Thermal and mechanical properties of liquid silicone rubber composites filled with functionalized graphene oxide

To improve the thermal and mechanical properties of liquid silicone rubber (LSR) for application, the graphene oxide (GO) was proposed to reinforce the LSR. The GO was functionalized with triethoxyvinylsilane (TEVS) by dehydration reaction to improve the dispersion and compatibility in the matrix. The structure of the functionalized graphene oxide (TEVS‐GO) was evaluated by Thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectra, X‐ray diffraction (XRD), and energy dispersive X‐ray spectroscopy (EDX). It was found that the TEVS was successfully grafted on the surface of GO. The TEVS‐GO/LSR composites were prepared via in situ polymerization. The structure of the composites was verified by FTIR, XRD, and scanning electron microscopy (SEM). The thermal properties of the composites were characterized by TGA and thermal conductivity. The results showed that the 10% weight loss temperature (T₁₀) increased 16.0°C with only 0.3 wt % addition of TEVS‐GO and the thermal conductivity possessed a two‐fold increase, compared to the pure LSR. Furthermore, the mechanical properties were studied and results revealed that the TEVS‐GO/LSR composites with 0.3 wt % TEVS‐GO displayed a 2.3‐fold increase in tensile strength, a 2.79‐fold enhancement in tear strength, and a 1.97‐fold reinforcement in shear strength compared with the neat LSR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42582.     

Characterization and performance of dodecyl amine functionalized graphene oxide and dodecyl amine functionalized graphene/high‐density polyethylene nanocomposites: A comparative study

Dodecyl amine (DA) functionalized graphene oxide(DA‐GO) and dodecyl amine functionalized reduced graphene oxide (DA‐RGO) were produced by using amidation reaction and chemical reduction, then two kinds of well dispersed DA‐GO/high‐density polyethylene (HDPE) and DA‐RGO/HDPE nanocomposites were prepared by solution mixing method and hot‐pressing process. Thermogravimetric, X‐ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, X‐ray diffractions, and Raman spectroscopy analyses showed that DA was successfully grafted onto the graphene oxide surface by uncleophilic substitution and the amidation reaction, which increased the intragallery spacing of graphite oxide, resulting in the uniform dispersion of DA‐GO and DA‐RGO in the nonpolar xylene solvent. Morphological analysis of nanocomposites showed that both DA‐GO and DA‐RGO were homogeneously dispersed in HDPE matrix and formed strong interfacial interaction. Although the crystallinity, dynamic mechanical, gas barrier, and thermal stability properties of HDPE were significantly improved by addition of small amount of DA‐GO or DA‐RGO, the performance comparison of DA‐GO/HDPE and DA‐RGO/HDPE nanocomposites indicated that the reduction of DA‐GO was not necessary because the interfacial adhesion and aspect ratio of graphene sheets had hardly changed after reduction, which resulting in almost the same properties between DA‐GO/HDPE and DA‐RGO/HDPE nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39803.     

Fabrication of regenerated cellulose nanoparticles/waterborne polyurethane nanocomposites

Regenerated cellulose nanoparticles (RCNs) are ideal materials for new biomass polymer composites industries. RCNs and composites of RCNs and water‐borne polyurethane (RCN/WPU) were prepared using a facile and environmentally friendly approach without the use of any harmful chemicals. The morphological, thermal, and mechanical properties of the RCN/WPU nanocomposite were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), rheometer, wide‐angle X‐ray diffraction, and enzymatic hydrolysis. RCNs exhibited low crystallinity upon regeneration with an NaOH‐based aqueous solution, and were identified by SEM and TEM to consist of the more thermodynamically stable cellulose form. TGA showed that the thermal stability of RCN/WPU nanocomposites was increased by the addition of RCNs. Finally, enzymatic hydrolysis using cellulase indicated that the biodegradability of RCN/WPU nanocomposites was also improved. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46633.     

Microwave irradiation synthesis and characterization of RGO‐AgNPs/polystyrene nanocomposites

Polystyrene and reduced graphene oxide/silver (PSTY/RGO/AgNPs) nanocomposites were prepared via an in situ bulk polymerization method using two different preparation techniques. In the first approach, a mixture of silver nitrate, hydrazine hydrate, and polystyrene containing graphene oxide (PSTY/GO) were reduced by microwave irradiation (MWI) to obtain R‐(PSTY‐GO)/AgNPs nanocomposites. In the second approach, a mixture of the (RGO/AgNPs) nanocomposite, which was produced via MWI, and STY monomers were polymerized using an in situ bulk polymerization method to obtain PSTY‐RGO/AgNPs nanocomposites. The two nanocomposites were compared and characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, high‐resolution transmission electron microscopy, Differential scanning calorimetry, and thermogravimetric analysis. The results indicate that the nanocomposites obtained using the first approach, which involved MWI, exhibited a better morphology and dispersion with enhanced thermal stability compared to the nanocomposites prepared without MWI. POLYM. COMPOS., 35:2318–2323, 2014. © 2014 Society of Plastics Engineers     

