小型化多层带线谐振腔缺陷地结构LTCC宽带带通滤波器

利用多层宽边耦合带状线谐振结构实现小型化LTCC(LowTemperature Co-fired Ceramic)宽带滤波器。采用了两层、三层耦合带线谐振结构,利用这两种谐振结构可以有效减小滤波器的尺寸。利用四个谐振腔结构,实现较宽的频带和较强的选择特性;输出、输入引入电感反馈产生两个传输零点,利用DGS(Defected Ground Struc-ture)可使滤波器在阻带和镜像频率处产生较大的衰减。设计出侧面印刷互连和侧面通孔互连两种工艺结构的滤波器,利用LTCC工艺加工出侧面印刷互连的滤波器性能良好,测试性能和仿真结果基本吻合。     

基于SRR-DGS 新型高选择性带通滤波器的设计

通过在阶梯阻抗谐振器(Stepped Impedance Resonators, SIR)上加载开口谐振环缺陷地结构(Split- Ring Resonator Defected Ground Structure, SRR-DGS),设计了一款具有高选择性和较好带外抑制性能的带通滤波器。 测试结果表明,该滤波器的3 dB 工作频带为2. 56 ~2. 77 GHz (7. 9%),带内最大插入损耗为0. 8 dB。此外,在通带 两侧各有两个传输零点,分别位于2. 17 GHz、2. 48 GHz、2. 86 GHz 和3. 81 GHz,带外抑制均大于30 dB,表明该滤波 器具有较好的带外抑制特性。同时,仿真与测试结果吻合较好,验证了该滤波器设计方法的有效性。     

一种槽线扰动的基片集成波导双模滤波器

该文提出一种新型小型化基片集成波导(SIW)双模滤波器。通过使用正交的输入输出馈线,和一段倾斜的槽线来扰动腔体的两个简并模,滤波器能产生两个传输零点(TZ)。采用该方法设计了一个中心频率为15 GHz,带宽为350 MHz的基片集成波导双模滤波器。该滤波器结构简单,成本低廉,易于加工。测试结果和仿真结果吻合,较好地验证了设计的可行性和有效性。     

基于DGS结构的超宽带带通滤波器

基于双开口-互补开环谐振器的缺陷地结构(DGS),设计了一个结构紧凑的基片集成波导(SIW)超宽带带通滤波器。通过调整蚀刻在SIW底面的双开口-互补开环谐振器,SIW表面的共面波导与腔体之间的耦合,同时在阻带获得3个传输零点,以得到较好的频率选择性和良好的带外抑制。经过仿真优化及实物制作,测试结果表明,该滤波器工作在7.2GHz,相对带宽28%,带外抑制良好,仿真与测试结果吻合。     

多传输零点LTCC带通滤波器的设计与仿真

设计了一个具有3个有限传输零点的小型化高阻带抑制三阶带通滤波器(BPF)。采用低温共烧陶瓷(LTCC)技术实现了一个中心频率在2.45GHz、带宽100MHz的带通滤波器,且具有优良的带外抑制性能,输入、输出驻波比低于1.12。通过在每个谐振腔上增加一个小型电感,在带外产生了多个有限传输零点,零点的位置可通过控制电感值的大小轻松移动。整个滤波器的外形尺寸为3.2mm×2.5mm×1.5mm,满足1210型号封装要求。     

过模基片集成波导腔体滤波器设计

提出了一种过模基片集成波导(SIW)腔体滤波器。介绍了只由单个过模SIW 腔体构成的一阶滤波 器的原理。利用过模SIW 腔体中的基模实现模式交叉耦合,滤波器能产生一个位于通带任一边的传输零点(TZ)。 设计了一个由两个过模SIW 腔体级联成的二阶滤波器,该滤波器能产生两个传输零点。为了改善滤波器的阻带性 能,使用了非相似谐振器技术来实现寄生抑制。此外,阻带性能也可以通过增加基模谐振器的数量来改善。设计并 制造了含有两个过模SIW 腔体的二阶和三阶滤波器,仿真与测试结果吻合。     

多传输零点LTCC带通滤波器的设计与实现

提出了一种阻带具有多个传输零点的带通滤波器设计方法,基于低温共烧陶瓷(LTCC)技术实现,可满足移动通信用滤波器小型化、高性能的要求。在电路设计中,通过改进滤波器谐振器结构,分别在阻带的低端近端、高端远端引入传输零点以提高带外抑制。借助三维仿真软件,进行指标、结构的仿真优化,设计并制作了一款尺寸为6 mm×3 mm×2 mm的LTCC滤波器,其中心频率f0=2.25 GHz,0.5 dB带宽不小于100 MHz,通带内损耗不大于1.8 dB,在1.33,1.78 GHz和二次谐波处均有传输零点。实测结果表明,该滤波器在阻带低端和二次谐波处有较好的抑制,因此其在移动通信系统中会有广泛应用。     

