures, although lowering the highest temperatures appears to be more favorable for linking such a cycle to lower temperature energy sources. Reducing the maximum cycle temperature decreases the plant energy and exergy efficiencies and may cause some undesirable reactions and effects. The overall system energy and exergy efficiencies are found to be 18.8% and 19.9%, respectively, by considering a solar heat input. These efficiencies are improved to 26.9% and 40.7% when the heat absorbed by the molten salt is considered and used as a main energy input to the system. The highest exergy destruction rate occurs in the solar field which accounts for 79% of total exergy destruction of the integrated system.     

Energy and exergy efficiencies in Turkish transportation sector, 1988–2004

This study aims at examining energy and exergy efficiencies in Turkish transportation sector. Unlike the previous studies, historical data is used to investigate the development of efficiencies of 17 years period from 1988 to 2004. The energy consumption values in tons-of-oil equivalent for eight transport modes of four transportation subsectors of the Turkish transportation sector, including hard coal, lignite, oil, and electricity for railways, oil for seaways and airways, and oil and natural gas for highways, are used. The weighted mean energy and exergy efficiencies are calculated for each mode of transport by multiplying weighting factors with efficiency values of that mode. They are then summed up to calculate the weighted mean overall efficiencies for a particular year. Although the energy and exergy efficiencies in Turkish transport sector are slightly improved from 1988 to 2004, the historical pattern is cyclic. The energy efficieny is found to range from 22.16% (2002) to 22.62% (1998 and 2004) with a mean of 22.42±0.14% and exergy efficiency to range from 22.39% (2002) to 22.85% (1998 and 2004) with a mean of 22.65±0.15%. Overall energy and exergy efficiencies of the transport sector consist mostly of energy and exergy efficiencies of the highways subsector in percentages varying from 81.5% in 2004 to 91.7% in 2002. The rest of them are consisted of other subsectors such as railways, seaways, and airways. The overall efficiency patterns are basically controlled by the fuel consumption in airways in spite of this subsector's consisting only a small fraction of total. The major reasons for this are that airways efficiencies and the rate of change in fuel consumption in airways are greater than those of the others. This study shows that airway transportation should be increased to improve the energy and exergy efficiencies of the Turkish transport sectors. However, it should also be noted that no innovations and other advances in transport technologies are included in the calculations. The future studies including such details will certainly help energy analysts and policy makers more than our study.     

Energy analysis and exergy utilization in the transportation sector of Jordan

The transport sector is responsible for about 37% of total final energy demand in Jordan, and thus it is considered an important driver for determining future national energy needs. This paper presents energy analysis and exergy utilization in the transportation sector of Jordan by considering the sectoral energy and exergy flows for the last two decades. The transportation sector, in Jordan, is a two-mode system, namely, road, which covers almost all domestic passenger and freight transport and airways. The latter is mainly used for international flights. The average estimated overall energy and exergy efficiencies were found as 23.2% and 22.8%, respectively. This simply indicates that there is large potential for improvement and efficiency enhancement. It is believed that the present technique is practical and useful for analyzing sectoral energy and exergy utilization to determine how efficiently energy and exergy are used in the transportation sector. It is also helpful to establish standards, based on exergy, to facilitate applications in different planning processes such as energy planning. A comparison with other countries showed that energy and exergy efficiencies of the Jordanian transport sector are slightly lower than that of Turkey, and higher than those incurred in Malaysia, Saudi Arabia and Norway. Such difference is inevitable due to dissimilar structure of the transport sector in these countries.     

Estimating the energy and exergy utilization efficiencies for the residential–commercial sector: an application

The main objectives in carrying out the present study are twofold, namely to estimate the energy and exergy utilization efficiencies for the residential–commercial sector and to compare those of various countries with each other. In this regard, Turkey is given as an illustrative example with its latest figures in 2002 since the data related to the following years are still being processed. Total energy and exergy inputs in this year are calculated to be 3257.20 and 3212.42 PJ, respectively. Annual fuel consumptions in space heating, water heating and cooking activities as well as electrical energy uses by appliances are also determined. The energy and exergy utilization efficiency values for the Turkish residential–commercial sector are obtained to be 55.58% and 9.33%, respectively. Besides this, Turkey's overall energy and exergy utilization efficiencies are found to be 46.02% and 24.99%, respectively. The present study clearly indicates the necessity of the planned studies toward increasing exergy utilization efficiencies in the sector studied.     