Effect of graphene oxide on the properties of compatibilized polypropylene/ethylene-propylene-rubber blend

In this work, the effect of graphene oxide (GO) and its derivatives on the mechanical, thermal and morphological properties of nanocomposites based on polypropylene/ethylene-propylene rubber (PP/EPR) were investigated. In order to achieve a better dispersion of the nanofiller and to enhance its interaction with the polymer matrix, amine and alcohol grafted polypropylene were used as compatibilizers. These compatibilizers were synthesized by the reaction of polypropylene-grafted anhydride maleic (PP-g-MAH) with 1,12-dodecanediamine and 1,12-dodecanediol, respectively in the presence of dicumyl peroxide (DCP) by melt mixing. The nanocomposites were prepared via melt blending masterbatch process using Brabender mixer. The addition of functionalized GO and compatibilizers improved the tensile strength and Young’s modulus of PP/EPR nanocomposite. While the elongation and Izod impact strength were adversely affected. Furthermore, the TGA analysis showed that the incorporation of GO and compatibilizers improve significantly the thermal stability. SEM micrographs of the fractured surfaces of the nanocomposites revealed a good dispersion of functionalized GO in the polymer matrix.     

Preparation of polylactide/graphene composites from liquid‐phase exfoliated graphite sheets

Polylactide (PLA)/graphene nanocomposites were prepared by a facile and low‐cost method of solution‐blending of PLA with liquid‐phase exfoliated graphene using chloroform as a mutual solvent. Transmission electron microscopy (TEM) was used to observe the structure and morphology of the exfoliated graphene. The dispersion of graphene in PLA matrix was examined by scanning electron microscope, X‐ray diffraction, and TEM. FTIR spectrum and the relatively low I_D/I_G ratio in Raman spectroscopy indicate that the structure of graphene sheets (GSs) is intact and can act as good reinforcement fillers in PLA matrix. Thermogravimetric analysis and dynamic mechanical analysis reveal that the addition of GSs greatly improves the thermal stability of PLA/GSs nanocomposites. Moreover, tensile strength of PLA/GSs nanocomposites is much higher than that of PLA homopolymer, increasing from 36.64 (pure PLA) up to 51.14 MPa (PLA/GSs‐1.0). POLYM. COMPOS., 35:396–403, 2014. © 2013 Society of Plastics Engineers     

Preparation of polyester resin/graphene oxide nanocomposite with improved mechanical strength

Graphene oxide (GO) has attracted huge scientific interest due to its unique physical and chemical properties as well as its wide‐scale applicability including facile synthesis and high yield. Here, we report preparation of nanocomposites based on GO and unsaturated polyester resin (PE). The synthesized samples were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and tensile strength measurements. A good dispersion of the GO sheets within the resin matrix was observed from the morphological analysis. A significant enhancement in mechanical properties of the PE/GO composites is obtained at low graphene loading. Around 76% improvement of tensile strength and 41% increase of Young's modulus of the composites are achieved at 3 wt % loading of GO. Thermal analysis of the composite showed a noticeable improvement in thermal stability in comparison to neat PE. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Influence of structure of amines on the properties of amines‐modified reduced graphene oxide/polyimide composites

Graphene oxide (GO), as an important precursor of graphene, was functionalized using alkyl‐amines with different structure and then reduced to prepare reduced amines grafted graphene oxide (RAGOs) by N₂H₄ · H₂O. The successful chemical amidation reaction between amine groups of alkyl‐amines and carboxyl groups of GO was confirmed by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA). Then RAGOs/polyimide nanocomposites were prepared via in situ polymerization and thermal curing process with different loadings of RAGOs. The modification of amine chains lead to homogenous dispersion of RAGOs in the composites and it formed strong interfacial adhesion between RAGOs and the polymer matrix. The mechanical and electrical properties of polyimide (PI) were significantly improved by incorporation of a small amount of RAGOs, the influence of structure of amines grafted on RAGOs on the enhancement effects of composites was discussed. The research results indicated that the proper structure of amine could effectively enhance the properties of composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43820.     

