Polybinaphthyls incorporating chiral (R) or (S)-2,2′-binaphthyland oxadiazole moieties by Stille reaction

Chiral polymers P-1 and P-2 were prepared by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-1) with 2,5-bis[(4-tributylstannyl)phenyl]-1,3,4-oxadiazole (M-2) via Pd(PPh₃)₄ catalyzed Stille coupling reaction. 1,3,4-Oxadiazole unit not only has high electron affinity, high thermal and oxidative stability, but also serves as a good chromophore. Polymers have strong blue fluorescence due to the efficient energy migration from the extended π-electronic structure of the polymers to the chiral binaphthyl core and can be expected to have potential application in the materials of fluorescent sensors. Circular dichroism (CD) spectra of polymers P-1 and P-2 are almost identical except that they gave opposite signals at each wavelength. The long wavelengths CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and a high rigidity of the polymer backbone.     

Polybinaphthyls incorporating chiral 2,2′-binaphthyl and isoquinoline moieties by Sonogashira reaction

Polymers P-1, P-2, P-3, P-4 and P-5 were synthesized by the polymerization of 5,8-bis(ethynyl)isoquinoline (M-1) with (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-2), (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-2), (R)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-3), (S)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-3), and rac-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl (M-4) under Sonogashira reaction, respectively. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. CD spectra of polymers P-1 and P-2, P-3 and P-4 are almost identical except that they gave opposite signals at each wavelength. The long wavelength CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and the helical backbone in the polymer chain. All five polymers have strong blue-green fluorescence due to the efficient energy migration from the extended π-electronic structure of the repeating unit of the polymers to the chiral binaphthyl core and are expected to provide understanding of structure-property relationships of the chiral conjugated polymers.     

Synthesis of conjugated polymers with broad absorption bands and photovoltaic properties as bulk heterojuction solar cells

Two new broad absorbing alternating copolymers, poly[1-(2,6-diisopropylphenyl)-2,5-bis(2-thienyl)pyrrole-alt-4,7-bis(3-octyl-2-thienyl)benzothiadiazole] (PTPTTBT-P1) and poly[1-(p-octylphenyl)-2,5-bis(2-thienyl)pyrrole-alt-4,7-bis(3-octyl-2-thienyl)benzothiadiazole] (PTPTTBT-P2), were prepared via Suzuki polycondensation with high yields. The two polymers were found to show characteristic absorption in the visible region of the solar spectrum. Interestingly the absorption of PTPTTBT-P1 was found to cover the visible region from 350 to 650 nm with the broad and flat absorption maximum from 440 to 510 nm in film and the absorption of PTPTTBT-P2 was found to cover the visible region from 350 to 950 nm with the relatively distinct absorption maxima at 425 and 522 nm and very weak absorption maximum at 832 nm in film. The electrochemical band gaps of the polymers were calculated to be 1.88 eV and 1.87 eV, respectively, while the optical band gaps of the polymers were calculated to be 1.94 eV and 1.87 eV, respectively. The photovoltaic properties of polymers were investigated with bulk heterojunction (BHJ) solar cells fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM(1:5 wt%)/TiOx/Al configurations. The maximum power conversion efficiency (PCE) of the solar cell composed of PTPTTBT-P1:PC₇₀BM as an active layer was 1.57% with current density (J_sc) of 8.17 mA/cm², open circuit voltage (V_oc) of 0.52 V and fill factor (FF) of 36%.     

Synthesis, electroluminescence, and photovoltaic properties of dendronized poly(p-phenylene vinylene) derivatives

Two dendronized poly(p-phenylene vinylene) (PPV) derivatives, ED-PPV and BB-PPV, have been successfully synthesized according to the Gilch route. The obtained polymers possess excellent solubility in common solvents, good thermal stability with 5% weight loss temperature of more than 340 °C. The weight-average molecular weight (M_w) and polydispersity index (PDI) of ED-PPV and BB-PPV are in the range of (1.26-2.34)×10⁵ and 1.37-1.45, respectively. Polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al devices were fabricated, and the PLEDs emitted green-yellow light. The turn-on voltages of the PLEDs based on ED-PPV and BB-PPV were approximately 4.3, and 4.5 V, respectively. The PLED devices of ED-PPV exhibited the maximum luminance of about 157 cd/m² at 10.5 V. Photovoltaic cells with the configuration of ITO/PEDOT:PSS/polymer:C₆₀ (1:1)/Al were also fabricated, and the energy conversion efficiency of the devices based on ED-PPV and BB-PPV was measured to be 0.58, and 0.014%, respectively, under the white light at 75 mW/cm².     

