Shape‐memory behavior of high‐strength amorphous thermoplastic poly(para‐phenylene)

The purpose of this study was to investigate the shape‐memory behavior of poly(para‐phenylene) (PPP) under varying programming temperatures, relaxation times, and recovery conditions. PPP is an inherently stiff and strong aromatic thermoplastic, not previously investigated for use as a shape‐memory material. Initial characterization of PPP focused on the storage and relaxation moduli for PPP at various frequencies and temperatures, which were used to develop continuous master curves for PPP using time–temperature superposition (TTS). Shape‐memory testing involved programming PPP samples to 50% tensile strain at temperatures ranging from 155°C to 205°C, with varying relaxation holds times before cooling and storage. Shape‐recovery behavior ranged from nearly complete deformation recovery to poor recovery, depending heavily on the thermal and temporal conditions during programming. Straining for extended relaxation times and elevated temperatures significantly decreased the recoverable deformation in PPP during shape‐memory recovery. However, PPP was shown to have nearly identical full recovery profiles when programmed with decreased and equivalent relaxation times, illustrating the application of TTS in programming of the shape‐memory effect in PPP. The decreased shape recovery at extended relaxation times was attributed to time‐dependent visco‐plastic effects in the polymer becoming significant at longer time‐scales associated with the melt/flow regime of the master curve. Under constrained‐recovery, recoverable deformation in PPP was observed to have an exponentially decreasing relationship to the bias stress. This study demonstrated the effective use of PPP as a shape‐memory polymer (SMP) both in mechanical behavior as well as in application. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42903.     

Shape‐memory polyurethanes minimally crosslinked with hydroxyl‐terminated AB2‐type hyperbranched polyurethanes

A series of shape‐memory polyurethanes based on poly(ϵ‐caprolactone) diol were prepared with novel hydroxyl‐terminated hyperbranched polyurethanes as crosslinkers and were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, wide‐angle X‐ray diffraction, dynamic mechanical analysis, tensile testing, and shape‐memory testing. The molecular weight of the soluble polymers ranged from 5.1 × 10⁴ to 29.0 × 10⁴ g/mol. The differential scanning calorimetry and wide‐angle X‐ray diffraction data indicated that when the crystallinities of the crosslinked polymers were compared to that of linear polyurethane, this parameter was improved when the crosslinker was in low quantity. The storage modulus ratios obtained from the dynamic mechanical analyses data of the crosslinked polymers were also high compared to that of the linear polyurethane. As a result, crosslinked polymers showed better shape‐memory properties compared to the linear polyurethanes. Also, the that incorporation of the hyperbranched polymer as a crosslinker into the polyurethane chain improved the thermal and mechanical properties of the polymer. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Blends of triazine‐based hyperbranched polyether with LDPE and plasticized PVC

Triazine‐based hyperbranched polyether was obtained by earlier reported method and blended with low density polyethylene (LDPE) and plasticized poly(vinyl chloride) (PVC) separately to improve some desirable properties of those linear polymers. The properties like processability, mechanical properties, flammability, etc. of those linear polymers were studied by blending with 1–7.5 phr of hyperbranched polyether. The mechanical properties were also measured after thermal aging and leaching in different chemical media. SEM study indicates that both polymers exhibit homogenous morphology at all dose levels. The mechanical properties like tensile strength, elongation at break, hardness, etc. of LDPE and PVC increase with the increase of dose level of hyperbranched polyether. The flame retardant behavior as measured by limiting oxygen index (LOI) for all blends indicates an enhanced LOI value compared to the polymer without hyperbranched polyether. The processing behavior of both types of blends as measured by solution viscosity and melt flow rate value indicates that hyperbranched polyether acts as a process aid for those base polymers. The effect of leaching and heat aging of these linear polymers on the mechanical properties showed that hyperbranched polyether is a superior antidegradant compared to the commercially used N‐isopropyl‐N‐phenyl p‐phenylene diamine. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 648–654, 2007     

Effect of the crosslinking density and programming temperature on the shape fixity and shape recovery in epoxy–anhydride shape‐memory polymers

In addition to the fabrication of thermoset epoxy–anhydride shape‐memory polymers (SMPs), a systematic experimental investigation was conducted to characterize the crosslinking density, micromorphology, thermal properties, mechanical properties, and shape‐memory effects in the epoxy SMP system, with a focus on the influence of the crosslinking density and programming temperature on the shape‐fixity and shape‐recovery behaviors of the polymers. On the basis of the crosslinking density information determined by NMR technology, we concluded that the effect of the crosslinking density on the shape‐fixity behaviors was dependent on the programming temperature. The advantage of a nice combination of crosslinking density and programming temperature provided an effective approach to tailor the actual shape recovery within a wide range. The increasing crosslinking density significantly improved the shape‐recovery ratio, which could be further improved through a decrease in the programming, whereas the crosslinking density was more fundamental. This exploration should play an important role in the fabrication and applications of SMP materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40559.     

