Hydrogen production using Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564)

Fermentative hydrogen production was carried out using Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564). This work investigates the effects of initial substrate concentration, initial medium pH, and temperature. The hydrogen yield was about 3.1 mol (mol glucose)⁻¹ when starting with an initial glucose concentration of 10 gl⁻¹ and initial a pH of 6.0 ± 0.2 at a temperature of 37 °C. The volume of hydrogen produced decreased when higher initial glucose concentrations were applied. The most suitable conditions for hydrogen production in a batch reactor were observed at initial pH 6.0 ± 0.2 and 37 °C.     

Statistical optimization of biohydrogen production from sucrose by a co-culture of Clostridium acidisoli and Rhodobacter sphaeroides

Statistically based experimental designs were applied to optimize the fermentation process parameters for hydrogen (H₂) production by co-culture of Clostridium acidisoli and Rhodobacter sphaeroides with sucrose as substrate. An initial screening using the Plackett–Burman design identified three factors that significantly influenced H₂ yield: sucrose concentration, initial pH, and inoculum ratio. These factors were considered to have simultaneous and interdependent effects. A central composite design and response surface analysis were adopted to further investigate the mutual interactions among the factors and to identify the values that maximized H₂ production. The optimal substrate concentration, initial pH, and inoculum ratio of C. acidisoli to R. sphaeroides were 11.43 g/L sucrose, 7.13, and 0.83, respectively. Using these optimal culture conditions, substrate conversion efficiency was determined as 10.16 mol H₂/mol sucrose (5.08 mol H₂/mol hexose), which was near the expected value of 10.70 mol H₂/mol sucrose (5.35 mol H₂/mol hexose).     

Application of rice rhizosphere microflora for hydrogen production from apple pomace

The combination of substrate materials and bacteria is an important factor affecting conversion technology for biological hydrogen production. We performed anaerobic hydrogen fermentation of apple pomace wastes using rhizosphere bacterial microflora of rice as the parent inoculum. In the vial test, the optimal condition for hydrogen fermentation was initial pH 6.0, 35 °C, and 73.4 g pomace per liter of medium (equivalent to 10 g-hexose/L). In the batch experiment (pH 6.0, temperature 35 °C) the hydrogen yield reached 2.3 mol-H₂/mol-hexose. The time course of biogas production and PCR-DGGE analysis suggest that Clostridium spp. decomposed degradable carbohydrates rapidly and a part of the refractory carbohydrate (e.g. pectin) gradually in the apple pomace slurry. In addition to hydrogen, volatile fatty acids (VFAs) were produced in the anaerobic fermentation of apple pomace, which can be a substrate for methane fermentation. The rice rhizosphere can be a promising source of inoculum bacteria for hydrogen fermentation in combination with plant material waste like apple pomace.     

High biohydrogen yielding Clostridium sp. DMHC-10 isolated from sludge of distillery waste treatment plant

A mesophilic high hydrogen producing strain DMHC-10 was isolated from a lab scale anaerobic reactor being operated on distillery wastewater for hydrogen production. DMHC-10 was identified as Clostridium sp. on the basis of 16S rRNA gene sequencing. Various medium components (carbon and nitrogen sources) and environmental factors (initial pH, temperature of incubation) were optimized for hydrogen production by Clostridium sp. DMHC-10. The strain, in late exponential growth phase, showed maximum hydrogen production (3.35 mol-H₂ mol⁻¹ glucose utilized) at 37 °C, pH 5.0 in a medium supplemented with organic nitrogen source. Butyric acid to acetic acid ratio was ca. 2.3. Hydrogen production declined when organic nitrogen was replaced with inorganic nitrogen.     

Optimization of conditions for hydrogen production from complex dairy wastewater by anaerobic sludge using desirability function approach

Present study deals with the multiple-response optimization for biohydrogen production using anaerobic sludge and outstanding approach to overcome the drawbacks of conventional response surface methodology (RSM). Dairy wastewater was used as source in batch fermentation was followed for this study. Response surface methodology (RSM), based on a three level, four variable Box–Behnken design, was employed to obtain the best possible combination of substrate concentration, pH, COD/N ratio and COD/P ratio for maximum H₂ yield (HY) and specific hydrogen production rate (SHPR). Experimental data were evaluated by applying RSM integrating a desirability function approach. The optimum H₂ yield and SHPR conditions were: substrate concentration 15.3 g COD/L, pH 5.5, COD/N ratio 100.5 and COD/P ratio 120 with maximum overall desirability D of 0.94. The confirmation experiment under these optimal condition showed a HY and SHPR of 13.54 mmol H₂/g COD and 29.91 mmol H₂/g-VSS.d, respectively. This was only 0.22% and 0.20%, respectively, different from the predicted values, suggesting that the desirability function approach with RSM was a useful technique to get the maximum H₂ yield and SHPR simultaneously.     

