Studying trivalent/bivalent metal ion doped TiO2 as p-TiO2 in bipolar heterojunction devices

Trivalent/bivalent metal ions doped TiO₂ thin films (M_xTi_1−xO₂, M = Cr³⁺, Fe³⁺, Ni²⁺, Co²⁺, Mn²⁺ and x = 0.01, 0.05, 0.1, 0.15, 0.2) were deposited on Indium–tin oxide (ITO) coated glass substrates by spin coating technique. X-ray photoelectron spectroscopy (XPS) showed Ti⁴⁺ oxidation state of the Ti2p band in the doped p-TiO₂. The homogenous M_xTi_1−xO₂ was used to support n-ZnO thin films with thickness ∼40–80 nm and vertically aligned n-ZnO nanorods (NR) with length ∼300 nm and 1.5 μm. Current (I)–voltage (V) characteristics for the Ag/n-ZnO/M_xTi_1−xO₂/ITO/glass assembly showed rectifying behavior with small turn-on voltages (V₀) < 1 V. The ideality factor (η) and the resistances in both forward and reverse bias were calculated. The temperature dependence performance of these bipolar devices was performed and variation of the parameters with temperature was studied.     

Effect of chromium substitution on structure and magnetic properties of Bi2Fe4O9

Orthorhombic Bi₂Fe_4 − xCr_xO₉ (x = 0.0, 0.25, and 0.75) nanoplatelets were synthesized by a simple hydrothermal method. The structure, morphology, and magnetic properties of the obtained powders have been characterized. Calculation of the lattice parameters of Bi₂Fe_4 − xCr_xO₉, as well as bond lengths and angles, was carried out by X-ray diffraction Rietveld refinement. The volumes of the metal-oxygen tetrahedra and octahedra were calculated to be sequentially increasing as the Cr doping level increases. The samples undergo an antiferromagnetic transition at 250 ± 5 K. The magnetic moments of the samples increase with higher Cr doping level. The 3d electron spin state for Fe³⁺ in the as-prepared samples is different, which is possibly due to the distortion of Fe-O tetrahedra and octahedra in the crystal structure after chromium substitution.     

A yellow-emitting Ca3Si2O7: Eu phosphor for white LEDs

A series of yellow-emitting phosphors based on a silicate host matrix, Ca_3 − xSi₂O₇: xEu²⁺, was prepared by solid-state reaction method. The structure and photoluminescent properties of the phosphors were investigated. The XRD results show that the Eu²⁺ substitution of Ca²⁺ does not change the structure of Ca₃Si₂O₇ host and there is no impurity phase for x < 0.12. The SEM images display that phosphors aggregate obviously and the shape of the phosphor particle is irregular. The EDX results reveal that the phosphors consist of Ca, Si, O, Eu and the concentration of these elements is close to the stoichiometric composition. The Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be excited at a wavelength of 300-490 nm, which is suitable for the emission band of near ultraviolet or blue light-emitting-diode (LED) chips. The phosphors exhibit a broad emission region from 520 to 650 nm and the emission peak centered at 568 nm. In addition, the shape and the position of the emission peak are not influenced by the Eu²⁺ concentration and excitation wavelength. The phosphor for x = 0.045 has the strongest excitation and emission intensity, and the Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be used as candidates for the white LEDs.     

Luminescence properties of Eu ions doped in Y2−xGdxO3 thin films grown by pulsed laser deposition method

Luminescence properties of Y_2−xGd_xO₃:Eu³⁺ (x = 0 to 2.0) thin films are investigated by site-selective laser excitation spectroscopy. The films were grown by pulsed laser deposition method on SiO₂ (100) substrates. Cubic phase Y₂O₃ and Gd₂O₃ and monoclinic phase Gd₂O₃ are identified in the excitation spectrum of the ⁷F₀ → ⁵D₀ transition of Eu³⁺. The emission spectra of the ⁵D₀ → ⁷F_J (J = 1 and 2) transition from individual Eu³⁺ centers were obtained by tuning the laser to resonance with each excitation line. The excitation line at around 580.60 nm corresponds to the line from Eu³⁺ with C₂ site symmetry of cubic phase. New lines at 578.65 and 582.02 nm for the C_S sites of Gd₂O₃ with monoclinic phase are observed by the incorporation of Gd in Y₂O₃ lattice. Energy transfer occurs between Eu³⁺ ions at the C_S sites and from Eu³⁺ ions at the C_S sites to those at the C₂ site in Y_2−xGd_xO₃.     

