Resorcin[4]arene‐Derived Mono‐ and Diphosphines in Suzuki Cross‐Coupling

Three resorcin[4]arene cavitands ( 1 – 3 ) having either one or two resorcinolic C‐2 atoms substituted by a  CH₂PPh₂ podand arm were assessed in the Suzuki arylation of aryl bromides with phenylboronic acid. Using P:Pd ratios of 2:1 and operating in dioxane at 100 °C with a catalyst loading of 0.001 mol% resulted in highly efficient catalytic systems. For example, TOFs up to 34570 mol(converted ArBr)⋅mol(Pd)⁻¹⋅h⁻¹ were obtained with the proximally‐disubstituted cavitand 3 when using 4‐bromotoluene as substrate. The performance was shown to vary in the following order: monophosphine 1 <diphosphine 2 <diphosphine 3 (where 2 is the distally disubstituted cavitand). A comparison of the catalytic properties of monophosphine‐cavitand 1 with those of benzyldiphenylphosphine and o‐anisylmethyldiphenyl phosphine suggests that 1 functions as a hemilabile phosphine, the oxygen atoms close to the phosphorus atom behaving as donors able to temporarily increase the electron density on the metal and/or favour the formation of mono‐ligand Pd(0) species.     

Synthesis,characterization, and catalytic behavior of copper complexes with fluorosubstituted β‐ketoimine ligands

A series of β‐ketoimine ligands with various fluorine substitutions on the N‐aryl ring and the corresponding copper complexes were synthesized. The fluorosubstituents exerted significant effects on the structures and catalytic activities of the copper complexes. X‐ray diffraction revealed that the copper(II) central ions were coordinated by two trans‐oriented β‐ketoimino ligands with delocalized double bonds. Complex 2b (with mono‐o‐fluorosubstitution on the N‐aryl moiety) adopted a central symmetric square planar structure, whereas complex 2f (with bis‐o‐fluorosubstitution) had a distorted square planar structure with a dihedral angle of 28.2°. The Cu? N bond length in 2f was appreciably shorter than that in 2b . When activated by modified methylaluminoxane, the copper complexes effectively polymerized methyl acrylate. Furthermore, substitution with more fluorine atoms resulted in a higher activity. The catalytic activity of the pentafluorosubstituted complex 2h reached 57.5 kg (mol of Cu)^?1·h^?1 under optimized conditions; this was the highest value reported up to this point for copper complexes in acrylic monomer polymerization. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41178.     

Thiosemicarbazone Salicylaldiminato‐Palladium(II)‐Catalyzed Mizoroki–Heck Reactions

Four tridentate thiosemicarbazone salicylaldiminato‐palladium(II) complexes of the general formula [Pd(saltsc‐R)PPh₃] [saltsc=salicylaldehyde thiosemicarbazone; R=H ( 1 ), 3‐tert‐butyl ( 2 ), 3‐methoxy ( 3 ), 5‐chloro ( 4 )], have been evaluated as catalyst precursors for the Mizoroki–Heck coupling reaction between a variety of electron‐rich and electron‐poor aryl halides and olefins. The palladium complexes (0.1–1 mol% loading) were found to effectively catalyze these reactions with high yields being obtained when aryl iodides and aryl bromides were utilized. The effects of base, catalyst loading, reaction temperature and reaction time on the catalytic activity of the most active complex were also investigated.     

Phenoxaphosphino‐Modified Xantphos‐Type Ligands in the Rhodium‐Catalysed Hydroformylation of Internal and Terminal Alkenes