Fermentative hydrogen production by the newly isolated Clostridium beijerinckii Fanp3

A hydrogen producing strain newly isolated from anaerobic sludge in an anaerobic bioreactor, was identified as Clostridium beijerinckii Fanp3 by 16S rDNA gene sequence analysis and detection by BioMerieux Vitek. The strain could utilize various carbon and nitrogen sources to produce hydrogen, which indicates that it has the potential of converting renewable wastes into hydrogen. In batch cultivations, the optimal initial pH of the culture medium was between 6.47 and 6.98. Using 0.15 M phosphate as buffer could alleviate the medium acidification and improve the overall performance of C. beijerinckii Fanp3 in hydrogen production. Culture temperature of 35 °C was established to be the most favorable for maximum rate of hydrogen production. The distribution of soluble metabolic products (SMP) was also greatly affected by temperature. Considering glucose as a substrate, the activation energy (E_a) for hydrogen production was calculated as 81.01 kcal/mol and 21.4% of substrate energy was recovered in the form of hydrogen. The maximal hydrogen yield and the hydrogen production rate were obtained as 2.52 mol/mol-glucose and 39.0 ml/g-glucose h⁻¹, respectively. These results indicate that C. beijerinckii Fanp3 is an ideal candidate for the fermentative hydrogen production.     

Fermentative hydrogen production from cassava stillage by mixed anaerobic microflora: Effects of temperature and pH

Fermentative hydrogen production from cassava stillage was conducted to investigate the influences of temperature (37 °C, 60 °C, 70 °C) and initial pH (4–10) in batch experiments. Although the seed sludge was mesophilic anaerobic sludge, maximum hydrogen yield (53.8 ml H₂/gVS) was obtained under thermophilic condition (60 °C), 53.5% and 198% higher than the values under mesophilic (37 °C) and extreme-thermophilic (70 °C) conditions respectively. The difference was mainly due to the different VFA and ethanol distributions. Higher hydrogen production corresponded with higher ratios of butyrate/acetate and butyrate/propionate. Similar hydrogen yields of 66.3 and 67.8 ml H₂/gVS were obtained at initial pH 5 and 6 respectively under thermophilic condition. The total amount of VFA and ethanol increased from 3536 to 7899 mg/l with the increase of initial pH from 4 to 10. Initial pH 6 was considered as the optimal pH due to its 19% higher total VFA and ethanol concentration than that of pH 5. Homoacetogenesis and methonogenesis were very dependent on the initial pH and temperature even when the inoculum was heat-pretreated. Moreover, a difference between measured and theoretical hydrogen was observed in this study, which could be attributed to homoacetogenesis, methanogenesis and the degradation of protein.     

Dark fermentative biohydrogen production by mesophilic bacterial consortia isolated from riverbed sediments

Dark fermentative bacterial strains were isolated from riverbed sediments and investigated for hydrogen production. A series of batch experiments were conducted to study the effect of pH, substrate concentration and temperature on hydrogen production from a selected bacterial consortium, TERI BH05. Batch experiments for fermentative conversion of sucrose, starch, glucose, fructose, and xylose indicated that TERI BH05 effectively utilized all the five sugars to produce fermentative hydrogen. Glucose was the most preferred carbon source indicating highest hydrogen yields of 22.3 mmol/L. Acetic and butyric acid were the major soluble metabolites detected. Investigation on optimization of pH, temperature, and substrate concentration revealed that TERI BH05 produced maximum hydrogen at 37 °C, pH 6 with 8 g/L of glucose supplementation and maximum yield of hydrogen production observed was 2.0–2.3 mol H₂/mol glucose. Characterization of TERI BH05 revealed the presence of two different bacterial strains showing maximum homology to Clostridium butyricum and Clostridium bifermentans.     