Synthesis of laterally attached side-chain liquid crystalline poly(p-phenylene vinylene) and polyfluorene derivatives for the application of polarized electroluminescence

Two series of poly(p-phenylene vinylene) and polyfluorene derivatives (PPV1-PPV4 and PF1-PF5) containing laterally attached penta(p-phenylene) mesogenes were synthesized and characterized. These polymers show nematic liquid crystalline behavior. The optical properties of the polymers were investigated by UV-vis absorption and photoluminescence spectrometers and these polymers were fabricated to form the polarized electroluminescent devices using poly(ethylenedioxythiophene)-poly(styrene sulfonic acid) (PEDOT-PSS) as an alignment layer. In the series of poly(p-phenylene vinylene) derivatives, polymer PPV4 offered the best EL device performance. It emitted yellow light at 588 nm at 4 V. The maximum brightness was about 1337 cd/m² at 9 V with a polarized ratio of 2.6. In another series of polyfluorene derivatives, PF4 offered the best EL device performance with the polarized ratio of 12.4 and a maximum luminescence of 1855 cd/m². In the case of polarized white light, as a consequence of blending small amount of PF4 and PF5 with a host polymer PF2, polarized ratio of up to 10.2 and a maximum brightness of 2454 cd/m² have been attained. The aligned films exhibited pronounced polarized ratio, implying that the polymers exhibit potential for linearly polarized LED application.     

New π-conjugated polymers containing oxazole in the main chain: Optical and electrochemical properties

Oxazole-containing π-conjugated polymers, an alternating copolymer of 9,9-dioctylfluorene-2,7-diyl and 2,5-bis(p-phenylene)oxazole (P(Flu-DPOxz)) and an alternating copolymer of 2,5-dialkoxy-p-phenylene and 2,5-bis(p-phenylene(oxazole)) (P(ROPh-DPOxz)), have been synthesized by Pd-catalyzed organometallic polycondensation. They were soluble in organic solvents, and had number average molecular weights of 18?600 and 24?700, respectively, in GPC analysis. P(Flu-DPOxz) and P(ROPh-DPOxz) showed UV-vis absorption peaks at about 380 nm in CHCl₃. Powder XRD patterns and UV-vis data of the polymers indicated that the polymer solid was amorphous. The polymers were photoluminescent both in chloroform and in solid. In chloroform, the emission peak appeared at about 420 nm with a high quantum yield of about 70%. The polymers were electrochemically active, and electrochemical data revealed that the oxazole unit behaved as a moderate electron-accepting unit.     

Synthesis and properties of various PPV derivatives with phenyl substituents

New electroluminescent polymers with various phenyl groups, poly[2-dimethyl(octyl)silyl-5-(4-(dimethyl(octyl)silyl)phenyl)-1,4-phenylenevinylene] (P1), poly[2,5-bis(4-(dimethyl(octyl)silyl)phenyl)-1,4-phenylenevinylene] (P2), poly[2,5-bis(9,9-dihexylfluorenyl)-1,4-phenylenevinylene] (P3), and poly[2,5-bis(4-(4-(2-etylhexyloxy)phenyl)phenyl)-1,4-phenylenevinylene] (P4), have been synthesized by the Gilch polymerization. The maximum absorption peaks of P1-P4 appeared at 388-423 nm in THF solution, and are red-shifted to 404-425 nm in solid thin film. The photoluminescence (PL) emission spectra of P1-P4 show a maximum peak at 482-503 nm in THF solution and at 521-549 nm as the solid film state. The emission spectra in the solid film state are more red-shifted over 40 nm, and the full width at half maximum (fwhm) was 30 nm greater than the solution conditions. The polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT/polymer/Al emitted light with maximum peaks at around 517-546 nm. The various phenyl substituents, with intermolecular interactions in the solid film state, can introduce the color tuning and device performance enhancement of the conjugated polymer as an emissive layer in PLED.     