一种高抑制小型化带通滤波器

该文提出了一种具有3个传输零点的高带外抑制小型化带通滤波器。通过耦合控制可在梳状线滤波器响应中引入3个传输零点。通过源/负载耦合和传输线上刻蚀的马刺线可降低带外抑制,使滤波器获得更好的性能。设计并制作了一款小型化带通滤波器实物,仿真结果表明,该文设计的滤波器工作中心频率和相对带宽分别为2.12 GHz和20%,该滤波器的回波损耗优于40 dB,插入损耗小于0.2 dB,带外抑制小于40 dB。此外,该滤波器还具有结构简单紧凑、易加工等特点,实物测试结果与仿真结果基本一致。     

基于菱形SIW的小型化双频可控带通滤波器

提出了一种四分之一模菱形基片集成波导谐振腔,设计并制作了一款小型化的双频带通滤波器.引入了T型槽线结构,实现了滤波器双通带中心频率的调节.利用间隙耦合、高低阶模式耦合和源负载耦合,在带外产生了7个传输零点,提高了滤波器的频率选择特性.滤波器双通带中心频率分别为4.4和7.7 GHz,3 dB带宽分别为517和405 M...     

一种小型的交叉耦合阶梯阻抗谐振器带通滤波器

利用小型化的阶梯阻抗谐振器设计了一种交叉耦合带通滤波器.引入的交叉耦合结构在带外产生了一对传输零点以更好地抑制带外干扰信号而不影响通带特性.由于采用了小型化的阶梯阻抗谐振器,交叉耦合带通滤波器尺寸大为减小,同时寄生通带移向更高端.实验和仿真结果基本一致.     

A design of the novel coupled-line bandpass filter using defectedground structure with wide stopband performance

In this paper, a novel three-pole coupled-line bandpass filter with a microstrip configuration is presented. Presented bandpass filters use defected ground structure (DGS) sections to simultaneously realize a resonator and an inverter. The proposed coupled-line bandpass filter provides compact size with low insertion-loss characteristic. Furthermore, a DGS shape for a microstrip line is newly proposed. The proposed DGS unit structure has a resonance characteristic in some frequency band. The proposed coupled-line filter can provide attenuation poles for wide stopband characteristic due to resonance characteristic of DGS. The equivalent circuit for the proposed DGS unit section is described. The equivalent-circuit parameters for DGS are extracted by using a three-dimensional finite-element-method calculation and simple circuit analysis method. A design method for the proposed coupled-line filter is derived based on coupled-line filter theory and the equivalent circuit of the DGS. The experimental results show excellent agreements with theoretical simulation results     

一种新型CPW滤波器的设计

设计了一种新型结构的CPWDGS单元,这种DGS结构在CPW两侧的接地面上对称刻蚀一定形状,形成带阻特性。通过对DGS结构单元的适当组合可以实现宽阻带的微波滤波器,仿真结果表明,该结构具有陡峭的阻带衰减特性,通过改变DGS单元的尺寸可以工作于不同的频段,增加单元数目可以改善带阻滤波器的性能。设计制作了一个五单元的CPW带阻滤波器,测试结果与仿真结果相吻合。这种结构的带阻滤波器设计灵活,结构简单、易于制作、便于安装,具有广泛的应用前景。     

Microstrip dual-band bandstop filter of defected ground structure and stepped impedance resonators

This article presents a compact microstrip dual-band bandstop filter (BSF), in which one λ_g/4 defected ground structure (DGS) pair is utilised to realise one stopband while two stepped impedance resonators (SIRs) help obtain another stopband and suppress the spurious harmonics. The design strategies and the equivalent circuits are introduced in detail. The measured results indicate 43.8% and 18.7% fractional bandwidth in the two stopbands (2.4 GHZ and 5.2 GHz) respectively, and the return loss is greater than 15 dB in the whole passband. In addition, size reduction can be conveniently achieved by adjusting the length of the SIRs and DGS.     

