Enhanced infrared transmission characteristics of microwave-sintered $$\hbox {Y}_{2}\hbox {O}_{3}$$–$$\hbox {MgO}$$MgO nanocomposite

Infrared (IR) transparent ceramics are found to have applications in demanding defence and space missions. In this work, \(\hbox {Y}_{2}\hbox {O}_{3}\)–\(\hbox {MgO}\) nanocomposites were synthesised by a modified single-step combustion technique. The characterisation of the as-prepared powder by X-ray diffraction and transmission electron microscopy revealed the presence of cubic phases of ultra-fine nanostructured \(\hbox {Y}_{2}\hbox {O}_{3 }\) and MgO, with an average crystallite size of \({\sim }19 \hbox { nm}\). For the first time the resistive and microwave heatings were effectively coupled for sintering the sample, and it was found that the sintering temperature and soaking time were reduced considerably. The pellets were sintered to 99.2% of the theoretical density at \(1430{^{\circ }}\hbox {C}\) for a soaking duration of 20 min. The well-sintered pellets with an average grain size of \({\sim }200 \hbox { nm}\) showed better transmittance properties relative to pure yttria. The promising percentage transmission of 80% in the UV–visible region and 82% in the mid-IR region shown by \(\hbox {Y}_{2}\hbox {O}_{3}\)–\(\hbox {MgO}\) nanocomposites can be tailored and made cost-effective to fabricate high-quality IR windows for strategic defence and space missions.     

Synthesis of $$\hbox {Ag}_{2}\hbox {Se}$$–graphene–$$\hbox {TiO}_{2} $$TiO2 nanocomposite and analysis of photocatalytic activity of $$\hbox {CO}_{2}$$CO2 reduction to $$\hbox {CH}_{3}\hbox {OH}$$CH3OH

The present work deals with the development of a new ternary composite, \(\hbox {Ag}_{2}\hbox {Se}\)–\(\hbox {G}\)–\(\hbox {TiO}_{2}\), using ultrasonic techniques as well as X-ray diffraction (XRD), scanning electron microscopy (SEM), high transmission electron microscopy (HTEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and UV–Vis diffuse reflectance spectra (DRS) analyses. The photocatalytic potential of nanocomposites is examined for \(\hbox {CO}_{2}\) reduction to methanol under ultraviolet (UV) and visible light irradiation. \(\hbox {Ag}_{2}\hbox {Se}\)–\(\hbox {TiO}_{2}\) with an optimum loading graphene of 10 wt% exhibited the maximum photoactivity, obtaining a total \(\hbox {CH}_{3}\hbox {OH}\) yield of 3.52 \(\upmu \hbox {mol}\,\hbox {g}^{-1}\,\hbox {h}^{-1}\) after 48 h. This outstanding photoreduction activity is due to the positive synergistic relation between \(\hbox {Ag}_{2}\hbox {Se}\) and graphene components in our heterogeneous system.     

Thermodynamic Investigation of the Eutectic Mixture of the $$\hbox {LiNO}_{3}$$–$$\hbox {NaNO}_{3}$$NaNO3–$$\hbox {KNO}_{3}$$KNO3–$$\hbox {Ca}(\hbox {NO}_{3})_{2}$$Ca(NO3)2 System

Molten nitrate salt is usually employed as heat transfer or energy storage medium in concentrating solar power systems to improve the overall efficiency of thermoelectric conversion. In the present work, the liquidus curves of the \(\hbox {LiNO}_{3}\)–\(\hbox {NaNO}_{3}\)–\(\hbox {KNO}_{3}\)–\(\hbox {Ca}(\hbox {NO}_{3})_{2}\) system is determined by conformal ionic solution theory according to the solid–liquid equilibrium state of the binary mixture. The calculated eutectic temperature of the mixture is \(93.17\,{^{\circ }}\hbox {C}\), which is close to the experimental value of \(93.22\,{^{\circ }}\hbox {C}\) obtained from differential scanning calorimetry (DSC). Visualization observation experiments reveal that the quaternary eutectic mixture begins to partially melt when the temperature reaches \(50\,{^{\circ }}\hbox {C}\), and the degree of melting increases with temperature. The mixture is completely melted at \(\hbox {130}\,{^{\circ }}\hbox {C}\). The observed changes in the dissolved state at different temperatures correlate well with the DSC heat flow curve fluctuations.     