Hydrogen production by Escherichia coli ΔhycA ΔlacI using cheese whey as substrate

This study reports a fermentative hydrogen production by Escherichia coli using cheese whey as substrate. To improve the biohydrogen production, an E. coli ΔhycA ΔlacI strain (WDHL) was constructed. The absence of hycA and lacI genes had a positive effect on the biohydrogen production. The strain produced 22% more biohydrogen in a shorter time than the wild-type (WT) strain. A Box-Behnken experimental design was used to optimize pH, temperature and substrate concentration. The optimal initial conditions for biohydrogen production by WDHL strain were pH 7.5, 37 °C and 20 g/L of cheese whey. The specific production rate was improved from 3.29 mL H₂/optical density at 600 nm (OD_600nm) unit-h produced by WDHL under non-optimal conditions to 5.88 mL H₂/OD_600nm unit-h under optimal conditions. Using optimal initial conditions, galactose can be metabolized by WDHL strain. The maximum yield obtained was 2.74 mol H₂/mol lactose consumed, which is comparable with the yield reached in other hydrogen production processes with Clostridium sp. or mixed cultures.     

Effect of temperature on anaerobic fermentative hydrogen gas production from feedlot cattle manure using mixed microflora

Hydrogen production from the anaerobic fermentation of feedlot cattle manure was examined in batch cultures over a temperature range from 36 to 60 °C at a pH of 5.2. The amount of hydrogen produced increased with temperature to a maximum of 65 L H₂ kg TS⁻¹ at 52 °C. At temperatures > 52 °C, acetate was the main volatile fatty acid (VFA) accumulated, while at <52 °C butyrate accumulated the most. Formate was detected in the 56 and 60 °C treatments but was absent in all others. Thermophilic conditions resulted in the highest hydrogen production rates, with maximum hydrogen production occurring 52 °C. Changing incubation temperature by small (4 °C) increments up or down from 52 °C resulted in changes in the metabolic flux (conversion of substrate to VFA and gaseous products) of the anaerobic digestion system. These findings indicate that the hydrogen production potential of anaerobic systems utilizing heat treated cattle manure as inoculum is affected greatly by incubation temperature.     

Utilization of palm kernel cake as a renewable feedstock for fermentative hydrogen production

Fermentative hydrogen generation was studied using palm kernel cake (PKC) as sustainable cellulosic biomass. PKC was subjected to an acid hydrolysis approach using dilute H₂SO₄ (7% v/v). PKC hydrolysate obtained was then diluted (70%) and used as a substrate for hydrogen generation. Chemical analysis showed that the main fermentable sugars in diluted PKC hydrolysate were glucose, xylose and mannose with the concentrations of 2.75 g/L, 2.60 g/L and 27.75 g/L, respectively. Hydrogen production was carried out by the cultivation of Clostridium acetobutylicum YM1 on PKC hydrolysate. The effect of incubation temperature, the initial pH of culture medium and microbial inoculum size on hydrogen production was studied using a statistical model. The analysis of the model generated showed that the initial pH value of the culture medium and inoculum size had significant effects on the hydrogen production. The study showed that the optimum conditions for the biohydrogen production were 30.57 °C temperature, pH 5.5 and 20% inoculum size. A verification experiment was performed in the optimum conditions determined. Experimental results of the verification test showed that a cumulative hydrogen volume of 1575 ml/L was generated with consuming 2.75 g/L glucose, 2.20 g/L xylose and 16.31 g/L mannose.     

Simultaneous production of hydrogen and ethanol from waste glycerol by Enterobacter aerogenes KKU-S1

Factors affecting simultaneous hydrogen and ethanol production from waste glycerol by a newly isolated bacterium Enterobacter aerogenes KKU-S1 were investigated employing response surface methodology (RSM) with central composite design (CCD). The Plackett-Burman design was first used to screen the factors influencing simultaneous hydrogen and ethanol production, i.e., initial pH, temperature, amount of vitamin solution, yeast extract (YE) concentration and glycerol concentration. Results indicated that initial pH, temperature, YE concentration, and glycerol concentration had a statistically significant effect (p ≤ 0.05) on hydrogen production rate (HPR) and ethanol production. The significant factors were further optimized using CCD. Optimum conditions for simultaneously maximizing HPR and ethanol production were YE concentration of 1.00 g/L, glycerol concentration of 37 g/L, initial pH of 8.14, and temperature of 37 °C in which a maximum HPR and ethanol production of 0.24 mmol H₂/L h and 120 mmol/L were achieved.     

