Facile Photo‐Crosslinking of Azide‐Containing Hole‐Transporting Polymers for Highly Efficient,Solution‐Processed,Multilayer Organic Light Emitting Devices

A novel framework of azide containing photo‐crosslinkable, conducting copolymer, that is, poly(azido‐styrene)‐random‐poly(triphenylamine) (X‐PTPA), is reported as a hole‐transporting material for efficient solution‐processed, multi‐layer, organic light emitting diodes (OLEDs). A facile and energy‐efficient crosslinking process is demonstrated with UV irradiation (254 nm, 2 mW/cm²) at a short exposure time (5 min). By careful design of X‐PTPA, in which 5 mol% of the photo‐crosslinkable poly(azido‐styrene) is copolymerized with hole‐transporting poly(triphenylamine) (X‐PTPA‐5), the adverse effect of the crosslinking of azide moieties is prevented to maximize the performances of X‐PTPA‐5. Since the photo‐crosslinking chemistry of azide molecules does not involve any photo‐initiators, superior hole‐transporting ability is achieved, producing efficient devices. To evaluate the performances of X‐PTPA‐5 as a hole‐transporting/electron‐blocking layer, Ir(ppy)₃‐based, solution‐processable OLEDs are fabricated. The results show high EQE (11.8%), luminous efficiency (43.7 cd/A), and power efficiency (10.4 lm/W), which represent about twofold enhancement over the control device without X‐PTPA‐5 film. Furthermore, micro‐patterned OLEDs with the photo‐crosslinkable X‐PTPA‐5 can be fabricated through standard photolithography. The versatility of this approach is also demonstrated by introducing the same azide moiety into other hole‐transporting materials such as poly(carbazole) (X‐PBC).     

Highly Efficient Hole Injection Using Polymeric Anode Materials for Small‐Molecule Organic Light‐Emitting Diodes

A novel, highly efficient hole injection material based on a conducting polymer polythienothiophene (PTT) doped with poly(perfluoroethylene‐perfluoroethersulfonic acid) (PFFSA) in organic light‐emitting diodes (OLEDs) is demonstrated. Both current–voltage and dark‐injection‐current transient data of hole‐only devices demonstrate high hole‐injection efficiency employing PTT:PFFSA polymers with different organic charge‐transporting materials used in fluorescent and phosphorescent organic light‐emitting diodes. It is further demonstrated that PTT:PFFSA polymer formulations applied as the hole injection layer (HIL) in OLEDs reduce operating voltages and increase brightness significantly. Hole injection from PTT:PFFSA is found to be much more efficient than from typical small molecule HILs such as copper phthalocyanine (CuPc) or polymer HILs such as polyethylene dioxythiophene: polystyrene sulfonate (PEDOT‐PSS). OLED devices employing PTT:PFFSA polymer also demonstrate significantly longer lifetime and more stable operating voltages compared to devices using CuPc.     

Spin‐Coated Highly Efficient Phosphorescent Organic Light‐Emitting Diodes Based on Bipolar Triphenylamine‐Benzimidazole Derivatives

A new series of star‐shaped bipolar host molecules, tris(4′‐(1‐phenyl‐1H‐benzimidazol‐2‐yl)biphen‐yl‐4‐yl) amine (TIBN), tris(2′‐methyl‐4′‐(1‐phenyl‐1H‐benzimida zol‐2‐yl)biphenyl‐4‐yl)amine (Me‐TIBN), and tris(2,2′‐dimethyl‐4′‐(1‐phenyl‐1H‐benzimidazol‐2‐yl)biphenyl‐4‐yl)amine (DM‐TIBN), that contain hole‐transporting triphenylamine and electron‐transporting benzimidazole moieties are designed based on calculations using density functional theory and successfully prepared. The theoretical calculation of energy levels of TIBN derivatives affords helpful ideas to design molecules with a favorable localization of highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) levels and a predefined enhancement of the triplet energy gap. The TIBN derivatives are employed as hosts to fabricate phosphorescent organic light‐emitting diodes (OLEDs) by the two methods of spin‐coating and vacuum deposition. Notably, the spin‐coated Me‐TIBN and DM‐TIBN devices exhibit a much better performance than the vacuum‐deposited ones, in which the spin‐coated DM‐TIBN device (47 500 cd m^?2, 27.3 cd A^?1, 7.3 lm W^?1) is outstanding with respect to other seminal work for solution‐processed OLEDs. More importantly, the new concept of localizing HOMO and LUMO levels for bipolar molecules is illustrated, and a facile strategy to tailor the energy levels by breaking the conjugation of hole‐ and electron‐transporting moieties is demonstrated.     