The solubility of the modifying ligand is an important parameter for the efficiency of a rhodium‐catalysed hydroformylation system. A facile synthetic procedure for the preparation of well‐defined xanthene‐type ligands was developed in order to study the influence of alkyl substituents at the 2‐, and 7‐positions of the 9,9‐dimethylxanthene backbone and at the 2‐, and 8‐positions of the phenoxaphosphino moiety of ligands 1 – 16 on solubility in toluene and the influence of these substituents on the performance of the ligands in the rhodium‐catalysed hydroformylation. An increase in solubility from 2.3 mmol⋅L⁻¹ to >495 mmol⋅L⁻¹ was observed from the least soluble to the most soluble ligand. A solubility of at least 58 mmol⋅L⁻¹ was estimated to be sufficient for a large‐scale application of these ligands in hydroformylation. Highly active and selective catalysts for the rhodium‐catalysed hydroformylation of 1‐octene and trans‐2‐octene to nonanal, and for the hydroformylation of 2‐pentene to hexanal were obtained by employing these ligands. Average rates of >1600 (mol aldehyde) × (mol Rh)⁻¹×h⁻¹ {conditions: p(CO/H₂) = 20 bar, T = 353 K, [Rh] = 1 mM, [alkene] = 637 mM} and excellent regio‐selectivities of up to 99% toward the linear product were obtained when 1‐octene was used as substrate. For internal olefins average rates of >145 (mol aldehyde)×(mol Rh)⁻¹×h⁻¹ {p(CO/H₂) = 3.6–10 bar, T = 393 K, [Rh] = 1 mM, [alkene] = 640–928 mM} and high regio‐selectivities up to 91% toward the linear product were obtained.     

Synthesis of chitosan‐graft‐poly[2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate] copolymer from a novel monomer,prepared using a Morita–Baylis–Hillman reaction,and characterization of its antimicrobial activity

A novel method has been developed to modify the natural polymer chitosan. The process utilizes a monomer prepared by employing a Morita–Baylis–Hillman (MBH) reaction. Specifically, the vinyl monomer 2‐[hydroxy(pyridin‐3‐yl)methyl]acrylonitrile (HPA) was synthesized using a high‐yielding MBH reaction of acrylonitrile with pyridine‐3‐carboxaldehyde in the presence of 1,4‐diazabicyclo[2.2.2]octane. Conversion of HPA to 2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate (CPA) was then carried out by reaction of acryloyl chloride. The highly functionalized monomer CPA was grafted onto chitosan through a reaction in 2% acetic acid containing a persulfate and a sulfite (K₂S₂O₈/Na₂SO₃) as redox promoter. An optimal grafting percentage of 123% is obtained when the grafting process is conducted at 60 °C for 4 h employing a 1:0.5 ratio of K₂S₂O₈ and Na₂SO₃ at a concentration of 2.5 × 10^?3 mol L^?1. Chitosan‐graft‐poly[2‐cyano‐1‐(pyridin‐3‐yl)allyl acrylate] graft copolymers, having various grafting percentages, were characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopies, X‐ray diffraction, thermogravimetric analysis and scanning electron microscopy. Finally, the results of studies probing the antimicrobial activities of the polymers against selected microorganisms show that the graft copolymers display higher growth inhibition activities against bacteria and fungi than does chitosan. © 2014 Society of Chemical Industry     

Pyranoside Phosphite‐Oxazoline Ligand Library: Highly Efficient Modular P,N Ligands for Palladium‐Catalyzed Allylic Substitution Reactions. A Study of the Key Palladium Allyl Intermediates

We have screened a library of modular phosphite‐oxazoline ligands for asymmetric allylic substitution reactions. The library is efficiently prepared from the commercially available and cheap D ‐glucosamine. The introduction of a phosphite moiety into the ligand design is highly advantageous for the product outcome. Therefore, this ligand library affords good‐to‐excellent reaction rates [TOFs up to 600 mol substrate×(mol Pd×h)⁻¹] and enantioselectivities (ees up to 99%) and, at the same time, shows a broad scope for mono‐, di‐ and trisubstituted linear hindered and unhindered substrates and cyclic substrates. The NMR studies on the palladium allyl intermediates provide a deeper understanding about the effect of the ligand parameters on the origin of enantioselectivity.     

Ruthenium(II)‐Catalyzed Regioselective Synthesis of Allyl Ketones from Alkynes and their Silver(I)‐Catalyzed Hydroarylation into γ‐Functionalized Ketones

The regioselective synthesis of β,γ‐unsaturated ketones from terminal alkynes is achieved by cooperative action of tris(acetonitrile)pentamethylcyclopentadieneruthenium hexafluorophosphate [Cp*Ru(NCMe)₃⁺ PF₆⁻] and para‐toluenesulfonic acid catalysts. These allyl ketones undergo direct regioselective hydroarylation/Friedel–Crafts reaction to introduce an electron‐rich aryl group at the γ‐position in the presence of ligand‐free silver triflate (AgOTf) catalyst. Both catalytic reactions take place with atom economy and provide an alternative to the synthesis of a variety of allyl ketones and γ‐arylated ketones.     

