Two-dimensional polarization encoding with a phase-only liquid-crystal spatial light modulator

We show how to two dimensionally encode the polarization state of an incident light beam using a parallel-aligned liquid-crystal spatial light modulator (LCSLM). Each pixel of the LCSLM acts as a voltage-controlled wave plate and can be programmed over a 2pi phase range at a wavelength of 514.5 nm. Techniques are reviewed for either rotating the major axis of elliptically polarized light or for converting an input linearly polarized beam into an arbitrary elliptically polarized beam. Experimental results are demonstrated in which we generate various two-dimensional spatial patterns of polarized light. Several potential applications are suggested. We also report an unexpected edge-enhancement effect that might be useful in image processing applications.     

Self-interferometric technique for visualization of phase patterns encoded onto a liquid-crystal display

We report a new self-interferometric technique for visualizing phase patterns that are encoded onto a phase-only liquid-crystal display (LCD). In our approach, the LCD generates both the desired object beam as well as the reference beam. Normally the phase patterns are encoded with a phase depth of 2pi radians, and all of the incident energy is diffracted into the first-order beam. However, by reducing this phase depth, we can generate an additional zero-order diffracted beam, which acts as the reference beam. We work at distances such that these two patterns spatially interfere, producing an interference pattern that displays the encoded phase pattern. This approach was used recently to display the phase vortices of helical Ince-Gaussian beams. Here we show additional experimental results and analyze the process.     

Spatially resolved phase imaging of a programmable liquid-crystal grating

Phase imaging is used to compare near-field measurements with the corresponding far-field intensity distribution. A liquid-crystal device serves as a phase object that can be programmed as a variable grating. Real-time phase visualization then provides an avenue for direct optimization of complex phase gratings.     

Diffraction-based determination of the phase modulation for general spatial light modulators

We describe a characterization method based on diffraction for obtaining the phase response of spatial light modulators (SLMs), which in general exhibit both amplitude and phase modulation. Compared with the conventional interferometer-based approach, the method is characterized by a simple setup that enables in situ measurements, allows for substantial mechanical vibration, and permits the use of a light source with a fairly low temporal coherence. The phase determination is possible even for a SLM with a full amplitude modulation depth, i.e., even if there are nulls in the amplitude transmission characteristic of the SLM. The method successfully determines phase modulation values in the full 2pi rad range with high accuracy. The experimental work includes comparisons with interferometer measurements as well as a SLM characterization with a light-emitting diode (LED).     

Polarization eigenstates for twisted-nematic liquid-crystal displays

We derive theoretical expressions for the eigenvalues and the eigenvectors for a twisted-nematic liquid-crystal display (LCD) as a function of the twist angle and the birefringence by use of the Jones-matrix formalism. These polarization eigenvectors are of particular interest for phase-only transmission because they propagate unchanged through the display. We find that the eigenvectors are elliptically polarized and that the ellipticity changes as a function of the birefringence of the LCD (which is proportional to the external voltage applied to the display). We can define an average eigenvector over a desired range for the applied voltage. We show, using Jones matrices, how this average eigenvector can be generated using a quarter-wave plate and a linear polarizer having appropriate orientation angles. Using this average eigenvector, we show that superior phase-only operation can be obtained over a given operating range for the LCD compared with other approaches.     

Spherical aberration correction using a liquid-crystal spatial-light modulator in off-axis electron holography

One can correct spherical aberration in a transmission electron microscope by using a newly developed aberration-correction method involving off-axis electron holography. In this method, a liquid-crystal spatial-light modulator (LC SLM) is employed during the holographic reconstruction step to compensate for spherical aberration. Application of this method to high-resolution off-axis electron holograms of fine gold particles is presented. The phase distribution of the corrected object wave is visualized by the Zernike phase-contrast method carried out with the same LC SLM.     

Optical encryption system with a binary key code

A double-random-phase optical encryption system that uses a binary key code is proposed. The key code is generated as a binary computer-generated hologram. The binary key code can be displayed on a binary spatial light modulator (SLM) such as a ferroelectric liquid-crystal display. The use of a binary SLM enables us to renew the key at high speed. A joint transform correlator based on a photorefractive crystal in the Fourier domain is used to perform shift-invariant encryption and decryption. Computer simulations of the effects of using a binary encoded key code instead of a complex amplitude key code are shown. Preliminary optical experimental results are presented to demonstrate the effectiveness of the proposed system.     

Spatial light modulator-controlled alignment and spinning of birefringent particles optically trapped in an array

We demonstrate the use of a phase-only liquid-crystal spatial light modulator (SLM) for polarization-controlled rotation and alignment of an array of optically trapped birefringent particles. A collimated beam incident upon a two-dimensional lenslet array yields multiple foci, scaled to produce optical gradient traps with efficient three-dimensional trapping potentials. The state of polarization of each trapping beam is encoded by the SLM, which acts as a matrix of wave plates with computer-controlled phase retardations. Control of the rotation frequency and alignment direction of the particles is achieved by the transfer of tunable photon spin angular momentum.     