Synthesis of hydroxyphenylglycine-derived novel poly(silylenevinylenephenyleneethynylene)s

The hydrosilylation polymerization of d-(−)-p-hydroxyphenylglycine-derived diethynyl monomers 1p and 1m with dihydrosilanes Si1 and Si2 was carried out using RhI(PPh₃)₃ as a catalyst to give optically active novel poly(silylenevinylenephenyleneethynylene)s [(E)-poly(1p-Si1), (E)-poly(1p-Si2), (E)-poly(1m-Si1), (E)-poly(1m-Si2), and (Z)-poly(1p-Si1)] with number-average molecular weights ranging from 2800 to 17,000 in 41-92% yields. Polymers having (E)- and (Z)-olefin moieties were obtained, wherein the (E)-/(Z)-ratios depended on the reaction conditions. The UV-vis absorption edge of (E)-poly(1p-Si1) was positioned at a wavelength longer than that of (Z)-poly(1p-Si1), indicating that (E)-vinylene-linkage extends the conjugation more largely than the (Z)-counterpart. This was also confirmed by fluorescence spectroscopy. Alkaline hydrolysis of ester moieties of these polymers gave the corresponding polymers having carboxy groups. The (E)-polymers showed different solubility in hydrophobic solvents before and after hydrolysis, but the non-hydrolyzed and hydrolyzed (Z)-polymers exhibited the same solubility.     

Synthesis and properties of cyclopentadithiophene-based poly(silarylenesiloxane) derivatives

Poly(silarylenesiloxane) derivatives with 4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene moiety, bearing dimethyl- (P1), methylphenyl- (P2) and diphenyl- (P3) substituents on silyl moieties, were prepared via polycondensation of the corresponding disilanol monomers, that is, 2,6-bis(dimethylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M1), 2,6-bis(methylphenylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M2), and 2,6-bis(diphenylhydroxysilyl)-4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene (M3), respectively. P1-P3 exhibited the good solubility in common organic solvents, such as benzene, toluene, chloroform, dichloromethane, THF, and so on. The glass transition temperatures (T_gs) of P1, P2 and P3 were determined by differential scanning calorimetry to be 56, 97 and 137 °C, respectively, depending on the substituent on the silyl moieties. No melting temperatures (T_ms) of P1, P2 and P3 were observed, suggesting the obtained P1-P3 are amorphous polymers. The temperatures at 5% weight loss (T_d5s) of P1, P2 and P3 were 460, 459 and 479 °C, respectively, indicating that the larger number of phenyl group on the silyl moieties resulted in the better thermostability. Bathochromic and hyperchromic effects were observed in the absorption and fluorescence spectra by introducing silyl substituents onto 4,4-dimethylcyclopenta[2,1-b:3,4-b′]dithiophene moiety. In addition, the bathochromic shift of the maximum absorption (λ_abs) and the increase in the fluorescence quantum yield (Φ_F) were observed by the introduction of phenyl group onto the silyl moieties.     

Synthesis, characterization, and high gas permeability of poly(diarylacetylene)s having fluorenyl groups

Diarylacetylenes having fluorenyl groups and other substituents (trimethylsilyl, t-butyl, bromine, fluorine) (1a-1) were polymerized with TaCl₅-n-Bu₄Sn. Monomers 1a-l produced high molecular weight polymers 2a-l (M_w 5.1 × 10⁵-1.3 × 10⁶) in 12-59% yields. All of the polymers were soluble in common organic solvents, and gave tough free-standing membranes by the solution casting method. The onset temperatures of weight loss of polymers 2a-l in air were over 400 °C, indicating considerably high thermal stability. All the polymer membranes showed high gas permeability; e.g., the oxygen permeability coefficient (PO₂) of 2a was as large as 4800 barrers. Membrane 2d possessing two fluorine atoms at meta and para positions of the phenyl ring showed the highest oxygen permeability (PO₂ = 6600 barrers) among the present polymers.     