Solution‐Processible Multi‐component Cyclometalated Iridium Phosphors for High‐Efficiency Orange‐Emitting OLEDs and Their Potential Use as White Light Sources

The synthesis and photophysical studies of several multifunctional phosphorescent iridium(III) cyclometalated complexes consisting of the hole‐transporting carbazole and fluorene‐based 2‐phenylpyridine moieties are reported. All of them are isolated as thermally and morphological stable amorphous solids. Extension of the π‐conjugation through incorporation of electron‐pushing carbazole units to the fluorene fragment leads to bathochromic shifts in the emission profile, increases the highest occupied molecular orbital levels and improves the charge balance in the resulting complexes because of the propensity of the carbazole unit to facilitate hole transport. These iridium‐based triplet emitters give a strong orange phosphorescence light at room temperature with relatively short lifetimes in the solution phase. The photo‐ and electroluminescence properties of these phosphorescent carbazolylfluorene‐functionalized metalated complexes have been studied in terms of the coordinating position of carbazole to the fluorene unit. Organic light‐emitting diodes (OLEDs) using these complexes as the solution‐processed emissive layers have been fabricated which show very high efficiencies even without the need for the typical hole‐transporting layer. These orange‐emitting devices can produce a maximum current efficiency of ～ 30 cd A^–1 corresponding to an external quantum efficiency of ～ 10 % ph/el (photons per electron) and a power efficiency of ～ 14 lm W^–1. The homoleptic iridium phosphors generally outperform the heteroleptic counterparts in device performance. The potential of exploiting these orange phosphor dyes in the realization of white OLEDs is also discussed.     

Solution‐Processable Hole‐Generation Layer and Electron‐Transporting Layer: Towards High‐Performance,Alternating‐Current‐Driven,Field‐Induced Polymer Electroluminescent Devices

The effect of solution‐processed p‐type doping of hole‐generation layers (HGLs) and electron‐transporting layer (ETLs) are systematically investigated on the performance of solution‐processable alternating current (AC) field‐induced polymer EL (FIPEL) devices in terms of hole‐generation capability of HGLs and electron‐transporting characteristics of ETLs. A variety of p‐type doping conjugated polymers and a series of solution‐processed electron‐transporting small molecules are employed. It is found that the free hole density in p‐type doping HGLs and electron mobility of solution‐processed ETLs are directly related to the device performance, and that the hole‐transporting characteristics of ETLs also play an important role since holes need to be injected from electrode through ETLs to refill the depleted HGLs in the positive half of the AC cycle. As a result, the best FIPEL device exhibits exceptional performance: a low turn‐on voltage of 12 V, a maximum luminance of 20 500 cd m^?2, a maximum current and power efficiency of 110.7 cd A^?1 and 29.3 lm W^?1. To the best of the authors' knowledge, this is the highest report to date among FIPEL devices driven by AC voltage.     

