Synthesis, Characterization and Optimum Reaction Conditions of Oligo-N, N′-bis (2-hydroxy-1-naphthalidene) Thiosemicarbazone

The oxidative polycondenzation reaction conditions of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (HNTSC) using air oxygen, H₂O₂ and NaOCl were studied in an aqueous alkaline medium between 50–90°C. Oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. Solubility testing of oligomer was investigated using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene acetonitrile, ethyl acetate, concentrated H₂SO₄ and an aqueous alkaline solution. Using NaOCl, H₂O₂ and air O₂ oxidants, conversion to oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (OHNTSC) of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was found to be 85, 80 and 76%, respectively, in an aqueous alkaline medium. According to the SEC analyses, the number-average molecular weight, weight-average molecular weight and polydispersity index values of OHNTSC synthesized were found to be 1050 gmol^–1 1715 gmol^–1 and 1.63, using NaOCl, and 2137, 2957 gmol^–1 and 1.38, using air O₂ and 2155 gmol^–1 4164 gmol^–1 and 1.93, using air H₂O₂, respectively. Also, TG analysis was shown to be unstable of oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone against thermo-oxidative decomposition. The weight loss of OHNTSC was found to be 97.29% at 900°C.     

Heterogeneous asymmetric reactions. 23. Enantioselective hydrogenation of ethyl pyruvate over cinchonine- and α-isocinchonine-modified platinum catalysts

The enantioselective hydrogenation of ethyl pyruvate to (S)-ethyl lactate over cinchonine- and -isocinchonine-modified Pt/Al₂O₃ catalysts was studied as a function of modifier concentration and reaction temperature. The maximum enantioselectivities obtained under the applied mild conditions were 89% ee using cinchonine (0.014 mmoldm^–3, 1 bar H₂, 23°C, 6% AcOH in toluene), and 76% ee in the case of -isocinchonine (0.14 mmoldm^–3, 1 bar H₂, –10°C, 6% AcOH in toluene). Since -isocinchonine of rigid structure exists only in anti-open conformation these data provide additional experimental evidence to support the former suggestion concerning the dominating role of anti-open conformation in these cinchona-modified enantioselective hydrogenations.     

Molybdenum nitride for the direct decomposition of NO

The physico-chemical properties of passivated -Mo₂N have been investigated. The material showed high activities for NO direct decomposition: nearly 100% NO conversion and 95% N₂ selectivity were achieved at 450C. The amount of O₂ taken up by -Mo₂N increased with temperature rise and reached 3133.9 molg^–1 at 450C; we conclude that there formation of Mo₂O_xN_y occurred. This oxygen-saturated -Mo₂N material was catalytically active: NO conversion and N₂ selectivity were 89 and 92% at 450C. We found that by means of H₂ reduction at 450C, Mo₂O_xN_y could be reduced back to -Mo₂N and the oxidation/reduction cycle is repeatable; such a behaviour and the high oxygen capacity (3133.9 molg^–1) of -Mo₂N suggest that -Mo₂N is a promising catalytic material for automobile exhaust purification.     

The Preferential Oxidation of CO: Selective Combinatorial Activity and Infrared Studies

From EXAFS (extended X-ray absorption fine structure) analysis, gold was found to have mainly oxygen in its nearest coordination shell in the fresh Au/-Al₂O₃ catalyst prepared by AuCl₃ impregnation and vacuum drying at room temperature. After thermal treatment under helium, chlorine appeared within the nearest neighbors of gold and more chlorine showed up as the treatment temperature was increased from 323 to 473K. No reduced Au species was observed up to 473K under He. However, the gold became reduced during CO oxidation at 373K and above. The precursor AuCl₃ was found to deposit on -Al₂O₃ via bonding to surface hydroxyl groups. This catalyst showed nearly 100% CO conversion at 573K, but a very low activity at 373 K under the conditions used in this study. Neither the residual chlorine nor the extent of reduction can explain the low activity at lower temperatures.     

