Hybrid supercapacitor based on MnO2 and columned FeOOH using Li2SO4 electrolyte solution

The nano-sized columned β-FeOOH was prepared by the hydrolysis process and its electrochemical capacitance performance was evaluated for the first time in Li₂SO₄ solution. A hybrid supercapacitor based on MnO₂ positive electrode and FeOOH negative electrode in Li₂SO₄ electrolyte solution was designed. The electrochemical tests demonstrated that the hybrid supercapacitor has a energy density of 12 Wh kg⁻¹ and a power density of 3700 W kg⁻¹ based on the total weight of the electrode active materials with a voltage range 0–1.85 V. This hybrid supercapacitor also exhibits a good cycling performance and keeps 85% of initial capacity over 2000 cycles.     

Electrochemical profile of an asymmetric supercapacitor using carbon-coated LiTi2(PO4)3 and active carbon electrodes

In this work, we reported an asymmetric supercapacitor in which active carbon (AC) was used as a positive electrode and carbon-coated LiTi₂(PO₄)₃ as a negative electrode in 1 M Li₂SO₄ aqueous electrolyte. The LiTi₂(PO₄)₃/AC hybrid supercapacitor showed a sloping voltage profile from 0.3 to 1.5 V, at an average voltage near 0.9 V, and delivered a capacity of 30 mAh g⁻¹ and an energy density of 27 Wh kg⁻¹ based on the total weight of the active electrode materials. It exhibited a desirable profile and maintained over 85% of its initial energy density after 1000 cycles. The hybrid supercapacitor also exhibited an excellent rate capability, even at a power density of 1000 W kg⁻¹, it had a specific energy 15 Wh kg⁻¹ compared with 24 Wh kg⁻¹ at the power density about 200 W kg⁻¹.     

Electrochemical capacitance of NiO/Ru0.35V0.65O2 asymmetric electrochemical capacitor

A designed asymmetric hybrid electrochemical capacitor was presented where NiO and Ru_0.35V_0.65O₂ as the positive and negative electrode, respectively, both stored charge through reversible faradic pseudocapacitive reactions of the anions (OH⁻) with electroactive materials. And the two electrodes had been individually tested in 1 M KOH aqueous electrolyte to define the adequate balance of the active materials in the hybrid system as well as the working voltage of the capacitor based on them. The electrochemical tests demonstrated that the maximum specific capacitance and energy density of the asymmetric hybrid electrochemical capacitor were 102.6 F g⁻¹ and 41.2 Wh kg⁻¹, respectively, delivered at a current density of 7.5 A cm⁻². And the specific energy density decreased to 23.0 Wh kg⁻¹ when the specific power density increased up to 1416.7 W kg⁻¹. The hybrid electrochemical capacitor also exhibited a good electrochemical stability with 83.5% of the initial capacitance over consecutive 1500 cycle numbers.     

A new cheap asymmetric aqueous supercapacitor: Activated carbon//NaMnO2

A new cheap asymmetric supercapacitor based on activated carbon (AC) and NaMnO₂ as electrodes and aqueous Na₂SO₄ solution as electrolyte was assembled. It shows an energy density of 19.5 Wh kg⁻¹ at a power density of 130 W kg⁻¹ based on the total mass of the active electrode materials and an excellent cycling behavior. This asymmetric aqueous AC//NaMnO₂ capacitor is promising for practical applications due to its low price, easy preparation of NaMnO₂ and friendliness to environment.     

Hybrid supercapacitor with nano-TiP2O7 as intercalation electrode

Nano-size (≤100 nm) TiP₂O₇ is prepared by the urea assisted combustion synthesis, at 450 and 900 °C. The compound is characterized by powder X-ray diffraction, Rietveld refinement, high resolution transmission electron microscopy and surface area methods. Lithium cycling properties by way of galvanostatic cycling and cyclic voltammetry (CV) showed a reversible and stable capacity of 60 (±3) mAh g⁻¹ (0.5 mole of Li) up to 100 cycles, when cycled at 15 mA g⁻¹ between 2-3.4 V vs. Li. Non-aqueous hybrid supercapacitor, TiP₂O₇ (as anode) and activated carbon (AC) (as cathode) has been studied by galvanostatic cycling and CV in the range, 0-3 V at 31 mA g⁻¹ and exhibited a specific discharge capacitance of 29 (±1) F g⁻¹stable in the range, 100-500 cycles. The Ragone plot shows a deliverable maximum of 13 Wh kg⁻¹ and 371 W kg⁻¹ energy and power density, respectively.     

