Preparation of cibacron blue F3GA‐attached polyamide hollow fibers for heavy metal removal

Dye‐affinity adsorption has been used increasingly for heavy metal removal. Synthetic hollow fibers have advantages as support matrices in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The goal of this study was to investigate in detail the performance of hollow fibers composed of modified polyamide to which Cibacron Blue F3GA was attached for the removal of heavy metal ions. The Cibacron Blue F3GA loading was 1.2 mmol/g. The internal matrix was characterized by scanning electron microscopy. No significant changes in the hollow fiber cross‐section or outer layer morphology were observed after dye modification. The effect of the initial concentration of heavy metal ions and medium pH on the adsorption efficiency were studied in a batch reactor. The adsorption capacity of the hollow fibers for the selected metal ions [i.e., Cu(II), Zn(II) and Ni(II)] were investigated in aqueous media with different amounts of these ions (10–400 ppm) and at different pH values (3.0–7.0). The maximum adsorptions of metal ions onto the Cibacron Blue F3GA‐attached hollow fibers were 246.2 mg/g for Cu(II), 133.6 mg/g for Zn(II), and 332.7 mg/g for Ni(II). Furthermore, a Langmuir expression was calculated to extend the adsorption equilibrium. Nitric acid (0.1M) was chosen as the desorption solution. High desorption ratios (up to 97%) were observed in all cases. Consecutive adsorption/desorption operations showed the feasibility of repeated use of this novel sorbent system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3089–3098, 2002; DOI 10.1002/app.2338     

Cibacron Blue F3GA‐attached magnetic poly(2‐hydroxyethyl methacrylate) beads for human serum albumin adsorption

An affinity dye ligand, Cibacron Blue F3GA, was covalently attached onto magnetic poly(2‐hydroxyethyl methacrylate) (mPHEMA) beads for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. The mPHEMA beads, in the size range of 80 to 120 µm, were prepared by a modified suspension technique. Cibacron Blue F3GA molecules were incorporated on to the mPHEMA beads. The maximum amount of Cibacron Blue F3GA attachment was obtained as 68.3 µmol g^?1. HSA adsorption onto unmodified and Cibacron Blue F3GA‐attached mPHEMA beads was investigated batchwise. The non‐specific adsorption of HSA was very low (1.8 mg g^?1). Cibacron Blue F3GA attachment onto the beads significantly increased the HSA adsorption (94.5 mg g^?1). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (138.3 mg HSA g^?1). Desorption of HSA from Cibacron Blue F3GA‐attached mPHEMA beads was obtained by using 0.1 M Tris/HCl buffer containing 0.5 M NaSCN. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to re‐use Cibacron Blue F3GA‐attached mPHEMA beads without any significant decreases in their adsorption capacities. Copyright © 2004 Society of Chemical Industry     

Poly(acrylamide‐allyl glycidyl ether) cryogel as a novel stationary phase in dye‐affinity chromatography

Poly(acrylamide‐allyl glycidyl ether) [poly(AAm‐AGE)] cryogel was prepared by bulk polymerization which proceeds in an aqueous solution of monomers frozen inside a glass column (cryo‐polymerization). After thawing, the monolithic cryogel contains a continuous polymeric matrix having interconnected pores of 10–100 μm size. Cibacron Blue F3GA was immobilized by covalent binding onto poly(AAm‐AGE) cryogel via epoxy groups. Poly(AAm‐AGE) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(AAm‐AGE) monolithic cryogel was 6.84 g H₂O/g cryogel. Poly(AAm‐AGE) cryogel containing 68.9 μmol Cibacron Blue F3GA/g was used in the adsorption/desorption of human serum albumin (HSA) from aqueous solutions and human plasma. The nonspecific adsorption of HSA was very low (0.2 mg/g). The maximum amount of HSA adsorption from aqueous solution in acetate buffer was 27 mg/g at pH 5.0. Higher HSA adsorption value was obtained from human plasma (up to 74.2 mg/g). Desorption of HSA with a purity of 92% from Cibacron Blue F3GA attached poly(AAm‐AGE) cryogel was achieved using 0.1M Tris/HCl buffer containing 0.5M NaCl. It was observed that HSA could be repeatedly adsorbed and desorbed with poly(AAm‐AGE) cryogel without significant loss in the adsorption capacity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Nonporous monosize polymeric sorbents: Dye and metal chelate affinity separation of lysozyme

