Reactive green HE‐4BD functionalized supermacroporous poly(hydroxyethyl methacrylate) cryogel for heavy metal removal

The aim of this study was to investigate the heavy metal adsorption performance of supermacroporous poly(hydroxyethyl methacrylate) [PHEMA] cryogel. The PHEMA cryogel was produced by cryo‐polymerization. The PHEMA cryogel was characterized by scanning electron microscopy (SEM). The PHEMA cryogel containing 385 μmol Reactive Green HE‐4BD/g were used in the adsorption studies. Adsorption capacity of the PHEMA cryogel for the metal ions, i.e., Cu²⁺, Cd²⁺, and Pb²⁺ were investigated in aqueous media containing different amounts of the ions (5–600 mg/L) and at different pH values (3.2–6.9). The maximum adsorption capacities of the PHEMA cryogel were 11.6 mg/g (56 μmol/g) for Pb²⁺, 24.5 mg/g (385 μmol/g) for Cu²⁺ and 29.1 mg/g (256 μmol/g) for Cd²⁺. The competitive adsorption capacities were 10.9 mg/g (52 μmol/g) for Pb²⁺, 22.1 mg/g for Cd²⁺ (196 μmol/g) and 23.2 mg/g (365 μmol/g) for Cu²⁺. The PHEMA/Reactive Green HE‐4BD cryogel exhibited the following metal ion affinity sequence on molar basis: Cu²⁺ > Cd²⁺ > Pb²⁺. The PHEMA/Reactive Green HE‐4BD cryogel can be easily regenerated by 50 mM EDTA with higher effectiveness. These features make the PHEMA/Reactive Green HE‐4BD cryogel a potential adsorbent for heavy metal removal. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Welan Gum-Modified Cellulose Bead as an Effective Adsorbent of Heavy Metal Ions (Pb2+, Cu2+, and Cd2+) in Aqueous Solution

A novel welan gum-modified cellulose adsorbent was prepared through emulsification, regeneration, and modification. SEM and FTIR were used to characterize the modified cellulose adsorbent. The adsorption isotherms of metal ions on the adsorbent were well fitted by Langmuir model, with the maximum adsorption capacities of 83.6, 77.0, and 67.4 mg/g for Cd²⁺, Pb²⁺, and Cu²⁺, respectively. The adsorption kinetics was well described using the pseudo-first-order model. Moreover, the adsorption capacities for the three metal ions increased with the increase of temperature, and the optimal pH was 5. Furthermore, the thermodynamic analysis indicated that the adsorption processes were spontaneous and endothermic.     

L-cystein modified bentonite-cellulose nanocomposite (cellu/cys-bent) for adsorption of Cu2+, Pb2+, and Cd2+ ions from aqueous solution

In this study, L-cystein modified bentonite-cellulose (cellu/cys-bent) nanocomposite was synthesized and characterized by XRD, FTIR, SEM with EDS, TGA, and TEM techniques. In order to optimize the process the effect of various operational parameters such as pH, adsorbent dosage, contact time, and temperature were also investigated. The adsorption experiments were carried out in initial concentrations range of 20-100 mg L^?1and the adsorbent affinity for metal ions was found to be in order of Cu²⁺ > Pb²⁺ > Cd²⁺. The optimum pH for adsorption of Cu²⁺ and Cd²⁺ was observed at 5 while for Pb²⁺ it was pH 6. Based on the Langmuir model, the maximum adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ at 50^?C was found to be 32.36, 18.52, and 16.12 mg g^?1, respectively. The Langmuir isotherm and pseudo-second order model were found to be better fitted than the other isotherms and kinetic models. The results of thermodynamic parameters confirmed the process to be endothermic and spontaneous in nature.     