Origin of rate bistability in Mn–O/Al2O3 catalysts for carbon monoxide oxidation: role of the Jahn–Teller effect

Peculiarities in catalytic activity in carbon monoxide oxidation as well as some structure, electronic and magnetic properties of the three oxide catalysts, Mn³⁺–O/Al₂O₃ (1), Mn³⁺–O–Fe/Al₂O₃ (Mn-substituted spinel, 2) and -Fe₂O₃/Al₂O₃ (3), were studied by kinetic measurements and by Mössbauer spectroscopy. The catalysts 1 and 2 showed a kinetic bistability with a sharp transition towards more reactive state at 200°C (ignition point). In contrast, for catalyst 3, at 200–250°C, the behavior of reaction rate against temperature did not display noticeable hysteresis. On cooling the catalysts 1 and 2, extinction was observed at about 170 and 120°C, respectively, i.e., at 30–80°C lower than the corresponding ignition points. Proximity of activation energy for the high and low activity (15–19 kJ/mol) for both Mn-containing catalysts suggests an increase in the number of active sites at high temperature with no changes in the reaction mechanism. The considerable difference between Mn-containing catalysts 1, 2 and Fe-containing catalyst 3 may be caused by Jahn–Teller (JT) type distortions of the oxygen polyhedron around Mn³⁺. A significant spontaneous axial bond stretching within the local polyhedron seems to diminish Mn–O binding energy, facilitate the participation of surface oxygen species, O_S, in the oxidation of CO by a redox mechanism and promote oxygen vacancies at the surface that would cause considerable effect on the activity. An increase in the width of the counterclockwise hysteresis loop for the catalyst 2 compared to the catalyst 1 indicates that clusters of mixed spinel provide more active sites and more labile O_S species than clusters of the binary Mn oxide.     

Phase transitions and dimensional and morphological changes in an “Aluminum Hydroxide-Alumina” system under a shock-wave action

A method is proposed to study the sequence of phase transitions in powdered materials under a shock-wave action. It is shown that the aluminum hydroxide-alumina system has the following sequence of phase transformations under a shock-wave action: bayerite boehmite -Al₂O₃ -Al₂O₃. It is found that there are no transitional high-temperature modifications of alumina. A method is developed for obtaining a submicron alumina powder, which allows obtaining materials with a controlled phase composition, including a thermodynamically stable -modification of Al₂O₃. The specific features of the morphological structure and the phase and structural characteristics of powders after a shock-wave action are considered.Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 1, pp. 110–119, January–February, 2005.     

Continuous oxidation of benzyl alcohol in “supercritical” carbon dioxide

Supercritical (dense) carbon dioxide has been applied as solvent for the partial oxidation of benzyl alcohol with molecular oxygen in a fixed-bed reactor. High rate and good selectivity to benzaldehyde (93–97%) has been achieved with 0.5 wt% Pd/alumina or 0.5 wt% Pd/C, at around 100C and 100 bar, using only moderate excess of oxygen. The by-product benzoic acid has an autocatalytic effect on the hydration of benzaldehyde, and the subsequent oxidative dehydrogenation leads to benzoic acid, and benzyl benzoate by esterification. Promotion of Pd by Pb improves the selectivity. No catalyst deactivation or metal leaching has been observed. The method provides reasonable yields at much lower temperature than that applied in conventional gas phase oxidation, showing a potential for the synthesis of thermolabile, water-insoluble aromatic aldehydes.     

Partial oxidation of methane to synthesis gas

Partial oxidation of methane to synthesis gas has been carried out over a number of transition metal catalysts under a range of conditions. It is found that the metals Ni, Ru, Rh, Pd, Ir and Pt, either supported on alumina or present in mixed metal oxide precursors, will bring the system to equilibrium. The yield of CO and H2 improves with increasing temperature in the range 650–1050 K, and decreases with increasing pressure between 1 and 20 atm. An excellent yield (92%) is obtained with a 421 N₂CH₄O₂ ratio at 1050 K and atmospheric pressure, with a space velocity of 4×10⁴ hour^–1.     

High‐activity catalyst of SO 4 2− /ZrO2 supported on γ‐Al2O3 for n‐butane isomerization

A series of Al₂O₃supported SO ₄ ^2– /ZrO₂ superacid catalysts (named SZ/Al₂O₃) were prepared by a precipitation method and their catalytic behavior for nbutane isomerization at low temperature in the absence of H₂ and at high temperature in the presence of H₂ was studied in this paper. The catalytic activities of some of these catalysts were enhanced significantly at both low and high temperatures. At 250°C after 6 h on stream, the steady activity of the most active sample, 60%SZ/Al₂O₃, is about two times higher than that of conventional SZ. The texture properties of catalysts were studied by the methods of XRD and the adsorption of N₂. Experimental evidence of IR of adsorbed pyridine indicates that the significant activity enhancements of SZ/Al₂O₃ catalysts are caused by the increasing of the amount of strong acid sites.     