Lysozyme adsorption onto dye‐attached nonporous monosize poly(2‐hydroxyethyl‐methacrylate‐methylmethacrylate) [poly(HEMA‐MMA)] microspheres was investigated. Poly(HEMA‐MMA) microspheres were prepared by dispersion polymerization. The monochloro‐triazine dye, Cibacron Blue F3GA, was immobilized covalently as dye–ligand. These dye‐affinity microspheres were used in the lysozyme adsorption–desorption studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached and metal‐chelated microspheres were studied in a batch reactor. Effect of Cu(II) chelation on lysozyme adsorption was also studied. The nonspecific adsorption of lysozyme on the poly(HEMA‐MMA) microspheres was 3.6 mg/g. Cibacron Blue F3GA attachment significantly increased the lysozyme adsorption up to 247.8 mg/g. Lysozyme adsorption capacity of the Cu(II) incorporated microspheres (318.9 mg/g) was greater than that of the Cibacron Blue F3GA‐attached microspheres. Significant amount of the adsorbed lysozyme (up to 97%) was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. In order to examine the effects of separation conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We conclude that dye‐ and metal‐chelate affinity chromatography with poly(HEMA‐MMA) microspheres can be applied for lysozyme separation without causing any significant changes and denaturation. Repeated adsorption/desorption processes showed that these novel dye‐attached monosize microspheres are suitable for lysozyme adsorption. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 115–124, 2000     

Affinity microspheres and their application to lysozyme adsorption: Cibacron Blue F3GA and Cu(II) with poly(HEMA-EGDMA)

Lysozyme adsorption onto Cibacron Blue F3GA attached and Cu(II) incorporated poly(2-hydroxyethyl methacrylate–ethylene glycol dimethacrylate) [poly(HEMA-EGDMA)] microspheres was investigated. The microspheres were prepared by suspension polymerization. Various amounts of Cibacron Blue F3GA were attached covalently onto the microspheres by changing the initial concentration of dye in the reaction medium. The microspheres with a swelling ratio of 65%, and carrying different amounts of dye (between 1.4 and 22.5 µmol/g⁻¹) were used in the lysozyme adsorption studies. Lysozyme adsorption on these microspheres from aqueous solutions containing different amounts of lysozyme at different pH values was investigated in batch reactors. The lysozyme adsorption capacity of the dye–metal chelated microspheres (238.2 mg g⁻¹) was greater than that of the dye-attached microspheres (175.1 mg g⁻¹). The maximum lyzozyme adsorption capacities (q_m) and the dissociation constant (k_d) values were found to be 204.9 mg g⁻¹ and 0.0715 mg ml⁻¹ with dye-attached and 270.7 mg g⁻¹ and 0.0583 mg ml⁻¹ with dye–metal chelated microspheres, respectively. More than 90% of the adsorbed lysozyme were desorbed in 60 min in the desorption medium containing 0.5 M KSCN at pH 8.0 or 25 mM EDTA at pH 4.9. © 1999 Society of Chemical Industry     

New metal chelate sorbent for albumin adsorption: Cibacron Blue F3GA-Zn(II) attached microporous poly(HEMA) membranes

Poly(2-hydroxyethyl methacrylate) [poly(HEMA)] membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azobis-isobutyronitrile, AIBN). The triazine dye Cibacron Blue F3GA was attached as an affinity ligand to poly(HEMA) membranes, covalently. These affinity membranes with a swelling ratio of 58% and containing 10.7 mmol Cibacron Blue F3GA/m² were used in the albumin adsorption studies. After dye-attachment, Zn(II) ions were chelated within the membranes via attached-dye molecules. Different amounts of Zn(II) ions [650–1440 mg Zn(II)/m²] were loaded on the membranes by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these membranes from aqueous solutions containing different amounts of BSA at different pH was investigated in batch reactors. The nonspecific adsorption of BSA on the poly(HEMA) membranes was negligible. Cibacron Blue F3GA attachment significantly increased the BSA adsorption up to 92.1 mg BSA/m². Adsorption capacity was further increased when Zn(II) ions were attached (up to 144.8 mg BSA m²). More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 0.5M NaSCN at pH 8.0 and 0.025M EDTA at pH 4.9. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 657–664, 1998     

