Design of a TE10 Taper Used in the LHCD Launcher for EAST

Calculations of the TE10 tapered waveguide, which will be used in the 4.6 GHz lower hybrid current drive （LHCD） launcher on the EAST, are presented. The calculations are performed in two ways, namely by directly solving the classical coupling wave equations, and by using the simulation code of the high frequency structure simulator （HFSS）. According to the calculations, the voltage standing wave ratio （VSWR） of the designed tapered waveguide can be less than 1.01 within a bandwidth of ±100 MHz.     

Development of Data Acquisition Card Driver for ICRH System on EAST

Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.     

Simultaneous Oxidization of NOx and SO2 by a New Non-thermal Plasma Reactor Enhanced by Catalyst and Additive

The non-thermal plasma as one of the most promising technologies for removing NOx and SO2 has attrm~ted much attention. In this study, a new plasma reactor combined with catalyst and additive was developed to effectively oxidize and remove NOx and SO2 in the flue gas. The experimental results showed that TiO2 could improve the oxidation efficiency of SO2 in the case of applying plasma while having a negative effect on the oxidation process of NO and NOx. With the addition of NH3, the oxidation rates of NOx, NO and SO2 were slightly increased. However, the effect of adding NH3 on NOx oxidation was negative when the temperature was above 200℃.     

Role of Ion Beam Irradiation and Annealing Effect on the Deposition of AlON Nanolayers by Using Plasma Focus Device

AlON nanolayers are synthesized on Al substrate by the irradiation of energetic nitrogen ions using plasma focusing. Samples are exposed to multiple （5, 10, 15, 20 and 25） focus shots. Ion energy and ion number density range from 80 keV to 1.4 MeV and 5.6×10^19 m^- 3 to 1.3×10^19 m ^-3, respectively. Moreover, the effect of continuous annealing （473 K and 523 K） on an AlN surface layer synthesized with 25 focus shots is also examined. The main features of the X-ray diffraction （XRD） patterns with increasing focus shots are： （i） variation in the crystallinity of AlN along （111）, （200） and （311） planes, （ii） increasing average crystallite size of AlN （111） plane, and （iii） stress relaxation observed in AlN （111） and （200） planes. The crystallinity of AlN surface layer is comparatively better at 473 K annealing temperature. A broadened diffraction peak related to an aluminium oxide phase showing weak crystallinity is observed for 15 focus shots while non-bounded oxides are present in all other deposited layers. Raman and Fourier transform infrared spectroscopy （FTIR） analysis confirm the presence of AlN and Al203 for the surface layer annealed at 473 K temperature. Raman analysis shows that the overlapping of AlN and Al2Oa results in the development of residual stresses. Scanning electron microscope （SEM） results demonstrate that the formation of rounded grains （range from 20 nm to 200 nm） and variations in their microstructures features depend on the increasing number of focus shots. Decomposition of larger clusters into smaller ones is observed.     

Simulation of Electron-Beam Generating Plasma at Atmospheric Pressure

As electron-beam generating plasma is widely applied, the software tool EGS4 （Electron-Gamma Shower） was used to simulate the transmission and energy deposition of electron-beam in air. The simulation results indicated that the range of the electron-beam was inversely proportional to the gas pressure in a wide range of gas pressure, and the electron-beam of 200 keV could generate a plasma with a density 10^11 cm^-3 in air of latm. In addition, the energy distribution of the beam-electron and plasma density profile produced by the beam were achieved.     

Effect of Cold Plasma Treatment on Seed Germination and Growth of Wheat简

This study investigated the effect of cold helium plasma treatment on seed germina- tion, growth and yield of wheat. The effects of different power of cold plasma on the germination of treated wheat seeds were studied. We found that the treatment of 80 W could significantly improve seed germination potential （6.0%） and germination rate （6.7%） compared to the control group. Field experiments were carried out for wheat seeds treated with 80 W cold plasma. Com- pared with the control, plant height （20.3%）, root length （9.0%） and fresh weight （21.8%） were improved significantly at seedling stage. At booting stage, plant height, root length, fresh weight, stem diameter, leaf area and leaf thickness of the treated plant were respectively increased by 21.8%, 11.0%, 7.0%, 9.0%, 13.0% and 25.5%. At the same time, the chlorophyll content （9.8%）, nitrogen （10.0%） and moisture content （10.0%） were higher than those of the control, indicating that cold plasma treatment could promote the growth of wheat. The yield of treated wheat was 7.55 t-ha-1, 5.89% more than that of the control. Therefore, our results show that cold plasma has important application prospects for increasing wheat yield.     