Mechanisms of Iron Activation on Fe-Containing Zeolites and the Charge of α-Oxygen

According to previous Mössbauer data [1] -sites formation at the activation of Fe-containing zeolites is accompanied by irreversible self-reduction of the iron, proceeding without participation of an external reducing agent. Reduced Fe²⁺ ions are inert to O₂ but are reversibly oxidized to Fe³⁺ by N₂O, generating the -oxygen species, O, which provide selective oxidation of hydrocarbons.In this work, the mechanism of -sites formation was studied via quantitative measurement of the dioxygen amount desorbed into the gas phase at the step of self-reduction. A prominent role of the zeolite matrix chemical composition has been revealed. For example, with zeolites of Al–Si composition (FeZSM-5 and Fe-), heating to 900 °C in a closed vacuum space leads to irreversible evolution of O₂, which is accompanied by the immediate formation of -sites. Similar heating of B–Si and Ti–Si zeolites also leads to dioxygen evolution; however, this evolution is reversible and is not accompanied by formation of -sites. Activation of these zeolites occurs only in the presence of water vapor. Stoichiometric measurements showed that in terms of charge one regular O^2- ion, removed at the activation, is equivalent to two -oxygen atoms. So, -oxygen is identified as an ion-radical species O ^-., whose unique oxidation properties still distinguish it from the generally observed O^-. radicals.The mechanism of -sites formation is proposed, in which the process of strong chemical stabilization of reduced Fe²⁺ atoms in the zeolite structure is a key step, making impossible the reoxidation of the iron with O₂.     

Transport of phosphorus forms and of nitrate through a clay soil under grass and cereal production

Many nutrients are lost from soil to water viatile drains. However, there are very few reliable studies of such phosphorus(P)losses under Swedish agriculture practices, especially in connection tofertiliser and slurry applications and related to nutrient balances. Tile drainlosses were measured from nine experimental plots in south-west Sweden; fourplots were measured for 7 years and five plots for 2–3 years. Cereals,mainly spring barley (Hordeum vulgare, L.) and oats(Avena sativa, L.), were grown in six plots, while oneplotwas cultivated with grass, timothy (Phleum pratense L.)andmeadow fescue (Festuca pratensis, L.), one with lucerne(Medicago sativa, L.) and meadow fescue (F.pratensis, L.), and the last one was a set-aside withgrass (Lolium perenne, L. and Trifoliumrepens, L.) that was neither fertilised nor used for crop removal.Attention was paid to the forms in which P was transported to water since thishas important ecological implications. Average losses of particulate P (PP)fromthe set-aside land was significantly lower than from the cerealproduction, but the average losses of soluble reactive P (SRP) and dissolvednonreactive P (DUP) were the same. Average loss of PP from the grass ley during 3years (0.09 kg per ha^–1 y^–1) wassignificantly less than the losses from cereal production. Total P loss of 0.3kg per ha^–1 y^–1 was equal to the averagelossfrom the Swedish monitoring network of observation fields. Compared to theaverage nitrate-nitrogen (NO₃-N) leaching, which was 7 kg perha^–1 y^–1 from cereals, the NO₃-Nleaching was very low from the plots with lucerne-grass and set-aside.After applying and directly ploughing in 80 kg ha^–1 ofsuperphosphate for cereal production in November 1998, 0.6–1.8 kgSRP ha^–1 y^–1 was lost through the drain tiles.Surface application of cattle slurry in spring 1999 to the grass ley alsoresulted in a very pronounced increased base level of SRP. This paper documentsthe importance of applying slurry during dry conditions and of placingfertiliser into the soil according to crop requirements in the time perspectiveof one year.     

