求解多目标流水车间调度Pareto最优解的遗传强化算法

针对多目标流水车间调度Pareto最优问题, 本文建立了以最大完工时间和最大拖延时间为优化目标的多目标流水车间调度问题模型, 并设计了一种基于Q-learning的遗传强化学习算法求解该问题的Pareto最优解. 该算法引入状态变量和动作变量, 通过Q-learning算法获得初始种群, 以提高初始解质量. 在算法进化过程中, 利用Q表指导变异操作, 扩大局部搜索范围. 采用Pareto快速非支配排序以及拥挤度计算提高解的质量以及多样性, 逐步获得Pareto最优解. 通过与遗传算法、NSGA-II算法和Q-learning算法进行对比实验, 验证了改进后的遗传强化算法在求解多目标流水车间调度问题Pareto最优解的有效性.     

多目标混合遗传算法求解流水车间调度问题

为高效地求解多目标流水车间调度问题,提出了一种多目标混合遗传算法,此算法将局部搜索融入进化计算中,采用非劣解并行局部搜索策略,并依据基于Pareto支配关系的个体排序数和密度值进行适应度赋值,以加速算法的收敛,保持群体多样性.仿真结果表明,新算法能够有效地解决多目标流水车间调度问题.     

求解区间柔性作业车间调度的多目标进化算法

针对不确定多目标柔性作业车间调度问题,将工序加工时间采用区间数表示,以区间最大完工时间和区间机器总负荷为优化目标,构建多目标区间柔性作业车间调度模型,并设计一种多目标进化优化算法对该模型进行求解.算法采用混合策略生成初始化种群,并采用贪婪插入法对染色体进行解码,通过基于可能度的占优关系评价个体性能,将区间目标归一化结合拥挤距离反映优化解的分布情况.实验结果验证了所提出算法的有效性.     

直觉模糊集相似度遗传算法求解多目标车间调度问题

为了提高高维多目标置换流水车间调度问题的求解质量,提出基于直觉模糊集相似度的遗传算法(similarity of intuitionistic fuzzy sets GA,SIFS_GA).算法中分别将参考解和Pareto解映射为参考解直觉模糊集和Pareto解直觉模糊集.计算两个集合之间的直觉模糊相似度,用以判断Pareto解的优劣.以直觉模糊集相似度值引导多目标遗传算法进化.对6个CEC标准测试集与10个流水车间调度测试实例进行仿真实验,结果表明SIFS_GA算法性能优于常用的多目标优化算法,且可以有效解决多目标置换流水车间调度问题,尤其在解决规模较大的问题上是一种有效方法.     

基于多目标粒子群算法的混合流水车间调度方法研究

混合流水车间调度问题HFSP是一种具有很强应用背景的生产调度问题。本文给出了一种HFSP多目标调度模型,提出了一种针对该类问题的多目标粒子群算法。该算法采用基于Pareto支配关系的极值更新策略;采取对自适应惯性权重递减和对种群变异的方法以保持种群多样性;设置Pareto解池保存计算中出现的Pareto最优解,并提出了一种基于适应度拥挤度的聚类算法优化解的分布特性。实验结果表明,本文算法是求解HFSP问题的一种有效方法。     

求解多目标作业车间调度问题的混合变异杂草优化算法

针对多目标作业车间调度问题,提出一种混合变异杂草优化算法。该算法采用基于各子目标熵值权重的欧氏贴近度作为适应度值计算方法,引导种群向Pareto前端进化。在进化过程中,运用快速非支配排序策略构建Pareto档案,并利用进化种群中最优个体实时更新Pareto最优解集,提升算法的优化性能;同时通过引入变异算子增加种群多样性,避免算法陷入局部最优。最后,基于Benchmark算例的仿真实验,验证了该算法求解多目标作业车间调度问题的有效性。     

自适应Jaya算法求解多目标柔性车间绿色调度问题

针对多目标柔性作业车间绿色调度问题(MO-FJGSP),建立优化目标为最大完工时间、机器总负荷和能耗最小的多目标数学模型,并设计一种基于Pareto最优解的自适应多目标Jaya算法(SAMO-Jaya)对该问题进行优化求解.算法采用两级实数编码方式实现工序排序与机器分配的编码表示,并设计一种转换机制实现将Jaya连续解空间映射至FJSP离散解空间;然后设计一种混沌序列与均匀分布相结合的混合策略以提高初始种群的质量与全局分散性;此外,在Jaya算法中嵌入自适应调整种群规模的方法以提高算法求解速度.通过10个单目标与3个多目标基准算例测试,并与7个已有算法进行对比分析,结果表明SAMO-Jaya算法能够对MO-FJGSP进行有效求解.     

改进人工蜂群求解多目标柔性作业车间调度问题

针对多个目标约束的柔性作业车间问题,本文采用基于Pareto解集的改进离散人工蜂群算法来求解.由于经典人工蜂群算法的选择概率不适用于多目标问题,本文对选择概率进行了重定义,将排序引入选择概率中;同时采用基于变异操作的邻域搜索方法进行局部搜索,并使用混合列交叉算子提高种群的多样性;采用Harmonic平均距离对Pareto解集进行裁剪,完成对Pareto解集的更新.最后通过实例测试及仿真实验,验证了本文算法在求解多目标柔性作业车间调度时的有效性.     