Solidification of NaCl–LiF–$$\hbox {CaF}_{2}$$ ternary composites

The purpose of this work is to refine the microstructure of eutectic halides, candidates to polaritonic metamaterials, through the directional solidification of ternary compositions. NaCl–LiF–\(\hbox {CaF}_{2}\) ternary composites have been solidified using Bridgman and micro-pulling-down techniques at pulling rates from 3 to 300 mm/h for the first time. The interparticle spacing is 12% smaller for this composition than for the binary fibrous NaCl–LiF eutectic. Conditions for solidification and growth in order to generate ternary aligned microstructures are discussed. The very small amount of melt remaining in the mixtures until \(580\,^{\circ }\hbox {C}\) is probably the consequence of solid solubility of LiCl in NaCl and the formation of the reciprocal salt pairs, as in NaCl–LiF. However, it does not prevent the solidification of homogenous ternary microstructures.     

In situ synthesis and properties of self-reinforced $$\hbox {Si}_{3} \hbox {N}_{4}\textendash \hbox {SiO}_{2}\textendash \hbox {Al}_{2} \hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3} \ (\hbox {La}_{2}\hbox {O}_{3}$$) glass–ceramic composites

In-situ-grown \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\)-reinforced \(\hbox {SiO}_{2}\textendash \hbox {Al}_{2}\hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3}\) \((\hbox {La}_{2}\hbox {O}_{3})\) self-reinforced glass–ceramic composites were obtained without any \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\) seed crystal. These composites with different compositions were prepared in a nitrogen atmosphere for comparison of phase transformation and mechanical properties. The results showed that \(\hbox {SiO}_{2}\textendash \hbox {Al}_{2}\hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3}\) \((\hbox {La}_{2}\hbox {O}_{3})\) glass can effectively promote \(\upalpha \)- to \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\) phase transformation. The crystallized \(\hbox {Y}_{2}\hbox {Si}_{2}\hbox {O}_{7}\textendash \hbox {La}_{4.67}\hbox {Si}_{3}\hbox {O}_{13}\) phases with a high melting point significantly benefited the high-temperature mechanical properties of the composites. The \(\hbox {Si}_{3}\hbox {N}_{4}\textendash \hbox {SiO}_{2}\textendash \hbox {Al}_{2} \hbox {O}_{3}\textendash \hbox {Y}_{2}\hbox {O}_{3}\) \((\hbox {La}_{2}\hbox {O}_{3})\) glass–ceramic composites exhibit excellent mechanical properties compared with unreinforced glass–ceramic matrix, which is undoubtedly attributed to the elongated \(\upbeta \!\hbox {-Si}_{3}\hbox {N}_{4}\) grains. These glass–ceramic \(\hbox {Si}_{3}\hbox {N}_{4}\) composites with excellent comprehensive properties might be a promising material for high-temperature applications.     