Kinetics and Mechanism of Copolymerization of α-terpineol with Methylmethacrylate in Presence of Azobisisobutyronitrile as an Initiator

The radical copolymerization of -terpineol with methyl-methacrylate in xylene at 80±0.1C for 50 minutes in the presence of azobisisobutyronitrile (AIBN) follows ideal kinetics and results in the formation of a functional and random copolymer. The activation energy is 33 KJ/mole. The IR spectrum and NMR spectra of the copolymer(s) shows the bands at 1750 and 3400 cm^–1 for ester group of methylmethacrylate and alcoholic group of -terpineol and peaks at 3 to 4 for methoxy group and at 6.5 to 7.5 due to alcoholic group of methylmethacrylate and -terpineol repectively. The values of reactivity ratios, calculated by Kelen–Tüdos method, are r ₁ (MMA) = 0.18 and r ₂ (-terpineol) = 0.046. The Alfrey-Price; Q–e parameters for -terpineol has been calculated as 0.149 and 2.486. The mechanism of copolymerization has been elucidated and it is concluded that the double bond present in the monocyclic ring of -terpineol is an active site for copolymerization and the alcoholic group of -terpineol remain to give functional copolymer.     

Possibility of Initiation of Combustion of CH4–O2 (Air) Mixtures with Laser‐Induced Excitation of O2 Molecules

The possibility of initiation of combustion of CH₄–O₂ mixtures with excitation of O₂ molecules to the states a¹_g and b¹⁺ _g by laser radiation with wavelengths of 1.268 m and 762 nm is considered. It is shown that excitation of O₂ molecules significantly decreases the induction period and ignition temperature because of accelerated formation of active atoms and radicals and intensification of the chain mechanism of the process. Even if the specific energy of laser radiation absorbed by the gas is low ( 0.1 eV per molecule), the ignition temperature of the CH₄–O₂ mixture with a ratio of 1:2 can be reduced from 1000 to 300 K.     

Lean NOx catalysis over alumina‐supported catalysts

aluminasupported catalysts show promise as lean NO_x catalysts. The role of alumina in influencing the structural and chemical properties of the active phase supported on it is discussed using some effective aluminabased lean NO_x catalysts. These include Ag/Al₂O₃, CoO_x/Al₂O₃ and SnO₂/Al₂O₃. Alumina plays an important role in stabilizing Ag in the oxidic phase and cobalt in the 2+ oxidation state. For SnO₂/Al₂O₃, alumina increases the SnO₂ surface area. On both Ag/Al₂O₃ and SnO₂/Al₂O₃, alumina also participates actively in the NO_x reduction reaction. An active organic intermediate is formed on Ag or Sn oxide which reacts with NO_x subsequently on alumina to form N₂.     

Synthesis and Properties of Soluble 3,3′,4,4′-Benzophenonetetracarboxylic Dianhydride Copolyimides Based on 1,1-Bis[4-(4-aminophenoxy)phenyl]-1-phenylethane and Commercial Dianhydrides

1,1-Bis[4-(4-aminophenoxy)phenyl]-1-phenylethane (BAPPE) is a useful monomer for preparing soluble polyimides, but polyimide synthesized from BAPPE and 3,3,4,4-benzophenonetetracarboxylic dianhydride (BTDA) shows poor solubility. Insoluble BTDA/BAPPE polyimide can copolymerize with soluble polyimides at certain molar ratios (m₂/m₁) to produce arbitrarily soluble copolyimides. To prepare soluble copolyimides, the smallest m₂/m₁ ratio changes due to the matching dianhydrides, depending on the structure of the dianhydride component. When polymers contain the same m₂/m₁ ratio, copolyimides formed through thermal imidization show poorer solubility than these formed through chemical imidization, and copolyimide cyclized at 250°C has a better solubility than that cyclized at 300°C; this is due to the formation of intermolecular linkages during the high-temperature thermal cyclization. Additional, these copolyimides are characterized by good mechanical properties together with good thermal stability, and a comparative study on the properties of the homopolyimide and copolyimide are also presented.     

Additional male mediterranean fruitfly (Ceratitis capitata wied.) Attractants from Angelica seed oil (Angelica archangelica L.)

Two sesquiterpene hydrocarbons, -copaene and -ylangene, were isolated from bioactive fractions of angelica seed oil and were shown by field bioassays to be attractive to the male Mediterranean fruit fly. Their relative attractiveness, compared with the(+)-and (–)--copaene enantiomers, are: (+)--copaene>angelica -copaene>angelica -ylangene>(–)--copaene. The enantiomer ratios for the two compounds are: -copaene, 61.4% (+), 38.6% (–); -ylangene, 91.9% (+), 8.1% (–).trans--Bergamotene was also isolated from the same fractions, but in sufficient quantity for bioassay [enantiomer ratio: 95.7% (+), 4.3% (–)].     