Pyridin‐, Quinolin‐ and Acridinylidene Palladium Carbene Complexes as Highly Efficient C–C Coupling Catalysts

A series of four new complexes bearing N‐heterocyclic carbene ligands (NHCs) as well as four compounds bearing N‐heterocyclic carbene ligands with remote heteroatoms (rNHCs) of the general types [(NHC)(PPh₃)₂PdCl]⁺BF₄⁻ and [(rNHC)(PPh₃)₂PdCl]⁺BF₄⁻, respectively, have been prepared in high yields. Crystal and molecular structures have been determined for four representative examples. These compounds proved to be efficient catalysts for aryl coupling reactions of the Heck and Suzuki types (reaching TONs of as high as 6,200,000). Both aryl bromides and aryl chlorides can be used as substrates. Like the well known mixed, standard (NHC)(phosphine) compounds, the new six‐numbered, one‐N‐heterocyclic carbene complexes (and in particular certain rNHC‐containing ones) also combine the advantageous stability of bis(carbene) and the high activity of bis(phosphine) complexes. Furthermore, their good catalytic performance and, especially, their easy synthesis based on cheap and commercially available starting materials, make them by far superior when compared to the mixed (NHC)(phosphine) catalysts known thus far.     

Sulfonated N‐Heterocyclic Carbenes for Pd‐Catalyzed Sonogashira and Suzuki–Miyaura Coupling in Aqueous Solvents

The reactions of the N,N′‐diarylimidazolium and N,N′‐diarylimidazolinium salts with chlorosulfonic acid result in the formation of the respective disulfonated N‐heterocyclic carbene (NHC) precursors in reasonable yields (46–77%). Water‐soluble palladium catalyst complexes, in situ obtained from the respective sulfonated imidazolinium salt, sodium tetrachloropalladate (Na₂PdCl₄) and potassium hydroxide (KOH) in water, were successfully applied in the copper‐free Sonogashira coupling reaction in isopropyl alcohol/water mixtures using 0.2 mol% catalyst loading. The preformed (disulfonatedNHC)PdCl(cinnamyl) complex was used in aqueous Suzuki–Miyaura reactions at 0.1 mol% catalyst loading. The coupling protocol reported here is very useful for Sonogashira reactions of N‐ and S‐heterocyclic aryl bromides and chlorides with aryl‐ and alkylacetylenes.     

Recoverable Palladium Catalysts for Suzuki–Miyaura Cross‐ Coupling Reactions Based on Organic‐Inorganic Hybrid Silica Materials Containing Imidazolium and Dihydroimidazolium Salts

The systems formed by palladium acetate [Pd(OAc)₂] and hybrid silica materials prepared by sol‐gel from monosilylated imidazolium and disilylated dihydroimidazolium salts show catalytic activity in Suzuki–Miyaura cross‐couplings with challenging aryl bromides and chlorides. They are very efficient as recoverable catalysts with aryl bromides. Recycling is also possible with aryl chlorides, although with lower conversions. In situ formation of palladium nanoparticles has been observed in recycling experiments.     

Mechanistic Studies on the Palladium‐Catalyzed Direct C‐5 Arylation of Imidazoles: The Fundamental Role of the Azole as a Ligand for Palladium

An in‐depth mechanistic study on the palladium‐catalyzed direct arylation of imidazoles at the C‐5 position is presented. The interactions of triphenylphosphine (PPh₃)‐ligated aryl‐Pd species with 1,2‐dimethyl‐1H‐imidazole (dmim) have been studied in detail. In contrast with previous suggestions, phosphine‐ligated organo‐Pd species are not active and the reaction proceeds through imidazole‐ligated organo‐Pd intermediates. The kinetics of the oxidative addition of aryl halides with dmim‐ligated Pd(0) species have been characterized in a Pd(dba)₂/dmim model system. A thorough study of the equilibria involving novel [ArPd(dmim)₂X] complexes (X=I, OAc) and the unexpected cationic [ArPd(dmim)₃]⁺ is also reported. The ability of these species to effect the C H arylation of dmim at room temperature in the presence of acetate is also demonstrated.