Dye‐ligand column chromatography: Albumin adsorption from aqueous media and human plasma with dye‐affinity microbeads

Cibacron Blue F3GA was covalently coupled with poly(ethylene glycol‐dimethacrylate‐2‐hydroxyethylmethacrylate) [poly(EGDMA‐HEMA)] microbeads via the nucleophilic substitution reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA molecules under alkaline conditions. The affinity sorbent carrying 16.5 μmol Cibacron Blue F3GA/g polymer was then used for bovine serum albumin (BSA) adsorption from aqueous protein solutions and from human plasma in a packed‐bed column. The BSA adsorption capacity of the microbeads decreased with an increase in the recirculation rate. High adsorption rates were observed at the beginning, then equilibrium was gradually achieved in about 60 min. The BSA concentration in the mobile phase was also effective on adsorption. BSA adsorption was first increased with BSA concentration, then reached a plateau that was about 57.3 mg BSA/g. Higher BSA adsorption was observed at lower ionic strength. The maximum adsorption was observed at pH 5.0, which is the isoelectric pH of BSA. Higher human serum albumin adsorption was achieved from human plasma (109.6 mg HSA/g). High desorption ratios (over 94% of the adsorbed albumin) were achieved by using 1.0M NaSCN (pH 8.0) in 30 min. It was observed that albumin could be repeatedly adsorbed and desorbed without a significant loss in adsorption capacity. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2803–2810, 1999     

Human serum albumin (HSA) adsorption with chitosan microspheres

In this study, chitosan microspheres were prepared and characterized for adsorption of human serum albumin (HSA) as affinity sorbent. The chitosan microspheres were obtained with a “suspension crosslinking technique” in the size range of 30–700 μm by using a crosslinker, i.e., glutaraldehyde. The chitosan microspheres used in HSA adsorption studies were having the average size of 170 ± 81 μm. Adsorption medium pH and the initial HSA concentration in the adsorption medium were changed as 4.0–7.0 and 0.5–2.0 mg HSA/mL, respectively, to investigate the HSA adsorption capacity of chitosan microspheres. Maximum HSA adsorption (i.e., 11.35 mg HSA/g chitosan microspheres) was obtained at pH 5.0 and 1.5 mg HSA/mL of the initial HSA concentration in the adsorption medium was obtained as the saturation value for HSA adsorption. A very common dye ligand, i.e., Cibacron Blue F3GA was attached to the chitosan microspheres to increase the HSA adsorption capacity. Actually, the HSA adsorption capacity was increased up to 15.35 mg HSA/g chitosan microspheres in the case of Cibacron Blue F3GA attached to chitosan microspheres used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3035–3039, 2002     

Metal chelating properties of Cibacron Blue F3GA‐derived poly(EGDMA‐HEMA) microbeads

Metal chelating properties of Cibacron Blue F3GA‐derived poly(EGDMA‐HEMA) microbeads have been studied. Poly(EGDMA‐HEMA) microbeads were prepared by suspension copolymerization of ethylene glycol dimethacrylate (EGDMA) and hydroxy‐ethyl methacrylate (HEMA) by using poly(vinyl alcohol), benzoyl peroxide, and toluene as the stabilizer, the initiator, and the pore‐former, respectively. Cibacron Blue F3GA was covalently attached to the microbeads via the nucleophilic substitution reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA, under alkaline conditions. Microbeads (150–200 μm in diameter) with a swelling ratio of 55%, and carrying 16.5 μmol Cibacron Blue F3GA/g polymer were used in the adsorption/desorption studies. Adsorption capacity of the microbeads for the selected metal ions, i.e., Cu(II), Zn(II), Cd(II), Fe(III), and Pb(II) were investigated in aqueous media containing different amounts of these ions (5–200 ppm) and at different pH values (2.0–7.0). The maximum adsorptions of metal ions onto the Cibacron Blue F3GA‐derived microbeads were 0.19 mmol/g for Cu(II), 0.34 mmol/g for Zn(II), 0.40 mmol/g for Cd(II), 0.91 mmol/g for Fe(III), and 1.05 mmol/g for Pb(II). Desorption of metal ions were studied by using 0.1 M HNO₃. High desorption ratios (up to 97%) were observed in all cases. Repeated adsorption/desorption operations showed the feasibility of repeated use of this novel sorbent system. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1397–1403, 1999     