Electrosynthesis of 4,4′-dinitroazobenzene on PbO2 electrodes

Parameters which affect the electrosynthesis of 4,4-dinitroazobenzene from p-nitroaniline on platinum and PbO₂ electrodes were investigated and optimum conditions were determined. Maximum conversion efficiency for electrosynthesis was 95% with a pure -PbO₂ electrode. It was found that the electrocatalytic activity of a PbO₂ electrode depends upon its / ratio and its degree of crystallinity. The effects of the added base and water on the conversion efficiency were also elucidated.     

Synthesis and Redox Properties of a π-Conjugated Cyclobutadienecobalt Polymer Containing Ferrocenyl Groups

The reaction of CpCo(PPh₃)₂, in which Cp= ⁵-cyclopentadienyl, with a -conjugated diacetylene, FcCC–o-C₆H₄–CCFc, in which Fc=ferrocenyl, was found to give a cyclobutadienecobalt mononuclear complex, { ⁴-C₄Fc₂(o-FcC₆H₄)₂}CoCp (1), the crystal structure of which was determined by X-ray crystallography. In contrast, the reaction of CpCo(PPh₃)₂ with FcCC–p-C₆H₄–CCFc affords a cyclobutadienecobalt polymer, [p-C₆H₄( ⁴-C₄Fc₂)CoCp] _n (2). The monocobalt complex 1 shows reversible 1e^– and 3e^– redox waves at E ⁰=0.116 and 0.350 V vs Ag/Ag⁺, and the polymer complex 2 shows two chemically reversible redox waves at E ⁰=0.143 and 0.219 V for the oxidation of the ferrocenyl moieties in the cyclic voltammogram. Crystal data are as follows: (1, C₆₅H₄₉CoFe₄), triclinic, space group P\={1} (No. 2), a=13.547(4), b=16.197(4), c=11.763(4) Å, =106.79(2), =97.93(3), =97.12(3), V=2410(1) ų, Z=2.     

Epoxidation of Allylic Alcohols with TiO2–SiO2: Hydroxy-Assisted Mechanism and Dynamic Structural Changes During Reaction

Epoxidation of allylic alcohols and cyclohexene with TBHP and titania–silica aerogels containing 1 and 5wt% TiO₂ has been studied. For the oxidation of geraniol and cyclohexenol, the regio- and diastereoselectivities and kinetic data indicate an OH-assisted mechanism involving a dative bond between the OH group and the Ti site. This mechanism is disabled in the oxidation of cyclooctenol due to steric hindrance. The moderate regio- and diastereoselectivities of the aerogels, compared with those of TS-1 and the homogeneous model Ti(OSiMe₃)₄, are attributed to the presence of non-isolated Ti sites and to a silanol-assisted mechanism, according to which model the allylic alcohol is anchored to a neighboring SiOH group instead of the Ti-peroxo complex. Kinetic analysis of the initial transient period revealed rapid catalyst restructuring during the first few turnovers. A feasible explanation is the breaking of Si–O–Ti linkages of the carefully predried aerogels by water or TBHP, resulting in active Ti sites with remarkably different catalytic properties.     

Cobalt‐catalyzed amination of 1,3‐cyclohexanediol and 2,4‐pentanediol in supercritical ammonia

The onestep procedure of amination of bifunctional secondary alcohols to diamines has been investigated in a continuous fixedbed reactor. Application of supercritical NH₃ as a solvent and reactant suppressed catalyst deactivation and improved selectivities to amino alcohol intermediates, whereas selectivities to diamines remained poor (8–10%). The main reason for the low diamine selectivity of 1,3dihydroxy compounds is water elimination leading to undesired monofunctional products via ,unsaturated alcohol, ketone or amine intermediates. This side reaction does not occur with 1,4dihydroxy compounds which afford high aminol and diamine selectivities under similar conditions. Amination of secondary diols with ammonia was found to be faster, but less selective than that of the corresponding primary 1,3propanediol.