Crystal structure and ferroelectric properties of Ca(Cu3−xMx)Ti4O12 (M = Fe and Ni) ceramics

M-substituted Ca(Cu_3−xM_x)Ti₄O₁₂ (CCMTO) ceramics, where M = Fe and Ni, were synthesized and the influence of M substitutions for Cu on the crystal structure and ferroelectric properties of CCMTO ceramics were investigated in this study. From the variations in the lattice parameters of CCMTO ceramics, the solubility limit of Ni substitution for Cu in CaCu_3−xNi_xTi₄O₁₂ (CCNTO) ceramics was x = 0.2, whereas that of CaCu_3−xFe_xTi₄O₁₂ (CCFTO) ceramics was x = 0.05. The crystal structural analysis of CCMTO ceramics revealed that the single phase of CCMTO ceramics belongs to the I23 non-centrosymmetric space group of I23; as a result, the P_r and E_c values of CCFTO ceramics at x = 0.05 were 1.8 μC/cm² and 40 kV/cm, respectively. The ferroelectric behavior of CCMTO ceramics by the M substitutions for Cu may be related to the displacement of a Ti⁴⁺ cation in the TiO₆ octahedra and tilting of the Ti–O–Ti angle because of the non-centrosymmetric space group.     

Photoluminescence properties of RE-activated Na3GdP2O8 (RE = Tb, Dy, Eu, Sm) under VUV excitation

RE³⁺-activated monoclinic Na₃GdP₂O₈ (RE³⁺ = Tb³⁺, Dy³⁺, Eu³⁺, Sm³⁺) phosphors have been synthesized by a solid-state reaction method. Their photoluminescence properties in the vacuum ultraviolet (VUV) region were investigated. By analyzing their excitation spectra, the host-related absorption band was determined to be around 166 nm. The f-d transition bands and the charge transfer bands for Na₃GdP₂O₈:RE³⁺ (RE³⁺ = Tb³⁺, Dy³⁺, Eu³⁺, Sm³⁺) were assigned and corroborated. For the sample Na₃GdP₂O₈:5%Tb³⁺, the strong bands at around 202 and 221 nm are assigned to the 4f-5d spin-allowed transitions and the weak band at 266 nm is related to the spin-forbidden transition of Tb³⁺. For Na₃GdP₂O₈:5%Dy³⁺, the broad band at 176 nm could be related to the f-d transitions of Dy³⁺ and the O²⁻ → Dy³⁺ charge transfer band (CTB) besides the host-related absorption. In the excitation spectrum of Eu³⁺ doped sample, the O²⁻ → Eu³⁺ CTB is observed to be at 245 nm. For the Sm³⁺ doped sample, the O²⁻ → Sm³⁺ CTB is not distinguished obviously and is overlapped with the host-related absorption band.     

Structure and magnetic property of CoFe2−xSmxO4 (x = 0–0.2) nanofibers prepared by sol–gel route

CoFe_2−xSm_xO₄ (x = 0–0.2) nanofibers with diameters about 100–300 nm have been prepared using the organic gel-thermal decomposition method. The composition, structure and magnetic properties of the CoFe_2−xSm_xO₄ nanofibers were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, inductive coupling plasma mass analyzer and vibrating sample magnetometer. The CoFe_2−xSm_xO₄ (x = 0–0.2) nanofibers obtained at 500–700 °C are of a single spinel structure. But, at 800 °C with a relatively high Sm content of 0.15–0.2 the spinel CoFe_2−xSm_xO₄ ferrite is unstable and the second phase of perovskite SmFeO₃ occurs. The crystalline grain sizes of the CoFe_2−xSm_xO₄ nanofibers decrease with Sm contents, while increase with the calcination temperature. This grain reduction effect of the Sm³⁺ ions doping is largely owing to the lattice strain and stress induced by the substitution of Fe³⁺ ions with larger Sm³⁺ ions in the ferrite. The saturation magnetization and coercivity increase with the crystallite size in the range of 8.8–57.3 nm, while decrease with the Sm content from 0 to 0.2 owing to a smaller magnetic moment of Sm³⁺ ions. The perovskite SmFeO₃ in the composite nanofibers may contribute to a high coercivity due to the interface pinning, lattice distortion and stress in the ferrite grain boundary fixing and hindering the domain wall motion.     