Amino functionalization of multiwalled carbon nanotubes by gamma ray irradiation and its epoxy composites

In this paper, γ‐ray radiation technique was utilized to simply functionalize multi‐walled carbon nanotube (MWCNT) with amino groups. The successful amino functionalization of MWCNTs (MWCNTs‐Am) was proven and the physicochemical properties of MWCNTs before and after radiation grafting modifications were characterized using FT‐IR, X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The results indicated that the γ‐ray radiation had the visible effects on the surface properties of MWCNTs. The effects of various functionalized MWCNTs on morphological, thermal, and mechanical properties of an epoxy‐based nanocomposite system were investigated. Utilizing in situ polymerization, 1 wt% loading of MWCNT was used to prepare epoxy‐based nanocomposites. Compared to the neat epoxy system, nanocomposites prepared with MWCNT‐Am showed 13.0% increase in tensile strength, 20.0% increase in tensile modulus, and 24.1% increase in thermal decomposition temperature. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

The synthesis and characteristics of sodium alginate/graphene oxide composite films crosslinked with multivalent cations

Association of a method of the incorporation of graphene oxide (GO) into sodium alginate (Na‐alg) polymer matrix with a method of the use multivalent cations crosslinker was put forward to synthesize novel Na‐alg/GO nanocomposite films. The structures, morphologies, and the properties of Na‐alg/GO films were characterized by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM), thermogravimetric analysis (TGA), and tensile tests. The results revealed that the interlayer distance of GO sheets increased from 0.83 nm to 1.08 nm after assembling with Na‐alg, and Na‐alg inserted into GO layers crosslinking with multivalent cations increased the interlayer distance further. Ionic crosslinking significantly enhanced thermal and mechanical properties of Na‐alg/GO nanocomposite films. In particular, Fe³⁺ led to Na‐alg/GO nanocomposite films of significantly higher tensile strength and modulus than Ca²⁺ and Ba²⁺. The excellent thermal and mechanical properties of these novel Na‐alg/GO nanocomposite films may open up applications for Na‐alg films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43616.     

Synthesis and properties of click coupled graphene oxide sheets with three‐dimensional macromolecules

A facile click chemistry approach to the functionalization of three‐dimensional hyperbranched polyurethane (HPU) to graphene oxide (GO) nanosheets is presented. HPU‐functionalized GO samples of various compositions were synthesized by reacting alkyne‐functionalized HPU with azide‐functionalized GO sheets. The morphological characterization of the HPU‐functionalized GO was performed using transmission electron microscopy and its chemical characterization was carried out using Fourier transform‐infrared spectroscopy, nuclear magnetic resonance spectroscopy, and X‐ray photoelectron spectroscopy. The graphene sheet surfaces were highly functionalized, leading to improved solubility in organic solvents, and consequently, enhanced mechanical, thermal, and thermoresponsive and photothermal shape memory properties. The strategy reported herein provides a very efficient method for regulating composite properties and producing high performance materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43358.     

Influence of functionalized reduced graphene oxide and compatibilizer on mechanical,thermal and morphological properties of polypropylene/polybutene-1 (PP/PB-1) blends

Polypropylene/Polybutene-1 (PP/PB-1) blends and nanocomposites containing pristine partially reduced graphene oxide (rGO) and chemically functionalized rGO (FrGO) with silane, and silane grafted with 1,12-dodecanediamine and 1,12-dodecanediol were studied. The effects of the chemical treatments on structure and thermal stability of rGO were first thoroughly investigated. Attenuated total reflectance Fourier infrared (ATR-FTIR) spectroscopy analyses of FrGO evidenced the existence of functional groups on rGO after each chemical treatment, while X-ray diffraction (XRD) results confirmed the effectiveness of the interlayer grafting process through shifting of the basal spacings as witnessed by increased d₀₀₂ values. Furthermore, thermogravimetric analysis (TGA) revealed that the functionalization of rGO resulted in improved thermal stability of rGO demonstrated by its increased thermal degradation temperature. The PP/PB-1 blends and their rGO and FrGO based nanocomposites were prepared by melt blending masterbatch process in the presence of an acrylic acid modified polypropylene compatibilizer (PP-g-AA). Mechanical testing showed that Young’s modulus and tensile strength of the PP/PB-1 blends significantly improved after co-addition of FrGO and PP-g-AA to form the nanocomposites, but it also endowed a drastic decrease in their elongation at break and especially in their impact strength. XRD analyses attested the successful formation of intercalated nanocomposites, and scanning electron microscopy (SEM) examinations disclosed a two-phase morphology consisting of PB-1 dispersed droplets in the PP matrix. SEM also indicated that the incorporation of PP-g-AA into the blends and the nanocomposites contributed to enhanced adhesion and dispersion of PB-1 phase and FrGO nanoparticles within the polymer matrix.     