High‐Performance Quantum‐Dot Light‐Emitting Diodes Using NiOx Hole‐Injection Layers with a High and Stable Work Function

Solution‐processed oxide thin films are actively pursued as hole‐injection layers (HILs) in quantum‐dot light‐emitting diodes (QLEDs), aiming to improve operational stability. However, device performance is largely limited by inefficient hole injection at the interfaces of the oxide HILs and high‐ionization‐potential organic hole‐transporting layers. Solution‐processed NiO_x films with a high and stable work function of ≈5.7 eV achieved by a simple and facile surface‐modification strategy are presented. QLEDs based on the surface‐modified NiO_x HILs show driving voltages of 2.1 and 3.3 V to reach 1000 and 10 000 cd m^?2, respectively, both of which are the lowest among all solution‐processed LEDs and vacuum‐deposited OLEDs. The device exhibits a T₉₅ operational lifetime of ≈2500 h at an initial brightness of 1000 cd m^?2, meeting the commercialization requirements for display applications. The results highlight the potential of solution‐processed oxide HILs for achieving efficient‐driven and long‐lifetime QLEDs.     

The Root Causes of the Limited Stability of Solution‐Coated Small‐Molecule Organic Light‐Emitting Devices: Faster Host Aggregation by Exciton–Polaron Interactions

The degradation mechanism is compared in organic light‐emitting devices (OLEDs) fabricated by solution‐coating to that in vacuum‐deposited OLEDs. Devices comprising various host materials made by vacuum‐deposition or solution‐coating are investigated. Changes in devices electroluminescence (EL) spectra during prolonged electrical driving are compared and analyzed. Hole‐only devices are also utilized, and employed to study the effects of charges and excitons, separately and combined. The results reveal that the faster degradation of solution‐processed devices relative to their vacuum‐deposited counterparts under electrical stress is due to a faster aggregation of the host materials. Interactions between excitons and polarons in the emitting layers of the devices induce this aggregation phenomenon. Although this phenomenon affects both vacuum‐deposited and solution‐coated emitting layers, it is found to occur much faster in the later. The findings shed light on the root causes of the limited stability of solution‐processed OLEDs.     

Solution‐Processed,Alkali Metal‐Salt‐Doped,Electron‐Transport Layers for High‐Performance Phosphorescent Organic Light‐Emitting Diodes

High‐performance, blue, phosphorescent organic light‐emitting diodes (PhOLEDs) are achieved by orthogonal solution‐processing of small‐molecule electron‐transport material doped with an alkali metal salt, including cesium carbonate (Cs₂CO₃) or lithium carbonate (Li₂CO₃). Blue PhOLEDs with solution‐processed 4,7‐diphenyl‐1,10‐phenanthroline (BPhen) electron‐transport layer (ETL) doped with Cs₂CO₃ show a luminous efficiency (LE) of 35.1 cd A^?1 with an external quantum efficiency (EQE) of 17.9%, which are two‐fold higher efficiency than a BPhen ETL without a dopant. These solution‐processed blue PhOLEDs are much superior compared to devices with vacuum‐deposited BPhen ETL/alkali metal salt cathode interfacial layer. Blue PhOLEDs with solution‐processed 1,3,5‐tris(m‐pyrid‐3‐yl‐phenyl)benzene (TmPyPB) ETL doped with Cs₂CO₃ have a luminous efficiency of 37.7 cd A^?1 with an EQE of 19.0%, which is the best performance observed to date in all‐solution‐processed blue PhOLEDs. The results show that a small‐molecule ETL doped with alkali metal salt can be realized by solution‐processing to enhance overall device performance. The solution‐processed metal salt‐doped ETLs exhibit a unique rough surface morphology that facilitates enhanced charge‐injection and transport in the devices. These results demonstrate that orthogonal solution‐processing of metal salt‐doped electron‐transport materials is a promising strategy for applications in various solution‐processed multilayered organic electronic devices.     