Miniaturized microstrip lowpass filter with wide stopband using double equilateral U-shaped defected ground structure

A compact double equilateral U-shaped defected ground structure (DGS) unit is proposed. In contrast to a single finite attenuation pole characteristic offered by the conventional dumbbell DGS, the proposed DGS unit provides dual finite attenuation poles that can be independently controlled by the DGS lengths. A 2.4-GHz microstrip lowpass filter using five cascaded double U-shaped DGS units is designed and compared with conventional DGS lowpass filters. This low pass filter achieves a wide stopband with overall 30-dB attenuation up-to10 GHz and more than 42% size diminution.     

An Embedded Common-Mode Suppression Filter for GHz Differential Signals Using Periodic Defected Ground Plane

A novel low-cost filter design for common-mode noise suppression in high-speed differential signals is proposed. It is realized by periodically etching the dumbbell-shape defected ground structure (DGS) to perturb the return current of the common- mode noise. A transmission-line model for the proposed structure is also developed with good agreement to the full-wave simulation and measurement result. It is found that over 20 dB suppression of common-mode noise can be achieved over a wide frequency range from 3.3 to 5.7 GHz with 3 cascaded DGS cells, while the differential signals still keep good signal integrity in eye-pattern observation. The common-mode current, which generally results in common-mode EMI, on the attached input/output cable is also proved to be efficiently suppressed (15 dB in average) within the stopband by the proposed filter.     

An asymmetric defected ground structure with elliptical response and its application as a lowpass filter

A new asymmetric defected ground structure (DGS) consisting of two square headed slots connected with a rectangular slot transversely under a microstrip line is proposed. In the frequency characteristics of its unit cell, an attenuation zero is observed close to the attenuation pole. The DGS unit is represented by Cauer's T-network, modeled by a third order elliptical lowpass filter and finally equivalent L-C parameters are extracted. Several studies have been accomplished on the influence of the geometric modification of the filter on its characteristics. Better transition sharpness, lower passband insertion loss and broader stopband are observed, compared to popular dumbbell DGSs due to its additional attenuation zero. The two-cell configuration of this DGS produces a three-pole lowpass filter having wide and deep stopband at low cutoff frequency. This is applied under the input and output feed lines of a parallel-coupled bandpass filter for suppressing harmonic frequencies. A lowpass filter is realized using cascaded investigated DGS and dumbbell DGS under a microstrip line.     

基于DGS结构的超宽带高通滤波器设计

介绍目前应用于微波平面电路小型化领域的DGS结构,通过仿真试验研究了DGS结构对耦合微带双线的影响,基于仿真结果设计小型化、结构简单的超宽带高通滤波器,并制作实物进行测量,实测数据与仿真结果基本吻合。     

小型化宽频带宽阻带微带滤波器的设计

目前研究宽频带微带滤波器的文献很多,但普遍不能同时具有宽频带和宽阻带的性能,且带内回波损耗大,带外抑制差。为此,提出了一种新型的宽频带微带滤波器。该滤波器采用在E型阶跃阻抗谐振器( SIR)中引入U型结构的方法,实现其宽频带宽阻带的性能。对滤波器进行仿真、加工与实测,仿真结果与实测结果吻合良好。加工得到的滤波器3 dB带宽为7.1 GHz,低于-20 dB的高频阻带为9.3 GHz,带内回波损耗低于-23.2 dB,实物尺寸为15 mm伊8.5 mm,具有小型化的特点。实测数据表明,提出的滤波器具有良好的性能,在工程领域具有实际的应用价值。     

Planar microstrip UWB bandpass filter using U-shaped slot coupling structure

A compact planar microstrip UWB bandpass filter is proposed. It is realised by cascading a lowpass filter and a highpass filter. A transmission line with U-shaped slots coupled with two DGS units on the back of the circuit board has the characteristic of highpass, while a periodic uniform DGS array has the characteristic of lowpass. Combining these two structures, a new UWB bandpass filter (BPF) is fabricated and measured. Measured results show that the proposed BPF has wide bandwidth from 3.0 to 10.9 GHz, all the measured return loss less than 13 dB in the passband. The BPF achieves a wide stopband with 18 dB attenuation up to 18.0 GHz     

Dual-band bandpass filter based on dual-plane microstrip/interdigital DGS slot structure

A novel dual-band bandpass filter based on a dual-plane structure consisting of both a microstrip and a defected ground structure (DGS) slot with an interdigital shape is proposed. The microstrip structure is connected to the ground plane by grounding vias to obtain tight coupling. By tuning the length of the fingers in the DGS, it is convenient to change the first passband operating frequency. The equivalent-circuit model is derived for the filter. A filter with two passbands centring at 2.44 and 3.28 GHz is shown with stopband attenuation of greater than 30 dB over the frequency range 3.7- 9 GHz.