Adsorption for metal ions of chitosan coated cotton fiber

A kind of adsorbent for metal ions, cotton fiber coated by high loading of chitosan (SCCH) was prepared. Its structure was characterized by elemental analysis, scanning electronic microscopy (SEM), Fourier transform infrared spectrum (FTIR), and wide‐angle X‐ray diffraction (WAXD). The adsorption properties of SCCH for Cu²⁺, Ni²⁺, Pb²⁺, Cd²⁺, such as saturated adsorption capacities, static kinetics, and isotherm were investigated. The adsorption for Ni²⁺, Pb²⁺, and Cd²⁺ was controlled by liquid film diffusion, but by particle diffusion for Cu²⁺. The adsorption process for Cu²⁺, Ni²⁺, Cd²⁺ could be described with Langmuir or Freundlich equation, but only with Freundlich equation for Pb²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The synthesis of modified alginate flocculants and their properties for removing heavy metal ions of wastewater

A new flocculant was synthesized through the modification of sodium alginate with thiosemicarbazide. In the preparation, amino thiourea groups which had excellent adsorption properties for heavy metal ions were introduced to the flocculant. The structure of the flocculant was confirmed by elemental analysis, Fourier transform infrared, UV spectrophotometry, nuclear magnetic resonance, and thermal analysis. The flocculation behaviors of the flocculant for three heavy metal ions were investigated. The results showed that the removal rates of the flocculant for Pb²⁺, Cd²⁺, and Cu²⁺ reached up to 97.8%, 86.3%, and 80.0%, respectively, and the flocculation capacities were as high as 489, 215, and 160 mg/g, respectively. The excellent adsorption was ascribed to the double effects of electronic interaction and chelation between the flocculant and heavy metal ions. The flocculant had particular flocculation selectivity for Pb²⁺ in the mixed heavy metal ion solutions containing Cd²⁺or Cu²⁺, respectively. The flocculation process corresponded to Langmuir isotherm model, the flocculation kinetics agree with pseudo second order. The flocculant had potential applications for treatment of wastewater. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46577.     

Adsorption of heavy metals and methylene blue from aqueous solution with citric acid modified peach stone

Peach stones (PS) modified by citric acid (MPS) were used to remove heavy metals and methylene blue (MB) from wastewater. The effects of experimental factors such as pH, adsorbent dosage and contact time, etc. were conducted. Moreover, the adsorption kinetics and isotherm studies also were investigated. According to the Langmuir isotherm model, the maximum adsorption capacities of Pb²⁺, Cd²⁺, Cu²⁺ and MB were 118.76, 37.48, 32.22 and 178.25 mg/g, respectively. Finally, column experiments were also carried out to investigate the adsorption of Pb²⁺ and MB. All results indicated that PS has a good potential for the treatment of wastewater.     

Removal of Cd2+, Cu2+, Ni2+, and Pb2+ ions from aqueous solutions using tururi fibers as an adsorbent

This work investigates the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ ions from aqueous solutions using tururi fibers as an adsorbent under both batchwise and fixed‐bed conditions. It was found that modification of the tururi fibers with sodium hydroxide increased the adsorption efficiencies of all metal ions studied. The fractional factorial design showed that pH, adsorbent mass, agitation rate, and initial metal concentration influenced each metal adsorption differently. The kinetics showed that multi‐element adsorption equilibria were reached after 15 min following pseudo‐second‐order kinetics. The Langmuir, Freundlich, and Redlich–Peterson models were used to evaluate the adsorption capacities by tururi fibers. The Langmuir model was found to be suitable for all metal ions. Breakthrough curves revealed that saturation of the bed was reached in 160.0 mL with Cd²⁺ and Cu²⁺, and 52.0 mL with Ni²⁺ and Pb²⁺. The Thomas model was applied to the experimental data of breakthrough curves and represented the data well. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40883.     