Synthesis of hydrothermally reduced graphene/MnO2 composites and their electrochemical properties as supercapacitors

Hydrothermally reduced graphene/MnO₂ (HRG/MnO₂) composites were synthesized by dipping HRG into the mixed aqueous solution of 0.1 M KMnO₄ and 0.1 M K₂SO₄ for different periods of time at room temperature. The morphology and microstructure of the as-prepared composites were characterized by field-emission scanning electron microscopy, X-ray diffraction, Raman microscope, and X-ray photoelectron spectroscopy. The characterizations indicate that MnO₂ successfully deposited on HRG surfaces and the morphology of the HRG/MnO₂ shows a three-dimensional porous structure with MnO₂ homogenously distributing on the HRG surfaces. Capacitive properties of the synthesized composite electrodes were studied using cyclic voltammetry and electrochemical impedance spectroscopy in a three-electrode experimental setup using 1 M Na₂SO₄ aqueous solution as electrolyte. The main results of electrochemical tests are drawn as follows: the specific capacitance value of HRG/MnO₂-200 (HRG dipped into the mixed solution of 0.1 M KMnO₄ and 0.1 M K₂SO₄ for 200 min) electrode reached 211.5 F g⁻¹ at a potential scan rate of 2 mV s⁻¹; moreover, this electrode shows a good cyclic stability and capacity retention. It is anticipated that the synthesized HRG/MnO₂ composites will find promising applications in supercapacitors and other devices in virtue of their outstanding characters of good cycle stability, low cost and environmentally benign nature.     

Dual functions of activated carbon in a positive electrode for MnO2-based hybrid supercapacitor

Utilizing the dual functions of activated carbon (AC) both as a conductive agent and an active substance of a positive electrode, a hybrid supercapacitor (AC-MnO₂&AC) with a composite of manganese dioxide (MnO₂) and activated carbon as the positive electrode (MnO₂&AC) and AC as the negative electrode is fabricated, which integrates approximate symmetric and asymmetric behaviors in the distinct parts of 2 V operating windows. MnO₂ in the positive electrode and AC in the negative electrode together form a pure asymmetric structure, which extends the operating voltage to 2 V due to the compensatory effect of opposite over-potentials. In the range of 0-1.1 V, both AC in the positive and negative electrode assemble as a symmetric structure via a parallel connection which offers more capacitance and less internal resistance. The optimal mass proportions of electrodes are calculated though a mathematical process. In a stable operating window of 2 V, the capacitance of AC-MnO₂&AC can reach 33.2 F g⁻¹. After 2500 cycles, maximum energy density is 18.2 Wh kg⁻¹ with a 4% loss compared to the initial cycle. The power density is 10.1 kW kg⁻¹ with an 8% loss.     

Long-term cycling behavior of asymmetric activated carbon/MnO2 aqueous electrochemical supercapacitor

Activated carbon–MnO₂ hybrid electrochemical supercapacitor cells have been assembled and characterized in K₂SO₄ aqueous media. A laboratory cell achieved 195,000 cycles with stable performance. The maximal cell voltage was 2 V associated with 21 ± 2 F g⁻¹ of total composite electrode materials (including activated carbon and MnO₂, binder and conductive additive) and an equivalent serie resistance (ESR) below 1.3 Ω cm². Long-life cycling was achieved by removing dissolved oxygen from the electrolyte, which limits the corrosion of current collectors. Scaling up has been realized by assembling several electrodes in parallel to build a prismatic cell. A stable capacity of 380 F and a cell voltage of 2 V were maintained over 600 cycles. These encouraging results show the interest of developing such devices, including non-toxic and safer components as compared to the current organic-based devices.     