Suppression of the zero-order diffracted beam from a pixelated spatial light modulator by phase compression

Phase compression is used to suppress the on-axis zero-order diffracted (ZOD) beam from a pixelated phase-only spatial light modulator (SLM) by a simple modification to the computer generated hologram (CGH) loaded onto the SLM. After CGH design, the phase of each SLM element is identically compressed by multiplying by a constant scale factor and rotated on the complex unit-circle to produce a cancellation beam that destructively interferes with the ZOD beam. Experiments achieved a factor of 3 reduction of the ZOD beam using two different liquid-crystal SLMs. Numerical simulation analyzed the reconstructed image quality and diffraction efficiency versus degree of phase compression and showed that phase compression resulted in little image degradation or power loss.     

Polarization properties of a nematic liquid-crystal spatial light modulator for phase modulation

The polarization properties of a nematic zero-twist liquid-crystal (NLC) spatial light modulator (SLM) were studied. A large ratio between the liquid-crystal (LC) layer thickness and the pixel pitch combined with spatial variations in the applied electric field causes fringing fields between pixels. Depending on the LC alignment, the electric field components within the LC layer can result in a twist deformation. The produced inhomogeneous optical anisotropy affects the polarization of light propagating through the device. We experimentally examined polarization effects in different diffraction orders for both binary and blazed phase gratings. Simulations of the LC deformation together with finite-difference time-domain simulations for the optical propagation were used to calculate the corresponding far-field intensities. It was demonstrated how rigorous simulations of the NLC SLM properties can be used to understand the polarization features of different diffraction orders.     

Modulation light efficiency of diffractive lenses displayed in a restricted phase-mostly modulation display

We present an analysis of the diffraction efficiency of diffractive lenses displayed on spatial light modulators that depends on the modulation response of the display. An ideal display would produce continuous phase-only modulation, reaching a maximum phase-modulation depth of 2pi. We introduce the concept of modulation diffraction efficiency that accounts for the effect of nonlinearities only in the phase modulation of the display. We review a diffractive model with which to evaluate this modulation efficiency, including modulation defects such as nonlinear phase modulation, coupled amplitude modulation, phase quantization, and a limited modulation depth. We apply this diffractive model to Fresnel lenses and show that these modulation defects produce a lens multiplex effect. Finally we demonstrate that the application of a minimum Euclidean projection principle leads to high modulation diffraction efficiency even if the phase-modulation depth is much less than 2pi. We demonstrate that the modulation efficiency can exceed 90% for a modulation depth of 1.4pi and can exceed 40% (the equivalent for a binary phase element) for a modulation depth of only 0.7pi. Experimental results from use of a twisted nematic liquid-crystal display are presented to confirm these conclusions.     

Amplitude Apodizers Encoded onto Fresnel Lenses Implemented on a Phase-Only Spatial Light Modulator

We show that both a lens and a nonuniform amplitude transmission filter can be encoded simultaneously onto a twisted nematic liquid-crystal spatial light modulator (SLM) working in the phase-only mode. The inherent equivalent apodization that is due to the pixelated structure of the SLM is compensated for. In addition, different types of nonuniform transmission pupil such as transverse apodizing, transverse hyperresolving, and axial hyperresolving (multifocusing) filters are implemented. The excellent agreement between numerical and experimental results shows the capability of this method to encode amplitude apodizers on a phase-only SLM.     

Optical correlation by use of partial phase-only modulation with VGA liquid-crystal displays

The development of liquid-crystal panels for use in commercial equipment has been aimed at improving the pixel resolution and the display efficiency. These improvements have led to a reduction in the thickness of such devices, among other outcomes, that involves a loss in phase modulation. We propose a modification of the classical phase-only filter to permit displays in VGA liquid-crystal panels with a constant amplitude modulation and less than a 2pi phase modulation. The method was tested experimentally in an optical setup.     

Synthesis of three-dimensional light fields with binary spatial light modulators

Computation of a binary spatial light modulator (SLM) pattern that generates a desired light field is a challenging quantization problem for which several algorithms have been proposed, mainly for far-field or Fourier plane reconstructions. We study this problem assuming that the desired light field is synthesized within a volumetric region in the non-far-field range after free space propagation from the SLM plane. We use Fresnel and Rayleigh-Sommerfeld scalar diffraction theories for propagation of light. We show that, when the desired field is confined to a sufficiently narrow region of space, the ideal gray-level complex-valued SLM pattern generating it becomes sufficiently low pass (oversampled) so it can be successfully halftoned into a binary SLM pattern by solving two decoupled real-valued constrained halftoning problems. Our simulation results indicate that, when the synthesis region is considered, the binary SLM is indistinguishable from a lower resolution full complex gray-level SLM. In our approach, free space propagation related computations are done only once at the beginning, and the rest of the computation time is spent on carrying out standard image halftoning.     