     

Homogeneous liquid–liquid extraction using perfluorooctanesulfonic acid and calcium and its application to the separation and recovery of vitamin B12

A new phase separation phenomenon was observed in which the perfluorooctanesulfonate ion (PFOS⁻) and calcium ion form an ion‐pair associator and the sedimented liquid phase occurs from the homogeneous aqueous solution. This phenomenon was observed in the neutral pH region at room temperature (25 °C). The optimum concentration conditions for the reagents were [PFOS⁻]_T = 7 × 10⁻³ mol dm^‐3 and [Ca²⁺]_T = 1.1 mol dm^‐3. When these findings were applied to the homogeneous liquid–liquid extraction of vitamin B₁₂, the extraction percentage (E) was 83% and the concentration ratio (ie V_a/V_s, where V_a is the volume of the aqueous phase and V_s is the volume of the sedimented liquid phase) was a maximum of 149. The recovery of vitamin B₁₂ was achieved by adding the propanol–acetone (20 : 80 v/v%) mixed solvent to the sedimented liquid phase; the vitamin B₁₂ precipitated and was filtered. Both the PFOS⁻ and Ca²⁺ were removed by dissolution in the mixed solvent. The recovery percentage of vitamin B₁₂ was 78%. © 1999 Society of Chemical Industry     

“Click” Polymer‐Supported Palladium Nanoparticles as Highly Efficient Catalysts for Olefin Hydrogenation and Suzuki Coupling Reactions under Ambient Conditions

Complexation of palladium(II) acetate [Pd(OAc)₂] or dipotassium tetrachloropalladate [K₂PdCl₄] to “click” polymers functionalized with phenyl, ferrocenyl and sodium sulfonate groups gave polymeric palladium(II)‐triazolyl complexes that were reduced to “click” polymer‐stabilized palladium nanoparticles (PdNPs). Transmission electron microscopy (TEM) showed that reduction using sodium borohydride (NaBH₄) produced PdNPs in the 1–3 nm range of diameters depending on the nature of the functional group, whereas slow reduction using methanol yielded PdNPs in the 22–25 nm range. The most active of these PdNPs (0.01% mol Pd), stabilized by poly(ferrocenyltriazolylmethyl)styrene, catalyzed the hydrogenation of styrene at 25 °C and 1 atm hydrogen, with turnover numbers (TONs) of 200,000. When stabilized by the water‐soluble poly(sodium sulfonate‐triazolylmethyl)styrene, the PdNPs (0.01% mol Pd) catalyze the Suzuki–Miyaura coupling between iodobenzene (PhI) and phenylboronic acid [PhB(OH)₂] in water/ethanol (H₂O/EtOH) at 25 °C with TONs of 8,200. This high catalytic activity is comparable to that obtained with “click” dendrimer‐stabilized PdNPs under ambient conditions.     

Gold‐cyanide biosorption with L‐cysteine

L ‐Cysteine increased gold‐cyanide biosorption by protonated Bacillus subtilis, Penicillium chrysogenum and Sargassum fluitans biomass. At pH 2, the maximum Au uptakes were 20.5 µmol g⁻¹, 14.2 µmol g⁻¹ and 4.7 µmol g⁻¹ of Au, respectively, approximately 148–250% of the biosorption performance in the absence of cysteine. Au biosorption mainly involved anionic AuCN₂⁻ species adsorbed by ionizable functional groups on cysteine‐loaded biomass carrying a positive charge when protonated [(biomass–cysteine–H⁺)–(AuCN₂⁻)]. Deposited gold could be eluted from Au‐loaded biomass at pH 3–5. The elution efficiencies were higher than 92% at pH 5.0 with the Solid‐to‐Liquid ratio, S/L, = 4. Increasing solution ionic strength (NaNO)₃ decreased Au uptake. FTIR analyses indicated that the main functional groups involved in gold biosorption in the presence of L ‐cysteine are probably N‐, S‐ and O‐containing groups. The present results confirm that certain waste microbial biomaterials are capable of effectively removing and concentrating gold from solutions containing residual cyanide if applied under appropriate conditions. © 2000 Society of Chemical Industry     