Synthesis of magnetic Fe3O4@SiO2-(-NH2/-COOH) nanoparticles and their application for the removal of heavy metals from wastewater

In this work, Fe₃O₄@SiO₂-(-NH₂/-COOH) nanoparticles were synthesized for the removal of Cd²⁺, Pb²⁺ and Zn²⁺ ions from wastewater. The results of characterization showed that Fe₃O₄@SiO₂-(-NH₂/-COOH) was superparamagnetic with a core–shell structure. The surface of Fe3O4 was successfully coated with silica and modified with amino groups and carboxyl groups through the use of a silane coupling agent, polyacrylamide and polyacrylic acid. The dispersion of the particles was improved, and the surface area of the Fe3O4@SiO2-(-NH2/-COOH) nanoparticles was 67.8 m²/g. The capacity of Fe₃O₄@SiO₂-(-NH₂/-COOH) to adsorb the three heavy metals was in the order Pb²⁺ > Cd²⁺ > Zn²⁺, and the optimal adsorption conditions were an adsorption dose of 0.8 g/L, a temperature of 30°C and concentrations of Pb²⁺, Cd²⁺ and Zn²⁺ below 120, 80 and 20 mg/L, respectively. The maximum adsorption capacities for Pb²⁺, Cd²⁺ and Zn²⁺ were 166.67, 84.03 and 80.43 mg/g. The adsorption kinetics followed a pseudo-second-order model and Langmuir isotherm model adequately depicted the isotherm adsorption process. Thermodynamic analysis showed that the adsorption of the three metal ions was an endothermic process and that increasing the temperature was conducive to this adsorption.     

Removal of heavy‐metal ions by magnetic beads containing triazole chelating groups

The aim of this study was to prepare magnetic beads that could be used for the removal of heavy‐metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [m‐poly(EGDMA–VTAZ)] beads were produced by suspension polymerization in the presence of a magnetite Fe₃O₄ nanopowder. The specific surface area of the m‐poly(EGDMA–VTAZ) beads was 74.8 m²/g with a diameter range of 150–200 μm, and the swelling ratio was 84%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA–VTAZ) beads was 14.8%. The maximum binding capacities of the m‐poly(EGDMA–VTAZ) beads from aquous solution were 284.3 mg/g for Hg²⁺, 193.8 mg/g for Pb²⁺, 151.5 mg/g for Cu²⁺, 128.1 mg/g for Cd²⁺, and 99.4 mg/g for Zn²⁺. The affinity order on a mass basis was Hg²⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺> Zn²⁺. The binding capacities from synthetic waste water were 178.1 mg/g for Hg²⁺, 132.4 mg/g for Pb²⁺, 83.5 mg/g for Cu²⁺, 54.1 mg/g for Cd²⁺, and 32.4 mg/g for Zn²⁺. The magnetic beads could be regenerated (up to ca. 97%) by a treatment with 0.1M HNO₃. These features make m‐poly(EGDMA–VTAZ) beads potential supports for heavy‐metal removal under a magnetic field. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Microwave preparation and adsorption properties of EDTA‐modified cross‐linked chitosan

A novel chitosan‐based adsorbent (CCTE) was synthesized by the reaction between epichlorohydrin O‐cross‐linked chitosan and EDTA dianhydride under microwave irradiation (MW). The chemical structure of this new polymer was characterized by infrared spectra analysis, thermogravimetric analysis, and X‐ray diffraction analysis. The results were in agreement with the expectations. The static adsorption properties of the polymer for Pb²⁺, Cu²⁺, Cd²⁺, Ni²⁺, and Co²⁺ were investigated. Experimental results demonstrated that the CCTE had higher adsorption capacity for the same metal ion than the parent chitosan and cross‐linked chitosan. In particular, the adsorption capacities for Pb²⁺ and Cd²⁺ were 1.28 mmol/g and 1.29 mmol/g, respectively, in contrast to only 0.372 mmol/g for Pb²⁺ and 0.503 mmol/g for Cd²⁺ on chitosan. Kinetic experiments indicated that the adsorption of CCTE for the above metal ions achieved the equilibrium within 4 h. The desorption efficiencies of the metal ions on CCTE were over 93%. Therefore, CCTE is an effective adsorbent for the removal and recovery of heavy metal ions from industrial waste solutions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thiourea modified hyper‐crosslinked polystyrene resin for heavy metal ions removal from aqueous solutions