Fermentative hydrogen yields from different sugars by batch cultures of metabolically engineered Escherichia coli DJT135

Future sustainable production of biofuels will depend upon the ability to use complex substrates present in biomass if the use of simple sugars derived from food crops is to be avoided. Therefore, organisms capable of using a variety of fermentable carbon sources must be found or developed for processes that could produce hydrogen via fermentation. Here we have examined the ability of a metabolically engineered strain of Escherichia coli, DJT135, to produce hydrogen from glucose as well as various other carbon sources, including pentoses. The effects of pH, temperature and carbon source were investigated in batch experiments. Maximal hydrogen production from glucose was obtained at an initial pH of 6.5 and temperature of 35 °C. Kinetic growth studies showed that the μmax was 0.0495 h⁻¹ with a Ks of 0.0274 g L⁻¹ when glucose was the sole carbon source in M9 (1X) minimal medium. Among the many sugar and sugar derivatives tested, hydrogen yields were highest with fructose, sorbitol and d-glucose; 1.27, 1.46 and 1.51 mol H₂ mol⁻¹ substrate respectively.     

Effect of temperature on fermentative hydrogen production by mixed cultures

Effect of temperatures ranging from 20 °C to 55 °C on fermentative hydrogen production by mixed cultures was investigated in batch tests. The experimental results showed that, at initial pH 7.0, during the fermentative hydrogen production using glucose as substrate, the substrate degradation efficiency and hydrogen production potential increased with increasing temperatures from 20 °C to 40 °C. The maximal substrate degradation efficiency was 98.1%, the maximal hydrogen production potential was 269.9 mL, the maximal hydrogen yield was 275.1 mL/g glucose and the shortest lag time was 7.0 h. The temperature for fermentative hydrogen production by mixed cultures was optimized to be 40 °C. The expanded Ratkowsky models could be used to describe the effect of temperatures on the hydrogen production potential, maximum hydrogen production rate and the lag time during fermentative hydrogen production.     

Optimization of hydrogen production by hyperthermophilic eubacteria, Thermotoga maritima and Thermotoga neapolitana in batch fermentation

The batch fermentations of two hyperthermophilic eubacteria Thermotoga maritima strain DSM 3109 and Thermotoga neapolitana strain DSM 4359 were carried out to optimize the hydrogen production. The simple and economical culture medium using cheap salts with strong buffering capacity was designed based on T. maritima basal medium (TMB). Both strains cultivated under strictly anaerobic conditions showed the best growth at temperature of 75–80 °C and pH of 6.5–7.0. The maximum cell growth of 3.14 g DCW/L and hydrogen production of 342 mL H₂ gas/L were obtained, respectively, in the modified TB medium containing 7.5 g/L of glucose and 4 g/L of yeast extract. Hydrogen accumulation in the headspace was more than 30% of the gaseous phase. Cells were also cultivated in cellulose-containing medium to test the feasibility of hydrogen production.     

Two-stage thermophilic bio-hydrogen and methane production from lime-pretreated oil palm trunk by simultaneous saccharification and fermentation

A simultaneous saccharification and fermentation (SSF) process was applied for thermophilic bio-hydrogen production from lime-pretreated oil palm trunk (OPT) by Thermoanaerobacterium thermosaccharolyticum KKU19. The SSF hydrogen fermentation conditions were optimized to maximize hydrogen yield (HY). Based on Plackett-Burman design, substrate loading and initial pH had significant effects on HY. The substrate loading and initial pH were further optimized using response surface methodology with a central composite design. The optimum conditions were a substrate loading, enzyme loading, inoculum concentration, initial pH and temperature of 4.6%, 10 filter paper unit (FPU)/g-OPT, 10% (v/v), 6.3 and 50 °C, respectively, which yielded the highest HY of 60.22 mL H₂/g-OPT. Structural analysis showed that lime pretreatment and SSF decreased the crystallinity of OPT. Methane production was carried out following the hydrogen production to improve the energy yield from OPT. The results showed that methane production increased total energy yield from 0.65 to 11.79 kJ/g-OPT under the optimal conditions.     