Aromatic diamine-based benzoxazines and their high performance thermosets

Four high-purity aromatic diamine-based benzoxazines (13-16), which could not easily be synthesized by traditional approaches, were successfully synthesized by a facile, widely useful three-step synthetic method using four typical aromatic diamines - 4,4′-diamino diphenyl methane (1), 4,4′-diamino diphenyl sulfone (2), 2,2-bis(4-(4-aminophenoxy)phenyl)propane (3), and bis(4-(4-aminophenoxy)phenyl)ether (4), respectively, as starting materials. The structures of the monomers (5-16) were confirmed by ¹H, ¹³C, ¹H-¹H and ¹H-¹³C NMR spectra. Their high performance thermosets, P(13-16), were obtained by thermal curing of benzoxazines (13-16), and their properties were studied and compared with polymer derived from bis(3,4-dihydro-2H-3-phenyl-1,3-benzoxazinyl)methane (F-a), a typical aromatic biphenol-based benzoxazine. Among the benzoxazines, 13 and F-a are constitutional isomers, but the T_g value and 5% decomposition temperature of P(13) are 53 and 111 °C, respectively, higher than those of P(F-a), demonstrating the power of the molecule-approach to enhance the thermal properties. Because of the large varieties of aromatic diamines, this approach can increase the molecule-design flexibility of benzoxazines.     

Novel poly(diphenylacetylene)s with both alkyl and silyl groups as gas permeable membranes: Synthesis, desilylation, and gas permeability

Diphenylacetylenes having a dimethyloctylsilyl group and an alkyl group at para positions [Me₂n-C₈H₁₇SiC₆H₄CCC₆H₄R; R = H (1a), i-Pr (1b), t-Bu (1c), n-Bu (1d)] and having only an alkyl group [PhCCC₆H₄R; R = i-Pr (1B), t-Bu (1C)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2C). The formed polymers afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of Si-containing membranes (2a-d) was carried out with trifluoroacetic acid to give the desilylated membranes (3a-d). The permeability of these membranes to O₂, N₂, and CO₂ were determined. All the Si-containing membranes exhibited almost the same gas permeability. The desilylation of Si-containing membranes of 2a-c resulted in large increase of gas permeability. No apparent increasing of gas permeability was observed in the desilylation of 2d. To clarify the effects of desilylation, CO₂ diffusivity (D(CO₂)), CO₂ solubility (S(CO₂)), and fractional free volume (FFV) of the polymer membranes were investigated. The S(CO₂) values of desilylated membranes were much larger than that of Si-containing counterparts. The D(CO₂) and FFV of membranes of 2a-c increased through desilylation. The desilylated membrane of 3d had small D(CO₂) value and almost the same FFV compared with 2d. Further, the comparison of the permeability between three types of membranes with the same chemical structure revealed that the microvoids were not generated by the desilylation of membranes of poly(diphenylacetylene)s containing alkyl groups.     

Fluorescent chemosensor for metal ions based on optically active polybinaphthyls and 1,3,4-oxadiazole

Linear chiral polymers P-1 and P-2 were synthesized by the polymerization of (R)-5,5′-dibromo-6,6′-di(4-methylphenyl)-2,2′-bisoctoxy-1,1′-binaphthyl (R-M-1) with 2,5-di(4-vinylphenyl)-1,3,4-oxadiazole (M-2) and 2,5-di(4-tributylstannylphenyl)-1,3,4-oxadiazole (M-3) via Heck and Stille cross-coupling reaction, respectively. The chiral conjugated polymer P-1 can show strong green-blue fluorescence, and the chiral polymer P-2 shows strong blue fluorescence. While the conjugated polymers P-1 and P-2 were used as fluorescent chemosensor for metal ions, their fluorescence can be efficiently quenched on the addition of different metal ions. The obvious quenching effect of the polymers P-1 and P-2 indicates that the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT) between the polymer backbone and receptor-ions in the main chain of fluorescent chemosensor can lead to the pronounced fluorescence quenching. The results also show that the chiral polymers P-1 and P-2 incorporating 1,3,4-oxadiazole moiety as the recognition site can act as a special fluorescent chemosensor for the appropriate detection of the sensitive and selective sense of metal ions.     