Radiative Properties of Ceramic $$\hbox {Al}_{2}\hbox {O}_{3}$$, AlN and $$\hbox {Si}_{3}\hbox {N}_{4}$$Si3N4—II: Modeling

In Part I of this study (Cheng et al. in Int J Thermophys 37: 62, 2016), the reflectance and transmittance of dense ceramic plates were measured at wavelengths from 0.4 \(\upmu \hbox {m}\) to about 20 \(\upmu \hbox {m}\). The samples of \(\hbox {Al}_{2}\hbox {O}_{3}\) and AlN are semitransparent in the wavelength region from 0.4 \(\upmu \hbox {m}\) to about 7 \(\upmu \hbox {m}\), where volume scattering dominates the absorption and scattering behaviors. On the other hand, the \(\hbox {Si}_{3}\hbox {N}_{4}\) plate is opaque in the whole wavelength region. In the mid-infrared region, all samples show phonon vibration bands and surface reflection appears to be strong. The present study focuses on modeling the radiative properties and uses an inverse method to obtain the scattering and absorption coefficients of \(\hbox {Al}_{2}\hbox {O}_{3}\) and AlN in the semitransparent region from the measured directional-hemispherical reflectance and transmittance. The scattering coefficient is also predicted using Mie theory for comparison. The Lorentz oscillator model is applied to fit the reflectance spectra of AlN and \(\hbox {Si}_{3}\hbox {N}_{4}\) from 1.6 \(\upmu \hbox {m}\) to 20 \(\upmu \hbox {m}\) in order to obtain their optical constants. It is found that the phonon modes for \(\hbox {Si}_{3}\hbox {N}_{4}\) are much stronger in the polycrystalline sample studied here than in amorphous films reported previously.     

Process optimization of dye-sensitized solar cells using $$\hbox {TiO}_{2}$$–graphene nanocomposites

\(\hbox {TiO}_{2}\)–graphene (TGR) nanocomposites with varying concentrations of graphene from 0 to 1 wt% were prepared by direct mix method. X-ray diffraction (XRD) spectra confirmed the incorporation of graphene in photoanode material, which was further supported by field emission scanning electron microscopy (FESEM) and energy dispersive X-ray (EDX). The UV–visible spectrum of these nanocomposites shifted towards higher wavelength region as compared to pure \(\hbox {TiO}_{2}\) that indicated a reduced band gap and hence, enhanced absorption bandwidth. Significant reduction in electron–hole recombination was confirmed from photoluminescence spectroscopy. These TGR nanocomposite films after tethering with black dye were employed as photoanodes in dye-sensitized solar cells (DSSCs). The efficiency of solar cells at varying concentrations of graphene (in photoandes) was also investigated. TGR 0.25 wt% nanocomposite showed the highest photocurrent density (\(J_{\mathrm{SC}}\)) of \(18.4\,\hbox {mA}\,\hbox {cm}^{-2}\) and efficiency (\(\eta \)) of 4.69%.     

Effect of the method for producing $$\hbox {}$$–$$\hbox {Cr}_{3}\hbox {C}_{2}$$Cr3C2 bulk composites on the structure and properties

Copper–chromium carbide composites containing a carbide phase of 20–30 vol% were obtained with the use of solid- and liquid-phase mechanosyntheses, followed by magnetic pulse compaction (MPC) and spark plasma sintering. The morphology, structural-phase composition, density, hardness and electrical conductivity of the composites were investigated. The structure of composites obtained by MPC represents regions of copper matrix hardened by superfine carbide precipitates surrounded by a layer of chromium carbide. In the composites obtained by spark plasma sintering, the copper matrix hardened by superfine carbide precipitates was divided into areas surrounded by a copper–chromium layer. A composite obtained by the MPC of the powders synthesized using solid-phase mechanosynthesis (MS) (copper, chromium and graphite) had the highest values of Vickers microhardness (4.6 GPa) and Rockwell hardness (HRA 69). The best value of electrical conductivity (36% IACS) was achieved using liquid-phase MS (copper, chromium and xylene) and spark plasma sintering. Liquid-phase MS is the only way to synthesize the powder with a small amount of the carbide phase and without contamination.     

