Removal of basic dyes from aqueous solutions using starch‐graft‐acrylic acid copolymers

Graft copolymerization of acrylic acid (AA) onto starch was carried out with ceric ammonium nitrate as initiator under nitrogen atmosphere. The grafting percentages (GP%) of starch‐graft‐AA (St‐gr‐AA) copolymers were determined. When the AA molar concentrations were 0.3 and 0.5 mol/L, GP% of St‐gr‐AA copolymers were 10.5% (St‐gr‐AA‐1) and 14% (St‐gr‐AA‐2), respectively. St‐gr‐AA copolymers have been used for the adsorption of basic dye (Safranine T) from aqueous solutions. Effects of various parameters such as treatment time, initial pH of the solution (pH = 2–6), initial dye concentration (50– 500 mg/L), and GP% of starch graft copolymers were investigated.Basic dye removal capacities of the copolymers increase along with the augment of initial concentration of the adsorbate, GP% of the copolymers, and pH. The adsorption capacities for St‐gr‐AA‐1 and St‐gr‐AA‐2 reach 116.5 and 204 mg/g, respectively. Equilibrium adsorption data were obtained and fitted very well to Freundlich model. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Competitive Removal of Heavy Metal Ions by Starch-Graft-Acrylic Acid Copolymers

Graft copolymerization of acrylic acid (AA) onto starch was carried out with ceric ammonium nitrate as initiator under nitrogen atmosphere. The structures of the synthesized graft copolymers were identified by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The grafting percentages (GP%) of starch-graft-acrylic acid (S-g-AA) copolymers were determined. Increasing the molar concentration of AA from 0.1 to 0.5 mol/L caused a significant increase in the GP%. The effect of GP% of S-g-AA copolymers on the competitive removal of Pb²⁺, Cu²⁺, Cd²⁺ ions from aqueous solution was investigated at pH 4.5. The concentrations of each ion in aqueous solution were equal to each other, which were kept constant at 4 mmol/L. Metal ion removal capacities were determined by atomic absorption spectrophotometer (AAS). Metal ion removal capacities of S-g-AA copolymers rose with the increase in GP% of the copolymers and the order of the removal of heavy metal ions was Pb²⁺ > Cu²⁺ > Cd²⁺.     

Competitive removal of heavy metal ions by cellulose graft copolymers

The effect of composition of graft chains of four types cellulose graft copolymers on the competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solution was investigated. The copolymers used were (1) cellulose‐g‐polyacrylic acid (cellulose‐g‐pAA) with grafting percentages of 7, 18, and 30%; (2) cellulose‐g‐p(AA–NMBA) prepared by grafting of AA onto cellulose in the presence of crosslinking agent of N,N′‐methylene bisacrylamide (NMBA); (3) cellulose‐g‐p(AA–AASO₃H) prepared by grafting of a monomer mixture of acrylic acid (AA) and 2‐acrylamido‐2‐methyl propane sulphonic acid (AASO₃H) containing 10% (in mole) AASO₃H; and (4) cellulose‐g‐pAASO₃H obtained by grafting of AASO₃H onto cellulose. The concentrations of ions which were kept constant at 4 mmol/L in an aqueous solution of pH 4.5 were equal. Metal ion removal capacities and removal percentages of the copolymers was determined. Metal ion removal capacity of cellulose‐g‐pAA did not change with the increase in grafting percentages of the copolymer and determined to be 0.27 mmol metal ion/g_copolymer. Although the metal removal rate of cellulose‐g‐p(AA–NMBA) copolymer was lower than that of cellulose‐g‐pAA, removal capacities of both copolymers were the same which was equal to 0.24 mmol metal ion/g_copolymer. Cellulose did not remove any ion under the same conditions. In addition, cellulose‐g‐pAASO₃H removed practically no ion from the aqueous solution (0.02 mmol metal ion/g_copolymer). The presence of AASO₃H in the graft chains of cellulose‐g‐p(AA–AASO₃H) created a synergistic effect with respect to metal removal and led to a slight increase in metal ion adsorption capability in comparison to that of cellulose‐g‐pAA. All types of cellulose copolymers were found to be selective for the removal of Pb²⁺ over Cu²⁺ and Cd²⁺. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2034–2039, 2003     