Alkyloxy substituted organic dyes for high voltage dye-sensitized solar cell: Effect of alkyloxy chain length on open-circuit voltage

Three novel organic dyes (SB1, SB2, and SB3) containing 4-(hexyloxy)-N-(4-(hexyloxy)phenyl)-N-phenylaniline as electron donor and cyanoacrylic acid as electron acceptor bridged by alkyloxy (methyl = SB1, propyl = SB2 and hexyl = SB3) substituted p-phenylenevinylene linkers have been synthesized. Density functional theory (DFT) has employed to study electron distribution and intramolecular charge transfer. Increase in alkyl chain length in alkyloxy substituent leads to increase in open-circuit voltage (V_OC), which is found to be related to the increased electron lifetime at open-circuit condition. Under AM 1.5 G 1 sun light illumination (100 mW/cm²), an optimized SB3-sensitized cell show a short-circuit photocurrent density (J_SC) of 12.83 mA/cm², an open-circuit voltage (V_OC) of 0.745 V and a fill factor (FF) of 0.64, corresponding to an overall conversion efficiency (η) of 6.12%. Little degradation in η observed over 40 days is indicative of long-term stability of the SB-series dyes.     

Polymerization of cysteine functionalized thiophenes

Different synthetic pathways leading to polythiophenes (PTs) containing units derived from methyl N-(tert-butoxycarbonyl)-S-3-thienyl-l-cysteinate (1) and methyl N-(tert-butoxycarbonyl)-S-(2-thien-3-ylethyl)-l-cysteinate (2) were investigated. The oxidative coupling with FeCl₃ applied to N-deprotected monomer 1 generates a chemically fleeting PT, whereas when applied to N-deprotected monomer 2 generates a mixture of oligomers. Two co-polymers bearing cysteine moieties, poly{[methyl N-(tert-butoxycarbonyl)-S-3-thienyl-l-cysteinate]-co-thiophene} (co-PT1) and poly{[methyl N-(tert-butoxycarbonyl)-S-(2-thien-3-ylethyl)-l-cysteinate]-co-thiophene} (co-PT2), were eventually synthesized through Stille coupling of 2,5-bis(trimethylstannyl)thiophene and 2,5-dibromo derivative of compound 1 and through the post-functionalization with protected cysteine of a tosylate co-polymer, poly{[2-(3-thienyl)ethyl 4-methylbenzenesulfonate]-co-thiophene} (co-PTTs). UV-vis, CD, NMR and GPC analyses evidenced that these polymers are able to form chiral self-assembling structures, due to the formation of a hydrogen bond network and to π-stacks, not only in the solid state but also in solution.     

Metallocene-catalyzed synthesis of polyethylenes with side-chain triarylamines: Effects of catalyst structure and triarylamine functionality

The copolymerization of ethylene with 8-triarylamine (TAA) substituted 1-octene monomers (TAA = triphenylamine (M1), N,N-diphenyl-m-tolylamine (M2), N,N-diphenyl-1-naphthylamine (M3)) using various types of group 4 single-site catalytic systems (Cp₂ZrCl₂ (C1), rac-EBIZrCl₂ (C2), rac-SBIZrCl₂ (C3), i-PrCpFluZrCl₂ (C4), Me₂Si(η⁵-C₅Me₄)(η¹-N-^tBu)TiCl₂ (C5)) was investigated to prepare functionalized polyethylene with side-chain TAA groups. The metallocene/methylaluminoxane (MAO) catalytic systems (C1-C4) efficiently lead to the production of high-molecular-weight poly(ethylene-co-M1). While the C4/MAO catalytic system shows the highest comonomer response, the C5/MAO system exhibits the poor compatibility with the M1 comonomer. Copolymerization results of ethylene with M1-M3 using C4/MAO indicate that M1-M3 are well tolerated by both the cationic active species of C4 and MAO cocatalyst, giving rise to the copolymers with high levels of activity and molecular weight. Inspection of the aliphatic region of the ¹³C NMR spectra of the copolymers (P1-P3) having ca. 11 mol% of M1-M3, respectively, reveals the presence of isolated comonomer units with prevailing [EEMEE] monomer sequences in the polymer chain. UV-vis absorption and PL spectra exhibit an apparent low-energy band broadening for P1 and P2 indicative of intrachain aggregate formation. Whereas P2 and P3 undergo completely reversible one-electron oxidation process, P1 shows relatively poor oxidational stability.     