Electrical and Thermal Characteristics of the Insulator–Metal Transition in Crystalline $$\hbox {V}_{2}\hbox {O}_{5}$$ Films

The electrical and thermal properties with respect to the crystallization in \(\hbox {V}_{2}\hbox {O}_{5}\) thin films were investigated by measuring the resistance at different temperatures and applied voltages. The changes in the crystal structure of the films at different temperatures were also explored using Raman measurements. The thermal diffusivity of the crystalline \(\hbox {V}_{2}\hbox {O}_{5}\) film was measured by the nanosecond thermoreflectance method. The microstructures of amorphous and crystalline \(\hbox {V}_{2}\hbox {O}_{5}\) were observed by SEM and XRD measurements. The temperature-dependent Raman spectra revealed that a structural phase transition does not occur in the crystalline film. The resistance measurements of an amorphous film indicated semiconducting behavior, whereas the resistance of the crystalline film revealed a substantial change near \(250\,{^{\circ }}\hbox {C}\), and Ohmic behavior was observed above \(380\,{^{\circ }}\hbox {C}\). This result was due to the metal–insulator transition induced by lattice distortion in the crystalline film, for which \(T_{\mathrm{c}}\) was \(260\,{^{\circ }}\hbox {C}\). \(T_{\mathrm{c}}\) of the film decreased from 260 \({^{\circ }}\hbox {C}\) to \(230\,{^{\circ }}\hbox {C}\) with increasing applied voltage from 0 V to 10 V. Furthermore, the thermal diffusivity of the crystalline film was \(1.67\times 10^{-7}\,\hbox {m}^{2}\cdot \hbox {s}^{-1}\) according to the nanosecond thermoreflectance measurements.     

Synthesis and luminescence in sol–gel auto-combustion-synthesized $$\hbox {CaSnO}_{3}{:}\hbox {Eu}^{3+}$$ phosphor

Undoped and Eu-doped \(\hbox {CaSnO}_{3}\) nanopowders were prepared by a facile sol–gel auto-combustion method calcined at \(800{^{\circ }}\hbox {C}\) for 1 h. The samples are found to be well-crystallized pure orthorhombic \(\hbox {CaSnO}_{3}\) structure. Photoluminescence (PL) measurements indicated that the undoped sample exhibits a broad blue emission at about 420–440 nm, which can be recognized from an intrinsic centre or centres in \(\hbox {CaSnO}_{3}\). Eu-doped \(\hbox {CaSnO}_{3}\) showed broad blue emission centred about 434 nm, a weak peak at 465 nm and a sharp intense yellow emission line at 592 nm. The emission situated at 592 nm was assigned to the f–f transition of \(^{5}\hbox {D}_{0}\rightarrow ^{7}\hbox {F}_{1}\) in \(\hbox {Eu}^{3+}\) ions. The afterglow emission and PL decay results in Eu-doped \(\hbox {CaSnO}_{3}\) phosphor, which revealed that there are at least two different traps in this phosphor. From the obtained results, \(\hbox {Eu}^{3+}\)-doped \(\hbox {CaSnO}_{3}\) phosphor could be proposed as a potential white luminescent optical material.     

Fusion Diagrams in the \mathrm{BiBO}_{3}–\mathrm{YbBO}_{3} and \mathrm{Bi}_{4}\mathrm{B}_{2}\mathrm{O}_{9}–\mathrm{YbBO}_{3} Systems

A calculation model of the Gibbs energy of ternary oxide compounds from the binary components was used. Thermodynamic properties of \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2}\mathrm{O}_{3}\) – \(\mathrm{B}_{2}\mathrm{O}_{3}\) ternary systems in the condensed state were calculated. Thermodynamic data of binary and ternary compounds were used to determine the stable sections. The probability of reactions between the corresponding components in the \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2} \mathrm{O}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) system was estimated. Fusibility diagrams of systems \(\mathrm{BiBO}_{3}\) – \(\mathrm{YbBO}_{3}\) and \(\mathrm{Bi}_{4} \mathrm{B}_{2} \mathrm{O}_{9}\) – \(\mathrm{YbBO}_{3}\) were studied by physical–chemical analysis. The isothermal section of the phase diagram of \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2} \mathrm{O}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) at 298 K is built, as well as the projection of the liquid surface of \(\mathrm{BiBO}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) – \(\mathrm{YbBO}_{3}\) .     