Synthesis and electrochemical properties of Ti doped Li3 − xFe2 − xTix(PO4)3/C cathode materials

Li_3 − xFe_2 − xTi_x(PO₄)₃/C (x = 0-0.4) cathodes designed with Fe doped by Ti was studied. Both Li₃Fe₂(PO₄)₃/C (x = 0) and Li_2.8Fe_1.8Ti_0.2(PO₄)₃/C (x = 0.2) possess two plateau potentials of Fe³⁺/Fe²⁺ couple (around 2.8 V and 2.7 V vs. Li⁺/Li) upon discharge observed from galvanostatic charge/discharge and cyclic voltammetry. Li_2.8Fe_1.8Ti_0.2(PO₄)₃/C has higher reversibility and better capacity retention than that of the undoped Li₃Fe₂(PO₄)₃/C. A much higher specific capacity of 122.3 mAh/g was obtained at C/20 in the first cycle, approaching the theoretical capacity of 128 mAh/g, and a capacity of 100.1 mAh/g was held at C/2 after the 20th cycle.     

Luminescence properties of Ca4Y6(SiO4)6O:RE (RE = Eu, Tb, Dy, Sm and Tm) under vacuum ultraviolet excitation

The vacuum ultraviolet excited luminescent properties of Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺ and Tm³⁺ in the matrices of Ca₄Y₆(SiO₄)₆O were investigated. The bands at about 173 nm in the vacuum ultraviolet excited spectra were attributed to host lattice absorption of the matrix Ca₄Y₆(SiO₄)₆O. For Eu³⁺-doped samples, the O²⁻ → Eu³⁺ CTB was identified at 258 nm. Typical 4f-5d absorption bands in the region of 195-300 nm were observed in Tb³⁺-doped samples. For Dy³⁺-doped and Sm³⁺-doped samples, the broad excitation bands consisted of host absorptions, CTB and f-d transition. For Tm³⁺-doped samples, the O²⁻ → Tm³⁺ CTB was located at 191 nm. About the color purity and emission intensity, Ca₄Y₆(SiO₄)₆O:Tb³⁺ is an attractive candidate of green light PDP phosphor, and Ca₄Y₆(SiO₄)₆O:Dy³⁺ has potential application in the field of mercury-free lamps.     

A red-emitting heavy doped phosphor Li6Y(BO3)3:Eu for white light-emitting diodes

A series of Eu³⁺ activated Li₆Y_1−xEu_x(BO₃)₃ (0.05 ? x ? 1) phosphors were synthesized by solid-state reaction method. The structures and photoluminescent properties of the phosphors were investigated at room temperature. The results of XRD patterns indicate that these phosphors are isotypic to the monoclinic Li₆Gd(BO₃)₃. The excitation spectra indicate that these phosphors can be effectively excited by near UV (370-410 nm) light. The red emission from transition ⁵D₀→⁷F₂ is dominant. The emission spectra exhibit strong red performance (CIE chromaticity coordinates: x = 0.65, y = 0.35), which is due to the ⁵D₀−⁷F_J transitions of Eu³⁺ ions. The relationship between the structure and the photoluminescent properties of the phosphors was studied. The concentration quenching occurs at x ≈ 0.85 under near UV excitation. Li₆Y(BO₃)₃:Eu³⁺ has potential application as a phosphor for white light-emitting diodes.     

Influence of dysprosium oxide doping on thermophysical properties of LaMgAl11O19 ceramics

This paper deals with the influence of dysprosium oxide doping on thermophysical properties of LaMgAl₁₁O₁₉ ceramics. LaMgAl₁₁O₁₉ ceramic powders doped with different contents of dysprosium oxide were pressureless-sintered at 1700 °C for 10 h in air to fabricate dense bulk ceramics. La_1−xDy_xMgAl₁₁O₁₉ (x = 0, 0.1, 0.2, 0.3) ceramics have a relative density of 90.7–96.0%, and exhibit a single phase of magnetoplumbite structure. Thermal diffusivity and thermal expansion coefficients of La_1−xDy_xMgAl₁₁O₁₉ ceramics were measured with a laser flash method and a high-temperature dilatometer. Thermal diffusivity of La_1−xDy_xMgAl₁₁O₁₉ ceramics decreases with increasing Dy₂O₃ content at identical temperature levels. The measured thermal conductivity of La_1−xDy_xMgAl₁₁O₁₉ ceramics is located in the range of 2.52–2.89 W m⁻¹ K⁻¹ at 1200 °C. Thermal expansion coefficient of La_0.8Dy_0.2MgAl₁₁O₁₉ ceramic is slightly higher than that of undoped LaMgAl₁₁O₁₉ ceramic at identical temperature levels.     