一种不确定条件下的多目标流水车间调度优化算法

实际中大多数生产调度问题具有多目标优化的性质,本文讨论在不确定加工时间和机器故障的情况下.如何优化多目标流水车间调度问题.首先设计最大流程时间和最大延迟时间两类指标的求解方法,在此基础上提出一种多目标遗传算法,用来迭代求解不确定条件下两类目标的最优化问题.模拟实验的结果表明,本文算法方案可较好解决不确定条件下的流水车间调度问题.     

求解具有混合约束流水车间调度问题的迭代贪婪算法

流水车间调度问题是具有典型工程应用背景的组合优化问题,对该问题的研究具有重要的理论意义和应用价值。基于传统的流水车间调度问题,提出一种有限等待约束、阻塞约束以及无等待约束共存的混合约束流水车间调度问题。以问题的最小化最大完工时间为目标,提出一种利用迭代贪婪算法进行求解的方法,该方法利用改进的NEH算法计算初始解,通过迭代贪婪算法进行优化,并设计多点交叉策略和插入邻域搜索策略提高解的质量。通过经典实例测试,验证了所提算法的有效性。     

A hybrid quantum-inspired genetic algorithm for multiobjective flow shop scheduling.

This paper proposes a hybrid quantum-inspired genetic algorithm (HQGA) for the multiobjective flow shop scheduling problem (FSSP), which is a typical NP-hard combinatorial optimization problem with strong engineering backgrounds. On the one hand, a quantum-inspired GA (QGA) based on Q-bit representation is applied for exploration in the discrete 0-1 hyperspace by using the updating operator of quantum gate and genetic operators of Q-bit. Moreover, random-key representation is used to convert the Q-bit representation to job permutation for evaluating the objective values of the schedule solution. On the other hand, permutation-based GA (PGA) is applied for both performing exploration in permutation-based scheduling space and stressing exploitation for good schedule solutions. To evaluate solutions in multiobjective sense, a randomly weighted linear-sum function is used in QGA, and a nondominated sorting technique including classification of Pareto fronts and fitness assignment is applied in PGA with regard to both proximity and diversity of solutions. To maintain the diversity of the population, two trimming techniques for population are proposed. The proposed HQGA is tested based on some multiobjective FSSPs. Simulation results and comparisons based on several performance metrics demonstrate the effectiveness of the proposed HQGA.     

An Effective PSO-Based Hybrid Algorithm for Multiobjective Permutation Flow Shop Scheduling

This paper proposes a hybrid algorithm based on particle swarm optimization (PSO) for a multiobjective permutation flow shop scheduling problem, which is a typical NP-hard combinatorial optimization problem with strong engineering backgrounds. Not only does the proposed multiobjective algorithm (named MOPSO) apply the parallel evolution mechanism of PSO characterized by individual improvement, population cooperation, and competition to effectively perform exploration but it also utilizes several adaptive local search methods to perform exploitation. First, to make PSO suitable for solving scheduling problems, a ranked-order value (ROV) rule based on a random key technique to convert the continuous position values of particles to job permutations is presented. Second, a multiobjective local search based on the Nawaz-Enscore-Ham heuristic is applied to good solutions with a specified probability to enhance the exploitation ability. Third, to enrich the searching behavior and to avoid premature convergence, a multiobjective local search based on simulated annealing with multiple different neighborhoods is designed, and an adaptive meta-Lamarckian learning strategy is employed to decide which neighborhood will be used. Due to the fusion of multiple different searching operations, good solutions approximating the real Pareto front can be obtained. In addition, MOPSO adopts a random weighted linear sum function to aggregate multiple objectives to a single one for solution evaluation and for guiding the evolution process in the multiobjective sense. Due to the randomness of weights, searching direction can be enriched, and solutions with good diversity can be obtained. Simulation results and comparisons based on a variety of instances demonstrate the effectiveness, efficiency, and robustness of the proposed hybrid algorithm.     

An MO‐GVNS algorithm for solving a multiobjective hybrid flow shop scheduling problem

This paper addresses the multiobjective hybrid flow shop (MOHFS) scheduling problem. In the MOHFS problem considered here, we have a set of jobs that must be performed in a set of stages. At each stage, we have a set of unrelated parallel machines. Some jobs may skip stages. The evaluation criteria are the minimizations of makespan, the weighted sum of the tardiness, and the weighted sum of the earliness. For solving it, an algorithm based on the multiobjective general variable neighborhood search (MO‐GVNS) metaheuristic, named adapted MO‐GVNS, is proposed. This work also presents and compares the results obtained by the adapted MO‐GVNS with those of four other algorithms: multiobjective reduced variable neighborhood search, nondominated sorting genetic algorithm II (NSGA‐II), and NSGA‐III, and another MO‐GVNS from the literature. The results were evaluated based on the Hypervolume, Epsilon, and Spacing metrics, and statistically validated by the Levene test and confidence interval charts. The results showed the efficiency of the proposed algorithm for solving the MOHFS problem.     