Antibody purification from human plasma by metal‐chelated affinity membranes

The aim of this study is to investigate in detail the feasibility of poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐(L )‐histidine methyl ester), PHEMAH membranes for purification of immunoglobulin G (IgG) from human plasma. PHEMAH membranes were prepared by photo‐polymerization technique. Then, Zn²⁺, Ni²⁺, Co²⁺, and Cu²⁺ ions were chelated directly on the PHEMAH membranes. Elemental analysis assay was performed to determine the nitrogen content and polymerized MAH was calculated as 168.5 μmol/g. The nonspecific IgG adsorption onto the plain PHEMA membranes was negligible (about 0.25 mg/mL). A remarkable increase in the IgG adsorption capacities were achieved from human plasma with PHEMAH membranes (up to 68.4 mg/mL). Further increase was observed with the metal‐chelated PHEMAH membranes (up to 118 mg/mL). The metal‐chelate affinity membranes allowed the one‐step separation of IgG from human plasma. The binding range of metal ions for surface histidines from human plasma followed the order: Cu²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺. Adsorbed IgG was eluted using 250 mM EDTA with a purity of 94.1%. IgG molecules could be repeatedly adsorbed and eluted with the metal‐chelated PHEMAH membranes without noticeable loss in their IgG adsorption capacity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Porous magnetic chelator support for albumin adsorption by immobilized metal affinity separation

Magnetic poly(2‐hydroxyethylmethacrylate) (mPHEMA) beads are modified by iminodiacetic acid (IDA) to implify the reactive groups and subsequent binding of Cu²⁺ ions to form metal chelate. mPHEMA beads, in the size range of 80–120 μm, were produced by a modified suspension polymerization technique. mPHEMA beads were characterized by swelling tests, electron spin resonance (ESR), FTIR, and scanning electron microscopy (SEM). Important results obtained in this study are as follows. The swelling ratio of mPHEMA beads was 34%. The presence of magnetite particles in the polymeric structure was confirmed by ESR. FTIR data confirmed that the magnetic polymer beads were modified with functional groups IDA. The mPHEMA beads have a spherical shape and porous structure. The effect of pH and concentration of human serum albumin (HSA), on the adsorption of HSA to the metal‐chelated magnetic beads, were examined in a batch reactor. Most importantly, the magnetic beads had little nonspecific adsorption for HSA (0.5 mg/g) before introducing IDA groups. Cu²⁺ chelation increased the HSA adsorption up to 28.4 mg/g. Adsorption behavior can be described at least approximately with the Langmuir equation. Regeneration of the metal‐chelated magnetic beads was easily performed with 1.0M NaSCN, pH 8.0, followed by washing with distilled water and reloading with Cu²⁺. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2501–2510, 2004     

Albumin adsorption from aqueous solutions and human plasma in a packed-bed column with Cibacron Blue F3GA-Zn(II) attached poly(EGDMA-HEMA) microbeads