Synthesis of polyamidoxime chelating ligand from polymer‐grafted corn‐cob cellulose for metal extraction

A conventional free‐radical initiating process was used to prepare graft copolymers from acrylonitrile (AN) with corn‐cob cellulose with ceric ammonium nitrate (CAN) as an initiator. The optimum grafting was achieved with corn‐cob cellulose (anhydroglucose unit, AGU), mineral acid (H₂SO₄), CAN, and AN at concentrations of 0.133, 0.081, 0.0145, and 1.056 mol/L, respectively. Furthermore, the nitrile functional groups of the grafted copolymers were converted to amidoxime ligands with hydroxylamine under basic conditions of pH 11 with 4 h of stirring at 70°C. The purified acrylic polymer‐grafted cellulose and polyamidoxime ligand were characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy analysis. The ligand showed an excellent copper binding capacity (4.14 mmol/g) with a faster rate of adsorption (average exchange rate = 7 min), and it showed a good adsorption capacity for other metal ions as well. The metal‐ion adsorption capacities of the ligand were pH‐dependent in the following order: Cu²⁺ > Co²⁺ > Mn²⁺ > Cr³⁺ > Fe³⁺ > Zn²⁺ > Ni²⁺. The metal‐ion removal efficiency was very high; up to 99% was removed from the aqueous media at a low concentration. These new polymeric chelating ligands could be used to remove aforementioned toxic metal ions from industrial wastewater. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40833.     

Starch–acrylics graft copolymers and blends: Synthesis,characterization, and applications as matrix for drug delivery

A series of acrylic monomers–starch graft copolymers were prepared by ceric ion initiation method by varying the amount of monomers. These graft copolymers were characterized by IR and ¹³C‐NMR spectroscopy. It was seen that as the concentration of monomer [acrylic acid (AA), methacrylic acid (MA), and methyl methacrylate (MMA)] increased the percent add‐on increased in all the graft copolymers, whereas grafting efficiency increased initially but showed a slight decrease with further increase in the monomer concentration (except for MMA). The release rate of paracetamol as a model drug from graft copolymers as well as their blends was studied at two different pH, 1.2 and 7.4, spectrophotometrically. The release of paracetamol in phosphate buffer solution at pH 1.2 was insignificant in the first 3 h for St‐g‐PAA‐ and St‐g‐PMA‐graft copolymers, which was attributed to the matrix compaction and stabilization through hydrogen bonding at lower pH. At pH 7.4, the release rate was seen to decrease with increase in add‐on. The tablet containing poly(methyl methacrylate) (PMMA) did not disintegrate at the end of 30–32 h, which may be attributed to the hydrophobic nature of PMMA. These results indicate that the graft copolymers may be useful to overcome the harsh environment of the stomach and can be used as excipients in colon‐targeting matrices. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(hydroxamic acid) chelating resin from poly(methyl acrylate)‐grafted sago starch

A new chelating ion‐exchange resin containing the hydroxamic acid functional group was synthesized from poly(methyl acrylate) (PMA)‐grafted sago starch. The PMA grafted copolymer was obtained by a free‐radical initiating process in which ceric ammonium nitrate was used as an initiator. Conversion of the ester groups of the PMA‐grafted copolymer into hydroxamic acid was carried out by treatment of an ester with hydroxylamine in an alkaline solution. The characterization of the poly(hydroxamic acid) chelating resin was performed by FTIR spectroscopy, TG, and DSC analyses. The hydroxamic acid functional group was identified by infrared spectroscopy. The chelating behavior of the prepared resin toward some metal ions was investigated using a batch technique. The binding capacities of copper, iron, chromium, and nickel were excellent and the copper capacity was maximum (3.46 mmol g⁻¹) at pH 6. The rate of exchange of the copper ion was very fast that is, t_1/2 < 5 min. It was also observed that the metal ion‐sorption capacities of the resin were pH‐dependent and its selectivity toward the metal ions used is in the following order: Cu²⁺ > Fe³⁺ > Cr³⁺ > Ni²⁺ > Co²⁺ > Zn²⁺ > Cd²⁺ > As³⁺ > Pb²⁺. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1256–1264, 2001     