应用强化学习算法求解置换流水车间调度问题

面对日益增长的大规模调度问题,新型算法的开发越显重要.针对置换流水车间调度问题,提出了一种基于强化学习Q-Learning调度算法.通过引入状态变量和行为变量,将组合优化的排序问题转换成序贯决策问题,来解决置换流水车间调度问题.采用所提算法对OR-Library提供Flow-shop国际标准算例进行测试,并与已有的一些算法对比,结果表明算法的有效性.     

求解流水线调度问题的万有引力搜索算法

研究了以最大完工时间为目标的流水线调度问题,使用万有引力算法求解调度问题,提出了一种最大排序规则,利用物体间各个位置分量值存在的大小次序关系,并结合随机键编码的方法产生,将物体的连续位置转变成了一个可行的调度方案;提出了一种边界变异的策略使得越界的物体不再聚集在边界上,而是分布在边界附近的可行空间内,从而增加种群的多样性;结合交换算子和插入算子提出了一种新的局部搜索算法,有效地避免了算法陷入局部最优值,进一步提高了解的质量.最后证明了算法的收敛性,并且计算了算法的时间复杂度和空间复杂度,仿真实验说明了所得算法的有效性.     

应用模拟植物生长算法求解置换流水车间调度问题*

针对置换流水车间调度问题,提出了一种基于模拟植物生长的调度算法。该算法利用置换流水车间调度的有向图表示,提出了可交换节点集概念,并将其融入模拟植物生长算法中,解决置换流水车间调度问题。采用所提算法对置换流水车间调度问题的基准数据进行测试,并比对标准遗传算法,结果表明算法的有效性。     

A novel differential evolution algorithm for bi-criteria no-wait flow shop scheduling problems

This paper presents a novel discrete differential evolution (DDE) algorithm for solving the no-wait flow shop scheduling problems with makespan and maximum tardiness criteria. First, the individuals in the DDE algorithm are represented as discrete job permutations, and new mutation and crossover operators are developed based on this representation. Second, an elaborate one-to-one selection operator is designed by taking into account the domination status of a trial individual with its counterpart target individual as well as an archive set of the non-dominated solutions found so far. Third, a simple but effective local search algorithm is developed to incorporate into the DDE algorithm to stress the balance between global exploration and local exploitation. In addition, to improve the efficiency of the scheduling algorithm, several speed-up methods are devised to evaluate a job permutation and its whole insert neighborhood as well as to decide the domination status of a solution with the archive set. Computational simulation results based on the well-known benchmarks and statistical performance comparisons are provided. It is shown that the proposed DDE algorithm is superior to a recently published hybrid differential evolution (HDE) algorithm [Qian B, Wang L, Huang DX, Wang WL, Wang X. An effective hybrid DE-based algorithm for multi-objective flow shop scheduling with limited buffers. Computers & Operations Research 2009;36(1):209–33] and the well-known multi-objective genetic local search algorithm (IMMOGLS2) [Ishibuchi H, Yoshida I, Murata T. Balance between genetic search and local search in memetic algorithms for multiobjective permutation flowshop scheduling. IEEE Transactions on Evolutionary Computation 2003;7(2):204–23] in terms of searching quality, diversity level, robustness and efficiency. Moreover, the effectiveness of incorporating the local search into the DDE algorithm is also investigated.     

求解置换流水线调度问题的改进萤火虫优化算法

针对最小化最大完成时间的置换流水线调度问题,提出了一种改进的离散萤火虫优化算法。在传统萤火虫优化算法的基础上,采用基于升序排序的随机键编码方式对萤火虫种群进行离散化处理,使用NEH算法对萤火虫种群进行初始化处理,结合遗传算法的交叉变异思想改进位置更新策略,采用个体变异方式解决孤立个体问题,提高算法的寻优能力。最后通过典型算例对改进算法进行仿真测试,实验结果表明该算法求解置换流水线调度问题时具备很强的寻优能力和鲁棒性,明显优于传统萤火虫优化算法和遗传算法,是解决置换流水线调度问题的一种有效算法。     

A genetic algorithm for permutation flow shop scheduling under make to stock production system

The permutation flow shop scheduling is a well-known combinatorial optimization problem that arises in many manufacturing systems. Over the last few decades, permutation flow shop problems have widely been studied and solved as a static problem. However, in many practical systems, permutation flow shop problems are not really static, but rather dynamic, where the challenge is to schedule n different products that must be produced on a permutation shop floor in a cyclical pattern. In this paper, we have considered a make-to-stock production system, where three related issues must be considered: the length of a production cycle, the batch size of each product, and the order of the products in each cycle. To deal with these tasks, we have proposed a genetic algorithm based lot scheduling approach with an objective of minimizing the sum of the setup and holding costs. The proposed algorithm has been tested using scenarios from a real-world sanitaryware production system, and the experimental results illustrates that the proposed algorithm can obtain better results in comparison to traditional reactive approaches.