Affinity dye-ligand Cibacron Blue F3GA, was covalently coupled with poly(EGDMA-HEMA) microbeads via nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA under alkaline conditions. The microbeads carrying 16.5 μmol Cibacron Blue F3GA per gram polymer was incorporated with Zn(II) ions. Zn(II) loading was 189.6 μmol/g. Cibacron Blue F3GA-Zn(II) attached affinity sorbent was used for albumin adsorption from aqueous solutions and human plasma in a packed-bed column. BSA adsorption capacity of the microbeads decreased with an increase in the recirculation rate. High adsorption rates were observed at the beginning, then equilibrium was gradually achieved in about 60 min. The BSA concentration in the mobile phase also effected adsorption. BSA adsorption was first increased with BSA concentration, then reached a plateau which was about 128 mg BSA/g. The maximum adsorption was observed at pH 5.0 which is the isoelectric pH of BSA. Higher human serum albumin adsorption was observed from human plasma (215 mg HSA/g). High desorption ratios (over 90% of the adsorbed albumin) were achieved by using 1.0 M NaSCN (pH 8.0) in 30 min.     

Removal of Cd2+, Cu2+, Ni2+, and Pb2+ ions from aqueous solutions using tururi fibers as an adsorbent

This work investigates the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ ions from aqueous solutions using tururi fibers as an adsorbent under both batchwise and fixed‐bed conditions. It was found that modification of the tururi fibers with sodium hydroxide increased the adsorption efficiencies of all metal ions studied. The fractional factorial design showed that pH, adsorbent mass, agitation rate, and initial metal concentration influenced each metal adsorption differently. The kinetics showed that multi‐element adsorption equilibria were reached after 15 min following pseudo‐second‐order kinetics. The Langmuir, Freundlich, and Redlich–Peterson models were used to evaluate the adsorption capacities by tururi fibers. The Langmuir model was found to be suitable for all metal ions. Breakthrough curves revealed that saturation of the bed was reached in 160.0 mL with Cd²⁺ and Cu²⁺, and 52.0 mL with Ni²⁺ and Pb²⁺. The Thomas model was applied to the experimental data of breakthrough curves and represented the data well. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40883.     

Adsorption of Pb2+, Cu2+ and Co2+ by polypropylene fabric and polyethylene hollow fiber modified by radiation-induced graft copolymerization

Cation-exchange adsorbents were prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) fabric and polyethylene (PE) hollow fiber and subsequent phosphonation of epoxy groups of poly(GMA) graft chains. The adsorption characteristics of Pb²⁺, Cu²⁺ and Co²⁺ for the two cation-exchange adsorbents were studied. In the grafting of GMA onto PP fabric, the degree of grafting (%) increased with an increase in reaction time, reaction temperature, and pre-irradiation dose. The maximum grafting yield was observed around 60% GMA concentration. In 50, 130 and 250% GMA-grafted PP fabric, the content of phosphoric acid was 1.52, 3.40 and 4.50 mmol/g at 80 °C in the 85 % phosphoric acid aqueous solution for 24 h, respectively. The adsorption of Pb²⁺, Cu²⁺ and Co²⁺ by PP fabric adsorbent was enhanced with an increased phosphoric acid content The order of adsorption capacity of the PP fabric adsorbent was Pb²⁺>Co²⁺>Cu²⁺. In adsorption of Pb²⁺, Cu²⁺ and Co²⁺ by PE hollow fiber, the amount of Pb²⁺ adsorbed by the PE hollow fiber adsorbent containing 1.21 mmol/g of -PO₃H wasca. 54.4 g per kg. The adsorption amount of Cu²⁺ and Co²⁺ in the same PE hollow fiber wasca. 21.0 g per kg andca. 32.1 g per kg, respectively. The order of adsorption of the PE hollow fiber adsorbent was Pb²⁺>Co²⁺>Cu²⁺.     

Affinity adsorption of recombinant human interferon‐α on monosize dye‐affinity beads