Mechanical Properties of Thermoplastic Polyurethanes Laminated Glass Treated by Acid Etching Combined with Cold Plasma

To overcome the problem of interlaminar delamination of thermoplastic polyurethane laminated glass, silicate glass was etched with hydrofluoric acid and thermoplastic polyurethane was then treated with cold plasma. Compared with the untreated samples, the interlaminar shear strength of acid etching samples, cold plasma-treated samples and acid etching combined with cold plasma-treated samples increased by 97%, 84% and 341%, respectively. Acid etching combined with cold plasma-treated samples exhibited a higher flexural strength and strain as compared with the untreated samples. The impact energy of acid etching samples, cold plasmatreated samples and acid etching combined with cold plasma-treated samples increased by 8.7%, 8.1% and 11.6%, respectively, in comparison with the untreated samples. FT-IR analysis showed that a large number of -C-O, CO N and CO O C groups appeared on the surface of cold plasma-treated thermoplastic polyurethane, which resulted in the formation of hydrogen bonds. SEM results showed that some pittings formed on the surface of the silicate glass treated by acid etching, which resulted in the formation of a three-dimensional interface structure between tile silicate glass and polyurethane. Hydrogen bonds combined with the three-dimensional interface between silicate glass and polyurethanes co-improved the mechanical properties of thermoplastic polyurethanes laminated glass.     

Density and temperature of fermions and bosons from quantum fluctuations

A novel method to determine the density and temperature of a system constituted by fermions and/or bosons is proposed based on quantum fluctuations. For fermions system, the results in the limit where the reached temperature T is small and where there is no constraint for the reached temperature T compared to the Fermi energy ~f at a given density p are given, respectively. Quadrupole and multiplicity fluctuation relations are derived in terms of T/6f. We compared the two set results in the limit when Tis much smaller compared to Fermi energy Cf and they are consistent, as expected. The classical limit is also obtained for high temperatures and low densities. For bosons system, quadrupole and multiplicity fluctuations using Landau＇s theory of fluctuations near the critical point for a Bose-Einstein condensate （BEC） at a given density p are derived. As an example, we apply our approach to heavy ion collisions using the Constrained Molecular Dynamics model （CoMD） which includes the fermionic statistics. The multiplicity fluctuation quenching for fermions is found in the model and confirmed by experimental data. To reproduce the available experimental data better, we propose a modification of the collision term in the approach to include the possibility of ct-a collisions. The relevant Bose-Einstein factor in the collision term is properly taken into account. This approach increases the yields of bosons relative to fermions closer to data. Boson fluctuations become larger than one as expected.     

Thermal Analysis and Optimization for Cryopanel of NBI Cryocondensation Pump

Excellent vacuum performance ensures a high beam transmission efficiency of the neutral beam injector （NBI）. The vacuum performance is mainly determined by the cryoperformance of the cryopanel of the cryocondensation pumps which are the main vacuum pumps of NBI. In order to optimize the cryoperformance, the requirements for the temperature distribution and the heat load of the cryopanel are analysed and the factors that affect the cryopanel＇s temperature distribution are studied. The results indicate that the temperature difference of the cryopanel can be reduced by fabricating the cryopanel with high thermal conductivity material, increasing its thickness and cutting the distance between the two upward cooling pipes. The results may be applied to a cryopanel cooled by forced flow liquid helium.     

Reaction mechanisms in massive nuclei collisions and perspectives for synthesis of heavier superheavy elements

We discuss a hardship in synthesis of heaviest super heavy elements in massive nuclei reactions due to the hindrance to complete fusion of reacting nuclei caused on the onset of quasifission process which strongly competes with complete fusion and due to the strong increase of fission yields along the de-excitation cascade of the compound nucleus in comparison with the evaporation residue formation. The hindrance to formation of compound nucleus and evaporation residue is determined by the characteristic of the entrance channel.     