Observation of broadband infrared luminescence in a novel Bi-doped P2O5-B2O3-Al2O3 glass

A novel Bi-doped P₂O₅-B₂O₃-Al₂O₃ glass was investigated, and strong broadband NIR (near infrared) luminescence was observed when the sample was excited by 445 nm, 532 nm, 808 nm and 980 nm lasers, respectively. The max FWHM with 312 nm, the lifetime with 580 μs and the σ_emτ product with 5.3 × 10^− 24 cm² s were obtained which indicates that this glass is a promising material for broadband optical amplifier and tunable laser. The effect of the introduction of B₂O₃ on the glass structure and Bi-ions illuminant mechanism were discussed and analyzed. It is suggested that the introduction of B₂O₃ makes the glass structure closer, and the broadband NIR emission derives from Bi⁰:²D_3/2 → ⁴S_3/2 and Bi⁺:³P₁ → ³P₀ transitions.     

V-doping effects on ferroelectric properties of K0.5Bi4.5Ti4O15 thin films

V-doped K_0.5Bi_4.5Ti₄O₁₅ (K_0.5Bi_{4.5 − x/3}Ti_4 − xV_xO₁₅, KBTiV-x, x = 0.00, 0.01, 0.03, and 0.05) thin films were prepared on a Pt(111)/Ti/SiO₂/Si(100) substrate by a chemical solution deposition method. The thin films were annealed by using a rapid thermal annealing process at 750 °C for 3 min in an oxygen atmosphere. Among them, KBTiV-0.03 thin film exhibited the most outstanding electrical properties. The value of remnant polarization (2P_r) was 75 μC/cm² at an applied electric field of 366 kV/cm. The leakage current density of the thin film capacitor was 5.01 × 10⁻⁸ at 100 kV/cm, which is approximately one order of magnitude lower than that of pure K_0.5Bi_4.5Ti₄O₁₅ thin film capacitor. We found that V doping is an effective method for improving the ferroelectric properties of K_0.5Bi_4.5Ti₄O₁₅ thin film.     

Influence of excitation wavelengths on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol-gel-combustion processing

Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ red-emitting long afterglow phosphor was synthesized by sol-gel-combustion methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu₂O₃, Dy₂O₃, H₃BO₃ and C₆H₈O₇·H₂O as raw materials. The crystalline structure of the phosphors were characterized by X-ray diffraction, luminescent properties of phosphors were analyzed by fluorescence spectrophotometer. The effect of excitation wavelengths on the luminescent properties of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors was discussed. The emission peak of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor lays at 516 nm under the excitation of 360 nm, and at 612 nm under the excitation of 468 nm. The results reveal that the Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor will emit a yellow-green light upon UV illumination, and a bright red light upon visible light illumination. The emission mechanism was discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions in Sr₃Al₂O₆. The afterglow time of (Sr_0.94Eu_0.03Dy_0.03)₃ Al₂O₆ phosphors lasts for over 600s after the excited source was cut off.     

Novel Dy-doped Ca2Gd8(SiO4)6O2 white light phosphors for Hg-free lamps application

The luminescent properties of Ca₂Gd_8(1−x)(SiO₄)₆O₂:xDy³⁺ (1% ≤ x ≤ 5%) powder crystals with oxyapatite structure were investigated under vacuum ultraviolet excitation. In the excitation spectrum, the peaks at 166 nm and 191 nm of the vacuum ultraviolet region can be assigned to the O²⁻ → Gd³⁺, and O²⁻ → Dy³⁺ charge transfer band respectively, which is consistent with the theoretical calculated value using Jφrgensen's empirical formula. While the peaks at 183 nm and 289 nm are attributed to the f-d spin-allowed transitions and the f-d spin-forbidden transitions of Dy³⁺ in the host lattice with Dorenbos's expression. According to the emission spectra, all the samples exhibited excellent white emission under 172 nm excitation and the best calculated chromaticity coordinate was 0.335, 0.338, which indicates that the Ca₂Gd₈(SiO₄)₆O₂:Dy³⁺ phosphor could be considered as a potential candidate for Hg-free lamps application.     