Thermomechanical characterization of thermoplastic polyimides containing 4,4'‐methylenebis(2,6‐dimethylaniline) and polyetherdiamines

In this work, we synthesized polyimides by incorporating an aromatic diamine monomer with a methylene linker, 4,4'‐methylenebis(2,6‐dimethylaniline) (MBDMA), to make a robust main chain along with aliphatic polyetherdiamine backbone linkers to reduce rigidity. We designed the polymers to exhibit thermal properties in between those of conventional aromatic polyimides and polymers with wholly aliphatic ether diamine links. Through dynamic mechanical analysis and differential scanning calorimetry, it is shown that control of the molar ratios of the aromatic MBDMA (4,4'‐methylenebis(2,6‐dimethylaniline)) and the composition and size of the aliphatic polyetherdiamine can be used to tune the glass transition. The polymers were characterized by GPC, FTIR, NMR, thermomechanical and calorimetric analysis, and microhardness testing. POLYM. ENG. SCI., 59:221–232, 2019. © 2018 Society of Plastics Engineers     

Characterization of the thermoresponsive shape‐memory effect in poly(ether ether ketone) (PEEK)

We conducted a systematic experimental investigation to characterize the shape‐memory effect in a commercial poly(ether ether ketone) (PEEK), which is a very important high‐temperature polymers at present. The focus was on the influence of the programming conditions and heating temperature for recovery on the shape‐recovery ratio (R_r). We concluded that PEEK is not only an important engineering polymer as it is traditionally known but is also an excellent high‐temperature shape‐memory polymer. For a residual programming strain of 30%, the maximum R_r was about 90%. It was revealed that it was practically feasible to program PEEK at room temperature and to lower the recovery temperature from its melting temperature range to around its glass‐transition temperature. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39844.     

Triple‐shape memory properties of polyurethane/polylactide–polytetramethylene ether blends

A facile method to prepare triple‐shape memory polymers was developed by blending polyurethane and polylactide–polytetramethylene with well‐separated glass transition temperatures. The thermal properties of the blends were characterized using modulated differential scanning calorimetry and differential scanning calorimetry. Field emission scanning electron microscopy, Fourier transform infrared spectroscopy and wide‐angle X‐ray diffraction were used to characterize the microstructures and crystal structures of the blends. The mechanical properties were also evaluated. The versatile triple‐shape memory effect and quantitative shape memory response were evaluated by consecutive thermal mechanical experiments based on a two‐step programming process and subsequent progressive thermal recovery. The results show that the blends have phase‐separated microstructures resulting in an ability to fix two temporary shapes independently and can recover to their original shapes sequentially. The blends have excellent triple‐shape memory properties and may have some applications in multi‐shape coatings, adhesives, films and temperature sensing or actuating elements. © 2015 Society of Chemical Industry     

Shape‐memory effects of radiation crosslinked poly(ϵ‐caprolactone)

Poly(?‐caprolactone) (PCL) with different molecular weight were crosslinked by γ‐radiation. The radiation crosslinking features were analyzed by Soxhlet extraction with toluene and the Charlesby–Pinner equation. The crosslinking degree is relative to molecular weight and radiation dose; the relation between sol fraction and dose follows the Charlesby–Pinner equation. All the samples were crystalline at room temperature, and the radiation crosslinking had a little effect on the crystallinity and the melting behavior of PCL. The shape‐memory results indicated that only those specimens that had a sufficiently high crosslinking degree (gel content is higher than about 10%) were able to show the typical shape‐memory effect, a large recoverable strain, and a high final recovery rate. The response temperature of the recovery effect (about 55°C) was related to the melting point of the samples. The PCL shape‐memory polymer was characterized by its low recovery temperature and large recovery deformation that resulted from the aliphatic polyester chain of PCL. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1589–1595, 2003     

Surface‐modified long‐chain branching hyperbranched polymer for postsurgical anti‐adhesion applications

Hyperbranched polyurethanes with various lengths of linear segments between two branching points were synthesized by an A2 + B3 polymerization approach, where A2 is an aliphatic diisocyanate and B3 is a triol with three poly(ethylene glycol)–polycaprolactone diblock chains. The influences of the A2/B3 monomer ratio and the segment length on the gel point and thermal properties of the polymers were investigated. Crystallization behavior of the hyperbranched polymers can be controlled by tuning the segment length between two branching points. Surface restructuring is observed after oxygen plasma treatment because of the temperature effect and preferential etching effect. The effects of oxygen plasma treatment on the surface morphology, surface energy, surface chemical properties and postsurgical anti‐adhesion properties of hyperbranched polymer films were studied .     