A review on analyzing and evaluating the energy utilization efficiency of countries

In recent years, there has been an increasing interest in applying energy and exergy analysis modeling techniques for energy-utilization assessments in order to attain energy saving. In this regard, various approaches have been used to perform the exergy analyses of countries. The main objective of the present study is to evaluate and analyze the energy utilization efficiencies of countries by reviewing the studies conducted on various countries or societies, to which different approaches have been applied. Thermodynamic relations used to perform energy and exergy analyses of countries are given first. The classification of studies conducted and the approaches applied are then investigated in terms of subsectors, such as utility, industrial, residential–commercial, and transportation sectors. Next, the countries considered are evaluated in terms of energy and exergy utilization efficiencies. Finally, the results obtained are discussed. It is expected that the review presented here will provide the investigators with knowledge about how much effective and efficient a country uses its natural resources. This knowledge is also needed for identifying energy efficiency and/or energy conservation opportunities as well as for dictating the energy strategies of a country or a society.     

Energy,exergy and economic analysis of industrial boilers

In this paper, the useful concept of energy and exergy utilization is analyzed, and applied to the boiler system. Energy and exergy flows in a boiler have been shown in this paper. The energy and exergy efficiencies have been determined as well. In a boiler, the energy and exergy efficiencies are found to be 72.46% and 24.89%, respectively. A boiler energy and exergy efficiencies are compared with others work as well. It has been found that the combustion chamber is the major contributor for exergy destruction followed by heat exchanger of a boiler system. Furthermore, several energy saving measures such as use of variable speed drive in boiler's fan energy savings and heat recovery from flue gas are applied in reducing a boiler energy use. It has been found that the payback period is about 1 yr for heat recovery from a boiler flue gas. The payback period for using VSD with 19 kW motor found to be economically viable for energy savings in a boiler fan.     

Exergy analysis of a dual-level binary geothermal power plant

Exergy analysis of a 12.4 MW existing binary geothermal power plant is performed using actual plant data to assess the plant performance and pinpoint sites of primary exergy destruction. Exergy destruction throughout the plant is quantified and illustrated using an exergy flow diagram, and compared to the energy flow diagram. The causes of exergy destruction in the plant include the exergy of the working fluid lost in the condenser, the exergy of the brine reinjected, the turbine-pump losses, and the preheater–vaporizer losses. The exergy destruction at these sites accounts for 22.6, 14.8, 13.9, and 13.0% of the total exergy input to the plant, respectively. Exergetic efficiencies of major plant components are determined in an attempt to assess their individual performances. The exergetic efficiency of the plant is determined to be 29.1% based on the exergy of the geothermal fluid at the vaporizer inlet, and 34.2% based on the exergy drop of the brine across the vaporizer–preheater system (i.e. exergy input to the Rankine cycle). For comparison, the corresponding thermal efficiencies for the plant are calculated to be 5.8 and 8.9%, respectively.     

Energy and exergy analyses of a solar based hydrogen production and compression system

In this study, a solar thermal based integrated system with a supercritical-CO₂ (sCO₂) gas turbine (GT) cycle, a four-step Mg–Cl cycle and a five-stage hydrogen compression plant is developed, proposed for applications and analyzed thermodynamically. The solar data for the considered solar plant are taken for Greater Toronto Area (GTA) by considering both daily and yearly data. A molten salt storage is considered for the system in order to work without interruption when the sun is out. The power and heat from the solar and sCO₂-GT subsystems are introduced to the Mg–Cl cycle to produce hydrogen at four consecutive steps. After the internal heat recovery is accomplished, the heating process at required temperature level is supplied by the heat exchanger of the solar plant. The hydrogen produced from the Mg–Cl cycle is compressed up to 700 bar by using a five-stage compression with intercooling and required compression power is compensated by the sCO₂-GT cycle. The total energy and exergy inputs to the integrated system are found to be 1535 MW and 1454 MW, respectively, for a 1 kmol/s hydrogen producing plant. Both energy and exergy efficiencies of the overall system are calculated as 16.31% and 17.6%, respectively. When the energy and exergy loads of the receiver are taken into account as the main inputs, energy and exergy efficiencies become 25.1%, and 39.8%, respectively. The total exergy destruction within the system is found to be 1265 MW where the solar field contains almost 64% of the total irreversibility with a value of ～811 MW.     