Raman spectroscopic study of structure of WO3La2O3B2O3 glasses with no color and crystallization of LaBWO6

Glasses with the nominal compositions of xWO₃25La₂O₃(75 − x)B₂O₃ (mol%) with x = 15, 25, and 50 were prepared using a conventional melt quenching method, and their structure and crystallization behavior were examined from Raman scattering spectra and X-ray diffraction analyses. The glasses are colorless in the visible light region and give the optical band gap energy of 3.49-3.61 eV. The glass transition and crystallization temperatures and the thermal stability against crystallization decrease with increasing WO₃ content. The strong Raman bands at 840 and 940-960 cm⁻¹ suggest that the main coordination state of W⁶⁺ ions in the glasses is isolated (WO₄)²⁻ tetrahedral units. The formation of WO₆ octahedral units is also suggested in the glasses with high WO₃ contents. The main crystallization mechanism in the glasses is the surface crystallization, and the glass of 50WO₃25La₂O₃25B₂O₃ shows the crystallization of LaBWO₆ single phase. The present study proposes that WO₃La₂O₃B₂O₃ glasses and crystallized glasses are very interesting as optical functional materials.     

Enhanced thermoelectric properties of NaCo2O4 by adding ZnO

The primary phase present in the as-sintered Na(Co_1 − xZn_x)₂O₄ (0 ≤ x ≤ 0.1) bodies was the solid solution of the constituent oxides with a bronze-type layered structure. The electrical conductivity of the Na(Co_1 − xZn_x)₂O₄ samples significantly increased with an increase in ZnO content. The sign of the Seebeck coefficient for all samples was positive over the whole temperature range (723-1073 K), i.e., p-type conduction. The power factor of Na(Co_0.95Zn_0.05)₂O₄ showed an outstanding power factor (1.7 × 10^− 3Wm^− 1 K^− 2) at 1073 K. The power factor was above four times superior to that of ZnO-free NaCo₂O₄ (0.4 × 10^− 3Wm^− 1 K^− 2). This originates from an unusually large Seebeck coefficient (415 μVK^− 1) accompanied with high conductivity (127Ω^− 1 cm^− 1) at 1073 K.     

Growth and spectral properties of Cr:KAl(MoO4)2 crystal

The Cr³⁺:KAl(MoO₄)₂ single crystal was grown by top seeding solution growth method (TSSG). Based on the absorption and emission spectra, the crystal field strength Dq, the Racah parameters B and C, the effective phonon energy ?ω and the Huang-Rhys factor S were calculated: Dq = 1494.8 cm^− 1, B = 585.5 cm^− 1 and C = 3049 cm^− 1, ?ω = 373.8 cm^− 1 and the Huang-Rhys factor S = 3.74, respectively. The value Dq/B = 2.55 indicates that Cr³⁺ ion occupies the strong crystal field site in KAl(MoO₄)₂ crystal. A comparison of crystal field parameters for Cr³⁺:KAl(MoO₄)₂ with other Cr³⁺-doped crystals was presented. The results of spectral measurement show that Cr³⁺:KAl(MoO₄)₂ may be a potential candidate for broadband laser applications.     

Optical properties of transparent Dy doped Ba2TiSi2O8 glass ceramic

The Ba₂TiSi₂O₈ is a well known piezoelectric, ferroelectric and non-linear crystal. Nanocrystals of Ba₂TiSi₂O₈ doped with 1.5 Dy³⁺ have been obtained by thermal treatment of a precursor glass and their optical properties have been studied. X-ray diffraction patterns and optical measurements have been carried out on the precursor glass and glass ceramic samples. The emission spectra corresponding to the Dy³⁺: ⁴F_9/2 → ⁶H_13/2 (575 nm), ⁴F_9/2 → ⁶H_11/2 (670 nm) and ⁴F_9/2 → ⁶H_9/2 (757 nm) transitions have been obtained under laser excitation at 473 nm. These measurements confirm the incorporation of the Dy³⁺ ions into the Ba₂TiSi₂O₈ nanocrystals which produces an enhancement of luminescence at 575 nm. At this wavelength has been demonstrated a maximum optical amplification around 1.9 cm⁻¹ (∼8.2 dB/cm).