A hyper‐crosslinked resin chemically modified with thiourea (TM‐HPS) was synthesized, characterized, and evaluated for the removal of heavy metal ions (Pb²⁺, Cd²⁺, and Cu²⁺) from aqueous solutions. The structural characterization results showed that a few thiourea groups were grafted on the surface of the resin with a big BET surface area and a large number of narrow micropores. Various experimental conditions such as pH, contact time, temperature, and initial metal concentration of the three heavy metal ions onto TM‐HPS were investigated systematically. The results indicated that the prepared resin was effective for the removal of the heavy metal ions from aqueous solutions. The isotherm data could be better fitted by Langmuir model, yielding maximum adsorption capacities of 689.65, 432.90, and 290.69 mg/g for Pd²⁺, Cd²⁺, and Cu²⁺, respectively. And the adsorption kinetics of the three metal ions followed the pseudo‐second‐order equation. FTIR and XPS analysis of TM‐HPS before and after adsorption further revealed that the adsorption mechanism could be a synergistic effect between functional groups and metal ions and electrostatic attraction, which may provide a new insight into the design of highly effective adsorbents and their potential technological applications for the removal of heavy metal ions from aqueous solutions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45568.     

Competitive Adsorption of Ag+, Pb2+, Ni2+, and Cd2+ Ions on Vermiculite

Competitive adsorption of Ag⁺, Pb²⁺, Ni²⁺, and Cd² ions on vermiuculite in a binary, ternary, and quaternary mixture was investigated in batch experiments. The effects of the presence of Ag⁺, Ni²⁺, and Cd²⁺ ions on the adsorption of Pb²⁺ ions were investigated in terms of the equilibrium isotherm. Experimental results indicated that Pb²⁺ ions always favorably adsorbed on vermiculite over Ag⁺, Ni²⁺, and Cd²⁺ ions. The adsorption equilibrium data of Pb²⁺ ions better fitted the Langmuir model than the Freundlich model. The results showed that the pseudo-second-order kinetics model was in good agreement with the experimental results for all metal ions, and the adsorption rate among the metal ions followed Ag⁺ > Pb²⁺ > Ni²⁺ > Cd²⁺. The desorption and regenration study indicated that vermiculite can be used repeatedly and be suitable for the design of a continuous process.     

Competitive adsorption of heavy metal ions (Pb2+, Cu2+, and Ni2+) onto date seed biochar: batch and fixed bed experiments

In a multicomponent systems, the adsorption of Pb²⁺, Cu²⁺, and Ni²⁺ by date seed biochar exhibited competitive behavior. Compared to single component systems, the adsorption capacities of each ion were reduced by 48–75% in both batch and column experiments. Surface complexation with carboxyl and hydroxyl functional groups played a major role in the removal mechanism. Ion exchange mechanism accounted for 37–40% of the total adsorption compared to 57–72% in single component systems. Modified Langmuir isotherm best described the systems. Adsorption capacities and selectivity follow the order: Pb²⁺> Cu²⁺> Ni²⁺. Multi-stage sequences system is recommended to avoid premature exhaustion of biochar.     

Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

Removal of metal ions using lignite in aqueous solution—Low cost biosorbents

Turkish lignite can be used as a new adsorption material for removing some toxic metals from aqueous solution. The adsorption of lignite (brown young coals) to remove copper (Cu²⁺), lead (Pb²⁺), and nickel (Ni²⁺) from aqueous solutions was studied as a function of pH, contact time, metal concentration and temperature. Adsorption equilibrium was achieved between 40 and 70 min for all studied cations except Pb²⁺, which is between 10 and 30 min. The adsorption capacities are 17.8 mg/g for Cu²⁺, 56.7 mg/g for Pb²⁺, 13.0 mg/g for Ni²⁺ for BC₁ (Ilg?n lignite) and 18.9 mg/g for Cu²⁺, 68.5 mg/g for Pb²⁺, 12.0 mg/g for Ni²⁺ for BC₂ (Beysehir lignite) and 7.2 mg/g for Cu²⁺, 62.3 mg/g for Pb²⁺, 5.4 mg/g for Ni²⁺ for AC (activated carbon). More than 67% of studied cations were removed by BC₁ and 60% BC₂, respectively from aqueous solution in single step. Whereas about 30% of studied cations except Pb²⁺, which is 90%, were removed by activated carbon. Effective removal of metal ions was demonstrated at pH values of 3.8–5.5. The adsorption isotherms were measured at 20 °C, using adsorptive solutions at the optimum pH value to determine the adsorption capacity. The Langmuir adsorption isotherm was used to describe observed sorption phenomena. The rise in temperature caused a slight decrease in the value of the equilibrium constant (K_c) for the sorption of metal ions. The mechanism for cations removal by the lignite includes ion exchange, complexation and sorption. The process is very efficient especially in the case of low concentrations of pollutants in aqueous solution, where common methods are either economically unfavorable or technically complicated.     