Removal of Cu2+ Ions from Aqueous Solutions by Starch-Graft-Acrylic Acid Hydrogels

Gelatinized starch was prepared by constantly stirring a mixture of starch and water at 95°C for 1 hour. Starch-graft-acrylic acid (S-g-AA) hydrogels were prepared by grafting acrylic acid (AA) [monomer/starch (w/w) 0.5–1.5] onto gelatinized starch with ceric ammonium nitrate as initiator under nitrogen atmosphere. The surface morphology of samples was studied using a scanning electron microscope (SEM). The hydrogels were evaluated for the removal of Cu²⁺ ion from aqueous solutions at different pH. The concentration of Cu²⁺ ion in aqueous solution was kept constant at 4 mmol/L. The metal ion removal capacities changed depending on treatment time, initial pH of the solution, and monomer/starch (w/w) ratio of the S-g-AA hydrogels. Cu²⁺ ion removal capacities were determined by atomic absorption spectrometer (AAS).     

Conversion of soybean oil into ion exchange resins: Removal of copper (II), nickel (II), and cobalt (II) ions from dilute aqueous solution using carboxylate‐containing resin

An ion‐exchange resin containing carboxylic acid groups was prepared by reaction of epoxidized soybean oil with triethylene tetramine, followed by hydrolysis of glycerides by using sodium hydroxide solution. The cation exchange capacity of the resins was determined to be 3.50 mequiv/g. The adsorption capacity for Cu²⁺, Ni²⁺, and Co²⁺ on the obtained resin at pH 5.0 was found to be 192, 96, and 78 mg/g, respectively. Effect of pH on the adsorption capacity for copper (II), nickel (II), and cobalt (II) ions were also studied. Cu²⁺, Ni²⁺, and Co²⁺ were adsorbed at a pH above 3. These metal ions adsorbed on the resin are easily eluted by using 1N HCl solution. The selectivity of the resin for Cu²⁺ from mixtures containing Cu²⁺/Co²⁺/Ni²⁺ ions in the presence of sodium chloride was also investigated © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2386–2396, 2002     

Synthesis of azo‐functionalized ion‐imprinted polymeric resin for selective extraction of nickel(II) ions

The work presented involved the fabrication and evaluation of an ion‐imprinted azo‐functionalized phenolic resin for selective extraction of Ni²⁺ ions from aqueous media. The azo‐containing ligand was first synthesized by coupling of a p‐aminophenol diazonium salt with resorcinol. The ligand was coordinated with Ni²⁺ ion template before condensation polymerization with formaldehyde and resorcinol was performed. The Ni²⁺ ions were extracted from the crosslinked resin matrix to finally afford the Ni²⁺ ion‐imprinted Ni‐PARF adsorbent. The synthetic steps were extensively investigated using elemental analysis and Fourier transform infrared, NMR and energy‐dispersive X‐ray spectroscopies. Also, the surface morphologies along with the surface areas of the adsorbent resin were evaluated using scanning electron microscopy and Brunauer–Emmett–Teller techniques, respectively. Batch experiments indicated that the pseudo‐second‐order kinetic equation provided the best fit with the experimentally obtained kinetic data and equilibrium was reached after 40 min. The isotherm studies were also in a good fit with the Langmuir model and the maximum adsorption capacities of Ni²⁺ ions with respect to both Ni‐PARF and control non‐imprinted C‐PARF adsorbents were around 260 and 100 mg g^?1, respectively. In the presence of Co²⁺, Cu²⁺, Zn²⁺ and Pb²⁺ as competing coexisting ions, the relative selectivity coefficients of Ni‐PARF for Ni²⁺ were, respectively, 84.91, 44.97, 30.41 and 32.20. Regeneration experiments indicated that after eight adsorption/desorption cycles, the Ni‐PARF adsorbent still maintained around 97% of its initial efficiency. © 2018 Society of Chemical Industry     