Optimization of the liquid–liquid interfacial precipitation method for the synthesis of $$\hbox {C}_{60}$$ nanotubes

Tubular fullerene nanowhiskers called ‘fullerene nanotubes’ are composed of \(\hbox {C}_{60}\) fullerene molecules (\(\hbox {C}_{60}\) NTs) are synthesized at room temperature using the liquid–liquid interfacial precipitation method in the pyridine and isopropyl alcohol (IPA) system. The growth control of fullerene nanotubes is important for their chemical and physical properties as well as for their future applications. In the present study, we investigated the effect of light, water, solvent ratio and temperature on the synthesis of \(\hbox {C}_{60}\) nanotubes. A marked development in the yield of \(\hbox {C}_{60}\) NTs was achieved using dehydrated solvents, a solution with a volume ratio of 1:9 for pyridine: IPA, a growth temperature equal to \(5{^{\circ }}\hbox {C}\) and by illuminating the \(\hbox {C}_{60}\)-pyridine solution with ultraviolet light (wavelength 302 nm) for 102 h. The synthesized fullerene nanotubes were characterized by different analytical techniques including Raman and Fourier transform infrared spectroscopy, optical microscopy, focussed ion beam scanning electron microscopy and transmission electron microscopy.     

Magnetic measurements,Raman and infrared spectra of metal–ligand complex derived from $$\hbox {CoCl}_{2}\cdot \hbox {6H}_{2}\hbox {O}$$ and 2-benzoyl pyridine

Nanocrystalline complex of \(\hbox {CoCl}_{2}\cdot 6\hbox {H}_{2}\hbox {O}{-}2\)-benzoyl pyridine is prepared by chemical route. Each component of the desired complex is identified by analysing the X-ray diffractograms. Energy-dispersive X-ray analysis (EDX) data confirmed the presence of the desired elements of the sample. Theoretical optimized structure of the complex was derived using ab initio density functional level of theory (DFT) method of calculation. The average nanocrystallite size estimated from the XRD data is \(\sim \)43 nm. Static magnetic property of the complex is studied in the temperature range from 300 K down to 14 K. The estimated magnetic moment of the complex is high when compared to that of the free ion magnetic moment of \(\hbox {Co}^{2+}\) and this is attributed to the less effect of the crystal field acting on the ion in the organic complex due to which orbital moments are not fully quenched. The magnetic property of the complex is also remarkably enhanced compared to that of the diamagnetic 2-benzoyl pyridine which may be suitable for applications in devices. FTIR and Raman spectra of the ligand, 2-benzoyl pyridine and the synthesized complex are recorded at room temperature, which not only confirm the presence of each phase in the complex, but some interesting results are also extracted from the analyses of different Raman active modes of the complex.     

Dissociation reaction of the 1/3$$ \left\langle {\bar{1}101} \right\rangle $$ edge dislocation in α-Al2O3

It has been reported that dislocations with 1/3\( \left\langle {\bar{1}101} \right\rangle \) edge component of the Burgers vector are formed in {1\( \bar{1} \)04}/\( \left\langle {11\bar{2}0} \right\rangle \) low-angle grain boundaries of alumina (α-Al₂O₃). These dislocations dissociate into two partial dislocations with a stacking fault on the (0001) plane (Tochigi et al. in J Mater Sci 46:4428–4433, 2011). However, the dissociation reaction of these dislocations has not been determined so far. In this study, the structures of the dissociated dislocations and the (0001) stacking fault were investigated by transmission electron microscopy and theoretical calculations. It was revealed that the dissociated dislocations were generated from the 1/3\( \left\langle {\bar{1}101} \right\rangle \) perfect edge dislocation by the reaction of 1/3\( \left\langle {\bar{1}101} \right\rangle \) → 1/18\( \left\langle {\bar{4}223} \right\rangle \) + 1/18\( \left\langle {\bar{2}4\bar{2}3} \right\rangle \). Furthermore, electron energy loss spectroscopy analysis was performed to examine the atomic/electronic structure of the (0001) stacking fault. In the observed spectra, a chemical shift and intensity decrease were found at the oxygen K-edge. Theoretical spectrum analysis using first-principles calculations revealed that the characteristic features of the spectra are originated from the local atomic configurations of the (0001) stacking fault.     