Heavy Metal Adsorption by Magnetic Hybrid-Sorbent: An Experimental and Theoretical Approach

This study examined the sorption and desorption behaviors of Cu²⁺ and Pb²⁺ ions, which were adsorbed on the vinyl benzene chloride divinylbenzene (VBC-DVB-OH) polymer and magnetic hybrid adsorbent (VBC-DVB-OH-Fe) at pH 5. Batch and fixed bed column experiments were performed to study practical applicability and the breakthrough curves were obtained. The experimental equilibrium data, suitably fitted by the Langmuir and Freundlich isotherms, have shown that ferric oxide loaded magnetic hybrid sorbent (VBC-DVB-OH-Fe) exhibits higher adsorption capacity than vinyl benzene chloride divinylbenzene (VBC-DVB-OH) polymer. The results indicate the following order to fit the isotherms for both metal ions: Langmuir > Freundlich for polymeric sorbent and Freundlich > Langmuir for VBC-DVB-OH-Fe. The maximum adsorption capacity of VBC-DVB-OH adsorbent is 26.39 mg/g for Pb²⁺ and 7.93 mg/g for Cu²⁺ whereas it is increased to 45.81 mg/g for Pb²⁺and 25.64 mg/g for Cu²⁺ by using VBC-DVB-OH-Fe adsorbent. A series of column experiments were carried out to determine the breakthrough curves. The regeneration efficiency of the column runs was determined using HCl (10% v/v). The elution efficiency was 90% for each adsorbent.     

Functionalized nanostructured silica by tetradentate-amine chelating ligand as efficient heavy metals adsorbent : Applications to industrial effluent treatment

Organofunctionalized nanostructured silica SBA-15 with tri(2-aminoethyl)amine tetradentate-amine ligand was synthesized and applied as adsorbent for the removal of Cu²⁺, Pb²⁺, and Cd²⁺ from both synthetic wastewater and real paper mill and electroplating industrial effluents. The prepared materials were characterized by XRD, N₂ adsorption-desorption, TGA, and FT-IR analysis. The Tren-SBA-15 was found to be a fast adsorbent for heavy metal ions from single solution with affinity for Cu²⁺, Pb²⁺, than for Cd²⁺ due to the complicated impacts of metal ion electronegativity. The kinetic rate constant decreased with increasing metal ion concentration due to increasing of ion repulsion force. The equilibrium batch experimental data is well described by the Langmuir isotherm. The maximum adsorption capacity was 1.85 mmol g^?1 for Cu²⁺, 1.34 mmol g^?1 for Pb²⁺, and 1.08 mmol g^?1 for Cd²⁺ at the optimized adsorption conditions (pH=4, T=323 K, t=2 h, C₀=3 mmol L^?1, and adsorbent dose=1 g L^?1). All Gibbs energy was negative as expected for spontaneous interactions, and the positive entropic values from 103.7 to 138.7 J mol^?1 K^?1 also reinforced this favorable adsorption process in heterogeneous system. Experiment with real wastewaters showed that approximately a half fraction of the total amount of studied metal ions was removed within the first cycle of adsorption. Hence, desorption experiments were performed by 0.3M HCl eluent, and Tren-SBA-15 successfully reused for four adsorption/desorption cycles to complete removal of metal ions from real effluents. The regenerated Tren-SBA-15 displayed almost similar adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ even after four recycles. The results suggest that Tren-SBA-15 is a good candidate as an adsorbent in the removal of Cu²⁺, Pb²⁺, and Cd²⁺ from aqueous solutions.     