Stability constants of amidoximated chitosan‐g‐poly(acrylonitrile) copolymer for heavy metal ions

Amidoximated chitosan‐g‐poly(acrylonitrile) (PAN) copolymer was prepared by a reaction between hydroxylamine and cyano group in chitosan‐g‐PAN copolymer prepared by grafting PAN onto crosslinked chitosan with epychlorohydrine. The adsorption and desorption capacities for heavy metal ions were measured under various conditions. The adsorption capacity of amidoximated chitosan‐g‐PAN copolymer increased with increasing pH values, and was increased for Cu²⁺ and Pb²⁺ but a little decreased for Zn²⁺ and Cd²⁺ with increasing PAN grafting percentage in amidoximated chitosan‐g‐PAN copolymer. In addition, desorption capacity for all metal ions was increased with increasing pH values in contrast to the adsorption results. Stability constants of amidoximated chitosan‐g‐PAN copolymer were higher for Cu²⁺ and Pb²⁺ but lower for Zn²⁺ and Cd²⁺ than those of crosslinked chitosan. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 469–476, 1999     

Removal of cobalt ions from aqueous solutions by using poly(N,N‐dimethylaminopropyl methacrylamide/itaconic acid) hydrogels

In this study, N,N‐dimethylaminopropyl methacrylamide (DMAPMAm) homopolymer and DMAPMAm/itaconic acid (DMAPMAm/IA) copolymers were obtained from ⁶⁰Co‐γ radiation polymerization. Gel fraction and percentage of swelling values were calculated through gravimetrical calculations. In order to increase the swelling of the hydrogel, the amount of IA in initial copolymer composition was gradually increased, but it was observed that gelation values were low. The structural and morphological assessments of homopolymer and copolymers were made by means of several techniques including Fourier Transform Infrared Spectroscopy (FT‐IR), Scanning Electron Microscopy (SEM), and Energy‐Dispersive X‐ray Spectroscopy (EDS). The cobalt ion (Co²⁺) removal capacities of hydrogel were investigated by taking into account of the initial metal ion concentration and pH of aqueous medium. When it came to the maximum capacity of values obtained from adsorption experiments by using Co²⁺ solutions at pH 5, they changed between 220 and 245 mg Co²⁺/g dry hydrogel. FT‐IR, SEM, EDS, and XRD analyses were carried out for enlightening the mechanism of Co²⁺ removal by hydrogels after the completion of adsorption. Also, desorption studies were conducted using ethylenediaminetetraacetic acid (EDTA). Finally, within approximately 5 days, all adsorbed Co²⁺ ions were released from hydrogels at pH 5 using 0.1M EDTA solution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39569.     

Synthesis and characterization of poly(hydroxamic acid)–poly(amidoxime) chelating ligands from polymer‐grafted acacia cellulose