Experimental Study on Indoor Air Cleaning Technique of Nano-Titania Catalysis Under Plasma Discharge

In this study, a new technique of air cleaning by plasma combined with catalyst was proposed, which consisted of electrostatic precipitation, volatile organic compounds （VOCs） decomposition and sterilization. A novel indoor air purifier based on this technique was adopted. The experimental results showed that formaldehyde decomposition by the plasma-catalyst hybrid system was more efficient than that by plasma only, Positive discharge was better than negative discharge in formaldehyde removal. Meanwhile, the outlet concentration of ozone byproduct was effectively reduced by the nano-titania catalyst.     

Structure and Mechanical Properties of CrTiAlN/TiAlN Composite Coatings Deposited by Multi-Arc Ion Plating

CrTiAlN/TiAlN composite coatings were deposited on cemented carbide by using a home-made industrial scale multi-arc ion plating system. The samples were studied by X-ray diffraction, scanning electron microscopy （SEM）, microhardness and ball-on-disk testing. The properties of the CrTiAlN/TiAlN coatings were significantly influenced by the microstructure and the deposition time ratio of TiAlN over CrTiAlN layers. With the increase of deposition time ratio, the microhardness of CrTiAlN/TiAlN increased from 28.6 GPa to 37.5 GPa, much higher than that of CrTiAlN coatings. The friction coefficients of the CrTiAlN/TiAlN coatings were higher than those of CrTiAlN coatings against a cemented carbide ball. The microhardness of the CrTiAlN/TiAlN coatings was changed after annealing at 800 ℃, and the friction coefficients of the annealed coatings were increased against the cemented carbide ball.     

Second Discharge Characteristics of Aluminum Wire Electrical Explosion Under Various Argon Pressures

Electrical wire explosion is a promising method for the preparation of metal nanopowder, but the properties of metal nanopowder are affected by the second discharge process of electrical wire explosion. The second discharge characteristics of aluminum wire electrical ex- plosion under variant argon pressures were studied in a RLC discharge circuit. The results show that the curve of the second discharge voltages versus the pressure presents a U-shape. To clarify the roles of aluminum vapor and argon in the process of the second discharge, a spectrograph and a high speed framing camera were used to study the radiation spectrum and spatial distribution of the electrical explosion plasma. It is observed that argon participates in the second discharge process under low pressure. A discharge channel develops along the surface of the aluminum vapor. Under higher pressure, a second discharge takes place in the aluminum vapor and the discharge channel is inside the aluminum vapor.     

Development of a 140 GHz Steerable Launcher for the HL-2A ECRH System

A new electron cyclotron resonance launcher system has been designed and installed on heating and current drive （ECRH/ECCD） the HL-2A tokamak to inject four beams and enable continuous millimeter-wave beam scanning independently in the toroidal and poloidal direc- tions for ECRH/ECCD experiments. The launcher is connected to four mm-wave lines capable of transmitting high power up to 3 MW with two 1 MW/140 GHz/3 s and two 0.5 MW/68 GHz/1 s beams. Based on ray tracing simulation using the TORAY-GA code, tile scanning range of wave beams is -15~~15~ in the toroidal direction and 0~~10~ in the poloidal one for 140 GHz beams, which could cover half of the cross section of plasmas and can satisfy the requirements of advanced physical experiments. The beam radii in the plasma is 17.1 mm and 20 mm for the two 140 GHz beams and 29.5 nnn for the two 68 GHz beams, respectively, allowing a very high localization of the absorbed power. The performance of the steering system was proven to be reliable and the linearity is perfect between the displacement of drive shaft and rotate angle of mirror. Addition- ally the injection performance of the wave beams was optinfized by simultaneously setting the injection angle and the polarization to realize desirable pure O- or X-mode injection.     

Effect of Implantation Machine Parameters on N^＋ ion Implantation for Upland Cotton（Gossypium hirsutum L.）Pollen

Effect of parameters of ion implantation machine, including ion energy, total dose, dose rate, impulse energy and implantation interval on the pollen grains of upland cotton implanted with nitrogen ion beam were studied. The best parameters were screened out. The results also showed that the vacuum condition before the nitrogen ion implantation does not affect the pollen viability.     