Effect of Glass Transition Temperature (Tg ) in Thermal and Mechanical Properties of UV-Cured Films

Polymers of urethane diacrylate containing an aliphatic or aromatic backbone chain were prepared in the presence of a number of monofunctional and polyfunctional monomers under UV curing. These monomers have different glass transition temperatures ranging from — 110° to 250°C. Film hardness, gel content, tensile properties, and shape recovery characters of these polymers were determined. A correlation between the glass transition temperatures and these properties was established. The monomer N-vinyl pyrrolidone demonstrated the best performance in the preparation of polymers. Some of these polymer films have achieved a unique character of shape recovery phenomenon.     

A Thermo‐ and Moisture‐Responsive Zwitterionic Shape Memory Polymer for Novel Self‐Healable Wound Dressing Applications

Developing wound dressings that have strong adhesion strength without causing any conglutination to the wound site is still challenging. Herein, is proposed that zwitterionic shape memory polymers can be applied as promising candidates for wound dressing. Sulfobetaine methacrylate (SBMA) is copolymerized with 2,3‐dihydroxypropyl methacrylate (DHMA) in the presence of boric acid as a cross‐linking agent. The prepared material exhibits multi‐stimuli responsive shape memory behaviors: it can rapidly return to its initial shape upon heating to 90 °C, and a gradual recovery is also observed by absorbing moisture in humid environments. The shape memory effect can be well adjusted via incorporation of sodium chloride to induce the dissociation of electrostatic interactions between PSBMA chains, leading to reduced transition temperature and faster shape recovery rate. Moreover, the dynamic nature of boron ester bonds and electrostatic interaction endows the material with effective and rapid self‐healing ability. It is also demonstrated that the deployment process of the dressing that a sample with an initially circular shape can perfectly fit and tightly bind to the wound site after moisture‐induced shape recovery. The proposed zwitterionic polymer can possibly extend the application scope of shape memory polymers and pave a new way for the design of wound dressings.     

Shape‐memory property and characterization of epoxy resin‐modified Mesua ferrea L. seed oil‐based hyperbranched polyurethane

Modification of existing polymers leads to enhancement of many desirable properties. So, a hyperbranched polyurethane (HBPU) of monoglyceride of Mesua ferrea L. seed oil, poly(ε‐caprolactone)diol (M_n = 3000 g mol^?1), 2,4‐toluene diisocyanate, and glycerol with 30% hard segment (NCO/OH = 0.96) has been modified with different amounts of bisphenol‐A based epoxy resin. The system is cured by poly(amido amine) hardener at 120°C for specified period of time. Improvement of thermostability, scratch hardness, and impact strength are observed by this modification of HBPU. The differential scanning calorimetry (DSC) results show improvement of melting temperature of the modified systems. The enhancement of tensile strength is about 2.4 times compared with that of the unmodified one. The morphology and structural changes due to variation of epoxy content was studied by scanning electron microscopy (SEM) analysis and Fourier transform infrared (FTIR) spectroscopy. The rheological properties of the epoxy‐modified HBPU show the dependence on the amount of epoxy resin. Shape memory study of the crosslinked HBPUs shows 90–98% thermoresponsive shape recovery. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Partially constrained recovery of (meth)acrylate shape‐memory polymer networks

The purpose of this study was to characterize the partial strain recovery of a thermoset shape‐memory polymer under a constraining stress. Three polymer networks were synthesized from tert‐butyl acrylate and poly(ethylene glycol) dimethacrylate (PEGDMA) solutions. The molecular weight and the weight fraction of the PEGDMA crosslinking monomer was altered systematically to maintain a constant glass transition temperature (T_g = 54°C) but tailorable rubbery moduli, which varied by almost an order of magnitude for the three polymer networks (E = 1.8–11.3°MPa). The shape‐recovery behavior of the polymers under a constraining stress was characterized for programming temperature below (20°C) and above (70°C) the T_g. The experiments revealed a peak in the recovered strain for samples programmed at 20°C. Recovered strain scaled linearly with the constraining stress by the rubbery modulus. The work performed by the shape‐memory polymer networks was observed to be primarily a function of constraining stress and crosslinking density, while programming temperature had a relatively mild influence; however, the efficiency of the shape‐memory effect was shown to be a function of constraining stress and programming temperature, but was independent of crosslinking density. Maximum work efficiencies (up to 45%) were observed for programming temperature of 70°C. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermomechanical properties and shape memory effect of epoxidized natural rubber crosslinked by 3‐amino‐1,2,4‐triazole