Mathematical model of Boltzmann’s sigmoidal equation applicable to the set-up of the RF-magnetron co-sputtering in thin films deposition of $$\hbox {Ba}_{{x}}\hbox {Sr}_{1-{x}} \hbox {TiO}_{3}$$

In this work, we present the stoichiometric behaviour of \(\hbox {Ba}^{2+}\) and \(\hbox {Sr}^{2+}\) when they are deposited to make a solid solution of barium strontium titanate. \(\hbox {Ba}_{{x}}\hbox {Sr}_{1-{x}} \hbox {TiO}_{3}\) (BST) thin films of nanometric order on a quartz substrate were obtained by means of in-situ RF-magnetron co-sputtering at 495\({^{\circ }}\)C temperature, applying a total power of 120 W divided into intervals of 15 W that was distributed between two magnetron sputtering cathodes containing targets of \(\hbox {BaTiO}_{3}\) and \(\hbox {SrTiO}_{3}\), as follows: 0–120, 15–105, 30–90, 45–75, 60–60, 75–45, 90–30, 105–15 and 120–0 W. Boltzmann’s sigmoidal modified equation (Boltzmann’s profile) is proposed to explain the behaviour and the deposition ratio Ba/Sr of the BST as a function of the RF-magnetron power. The Boltzmann’s profile proposal shows concordance with experimental data of deposits of BST on substrates of nichrome under the same experimental conditions, showing differences in the ratio Ba/Sr of the BST due to the influence of the substrate.     

Photoacoustic Spectroscopic Study of Optical Properties of $$\hbox {Cu}_{2}\hbox {GeTe}_{3}$$ in Temperature Range from 80 K to 300 K

We used photoacoustic spectroscopy to investigate the optical properties of \(\hbox {Cu}_{2}\hbox {GeTe}_{3}\). The temperature dependence of the bandgap energy was evaluated from optical absorption spectra obtained in the photon energy range of 0.76 eV to 0.81 eV between 80 K and 300 K. We used the empirical and semi-empirical models of Varshni, Viña, and Pässler to describe the observed bandgap shrinkage in this compound. The Debye temperature and effective phonon temperature of the compound were estimated to be approximately 227.4 K and 151.6 K, respectively. Thus, the temperature dependence of the bandgap is mediated by acoustic phonons.     

Emission of Gas and $$\hbox {Al}_{2}\hbox {O}_{3}$$ Smoke in Gas–Al Particle Deflagration: Experiments and Emission Modeling for Explosive Fireballs