A practical image reconstruction and processing method for symmetrically off-center detector CBCT system

CBCT scanners have been widely used in angiography, radiotherapy guidance, mammography and oral maxillofacial imaging. To cut detector size, reduce manufacturing costs and radiation dose while keeping a reasonable FOV, the flat panel detector can be placed off-center horizontally. This scanning configuration extends the FOV effectively. However, each projection is transversely truncated, bringing errors and artifacts in reconstruction. In this paper, a simple but practical method is proposed for this scanning geometry based on truncation compensation and the modified FDK algorithm. Numerical simulations with jaw phantom were conducted to evaluate the accuracy and practicability of the proposed method. A novel CBCT system for maxillofacial imaging is used for clinical test, which is equipped with an off-center small size flat panel detector. Results show that reconstruction accuracy is acceptable for clinical use, and the image quality appears sufficient for specific diagnostic requirements. It provides a novel solution for clinical CBCT system, in order to reduce radiation dose and manufacturing cost.     

Competition between fusion-evaporation and multifragmentation in central collisions in 58Ni＋4SCa at 25A MeV

The experimental data concerning the 58Ni＋48Ca reaction at Elab（Ni）=25A MeV, collected by using the CHIMERA 4n device, have been analyzed in order to investigate the competition among different reaction mechanisms for central collisions in the Fermi energy domain. As a main criterion for centrality selection we have chosen the flow angle （Snow） method, making an event-by-event analysis that considers the shape of events, as it is determined by the eigenvectors of the experimental kinetic-energy tensor. For the selected central events （8~ow〉60~） some global variables, good to characterize the pattern of central collisions have been constructed. The main features of the reaction products were explored by using different constraints on some of the relevant observables, like mass and velocity distributions and their correlations. Much emphasis was devoted, for central collisions, to the competition between fusion-evaporation processes with subsequent identification of a heavy residue and a possible multifragmentation mechanism of a well defined （if any） transient nuclear system. Dynamical evolution of the system and pre-equilibrium emission were taken into account by simulating the reactions in the framework of transport theories. Different approaches have been envisaged （dynamical stochastic BNV calculations ＋ sequential SIMON code, QMD, CoMD, etc.）. Preliminary comparison of the experimental data with BNV calculations shows reasonable agreement with the assumption of sequential multifragmentation emission in the mass region of IMFs close to the heavy residues. Possible deviations from sequential processes were found for those IMFs in the region of masses intermediate between the mass of heavy residues and the mass of light IMFs. Further simulations are in progress. The experimental analysis will be enriched also by information obtained inspecting the IMF-IMF correlation function, in order to elucidated the nature of space-time decay property of the emitting source associated with events having the largest IMF multiplicity.     

Magnetic Field Improvement in End Region of Rectangular Planar DC Magnetron Based on Particle Simulation

For a rectangular planar direct current （DC） magnetron, anomalous target erosion may occur in the curve-out region and inner side of the curved region. One key factor is that the magnetic field in the end region is weaker than that in the straight region, and another important factor may be that there is a circumferential component of the magnetic field in the curved region. Through a calculation of three-dimensional magnetic field for the rectangular magnetron, a magnet structure shimmed by permanent magnet bars and ferromagnetic bars is proposed to solve the above problems. Through a three-dimensional non-self-consistent particle simulation and the Yamamura/Tawara formula, the target erosion profile could be predicted. The simulation results show that for an improved uniformity in magnetic field, the entire target utilization could be much enhanced.     

Grafting Silane onto Silicate Glass Surface Treated by DBD in Air

Dielectric barrier discharge plasma in air was used to modify glass surface to induce the graft of silane onto the treated surface to increase the possibility of biomolecule immobilization. The plasma treated glass had been characterized by scanning electron microscopy （SEM）, Fourier transform infrared attenuated total reflection spectroscopy, X-ray photoelectron spectroscopy （XPS） and surface water contact angle measurement. The validity of grafting silane onto glass surface was approved by the analysis of water contact angle measurement, SEM and XPS. The grafted silane content was measured by visible absorption spectroscopy using acid Orange-7. It is shown that the grafting density of silane for glass samples increases significantly after plasma treatment.