A thermally induced shape memory polymer based on epoxidized natural rubber (ENR) was produced by curing the ENR with 3‐amino‐1,2,4‐triazole as a crosslinker in the presence of bisphenol‐A as a catalyst. Dynamic mechanical and tensile analysis was conducted to examine the variation of glass transition temperature, stiffness, and extensibility of the vulcanizates with the amount of curatives. Shape memory properties of the ENR vulcanizates were characterized by shape retention and shape recovery. It was revealed that the glass transition temperature of the ENR vulcanizates could be tuned well above room temperature by increasing the amount of curing agents. Also, ENR vulcanizates with T_g higher than ambient temperature showed good shape memory effects under 100% elongation, and the response temperatures of the recovery were well matched with T_g of the samples. Copyright © 2006 Society of Chemical Industry     

Soybean oil‐based shape‐memory polyurethanes: Synthesis and characterization

Shape‐memory polymers (SMPs) have wide range of applications due to their ability to sense environmental stimuli and reshape from a temporary shape to a permanent shape. Plant oil‐based polymeric materials are highly concerned in recent years in consideration of petroleum depletion and environmental pollution. However, plant oil‐based polymers are rarely investigated regarding their shape‐memory characteristics though bio‐based SMPs are highly desired nowadays. In this study, a series of soybean oil‐based shape‐memory polyurethanes (SSMPUs) are prepared through a mild chemo‐enzymatic synthetic route, and their properties are fully characterized with tensile testing, DSC, dynamic mechanical analysis (DMA), and shape‐memory testing. Results show that SSMPUs are soft rubbers with tensile strength in the range of 1.9–2.2 MPa and glass transition temperature in the range of 2–5°C, and possess good shape recoveries at RT when stretching ratio is 10, 20, and 30%, respectively. This work would promote the development of high‐value‐added plant oil‐based shape‐memory polyurethanes. Practical applications: Using annual renewable plant oil as feedstock, the synthesized SSMPUs show good shape recovery properties, which will make them applicable as potential alternatives to petroleum‐based shape‐memory materials. The simple and mild preparation process also contributes to the further exploration of plant oil to value‐added functional materials.     

State diagram of phase transition temperatures and solvent‐induced recovery behavior of shape‐memory polymer

In this study we analyzed the phase and state transitions of shape‐memory polymers (SMPs)/solvent mixtures using the Flory–Huggins (FH) theory by extension of Vrentas and the Couchman–Karasz theory for glass transition, as well as Clausius–Clapeyron relation for melting transition. Using scaling relations of model parameters, we have obtained a theoretical prediction of state diagrams of the phase transition temperature and solvent‐induced recovery in SMPs. The inductive decrease in transition temperature is identified as the driving force for the solvent‐induced shape‐memory effect in SMPs Consequently, the thermodynamics of the polymer solution and the relaxation theory were employed to characterize the dependencies of shape recovery time on the FH parameter and the ratio of the molar volume of solute to solvent. With the estimated model parameters, we constructed the state diagram for SMP, which provides a powerful tool for design and analysis of phase transition temperatures and solvent‐induced recovery. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

New coating systems based on vinyl ether‐ and oxetane‐modified hyperbranched polyesters

A series of hyperbranched aliphatic‐aromatic polyesters has been synthesized which contain vinyl ether or oxetane functionalities as curable groups. We investigated the curing behavior of these multifunctional polymers in the presence of reactive diluents in order to analyze the possibility of their application in high solids coatings. The vinyl ether‐modified hyperbranched polyesters with a high degree of modification yield the best coatings. Furthermore, coating systems containing vinyl ether‐modified hyperbranched polyesters and triethyleneglycol divinyl ether (DVE‐3) as reactive diluent showed a better performance compared to those containing 4‐hydroxybutyl vinyl ether (HBVE). Real time FT‐IR studies revealed a high conversion of functional groups (76%) for the cationic curing with DVE‐3. On the other hand, the curing reaction of the functional hyperbranched polymers without the presence of any reactive diluent stopped at 32% conversion of functional groups due to the reduced mobility of the polymer. The vinyl ether‐modified hyperbranched polyester could be cured also radically in the presence of diethyl maleate (DEM) as reactive diluent, whereas the curing of the oxetane‐modified polyesters was very slow and incomplete in all attempts.     