Unexpected Propeller‐Like Hexakis(fluoren‐2‐yl)benzene Cores for Six‐Arm Star‐Shaped Oligofluorenes: Highly Efficient Deep‐Blue Fluorescent Emitters and Good Hole‐Transporting Materials

Grafting six fluorene units to a benzene ring generates a new highly twisted core of hexakis(fluoren‐2‐yl)benzene. Based on the new core, six‐arm star‐shaped oligofluorenes from the first generation T1 to third generation T3 are constructed. Their thermal, photophysical, and electrochemical properties are studied, and the relationship between the structures and properties is discussed. Simple double‐layer electroluminescence (EL) devices using T1–T3 as non‐doped solution‐processed emitters display deep‐blue emissions with Commission Internationale de l'Eclairage (CIE) coordinates of (0.17, 0.08) for T1 , (0.16, 0.08) for T2 , and (0.16, 0.07) for T3 . These devices exhibit excellent performance, with maximum current efficiency of up to 5.4 cd A^?1, and maximum external quantum efficiency of up to 6.8%, which is the highest efficiency for non‐doped solution‐processed deep‐blue organic light‐emitting diodes (OLEDs) based on starburst oligofluorenes, and is even comparable with other solution‐processed deep‐blue fluorescent OLEDs. Furthermore, T2‐ and T3‐ based devices show striking blue EL color stability independent of driving voltage. In addition, using T0–T3 as hole‐transporting materials, the devices of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS)/ T0–T3 /tris(8‐hydroxyquinolinato)aluminium (Alq₃)/LiF/Al achieve maximum current efficiencies of 5.51–6.62 cd A^?1, which are among the highest for hole‐transporting materials in identical device structure.     

Crosslinkable TAPC‐Based Hole‐Transport Materials for Solution‐Processed Organic Light‐Emitting Diodes with Reduced Efficiency Roll‐Off

1‐Bis[4‐[N,N‐di(4‐tolyl)amino]phenyl]‐cyclohexane (TAPC) has been widely used in xerography and organic light‐emitting diodes (OLEDs), but derivatives are little known. Here, a new series of solution‐processable, crosslinkable hole conductors based on TAPC with varying highest occupied molecular orbital (HOMO) energies from ?5.23 eV to ?5.69 eV is implemented in blue phosphorescent OLEDs. Their superior perfomance compared with the well‐known N4,N4,N4′,N4′‐tetraphenylbiphenyl‐4,4′‐diamine (TPDs) analogues regarding hole‐injection and mobility, electron and exciton blocking capabilities, efficiency, and efficiency roll‐off is demonstrated. Overall, the TAPC‐based devices feature higher luminous and power efficiency over a broader range of brightness levels and reduced efficiency roll off. A systematic broadening of the emission zone is observed as the hole‐injection barrier between the anode and the hole‐transporting layer increased.     

An Indolocarbazole‐Based Thermally Activated Delayed Fluorescence Host for Solution‐Processed Phosphorescent Tandem Organic Light‐Emitting Devices Exhibiting Extremely Small Efficiency Roll‐Off

The study reports the development of a solution‐processed phosphorescent tandem organic light‐emitting device (OLED) exhibiting extremely small efficiency roll‐off. The OLED comprises two light‐emitting units (LEUs) connected by an interconnecting unit and employs a thermally activated delayed fluorescence host material. One of the most difficult tasks in the fabrication of OLEDs is to form a multilayer structure without dissolving the underlayer during the coating of the upper layer. The developed host materials exhibit high tolerance to methanol. The upper‐layer adjacent to the light‐emitting layer consists of ZnO nanoparticles, which could be dispersed in methanol by improving the preparation method. This results in the successful fabrication of a solution‐processed phosphorescent tandem OLED comprising two LEUs. The maximum external quantum efficiency (EQE) of the tandem device is 22.8%, and the EQE is 21.9% even at a high luminance of 10 000 cd m^?2. The suppression of efficiency roll‐off is among the best of those previously reported. Moreover, the operational stability of the tandem device is much higher compared with single‐LEU devices.     