In situ preparation of transparent polyimide nanocomposite with a small load of graphene oxide

Polyimide (PI) nanocomposites with 4,4′‐bisphenol A dianhydride, 4,4′‐oxydiphthalic anhydride, and diaminodiphenyl methane (MDA) as comonomers and functionalized with graphene oxide (GO), were prepared by in situ polymerization. Only a small amount of GO (0.03–0.12 wt %) is added to improve the mechanical properties of PI and to avoid a substantial decrease of PI transparence. The nanocomposites are characterized by FTIR, X‐ray diffraction, thermogravimetric analysis, transmission electron microscope, tensile test, and UV‐vis spectroscopy. It is demonstrated that the PI/GO composite films possess transmittance of above 80% at wavelengths of 500–800 nm when the GO content is under 0.12 wt %, while the stress intensity and Young's modulus are improved by 29 and 25%, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of neodymium‐doped titanium dioxide nanoparticles on the structural,mechanical, and electrical properties of poly(butyl methacrylate) nanocomposites

Nanocomposites based on neodymium‐doped titanium dioxide (Nd‐TiO₂)/poly(n‐butyl methacrylate) (PBMA) have been prepared by an in situ polymerization of butyl methacrylate monomer with varying concentrations of Nd‐TiO₂ nanoparticles. The resulting nanocomposites have been analyzed by ultraviolet (UV)–Visible spectroscopy, Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and impedance analyzer (TGA). The results of UV and FTIR spectroscopy have indicated the interaction of nanoparticles with the PBMA matrix. Spherically shaped nanoparticles with an average size of 10–25 nm have been revealed in the TEM and their homogeneous dispersion, and interaction of polymer matrix has been confirmed by SEM and XRD studies. The thermal stability and glass transition temperature of the composites were significantly enhanced by the addition of nanoparticles. The AC conductivity and dielectric properties of nanocomposites have been found to be higher than pure PBMA, and the maximum electrical properties have been observed for 7 wt% composite. The reinforcing nature of the nanoparticles in PBMA has been reflected in the improvement in tensile strength measurements. The result indicated that the tensile strength of nanocomposites have greatly enhanced by the addition of Nd‐TiO₂ nanoparticles whereas the elongation at break decreases with the loading of nanofillers. To understand the mechanism of reinforcement, tensile strength values have been correlated with various theoretical modeling. The research has been found to be promising in the development of novel materials with enhanced tensile strength, dielectric constant, and thermal properties, which may find potential applications in energy storage and nanoelectronic devices. J. VINYL ADDIT. TECHNOL., 25:9–18, 2019. © 2018 Society of Plastics Engineers     

Effects of Nickel Oxide (NiO) nanoparticles on the performance characteristics of the jatropha oil based alkyd and epoxy blends

Plant oil based alkyd resin was prepared from jatropha oil and blended with epoxy resin. Subsequently, alkyd/epoxy/NiO nanocomposites with different wt % of NiO nanoparticles have been prepared by mechanical mixing of the designed components. The structure, morphology, and performance characteristics of the nanocomposites were studied by UV‐visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and universal testing machine (UTM). The alkyd/epoxy/NiO nanocomposites showed the gradual increase in thermal stability with increasing NiO content. With 3 wt % NiO content the tensile strength of the nanocomposite increased by 19 MPa (more than twofold) when compared with the pristine polymer. Limiting oxygen index (LOI) value of the nanocomposites indicate that the incorporation of NiO nanoparticles even in 1 wt % can greatly improves the flame retardant property of the nanocomposites. This study confirms the strong influence of NiO nanoparticles on the thermal, mechanical, and flame retardant properties of the alkyd/epoxy/NiO nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41490.     