Silicon‐containing anionic water‐borne polyurethane with covalently bonded reactive dye

A silicon‐containing water‐borne polyurethane (PU) polymer with hydroxyl side groups was synthesized that was stable in basic conditions and also capable of reacting with a reactive dye to form a covalently bonded dye molecule. The silicon‐containing anionic water‐borne PU prepolymer was synthesized from H₁₂‐4,4′‐diphenylmethane diisocyanate (H₁₂‐MDI), polytetramethylene glycol, polydimethylsiloxane (PDMS), 2,2′‐bis(hydroxymethyl), propionic acid (anionic centers), and triethyleneamine using the prepolymer mixing method. Water was then added to emulsify and disperse the resin to form an anionic water‐borne PU prepolymer. N‐(2‐Hydroxyethyl ethylene diamine) (HEDA) was used to extend the prepolymer to form a water‐borne PU polymer with a side chain of hydroxyl groups, which can further react with the reactive dye to form a dyed PU. The reactive dye of chlorosulfuric acid esters of sulfatoethyl sulfones can react with the water‐borne PU polymer. Behaviors of alkali resistance and dyeing properties were observed. In consideration of thermal properties, the dye‐grafted PU polymers exhibited lower glass‐transition temperatures for soft segments and hard segments than those without dye. Concerning mechanical properties, it was found that the modulus and the strength of the dyed PU polymers decreased with grafting of the dye molecule, but elongation at break was increased. The alkali resistance increased with PDMS content. For dye‐uptake properties, the percentage of dye grafting was over 90%. Also, the dye‐grafted PU exhibited a lower percentage of dye migration than that of polymers with ethylene diamine instead of HEDA as a chain extender, and showed greater colorfastness to light. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2045–2052, 2003     

Photopolymerized Thiol-Ene Systems as Shape Memory Polymers

In this study we introduce the use of thiol-ene photopolymers as shape memory polymer systems. The thiol-ene polymer networks are compared to a commonly utilized acrylic shape memory polymer and shown to have significantly improved properties for two different thiol-ene based polymer formulations. Using thermomechanical and mechanical analysis, we demonstrate that thiol-ene based shape memory polymer systems have comparable thermomechanical properties while also exhibiting a number of advantageous properties due to the thiol-ene polymerization mechanism which results in the formation of a homogeneous polymer network with low shrinkage stress and negligible oxygen inhibition. The resulting thiol-ene shape memory polymer systems are tough and flexible as compared to the acrylic counterparts. The polymers evaluated in this study were engineered to have a glass transition temperature between 30 and 40 °C, exhibited free strain recovery of greater than 96% and constrained stress recovery of 100%. The thiol-ene polymers exhibited excellent shape fixity and a rapid and distinct shape memory actuation response.     

Thermal,mechanical, and shape‐memory properties of nanorubber‐toughened,epoxy‐based shape‐memory nanocomposites

Epoxy‐based shape‐memory polymers (ESMPs) are a type of the most promising engineering smart polymers. However, their inherent brittleness limits their applications. Existing modification approaches are either based on complicated chemical reactions or done at the cost of the thermal properties of the ESMPs. In this study, a simple approach was used to fabricate ESMPs with the aim of improving their overall properties by introducing crosslinked carboxylic nitrile–butadiene nanorubber (CNBNR) into the ESMP network. The results show that the toughness of the CNBNR–ESMP nanocomposites greatly improved at both room temperature and the glass‐transition temperature (T_g) over that of the pure ESMP. Meanwhile, the increase in the toughness did not negatively affect other macroscopic properties. The CNBNR–ESMP nanocomposites presented improved thermal properties with a T_g in a stable range around 100 °C, enhanced thermal stabilities, and superior shape‐memory performance in terms of the shape‐fixing ratio, shape‐recovery ratio, shape‐recovery time, and repeatability of shape‐memory cycles. The combined property improvements and the simplicity of the manufacturing process demonstrated that the CNBNR–ESMP nanocomposites are desirable candidates for large‐scale applications in the engineering field as smart structural materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45780.