Monosize, nonporous poly(glycidyl methacrylate) [poly(GMA)] beads were prepared by dispersion polymerization. Cibacron Blue F3GA was covalently attached onto the poly(GMA) beads for adsorption of recombinant interferon‐α (rHuIFN‐α). Monosize poly(GMA) beads were characterized by scanning electron microscopy. Dye‐carrying beads (1.73 mmol/g) were used in the adsorption–elution studies. The effect of initial concentration of rHuIFN‐α, pH, ionic strength, and temperature on the adsorption efficiency was studied in a batch system. Nonspecific adsorption of rHuIFN‐α on the beads was 0.78 mg/g. Dye attachment significantly increased the rHuIFN‐α adsorption up to 181.7 mg/g. Equilibrium adsorption of rHuIFN‐α onto the dye‐carrying beads increased with increasing temperature. Negative change in free energy (ΔG⁰ < 0) indicated that the adsorption was a thermodynamically favorable process. ΔS and ΔH values were 146.1 J/mol K and ?37.39 kJ/mol, respectively. Significant amount of the adsorbed rHuIFN‐α (up to 97.2%) was eluted in the elution medium containing 1.0M NaCl in 1 h. To determine the effects of adsorption conditions on possible conformational changes of rHuIFN‐α structure, fluorescence spectrophotometry was employed. We concluded that dye‐affinity beads can be applied for rHuIFN‐α adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these beads are suitable for rHuIFN‐α adsorption. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 975–981, 2007     

Packed-bed columns with dye-affinity microbeads for removal of heavy metal ions from aquatic systems

A dye ligand Cibacron Blue F3GA, was covalently coupled with polyhydroxyethylmethacrylate (PHEMA) microbeads in the 150–200 μm particle size range. The sorbent carrying 22.3 μmol Cibacron Blue F3GA per gram of polymer was then used to remove Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions in a packed-bed column system. Heavy metal ion adsorption capacity of the column was investigated as a function of heavy metal ion-bearing solution flow rate and the inlet heavy metal ion concentration. The maximum metal ion uptake values found were: 80.60, 96.98, 78.36, 103.98 μmol/g polymer for Pb(II), Cd(II), Cu(II) and Zn(II), respectively. The heavy metal adsorption capacity of the microbeads decreased with an increase in the circulation rate of aqueous solution. The order of affinity based on molar uptake was Zn(II)>Cd(II)>Pb(II)>Cu(II). Removal percentages of heavy metals related to flow time were determined for different flow rates and initial metal ion concentrations. It was observed that PHEMA microbeads carrying Cibacron Blue F3GA can be regenerated by washing with a solution of nitric acid (0.05 M). The desorption ratio was as high as 98.5%.     

Preparation of a novel metal‐chelate affinity beads for albumin isolation from human plasma

In this study, we developed a novel approach to obtain a high protein‐adsorption capacity utilizing 2‐methacryloylamidohistidine (MAH) as a biollgand. MAH was synthesized by reacting methacryloyl chloride and histidine. Spherical beads, with an average size of 150–200 μm, were obtained by the radical suspension polymerization of MAH, ethyleneglycol dimethacrylate (EGDMA), and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. p(EGDMA–HEMA–MAH) beads had a specific surface area of 17.6 m²/g. The synthesized MAH monomer was characterized by NMR. p(EGDMA–HEMA–MAH) beads were characterized by a swelling test, FTIR, and elemental analysis. Then, Cu(II) ions were incorporated into the beads and Cu(II) loading was found to be 0.96 mmol/g. These beads, with a swelling ratio of 65% and containing 1.6 mmol MAH/g, were used in the adsorption/desorption of human serum albumin (HSA) from both aqueous solutions and human serum. The adsorption of HSA onto p(EGDMA–HEMA–MAH) was low (8.8 mg/g). Cu(II) chelation onto the beads significantly increased the HSA adsorption (56.3 mg/g). The maximum HSA adsorption was observed at pH 8.0 Higher HSA adsorption was observed from human serum (94.6 mg HSA/g). Adsorptions of other serum proteins were obtained as 3.7 mg/g for fibrinogen and 8.5 mg/g for γ‐globulin. The total protein adsorption was determined as 107.1 mg/g. Desorption of HSA was obtained using a 0.1M Tris/HCI buffer containing 0.5M NaSCN. High desorption ratios (to 98% of the adsorbed HSA) were observed. It was possible to reuse Cu(II)‐chelated p(EGDMA–HEMA–MAH) beads without significant decreases in the adsorption capacities. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2840–2847, 2003     

Porous dye affinity beads for nickel adsorption from aqueous solutions: A kinetic study