Cobalt(II) and nickel(II) complexes bearing mono(imino)pyridyl and bis(imino)pyridyl ligands: preparation,structure and ethylene polymerization/oligomerization behaviors

BACKGROUND: Ethylene oligomerization is the major industrial process to produce linear α‐olefins. Recently much work has been devoted to late transition metal catalysts used in this process, especially those with 2,6‐bis(imino)pyridyl dihalide ligands. Considering that most work has focused on simple modification to the substituents in imino‐aryl rings based on the symmetric bis(imino)pyridyl framework, here we expand this work to the asymmetric mono(imino)pyridyl ligands. RESULTS: The preparation, structure and ethylene polymerization/oligomerization behavior of series of mono(imino) pyridyl–MCl₂ and bis(imino)pyridyl–MX_n complexes are presented. The systematic studies were focused on the relationship between the catalytic behavior of these complexes for ethylene polymerization/oligomerization and reaction conditions, ligand structures, metal centers and counter‐anions. The influence of the coordination environment on catalyst behavior is also discussed. CONCLUSION: For mono(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the Cl^? counter‐anion, good activities ranging from 0.513 × 10⁵ to 1.58 × 10⁵ g polyethylene (mol metal)^?1 h^?1 atm^?1 are afforded, and the most active catalysts are those with methyl in both ortho‐ and para‐positions of the imine N‐aryl ring. For bis(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the SO₄^2? and NO₃^? counter‐anions, the low activities for ethylene oligomerization are in sharp contrast to those of their chloride analogues. Copyright © 2009 Society of Chemical Industry     

Rhodium‐Catalyzed Enantioselective Intramolecular [4+2] Cycloaddition using a Chiral Phosphine‐Phosphite Ligand: Importance of Microwave‐Assisted Catalyst Conditioning

The use of modular α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol (TADDOL)‐ and 1,1′‐bi‐2‐naphthol (BINOL)‐derived phosphine‐phosphite ligands (L₂*) in the asymmetric rhodium‐catalyzed intramolecular [4+2] cycloaddition (“neutral” Diels–Alder reaction) of (E,E)‐1,6,8‐decatriene derivatives (including a 4‐oxa and a 4‐aza analogue) was investigated. Initial screening of a small ligand library led to the identification of a most promising, TADDOL‐derived ligand bearing a phenyl group adjacent to the phosphite moiety at the arene backbone. In the course of further optimization studies, the formation of a new, more selective catalyst species during the reaction time was observed. By irradiating the pre‐catalyst with microwaves prior to substrate addition high enantioselectivities (up to 93% ee) were achieved. The new cyclization protocol was successfully applied to all three substrates investigated to give the bicyclic products in good yield and selectivity. ³¹P NMR and ESI‐MS measurements indicated the formation of a [Rh(L₂*)₂]⁺ species as the more selective (pre‐) catalyst.     

Investigation of Dynamic Intra‐ and Intermolecular Processes within a Tether‐Length Dependent Series of Group 4 Bimetallic Initiators for Stereomodulated Degenerative Transfer Living Ziegler–Natta Propene Polymerization

The series of bimetallic complexes, [(η⁵‐C₅Me₅)Zr(Me)₂]₂ [N(t‐Bu)C(Me)N (CH₂)_n NC(Me)N(t‐Bu)] 3 (n=8), 4 (n=6), and 5 (n=4) were prepared in high yield through a simple, one‐pot synthesis involving 2 equiv. of in situ generated (η⁵‐C₅Me₅)Zr(Me)₃ and the corresponding bis‐carbodiimide, (t‐Bu)NCN (CH₂)_n NCN(t‐Bu). Compounds 3 – 5 were found to be highly isoselective for the living Ziegler–Natta polymerization of propene upon 100% activation using 2 equiv. of the borate co‐initiator, [PhNHMe₂] [B(C₆F₅)₄] ( 2 ), with the degree of stereoselectivity decreasing slightly as the two metal centers are brought closer together [cf., 3 (σ=0.92)> 4 (σ=0.91)> 5 (σ=0.89)]. Under conditions of sub‐stoichiometric activation by 2 , all three bimetallic initiators, 3 – 5 , were found to engage in degenerative transfer living Ziegler–Natta polymerization involving rapid and reversible methyl group transfer between active, (cationic) and dormant, (neutral) methyl, polymeryl zirconium centers. Under these conditions, the frequency of mr triad stereoerror incorporation into the polypropene (PP) microstructure decreases as the two metal centers are brought closer together as a result of increasing barriers for metal‐centered epimerization within the neutral metal site due to correspondingly greater non‐bonded steric interactions vis‐à‐vis mononuclear 1 .     