Fermentative production of hydrogen and soluble metabolites from crude glycerol of biodiesel plant by the newly isolated thermotolerant Klebsiella pneumoniae TR17

A thermotolerant fermentative hydrogen-producing strain was isolated from crude glycerol contaminated soil and identified as Klebsiella pneumoniae on the basis of the 16S rRNA gene analysis as well as physiological and biochemical characteristics. The selected strain, designated as K. pneumoniae TR17, gave good hydrogen production from crude glycerol. Culture conditions influencing the hydrogen production were investigated. The strain produced hydrogen within a wide range of temperature (30–50 °C), initial pH (4.0–9.0) and crude glycerol concentration (20–100 g/L) with yeast extract as a favorable nitrogen source. In batch cultivation, the optimal conditions for hydrogen production were: cultivation temperature at 40 °C, initial pH at 8.0, 20 g/L crude glycerol and 2 g/L yeast extract. This resulted in the maximum cumulative hydrogen production of 27.7 mmol H₂/L and hydrogen yield of 0.25 mol H₂/mol glycerol. In addition, the main soluble metabolites were 1,3-propanediol, 2,3-butanediol and ethanol corresponding to the production of 3.52, 2.06 and 3.95 g/L, respectively.     

Enzymatic saccharification and fermentation of paper and pulp industry effluent for biohydrogen production

Paper and pulp industry effluent was enzymatically hydrolysed using crude cellulase enzyme (0.8–2.2FPU/ml) obtained from Trichoderma reesei and from the hydrolysate biohydrogen was produced using Enterobacter aerogenes. The influence of temperature and incubation time on enzyme production was studied. The optimum temperature for the growth of T. reesei was found to be around 29 °C. The enzyme activity of 2.5 FPU/ml was found to produce about 22 g/l of total sugars consisting mainly of glucose, xylose and arabinose. Relevant kinetic parameters with respect to sugars production were estimated using two fraction model. The enzymatic hydrolysate was used for the biohydrogen production using E. aerogenes. The growth data obtained for E. aerogenes were fitted well with Monod and Logistic equations. The maximum hydrogen yield of 2.03 mol H₂/mol sugar and specific hydrogen production rate of 225 mmol of H₂/g cell/h were obtained with an initial concentration of 22 g/l of total sugars. The colour and COD of effluent was also decreased significantly during the production of hydrogen. The results showed that the paper and pulp industry effluent can be used as a substrate for biohydrogen production.     

Biohydrogen production from wastewater by Clostridium beijerinckii: Effect of pH and substrate concentration

An investigation of biological hydrogen production from glucose by Clostridium beijerinckii was conducted in a synthetic wastewater solution. A study examining the effect of initial pH (range 5.7–6.5) and substrate loading (range 1–3 g COD/L) on the specific conversion and hydrogen production rate has shown interaction behaviour between the two independent variables. Highest conversion of 10.3 mL H₂/(g COD/L) was achieved at pH of 6.1 and glucose concentration of 3 g COD/L, whereas the highest production rate of 71 mL H₂/(h L) was measured at pH 6.3 and substrate loading of 2.5 g COD/L. In general, there appears to be a strong trend of increasing hydrogen production rate with an increase in both substrate concentration and pH. Butyrate (14–63%), formate (10–45%) and ethanol (16–40%) were the main soluble products with other volatile fatty acids and alcohols present in smaller quantities.     

Feasibility of biohydrogen production at low temperatures in unbuffered reactors

Feasibility of biohydrogen production by dark fermentation at two temperatures (22 °C and 37 °C) in unbuffered batch reactors was evaluated using heat-treated compost as inocula and sucrose as substrate, without any initial pH adjustment or inorganic nutrient supplements. Gas production was quantified by two different pressure release methods – intermittent pressure release (IPR) and continuous pressure release (CPR). Hydrogen production (47.2 mL/g COD/L) and sucrose-to-hydrogen conversion efficiency (53%) were both found to be highest at the lower temperature and IPR conditions. Hydrogen production was higher at the lower temperature irrespective of the pressure release condition. The high yield of 4.3 mol of hydrogen/mole of sucrose obtained in this study under IPR conditions at 22 °C is equivalent to or better than the literature values reported for buffered reactors. Even though literature reports have implied potential inhibition of hydrogen production at high hydrogen partial pressures resulting from IPR conditions, our results did not show any negative effects at hydrogen partial pressures exceeding 5.0 × 10⁴ Pa. While our findings are contrary to literature reports, they make a strong case for cost-effective hydrogen production by dark fermentation.