Use of super absorbent hydrogels derivative from acrylamide with itaconic acid and itaconates to remove metal ions from aqueous solutions

Poly(acrylamide-co-itaconic acid) (AAm/IA) and poly(acrylamide-co-monomethoxyethyl itaconate) (AAm/MEI) hydrogels (HGs) synthesized at different molar ratios were used to study the adsorption of some metal ions as Cu²⁺, Ni²⁺, Pb²⁺, Cd²⁺, and Fe³⁺ in aqueous solutions at different concentration: 10, 50, 100, 500, and 1000 mg L⁻¹. Statistical analysis was performed and the effect of the metal ion, ion concentration, and hydrogel (HG) composition, on adsorption and adsorption efficiency, was evaluated for both HGs studied (AAm/IA and AAm/MEI) and each factor gave rise to significant differences (P ≤ 0.05). The adsorption depends on the type of ion, its concentration, and also influenced by the type and composition of the HGs. For each system the adsorption efficiencies for all ions were similar with exception of Fe³⁺, which showed the highest adsorption efficiency in AAm/MEI HG, but the less for the AAm/IA. For both systems, the maximum adsorption efficiency was observed when the molar ratio AAm/IA or AAm/MEI is 80/20. When the adsorption was carried out with individual ions, AAm/MEI HG was more efficient than AAm/IA. For a multielement sample of Cu²⁺, Ni²⁺, Pb²⁺, and Cd²⁺, both HGs could adsorb all the ions and their behavioral trend was the same in both cases, in which the adsorption efficiency was Pb²⁺ > Cu²⁺ > Cd²⁺ > Ni²⁺. The results of the statistical analysis evidence the advantage of its use in this type of studies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46999     

Competitive Removal of Heavy Metal Ions by Starch-Graft-Acrylic Acid Copolymers

Graft copolymerization of acrylic acid (AA) onto starch was carried out with ceric ammonium nitrate as initiator under nitrogen atmosphere. The structures of the synthesized graft copolymers were identified by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The grafting percentages (GP%) of starch-graft-acrylic acid (S-g-AA) copolymers were determined. Increasing the molar concentration of AA from 0.1 to 0.5 mol/L caused a significant increase in the GP%. The effect of GP% of S-g-AA copolymers on the competitive removal of Pb²⁺, Cu²⁺, Cd²⁺ ions from aqueous solution was investigated at pH 4.5. The concentrations of each ion in aqueous solution were equal to each other, which were kept constant at 4 mmol/L. Metal ion removal capacities were determined by atomic absorption spectrophotometer (AAS). Metal ion removal capacities of S-g-AA copolymers rose with the increase in GP% of the copolymers and the order of the removal of heavy metal ions was Pb²⁺ > Cu²⁺ > Cd²⁺.     

Synthesis of sulfhydryl chitin and its adsorption properties for heavy metal ions

This article discusses the preparation of the water‐insoluble adsorbent sulfhydryl chitin (s‐chitin), by treatment of the chitin with sulfhydryl acetic acid in the presence of sulfuric acid as a catalyst. Its structure was confirmed by elemental analysis, FTIR spectra analysis and near‐IR spectra analysis. We also investigated the adsorption properties of sulfhydryl chitin for Cu^II, Cd^II, Pb^II, Cr^III, and Ni^II. Based on the research results of adsorption capacity, the effect of pH value on adsorption, adsorption kinetics experiments, and selective adsorption experiments were observed. It has been shown that the s‐chitin has much better adsorption for Pb^II, Cu^II, and Cd^II than chitin itself. The adsorption capacities of s‐chitin for Pb^II, Cu^II, and Cd^II were 108.3, 94.7, and 57.1 mg/g, respectively. It also had good adsorption properties for heavy metal ions. The adsorption capacities were also affected by the acidity of medium. The adsorbed Cu^II, Cd^II, and Pb^II could be eluted by diluted chlorhydric acid. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 151–155, 2000