Water‐Soluble Lacunary Polyoxometalates with Excellent Electron Mobilities and Hole Blocking Capabilities for High Efficiency Fluorescent and Phosphorescent Organic Light Emitting Diodes

High performance solution‐processed fluorescent and phosphorescent organic light emitting diodes (OLEDs) are achieved by water solution processing of lacunary polyoxometalates used as novel electron injection/transport materials with excellent electron mobilities and hole blocking capabilities. Green fluorescent OLEDs using poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐(1,4‐benzo‐{2,1′,3}‐thiadiazole)] (F8BT) as the emissive layer and our polyoxometalates as electron transport/hole blocking layers give a luminous efficiency up to 6.7 lm W^?1 and a current efficiency up to 14.0 cd A^?1 which remained nearly stable for about 500 h of operation. In addition, blue phosphorescent OLEDs (PHOLEDs) using poly(9‐vinylcarbazole) (PVK):1,3‐bis[2‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazo‐5‐yl]benzene (OXD‐7) as a host and 10.0 wt% FIrpic as the blue dopant in the emissive layer and a polyoxometalate as electron transport material give 12.5 lm W^?1 and 30.0 cd A^?1 power and luminous efficiency, respectively, which are among the best performance values observed to date for all‐solution processed blue PHOLEDs. The lacunary polyoxometalates exhibit unique properties such as low electron affinity and high ionization energy (of about 3.0 and 7.5 eV, respectively) which render them as efficient electron injection/hole blocking layers and, most importantly, exceptionally high electron mobility of up to 10^?2 cm² V^?1 s^?1.     

Creation of Bifunctional Materials: Improve Electron‐Transporting Ability of Light Emitters Based on AIE‐Active 2,3,4,5‐Tetraphenylsiloles

2,3,4,5‐Tetraphenylsiloles are excellent solid‐state light emitters featured aggregation‐induced emission (AIE) characteristics, but those that can efficiently function as both light‐emitting and electron‐transporting layers in one organic light‐emitting diode (OLED) are much rare. To address this issue, herein, three tailored n‐type light emitters comprised of 2,3,4,5‐tetraphenylsilole and dimesitylboryl functional groups are designed and synthesized. The new siloles are fully characterized by standard spectroscopic and crystallographic methods with satisfactory results. Their thermal stabilities, electronic structures, photophysical properties, electrochemical behaviors and applications in OLEDs are investigated. These new siloles exhibit AIE characteristics with high emission efficiencies in solid films, and possess lower LUMO energy levels than their parents, 2,3,4,5‐tetraphenylsiloles. The double‐layer OLEDs [ITO/NPB (60 nm)/silole (60 nm)/LiF (1 nm)/Al (100 nm)] fabricated by adopting the new siloles as both light emitter and electron transporter afford excellent performances, with high electroluminescence efficiencies up to 13.9 cd A^–1, 4.35% and 11.6 lm W^–1, which are increased greatly relative to those attained from the triple‐layer devices with an additional electron‐transporting layer. These results demonstrate effective access to n‐type solid‐state emissive materials with practical utility.     

Binaphthyl‐Containing Green‐ and Red‐Emitting Molecules for Solution‐Processable Organic Light‐Emitting Diodes

Strong intermolecular interactions usually result in decreases in solubility and fluorescence efficiency of organic molecules. Therefore, amorphous materials are highly pursued when designing solution‐processable, electroluminescent organic molecules. In this paper, a non‐planar binaphthyl moiety is presented as a way of reducing intermolecular interactions and four binaphthyl‐containing molecules ( BNCM s): green‐emitting BBB and TBT as well as red‐emitting BTBTB and TBBBT , are designed and synthesized. The photophysical and electrochemical properties of the molecules are systematically investigated and it is found that TBT , TBBBT , and BTBTB solutions show high photoluminescence (PL) quantum efficiencies of 0.41, 0.54, and 0.48, respectively. Based on the good solubility and amorphous film‐forming ability of the synthesized BNCM s, double‐layer structured organic light‐emitting diodes (OLEDs) with BNCM s as emitting layer and poly(N‐vinylcarbazole) (PVK) or a blend of poly[N,N′‐bis(4‐butylphenyl)‐N,N′‐bis(phenyl)benzidine] and PVK as hole‐transporting layer are fabricated by a simple solution spin‐coating procedure. Amongst those, the BTBTB based OLED, for example, reaches a high maximum luminance of 8315 cd · m⁻² and a maximum luminous efficiency of 1.95 cd · A⁻¹ at a low turn‐on voltage of 2.2 V. This is one of the best performances of a spin‐coated OLED reported so far. In addition, by doping the green and red BNCM s into a blue‐emitting host material poly(9,9‐dioctylfluorene‐2,7‐diyl) high performance white light‐emitting diodes with pure white light emission and a maximum luminance of 4000 cd · m⁻² are realized.     