Graft copolymerization of methyl acrylate (MA) and acrylonitrile (AN) onto acacia cellulose was carried out using free radical initiating process in which ceric ammonium nitrate (CAN) was used as an initiator. The optimum grafting yield was determined by the certain amount of acacia cellulose (AGU), mineral acid (H₂SO₄), CAN, MA, and AN at 0.062, 0.120, 0.016, 0.397, and 0.550 mol L^?1, respectively. The poly(methyl acrylate‐co‐acrylonitrile)‐grafted acacia cellulose was obtained at 55°C after 2‐h stirring, and purified acrylic polymer‐grafted cellulose was characterized by FTIR and TG analysis. Therein, the ester and nitrile functional groups of the grafted copolymers were reacted with hydroxylamine solution for conversion into the hydroxamic acid and amidoxime ligands. The chelating behavior of the prepared ligands toward some metal ions was investigated using batch technique. The metal ions sorption capacities of the ligands were pH dependent, and the sorption capacity toward the metal ions was in the following order: Zn²⁺ > Fe³⁺ > Cr³⁺ > Cu²⁺ > Ni²⁺. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Phase behavior of temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) in dilute aqueous solution

Several different composition temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) (P(AA‐g‐NIPAM)) graft copolymers were synthesized by free‐radical copolymerization utilizing macromonomer technique. The phase behavior and conformation change of P(AA‐g‐NIPAM) in aqueous solutions were investigated by UV–vis transmittance measurements, fluorescence probe, and fluorescence quenching techniques. The results demonstrate that the P(AA‐g‐NIPAM) copolymers have temperature‐ and pH‐sensitivities, and these different composition graft copolymers have different lower critical solution temperature (LCST) and critical phase transition pH values. The LCST of graft copolymer decreases with increasing PNIPAM content, and the critical phase transition pH value increases with increasing Poly(N‐isopropylacrylamide) (PNIPAM) content. At room temperature (20°C), different composition of P(AA‐g‐NIPAM) graft copolymers in dilute aqueous solutions (0.001 wt %) have a loose conformation, and there is no hydrophobic microdomain formation within researching pH range (pH 3 ～ 10). In addition, for the P(AA‐g‐NIPAM) aqueous solutions, transition from coil to globular is an incomplete reversible process in heating and cooling cycles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Nickel(II)‐imprinted monolithic columns for selective nickel recognition

Ni²⁺‐imprinted monolithic column was prepared for the removal of nickel ions from aqueous solutions. N‐Methacryloyl‐L ‐histidine was used as a complexing monomer for Ni²⁺ ions in the preparation of the Ni²⁺‐imprinted monolithic column. The Ni²⁺‐imprinted poly(hydroxyethyl methacrylate‐N‐methacryloyl‐L ‐histidine) (PHEMAH) monolithic column was synthesized by bulk polymerization. The template ion (Ni²⁺) was removed with a 4‐(2‐pyridylazo) resorcinol (PAR):NH₃? NH₄Cl solution. The water‐uptake ratio of the PHEMAH–Ni²⁺ monolith increased compared with PHEMAH because of the formation of nickel‐ion cavities in the polymer structure. The adsorption of Ni²⁺ ions on both the PHEMAH–Ni²⁺ and PHEMAH monoliths were studied. The maximum adsorption capacity was 0.211 mg/g for the PHEMAH–Ni²⁺ monolith. Fe³⁺, Cu²⁺, and Zn²⁺ ions were used as competitive species in the selectivity experiments. The PHEMAH–Ni²⁺ monolithic column was 268.8, 25.5, and 10.4 times more selective than the PHEMAH monolithic column for the Zn²⁺, Cu²⁺, and Fe³⁺ ions, respectively. The PHEMAH–Ni²⁺ monolithic column could be used repeatedly without a decrease in the Ni²⁺ adsorption capacity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Chelation ion‐exchange properties of copolymer resin derived from 4‐hydroxyacetophenone,oxamide, and formaldehyde

A copolymer (4‐HAOF) prepared by condensation of 4‐hydroxyacetophenone and oxamide with formaldehyde in the presence of an acid catalyst proved to be a selective chelating ion‐exchange copolymer for certain metals. Chelating ion‐exchange properties of this copolymer were studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal‐ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Hg²⁺ ions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 787–790, 2003     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Copolymer resin. VII. 8‐hydroxyquinoline‐5‐sulfonic acid–thiourea–formaldehyde copolymer resins and their ion‐exchange properties