Emission of gas and \(\hbox {Al}_{2}\hbox {O}_{3}\) smoke within the deflagration of \(\hbox {H}_{2}{-}\hbox {O}_{2}\)–{\(\hbox {N}_{2}{-}\hbox {CO}_{2}\)}–Al particles has been studied in a closed combustion chamber at pressures of up to 18 bar and at gas temperatures of up to 3700 K. Measurements of radiance intensity were taken using a five wavelength pyrometer (0.660 \(\upmu \hbox {m}\), 0.850 \(\upmu \hbox {m}\), 1.083 \(\upmu \hbox {m}\), 1.260 \(\upmu \hbox {m}\), 1.481 \(\upmu \hbox {m}\)) and a grating spectrometer in the range (4.10 \(\upmu \hbox {m}\) to 4.30 \(\upmu \hbox {m}\)). In order to characterize the aluminum oxide smoke size and temperature, an inversion method has been developed based on the radiation transfer equation and using pyrometer measurements and thermochemical calculations of \(\hbox {Al}_{2}\hbox {O}_{3}\) smoke volume fractions. Temperatures in combustion gas have been determined using a method based on the assumed blackbody head of the 4.26 \(\upmu \hbox {m}\) \(\hbox {CO}_{2}\) emission line and on its spectral shift with pressure and temperature. For validation purpose, this method has been applied to measurements obtained when calibrated alumina particles are injected in a combustion chamber prior to gaseous deflagrations. This mathematical inversion method was developed to investigate explosive fireballs.     

Cation substitution induced blue-shift of optical band gap in nanocrystalline $$\hbox {Zn}_{(1-x)} \hbox {Ca}_{x}\hbox {O}$$ thin films deposited by sol–gel dip coating technique

Transparent nanocrystalline \(\hbox {Zn}_{(1-x)}\hbox {Ca}_{x}\hbox {O }(0 \le x \le 0.20)\) thin films were deposited on glass substrates by sol–gel dip coating method. The X-ray diffraction (XRD) pattern revealed the polycrystalline nature of the films with hexagonal wurtzite structure and confirmed the non-existence of the secondary phase corresponding to CaO indicating the monophasic nature of the deposited films. The crystallinity of the films deteriorated with higher dopant concentration due to the segregation or separation of dopant ions in grain boundaries. The lattice parameters and the unit cell volume increased to a higher Ca-dopant concentration. This was due to the successful incorporation of \(\hbox {Ca}^{2+}\) ions with larger ionic radius in the host zinc oxide (ZnO) lattice. The optical transmittance spectra of the samples showed transmittances above 60% in the visible spectral range and the absorption edge in the near ultra-violet region got blue-shifted with cation substitution. The estimated optical energy gaps confirmed the band gap widening with increase in Ca-dopant concentration. The calculated values increased from 3.30 eV for undoped ZnO to 3.73 eV for \(\hbox {Zn}_{0.8}\hbox {Ca}_{0.2}\hbox {O}\) thin films giving 13.03% enhancement in the energy gap value due to the electronic perturbation caused by cation substitution as well as deterioration in crystallinity.     

Experimental Measurements of Thermophysical Properties of \mathrm{Al}_{2}\mathrm{O}_{3}– and \mathrm{TiO}_{2}–Ethylene Glycol Nanofluids

This paper presents measurements of the thermal conductivity and the dynamic viscosity of $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol and $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol (1 % to 3 % particle volume fraction) nanofluids carried out in the temperature range from $0\,^{\circ }$ 0 ° C to $50\,^{\circ }$ 50 ° C. The thermal-conductivity measurements were performed by using a transient hot-disk TPS 2500S apparatus instrumented with a 7577 probe (2.001 mm in radius) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The dynamic-viscosity measurements and the rheological analysis were carried out by a rotating disk type rheometer Haake Mars II instrumented with a single-cone probe (60 mm in diameter and $1^{\circ }$ 1 ° ) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The thermal-conductivity measurements of the tested nanofluids show a great sensitivity to particle volume fraction and a lower sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a thermal-conductivity enhancement (with respect to pure ethylene glycol) from 1 % to 19.5 % and from 9 % to 29 %, respectively. $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids exhibit Newtonian behavior in all the investigated temperature and particle volume fraction ranges. The relative viscosity shows a great sensitivity to the particle volume fraction and weak or no sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a dynamic viscosity increase with respect to ethylene glycol from (4 to 5) % to 30 % and from 14 % to 50 %, respectively. Present experimental measurements were compared both with available measurements carried out by different researchers and computational models for thermophysical properties of nanofluids.