Investigation of TDAPBs as hole‐transporting materials for organic light‐emitting devices (OLEDs)

The performance of organic light‐emitting devices (OLEDs) is strongly influenced by the electronic properties of the employed materials. In order to determine the effect of these materials' parameters, several different hole‐transporting 1,3,5‐tris(4‐diphenylaminophenyl)benzenes (TDAPBs) were synthesised. These TDAPBs contained different substituents, different numbers of substituents and different positions of theses substituents. For the evaluation of the electronic properties, cyclic voltammetry was employed in order to determine the HOMO values, and time‐of‐flight (TOF) measurements to obtain the hole mobilities. OLEDs were prepared consisting of the TDAPBs blended in a polymer matrix, and of Alq₃ as electron‐conducting and light‐emitting layer. These devices were investigated regarding their current density/voltage characteristics, efficiencies, onset voltages for electroluminescence, and lifetimes. For hole‐transporting blend systems an exponential relationship between the current density and the HOMO levels of the TDAPBs was found. However, even though the HOMO values cover a range from −5.09 to −5.35 eV, no effects on the performance of the OLEDs were detected for electroluminescent two‐layer systems. In this case the initial voltage seems to be a determining parameter for the behaviour of the devices during operation. Copyright © 1999 John Wiley & Sons, Ltd.     

Inkjet deposition of a hole-transporting small molecule to realize a hybrid solution-evaporation green top-emitting OLED

The QUPD molecule has been deposited by inkjet printing as a hole-transport layer in top-emitting green OLEDs. A systematic study of the QUPD-based ink formulation has been done and different solvent mixtures have been investigated, in order to find the best composition (QUPD in toluene/IPA/anisole, 8/1/1 v/v/v) leading to the best film forming properties. Spin-coated PEDOT-PSS has been used as hole injecting layer. Subsequent layers have been deposited by vacuum sublimation. The resulting hybrid, solution-sublimation, OLEDs have been encapsulated by atomic layer deposition using Al₂O₃ material. In order to overcome the issue related to the thickness control of the organic layers deposited from solution, second order cavity length OLEDs have been fabricated by modifying the n-doped electron transport layer thickness. In that case, the relative OLED efficiency variation (10.5%) due to the thickness variation is far less compared to first order cavity length (34%) allowing a better reproducibility of the OLED fabrication. In the end, high efficiency (18 lm/W) green OLEDs of two different sizes, 0.44 cm² and 4 cm², have been fabricated, using an inkjet printed QUPD layer as hole transporting layer.     

Solution‐Processed Organic Light‐Emitting Transistors Incorporating Conjugated Polyelectrolytes

Improved performance of p‐type organic light‐emitting transistors (OLETs) is demonstrated by introducing a conjugated polyelectrolyte (CPE) layer and symmetric high work function (WF) source and drain metal electrodes. The OLET comprises a tri‐layer film consisting of a hole transporting layer, an emissive layer, and a CPE layer as an electron injection layer. The thickness of the CPE layer is critical for achieving good performance and provides an important structural handle for consideration in future optimization studies. We also demonstrate for the first time, good performance solution‐processed blue‐emitting OLETs. These results further demonstrate the simplification of device fabrication and improved performance afforded by integrating CPE interlayers into organic optoelectronic devices.     