Fluorescence sensors based on chiral polymer for highly enantioselective recognition of phenylglycinol

Chiral polymer P-1 incorporating (R,R)-salen-type unit was synthesized by the polymerization of (R,R)-1,2-diaminocyclohexane with 2,5-dibutoxy-1,4-di(5-tert-butylsalicyclaldehyde)-phenylene (M-1) via nucleophilic addition-elimination reaction, and chiral polymer P-2 incorporating (R,R)-salan-type unit could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response of two chiral polymers P-1 and P-2 on (R)- or (S)-phenylglycinol were investigated by fluorescence spectra. The fluorescence intensities of two chiral polymers P-1 and P-2 show gradual enhancement upon addition of (R)- or (S)-phenylglycinol and keeps nearly linear correlation with the concentration molar ratios of (R)- or (S)-phenylglycinol. But both P-1 and P-2 exhibited more sensitive response signals for (S)-phenylglycinol. The values of enantiomeric fluorescence difference ratio (ef) are 1.84 and 2.05 for P-1 and P-2, respectively. The results also showed that two chiral polymers P-1 and P-2 can also be used as fluorescence sensors for enantiomer composition determination of phenylglycinol.     

Polymerization of o-diethynylbenzene and its derivatives controlled by transition metal catalyst systems

Polymerization of o-diethynylbenzene (1) by Rh and Ta catalysts resulted in the formation of structurally different polymers depending on the kind of catalyst. When a Rh catalyst was used, insoluble cross-linked poly(1) was formed, mainly consisting of alternating double bonds and the unreacted ethynyl group along with indene-type structure formed by intramolecular cyclization as a minor component. A Ta catalyst completely consumed both ethynyl groups in the polymerization of 1 to afford mainly highly cross-linked poly(1) containing trisubstituted benzene unit via intermolecular cyclization. 1-Ethynyl-2-phenylethynylbenzene (2) was polymerized by W and Mo catalysts to give soluble polymers with M_n of 6300-71,900 in good yields. Poly(2) obtained by Mo catalysts had alternating double bonds in the main chain and o-(phenylethynyl)phenyl group as side chains. Poly(2) formed by W catalysts predominantly contained a similar main-chain structure and also possessed the naphthalene-type cyclic unit formed by cyclization of the adjacent diethynyl groups as a minor part.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Synthesis and gas permeation properties of various Si-containing poly(diarylacetylene)s and their desilylated membranes

Diarylacetylene monomers having trimethylsilyl groups and other substituents (substituted biphenyl, 1a and 1b; trimethylsilylmethylphenyl, 1c-e) were synthesized and polymerized with TaCl₅-n-Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s (2a-d). Polymers 2a-c had high molecular weights and were soluble in common organic solvents. Free-standing membranes of 2a-c as well as previously reported 2f-h were prepared by the solution-casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid to afford 3a, 3b, and 3f-h. Upon desilylation, biphenyl-containing membranes became less permeable (3a, b), whereas fluorene-containing membranes became more permeable (3f-h). In particular, 3h exhibited extremely high gas permeability (PO₂ = 9800 barrers), which is about the same as that of poly(1-trimethylsilyl-1-propyne). Desilylated membranes 3a and 3f-h showed different gas permeability from that of polymers 2i-k which have the identical chemical structures and obtained directly by the polymerization of the corresponding monomers.