8‐Hydroxyquinoline‐5‐sulfonic acid–thiourea–formaldehyde copolymer resins were synthesized through the condensation of 8‐hydroxyquinoline‐5‐sulfonic acid and thiourea with formaldehyde in the presence of hydrochloric acid as a catalyst and with various molar ratios of the reacting monomers. The resulting copolymers were characterized with UV‐visible, IR and 1H‐NMR spectral data, employed to determine the reactivity of monomers. The average molecular weights of these resins were determined with vapor pressure osmometry and conductometric titration in a nonaqueous medium. The chelation ion‐exchange properties were also studied with the batch equilibrium method. The resins were proved to be selective chelating ion‐exchange copolymers for certain metals. The chelation ion‐exchange properties of these copolymers were studied for Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, and Fe³⁺ ions. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymers showed a higher selectivity for Fe³⁺ ions than for Cu²⁺, Ni²⁺, Co²⁺, and Pb²⁺ ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel porous organic triazine‐based polyimide with high nitrogen levels for highly efficient removal of Ni(II) from aqueous solution

In this study, a porous organic triazine‐based polyimide (PPI network) was prepared from 2,4,6‐tris(hydrazino)‐s‐triazine and 3,4,9,10‐perylenetetracarboxylic dianhydride. TGA, Fourier transform infrared spectroscopy, field emission SEM, XRD and a nitrogen sorption study confirmed the PPI network structure. Then, the synthesized PPI network was used to evaluate Ni²⁺ ion removal from aqueous solution and the effective parameters on adsorption functions of Ni²⁺ ions such as initial concentration, contact time and pH of the solution in batch adsorption experiments was studied. The results showed that the maximum adsorption capacity (q_m) of Ni²⁺ ions was 36.1 mg g^?1 in only 30 min with a pH of 7. The kinetics and adsorption isotherm were identified to be better fitted by the pseudo‐second‐order model and the Langmuir model, respectively. Based on the results, the proposed adsorbent has good potential for removing Ni²⁺ ions from aqueous solutions. © 2019 Society of Chemical Industry     

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid): Synthesis,characterization, and retention properties for environmentally impacting metal ions

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) [P(AGA‐co‐APSA)] was synthesized by radical polymerization in an aqueous solution. The water‐soluble polymer, containing secondary amide, hydroxyl, carboxylic, and sulfonic acid groups, was investigated, in view of their metal‐ion‐binding properties, as a polychelatogen with the liquid‐phase polymer‐based retention technique under different experimental conditions. The investigated metal ions were Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Cr³⁺, and these were studied at pHs 3, 5, and 7. P(AGA‐co‐APSA) showed efficient retention of all metal ions at the pHs studied, with a minimum of 60% for Co(II) at pH 3 and a maximum close to 100% at pH 7 for all metal ions. The maximum retention capacity (n metal ion/n polymer) ranged from 0.22 for Cd²⁺ to 0.34 for Ag⁺. The antibacterial activity of Ag⁺, Cu²⁺, Zn²⁺, and Cd²⁺ polymer–metal complexes was studied, and P(AGA‐co‐APSA)–Cd²⁺ presented selective antibacterial activity for Staphylococcus aureus with a minimum inhibitory concentration of 2 μg/mL. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Behavior of acrylic acid–itaconic acid hydrogels in swelling,shrinking, and uptakes of some metal ions from aqueous solution

An experimental research of the absorption properties of metal ions onto synthetic hydrogel obtained by solution polymerization of acrylic acid and itaconic acid in presence of N,N′‐methylenebisacrylamide as crosslinking agent was carried out. The swelling behavior in aqueous salt solutions was studied as a function of divalent cation concentration (Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, Hg²⁺) in the external solution ranging from 10^?5 to 1M, at 25°C. The ability of these hydrogels to bind cations was measured at different pH values and metal ion concentrations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 530–536, 2003