Multifunctional Crosslinkable Iridium Complexes as Hole Transporting/Electron Blocking and Emitting Materials for Solution‐Processed Multilayer Organic Light‐Emitting Diodes

Here, a new series of crosslinkable heteroleptic iridium (III) complexes for use in solution processed phosphorescent organic light emitting diodes (OLEDs) is reported. These iridium compounds have the general formula of (PPZ‐VB)₂Ir(CˆN), where PPZ‐VB is phenylpyrazole (PPZ) vinyl benzyl (VB) ether; and the CˆN ligands represent a family of four different cyclometallating ligands including 1‐phenylpyrazolyl (PPZ) (1), 2‐(4,6‐difluorophenyl)pyridyl (DFPPY) (2), 2‐(p‐tolyl)pyridyl (TPY) (3), and 2‐phenylquinolyl (PQ) (4). With the incorporation of two crosslinkable VB ether groups, these compounds can be fully crosslinked after heating at 180 °C for 30 min. The crosslinked films exhibit excellent solvent resistance and film smoothness which enables fabrication of high‐performance multilayer OLEDs by sequential solution processing of multiple layers. Furthermore, the photophysical properties of these compounds can be easily controlled by simply changing the cyclometallating CˆN ligand in order to tune the triplet energy within the range of 3.0–2.2 eV. This diversity makes these materials not only suitable for use in hole transporting and electron blocking but also as emissive layers of several colors. Therefore, these compounds are applied as effective materials for all‐solution processed OLEDs with (PPZ‐VB)₂IrPPZ (1) acting as hole transporting and electron blocking layer and host material, as well as three other compounds, (PPZ‐VB)₂IrDFPPY ( 2 ), (PPZ‐VB)₂IrTPY(3), and (PPZ‐VB)₂IrPQ( 4 ), used as crosslinkable phosphorescent emitters.     

Study of Configuration Differentia and Highly Efficient,Deep‐Blue,Organic Light‐Emitting Diodes Based on Novel Naphtho[1,2‐d]imidazole Derivatives

Two novel naphtho[1,2‐d]imidazole derivatives are developed as deep‐blue, light‐emitting materials for organic light‐emitting diodes (OLEDs). The 1H‐naphtho[1,2‐d]imidazole based compounds exhibit a significantly superior performance than the 3H‐naphtho[1,2‐d]imidazole analogues in the single‐layer devices. This is because they have a much higher capacity for direct electron‐injection from the cathode compared to their isomeric counterparts resulting in a ground‐breaking EQE (external quantum efficiency) of 4.37% and a low turn‐on voltage of 2.7 V, and this is hitherto the best performance for a non‐doped single‐layer fluorescent OLED. Multi‐layer devices consisting of both hole‐ and electron‐transporting layers, result in identically excellent performances with EQE values of 4.12–6.08% and deep‐blue light emission (Commission Internationale de l'Eclairage (CIE) y values of 0.077–0.115) is obtained for both isomers due to the improved carrier injection and confinement within the emissive layer. In addition, they showed a significantly better blue‐color purity than analogous molecules based on benzimidazole or phenanthro[9,10‐d]imidazole segments.     

Highly Efficient Green‐Emitting Phosphorescent Iridium Dendrimers Based on Carbazole Dendrons

Green‐emitting iridium dendrimers with rigid hole‐transporting carbazole dendrons are designed, synthesized, and investigated. With second‐generation dendrons, the photoluminescence quantum yield of the dendrimers is up to 87 % in solution and 45 % in a film. High‐quality films of the dendrimers are fabricated by spin‐coating, producing highly efficient, non‐doped electrophosphorescent organic light‐emitting diodes (OLEDs). With a device structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/neat dendrimer/1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene/LiF/Al, a maximum external quantum efficiency (EQE) of 10.3 % and a maximum luminous efficiency of 34.7 cd A^–1 are realized. By doping the dendrimers into a carbazole‐based host, the maximum EQE can be further increased to 16.6 %. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable dendrimers for OLED applications.