Energy and exergy analysis of hydrogen production by solid oxide steam electrolyzer plant

Energy and exergy analysis has been conducted to investigate the thermodynamic–electrochemical characteristics of hydrogen production by a solid oxide steam electrolyzer (SOSE) plant. All overpotentials involved in the SOSE cell have been included in the thermodynamic model. The waste heat in the gas stream of the SOSE outlet is recovered to preheat the H₂O stream by a heat exchanger. The heat production by the SOSE cell due to irreversible losses has been investigated and compared with the SOSE cell's thermal energy demand. It is found that the SOSE cell normally operates in an endothermic mode at a high temperature while it is more likely to operate in an exothermic mode at a low temperature as the heat production due to overpotentials exceeds the thermal energy demand. A diagram of energy and exergy flows in the SOSE plant helps to identify the sources and quantify the energy and exergy losses. The exergy analysis reveals that the SOSE cell is the major source of exergy destruction. The energy analysis shows that the energy loss is mainly caused by inefficiency of the heat exchangers. The effects of some important operating parameters, such as temperature, current density, and H₂O flow rate, on the plant efficiency have been studied. Optimization of these parameters can achieve maximum energy and exergy efficiencies. The findings show that the difference between energy efficiency and exergy efficiency is small as the high-temperature thermal energy input is only a small fraction of the total energy input. In addition, the high-temperature waste heat is of high quality and can be recovered. In contrast, for a low-temperature electrolysis plant, the difference between the energy and exergy efficiencies is more apparent because considerable amount of low-temperature waste heat contains little exergy and cannot be recovered effectively. This study provides a better understanding of the energy and exergy flows in SOSE hydrogen production and demonstrates the importance of exergy analysis for identifying and quantifying the exergy destruction. The findings of the present study can further be applied to perform process optimization to maximize the cost-effectiveness of SOSE hydrogen production.     

Energy and exergy analysis of fossil plant and heat pump building heating system at two different dead-state temperatures

In this paper, we deal with the energy and exergy analysis of a fossil plant and ground and air source heat pump building heating system at two different dead-state temperatures. A zone model of a building with natural ventilation is considered and heat is being supplied by condensing boiler. The same zone model is applied for heat pump building heating system. Since energy and exergy demand are key parameters to see which system is efficient at what reference temperature, we did a study on the influence of energy and exergy efficiencies. In this regard, a commercial software package IDA-ICE program is used for calculation of fossil plant heating system, however, there is no inbuilt simulation model for heat pumps in IDA-ICE, different COP (coefficient of performance) curves of the earlier studies of heat pumps are taken into account for the evaluation of the heat pump input and output energy. The outcome of the energy and exergy flow analysis at two different dead-state temperatures revealed that the ground source heat pumps with ambient reference have better performance against all ground reference systems as well as fossil plant (conventional system) and air source heat pumps with ambient reference.     

Evaluation of a new geothermal based multigenerational plant with primary outputs of hydrogen and ammonia

Increasing environmental concerns and decreasing fossil fuel sources compel engineers and scientists to find resilient, clean, and inexpensive alternative energy options Recently, the usage of renewable power resources has risen, while the efficiency improvement studies have continued. To improve the efficiency of the plants, it is of great significance to recover and use the waste heat to generate other useful products. In this paper, a novel integrated energy plant utilizing a geothermal resource to produce hydrogen, ammonia, power, fresh water, hot water, heated air for drying, heating, and cooling is designed. Hydrogen, as an energy carrier, has become an attractive choice for energy systems in recent years due to its features like high energy content, clean, bountiful supply, non-toxic and high efficiency. Furthermore in this study, hydrogen beside electricity is selected to produce and stored in a hydrogen storage tank, and some amount of hydrogen is mixed with nitrogen to compound ammonia. In order to determine the irreversibilities occurring within the system and plant performance, energy and exergy analyses are then performed accordingly. In the design of the plant, each sub-system is integrated in a sensible manner, and the streams connecting sub-systems are enumerated. Then thermodynamic balance equations, in terms of mass, energy, entropy and exergy, are introduced for each unit of the plant. Based on the system inputs and outputs, the energy and exergy efficiencies of the entire integrated plant is found to be 58.68% and 54.73% with the base parameters. The second part of the analysis contains some parametric studies to reveal how some system parameters, which are the reference temperature, geothermal resource temperature and mass flow rate, and separator inlet pressure in the geothermal cycle, affect both energy and exergy efficiencies and hence the useful outputs.