Palladium(II)‐Catalyzed 1,4‐Addition of Arylboronic Acids to β‐Arylenones for Enantioselective Synthesis of 4‐Aryl‐4H‐chromenes

The enantioselective 1,4‐addition of arylboronic acids to β‐arylenones to give β‐diaryl ketones was carried out at 0–25 °C in the presence of a dicationic palladium(II) catalyst, [Pd(S,S‐chiraphos)(PhCN)₂](SbF₆)₂. Addition of a silver salt such as silver tetrafluoroborate [AgBF₄] or silver hexafluoroantimonate [AgSbF₆] (5–10 mol %) was effective to achieve high enantioselectivities at low temperatures (92–99 % ee) and to reduce the catalyst loading to 0.05 mol %. The protocol provided a simple access to 4‐aryl‐4H‐chromenes. Optically active chromenes were synthesized with up to 99 % ee via dehydration of the 1,4‐adducts between arylboronic acids and β‐(2‐hydroxyaryl)‐α,β‐unsaturated ketones.     

Exploring the Potential of Norbornene‐Modified Mannosamine Derivatives for Metabolic Glycoengineering

Metabolic glycoengineering (MGE) allows the introduction of unnaturally modified carbohydrates into cellular glycans and their visualization through bioorthogonal ligation. Alkenes, for example, have been used as reporters that can react through inverse‐electron‐demand Diels–Alder cycloaddition with tetrazines. Earlier, norbornenes were shown to be suitable dienophiles; however, they had not previously been applied for MGE. We synthesized two norbornene‐modified mannosamine derivatives that differ in the stereochemistry at the norbornene (exo/endo linkage). Kinetic investigations revealed that the exo derivative reacts more than twice as rapidly as the endo derivative. Through derivatization with 1,2‐diamino‐4,5‐methylenedioxybenzene (DMB) we confirmed that both derivatives are accepted by cells and incorporated after conversion to a sialic acid. In further MGE experiments the incorporated sugars were ligated to a fluorophore and visualized through confocal fluorescence microscopy and flow cytometry.     

Oxadiazoline and Ketoimine Palladium(II) Complexes as Highly Efficient Catalysts for Suzuki–Miyaura Cross‐Coupling Reactions in Supercritical Carbon Dioxide

The [2+3] cycloaddition of nitriles (RCN) with 2,2‐dimethyl‐3,4‐dihydro‐2H‐pyrrole 1‐oxide, in the presence of palladium dichloride (PdCl₂) gives the corresponding 2,3‐dihydro[1.2.4]oxadiazole (Δ⁴‐1,2,4‐oxadiazoline) palladium(II) complexes 1 – 4 in good yields. However, the Pd(II)‐assisted reaction of pentafluorobenzonitrile with the same pyrroline N‐oxide gives a mixture of oxadiazoline 5 , ketoimine 6 and pyrrolylbenzamide‐ketoimine 7 Pd(II) complexes, which affords upon heating in refluxing acetone the unprecedented fused tricyclic ketoimine complex 8 as the exclusive product. Under heating, compounds 5 and 7 transform to 6 , the latter undergoing intramolecular cyclization by nucleophilic attack of the amino moiety to the ortho carbon of the pentafluorophenyl ring leading ultimately to 8 . The compounds were characterized by IR, ¹H and ¹³C NMR, ESI⁺‐MS, elemental analyses and, in the cases of 3 , 6 , 7 and 8 , also by X‐ray diffraction analyses. The catalytic properties of the Pd complexes were evaluated in Suzuki–Miyaura cross‐coupling reactions, using supercritical carbon dioxide (scCO₂) as a green solvent. Cross‐couplings of aryl halides with phenylboronic acid give the desired biaryl products in quantitative yields, in a short reaction time, for substrate‐to‐catalyst molar ratios as high as 4.0⋅10⁴.