Sonochemical synthesis and characterization of amine‐modified graphene/conducting polymer nanocomposites

The objective of this work is to modify graphene and study the effect of modification of graphene in thermal and electrical properties of graphene/polypyrrole and graphene/polyaniline nanocomposites. The amine functionalization of graphene was confirmed by Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The nanocomposites were prepared by insitu oxidative polymerization method using ammonium persulfate as oxidant. Field emission scanning electron microscopy and high‐resolution transmission electron microscopy were used to study the morphology of the nanocomposites which indicates toward the better dispersion of modified graphene within the polymer matrices as compared to unmodified composites. The modification of graphene played an important role in the noticeable improvements in electrical conductivity of the prepared composites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of graphene loading on thermomechanical properties of poly(vinyl alcohol)/starch blend

Polymer nanocomposites based on poly(vinyl alcohol) (PVA)/starch blend and graphene were prepared by solution mixing and casting. Glycerol was used as a plasticizer and added in the starch dispersion. The uniform dispersion of graphene in water was achieved by using an Ultrasonicator Probe. The composites were characterized by FTIR, tensile properties, X‐ray diffraction (XRD), thermal analysis, and FE‐SEM studies. FTIR studies indicated probable hydrogen bonding interaction between the oxygen containing groups on graphene surface and the –OH groups in PVA and starch. Mechanical properties results showed that the optimum loading of graphene was 0.5 wt % in the blend. XRD studies indicated uniform dispersion of graphene in PVA/starch matrix upto 0.5 wt % loadings and further increase caused agglomeration. Thermal studies showed that the thermal stability of PVA increased and the crystallinity decreased in the presence of starch and graphene. FE‐SEM studies showed that incorporation of graphene increased the ductility of the composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41827.     

Polymer nanocomposites: In situ polymerization of polyamide 6 in the presence of graphene oxide

Polyamide 6 (PA6)/graphene oxide (GO) nanocomposites were prepared via in situ , ring opening polymerization of ε‐caprolactam in the presence of both dried powder and colloidally dispersed single layer GO. Characterization of the composites and GO (both as received and after removal from the composites) was carried out using atomic force microscopy (AFM), Fourier transform infra‐red spectroscopy (FTIR), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), thermogravimetric analysis, differential scanning calorimetry and tensile testing. Reduction in the GO during polymerization was observed. So too was functionalization of the GO flakes with PA6 chains. FTIR demonstrates the retention of some carbonyl oxygen functionalities after polymerization. AFM imaging indicated the presence of single layer GO and the sheet height increased to ∼4 nm for graphene sheets after polymerization. This suggests the graphene acts as a base for polymer chain formation, leading to good interfacial interaction between the filler and matrix. Raman data show no evidence of the restoration of sp2 hybrid as a result of polymerization. The nanocomposites are thermally stable while molecular weight and crystallinity have both been affected by GO inclusion. A percentage linear increase in Young's modulus was observed as colloidally dispersed GO content increased. POLYM. COMPOS., 38:528–537, 2017. © 2015 Society of Plastics Engineers     

In situ Synthesis and mechanical,thermal properties of polyimide nanocomposite film by addition of functionalized graphene oxide

Polyimide (PI) and chemical modified graphene oxide nanocomposite films are prepared by in situ polymerization from solutions of pyromellitic dianhydride and 4,4′‐oxydianiline with various amount (0.5–2 wt%) of 3‐aminopropyltriethoxysilane (APTS) functionalized graphene oxide (GO) sheets in dimethylacetamide. The APTS functionalized GO (GO‐APTS) is a versatile platform for polymer grafting, improving excellent dispersion of GO in the PI matrix, and forming strong interaction with the PI matrix. The GO‐APTS/PI nanocomposites exhibited improvement in mechanical and thermal properties by addition of a small amount of GO‐APTS. With the addition of a small amount of GO‐APTS (1.5 wt%) to PI matrix, mechanical properties with the tensile strength and Young's modulus improved by 45% and 15%, respectively. The thermal analysis showed that the thermal stability of PI was slightly enhanced by the incorporation of GO‐APTS (1.5 wt%). This approach provides a strategy for developing high performance functionalized GO‐polymer composite materials. POLYM. COMPOS., 37:907–914, 2016. © 2014 Society of Plastics Engineers     

New polyurea MWCNTs nanocomposite films with enhanced mechanical properties

Polyurea nanocomposites represent a promising option in the development of advanced materials for applications that require high mechanical resistance. This article describes an optimized synthetic route for obtaining polyurea nanocomposites with enhanced mechanical properties by employing epoxy‐functionalized multiwalled carbon nanotubes (MWCNTs) as reinforcing agent. The experimental measurements revealed that these functionalized nanofillers have a positive effect on the properties of the composite only until they reach a certain concentration; therefore, the optimal composition was reported (the samples containing 0.2 weight % functionalized MWCNTs). The functionalization of the MWCNTs was confirmed through RAMAN, X‐ray photoelectron spectroscopy, scanning electron microscopy and thermogravimetric analysis, while the polyurea nanocomposites obtained have been characterized by thermal (differential scanning calorimetry and TGA) and mechanical (dynamic mechanical analysis and tensile tests) analyses. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45061.