Switches from pi- to sigma-bonding complexes controlled by gate voltages

A conjugated polymer/metal ion/liquid-crystal molecular system was set between source and drain electrodes with a 100 nm gap. When gate voltage (Vg) increases, the current between source and drain electrodes increases. Infrared spectra show this system to be composed of pi and sigma complexes. At Vg = 0, the pi complex dominates the sigma complex, whereas the sigma complex becomes dominant when Vg is switched on. Calculations found that the pi complex has lower conductivity than the sigma complex.     

Beam steering experiment with two cascaded ferroelectric liquid-crystal spatial light modulators

The design, construction, and evaluation of a laser beam steerer that uses two binary ferroelectric liquid-crystal (FLC) spatial light modulators (SLMs) operated in conjunction are presented. The system is characterized by having few components and is in principle lossless. Experimentally, a throughput of approximately 20% was achieved. The simple system design was achieved because of the high tilt angle FLC material used in the SLMs, which were specifically designed and manufactured for this study. By coherently imaging the first SLM onto the second SLM, pixel by pixel, we obtained an effective four-level phase structure with a phase step of 90 degrees. An appropriate alignment procedure is presented. The beam steering performance of the system is reported and analyzed.     

Diffractive optical elements designed for highly precise far-field generation in the presence of artifacts typical for pixelated spatial light modulators

Diffractive optical elements (DOEs) realized by spatial light modulators (SLMs) often have features that distinguish them from most conventional, static DOEs: strong coupling between phase and amplitude modulation, a modulation versus steering parameter characteristic that may not be precisely known (and may vary with, e.g., temperature), and deadspace effects and interpixel cross talk. For an optimal function of the DOE, e.g. as a multiple-beam splitter, the DOE design must account for these artifacts. We present an iterative design method in which the optimal setting of each SLM pixel is carefully chosen by considering the SLM artifacts and the design targets. For instance, the deadspace-interpixel effects are modeled by dividing the pixel to be optimized, and its nearest neighbors, into a number of subareas, each with its unique response and far-field contribution. Besides the customary intensity control, the design targets can also include phase control of the optical field in one or more of the beams in the beam splitter. We show how this can be used to cancel a strong unwanted zeroth-order beam, which results from using a slightly incorrect modulation characteristic for the SLM, by purposely sending a beam in the same direction but with the opposite phase. All the designs have been implemented on the 256 x 256 central pixels of a reflective liquid crystal on silicon SLM with a selected input polarization state and a direction of transmission axis of the output polarizer such that for the available different pixel settings a phase modulation of ~2pi rad could be obtained, accompanied by an intensity modulation depth as high as >95%.     

Phase calibration of spatially nonuniform spatial light modulators

A new 512 x 512 pixel phase-only spatial light modulator (SLM) has been found to deviate from being flat by several wavelengths. Also, the retardation of the SLM relative to voltage varies across the device by as much as 0.25 wavelength. The birefringence of each pixel as a function of address voltage is measured from the intensity of the SLM between crossed polarizers. To these responses are added a reference spatial phase measured by phase shifting interferometry for a single address voltage. Fits to the measured data facilitate the compensation of the SLM to a root-mean-square wave-front error of 0.06 wavelength. The application of these corrections to flatten the full aperture of the SLM sharpens the focal plane spot and reduces the distortion of computer-designed diffraction patterns.     

Fringing fields in a liquid crystal spatial light modulator for beam steering

Abstract

Phase modulating spatial light modulators (SLMs) can be used to alter the shape of a laser wavefront to achieve a deflection or change in the shape of a laser beam. This paper reports the results of characterization, simulation and optimization of a one-dimensional liquid crystal (LC) SLM. The device has a large ratio between LC layer thickness and pixel pitch that results in a fringing field between pixels. In effect, the applied phase patterns will be lowpass filtered and the loss of high frequency components limits, for instance, the usable steering range. A method is presented where intensity measurements in the far field are used to determine how the phase modulation at the SLM is distorted. The inhomogeneous optical anisotropy of the device was determined by modelling the liquid crystal director distribution within the electrode-pixel structure. Finite-difference time-domain (FDTD) simulations were used to calculate the light propagation through the LC. The simulated phase distortion was compared with the experimental results. A voltage compensation scheme to improve the diffraction efficiency was developed utilizing the measured and simulated results. It is demonstrated that a modification of the voltage patterns can give a better realization of high frequency components in the phase distribution and an increase in maximum steering angle by a factor two.