We investigated a new adsorbent system, Reactive Red 120 attached poly(2‐hydroxyethyl methacrylate ethylene dimethacrylate) [poly(HEMA–EDMA)] beads, for the removal of Ni²⁺ ions from aqueous solutions. Poly(HEMA–EDMA) beads were prepared by the modified suspension copolymerization of 2‐hydroxyethyl methacrylate and ethylene dimethacrylate. Reactive Red 120 molecules were covalently attached to the beads. The beads (150–250 μm), having a swelling ratio of 55% and carrying 25.5 μmol of Reactive Red 120/g of polymer, were used in the removal of Ni²⁺ ions. The adsorption rate and capacity of the Reactive Red 120 attached poly(HEMA–EDMA) beads for Ni²⁺ ions was investigated in aqueous media containing different amounts of Ni²⁺ ions (5–35 mg/L) and having different pH values (2.0–7.0). Very high adsorption rates were observed at the beginning, and adsorption equilibria were then gradually achieved in about 60 min. The maximum adsorption of Ni²⁺ ions onto the Reactive Red 120 attached poly(HEMA–EDMA) beads was 2.83 mg/g at pH 6.0. The nonspecific adsorption of Ni²⁺ ions onto poly(HEMA–EDMA) beads was negligible (0.1 mg/g). The desorption of Ni²⁺ ions was studied with 0.1M HNO₃. High desorption ratios (>90%) were achieved. The intraparticle diffusion rate constants at various temperatures were calculated as k_20°C = 0.565 mg/g min^0.5, k_30°C = 0.560 mg/g min^0.5, and k_40°C = 0.385 mg/g min^0.5. Adsorption–desorption cycles showed the feasibility of repeated use of this novel adsorbent system. The equilibrium data fitted very well both Langmuir and Freundlich adsorption models. The pseudo‐first‐order kinetic model was used to describe the kinetic data. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:5056–5065, 2006     

Removal of concentrated heavy metal ions from aqueous solutions using polymers with enriched amidoxime groups

Particulate and fibrous adsorbents with enriched amidoxime groups were synthesized by using a novel monomer N,N′‐dipropionitrile acrylamide. The adsorption properties of amidoximated poly(N,N′‐dipropionitrile acrylamide) [poly(DPAAm)] particles and a nonwoven fabric grafted with the same for UO₂²⁺, Pb²⁺, Cu²⁺, and Co²⁺ at high concentrations were investigated by batch process. Metal ion adsorption studies were conducted from metal ion solutions with different initial concentrations (100–1500 ppm). It was shown that particulated amidoximated poly(DPAAm) has higher adsorption capacity than amidoximated nonwoven fabrics for all metal ions, especially for uranyl ions. The results of the adsorption studies showed that the interaction between UO₂²⁺ and amidoximated groups agree with the Langmuir‐type isotherm. From the Langmuir equation, the adsorption capacities were found as 400 mg UO₂²⁺/g dry amidoximated poly(DPAAm) and 250 mg UO₂²⁺/g dry amidoximated graft polymer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1705–1710, 2004     

Preparation and adsorption properties of poly(N‐vinylformamide/acrylonitrile) chelating fiber for heavy metal ions

In this article we report a new chelating fiber that was prepared from a hydrolyzate of poly(N‐vinylformamide/acrylonitrile) by a wet‐spinning method. This fiber contains chelating groups, such as amidine groups, amino groups, cyano groups, and amide groups, with high densities. We examined the chelating abilities for several metal ions with this fiber, and present the morphological merit of the fibrous product compared with the globular resin. Based on the research results, it is shown that the fiber has higher binding capacities and better adsorption properties for heavy metal ions than the resin. The pH value of the metal ion solution shows strong influences on the adsorption of the metal ions. The maximum adsorption capacities of the fiber for Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, and Mn²⁺ are 112.23, 88.11, 141.04, 108.06, and 73.51 mg/g, respectively. In mixed metal ions solution, the fiber adsorbs Cr³⁺, Cu²⁺ and Co²⁺ efficiently. The adsorbed metal ions can be quantitatively eluted by hydrochloric acid. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1378–1386, 2002