A dye-sensitized photo-supercapacitor based on PProDOT-Et2 thick films

A photo-rechargeable supercapacitor (photo-supercapacitor, or PSC) is studied using a N3-dye adsorbed TiO₂ photoelectrode and PProDOT-Et₂ poly(3,3-diethyl-3,4-dihydro-2H-thieno-[3,4-b][1,4]dioxepine) polymer films as supercapacitor materials for electron storage. The PSC device, comprising a dye-sensitized solar cell (DSSC) and a supercapacitor (SC), can store the photo-to-electric energy. The PProDOT-Et₂ films are potentiostatically electropolymerized to form thick films (ca. 0.5 mm) with a specific capacitance of ca. 6.5 F cm⁻². A symmetrical (p/p) supercapacitor, with PProDOT-Et₂ coated on both electrodes, is also characterized before fabricating the three-electrode PSC. The PSC is tested under light illumination of 100 mW cm⁻², and attaining a photocharged voltage of 0.75 V and a discharged energy density of 21.3 μWh cm⁻².     

Electrochemical supercapacitor behavior of Ni3(Fe(CN)6)2(H2O) nanoparticles

Nanosized Ni₃(Fe(CN)₆)₂(H₂O) was prepared by a simple co-precipitation method. The electrochemical properties of the sample as the electrode material for supercapacitor were studied by cyclic voltammetry (CV), constant charge/discharge tests and electrochemical impedance spectroscopy (EIS). A specific capacitance of 574.7 F g⁻¹ was obtained at the current density of 0.2 A g⁻¹ in the potential range from 0.3 V to 0.6 V in 1 M KNO₃ electrolyte. Approximately 87.46% of specific discharge capacitance was remained at the current density of 1.4 A g⁻¹ after 1000 cycles.     

Characterization of MnFe2O4/LiMn2O4 aqueous asymmetric supercapacitor

A new type of asymmetric supercapacitor containing a MnFe₂O₄ negative electrode and a LiMn₂O₄ positive electrode in aqueous LiNO₃ electrolyte has been synthesized and characterized. The nanocrystalline MnFe₂O₄ anode material has a specific capacitance of 99 F g⁻¹ and the LiMn₂O₄ cathode a specific capacity of 130-100 mAh g⁻¹ under 10-100 C rate. The cell has a maximum operating voltage window of ca. 1.3 V, limited by irreversible reaction of MnFe₂O₄ toward reducing potential. The specific power and specific energy of the full-cell increase with increasing anode-to-cathode mass ratio (A/C) and saturate at A/C ∼4.0, which gives specific cell energies, based on total mass of the two electrodes, of 10 and 5.5 Wh kg⁻¹ at 0.3 and 1.8 kW kg⁻¹, respectively. The cell shows good cycling stability and exhibits significantly slower self-discharge rate than either the MnFe₂O₄ symmetric cell or the other asymmetric cells having the same cathode but different anode materials, including activated carbon fiber and MnO₂.     

Intercalation of PF6 anion into graphitic carbon with nano pore for dual carbon cell with high capacity

Intercalation property of PF₆⁻ into graphitic carbon was studied for a hybrid capacitor with different ratio of cathode and anode amount. Graphene sheet distance increased with increasing PF₆⁻ intercalation amount and it saturated at 0.4 nm at high applied potential, which is corresponded to stage 2 structure. On the other hand, it was found that nano size pore into graphene sheet was introduced at higher applied potential with 20 times larger anode carbon and this nano porous carbon shows a large capacity for intercalation capacity of 147 mAh g⁻¹. The estimated energy density of the hybrid capacitor using carbon with nano bubble structure was ca. 400 Wh kg⁻¹.     

An asymmetric anthraquinone-modified carbon/ruthenium oxide supercapacitor

An asymmetric supercapacitor with improved energy and power density, relative to a symmetric Ru oxide device, has been constructed with anthraquinone-modified carbon fabric (Spectracarb 2225) as the negative electrode and Ru oxide as the positive electrode. The performance of the supercapacitor was characterized by cyclic voltammetry and constant current discharging. Use of the anthraquinone-modified electrode extends the negative potential limit that can be used, relative to Ru oxide, and allows higher cell voltages to be used. The maximum energy density obtained was 26.7 Wh kg⁻¹ and an energy density of 12.7 Wh kg⁻¹ was obtained at a 0.8 A cm⁻² discharge rate and average power density of 17.3 kW kg⁻¹. The C-AQ/Ru oxide supercapacitor requires 64% less Ru relative to a symmetric Ru oxide supercapacitor.     

High power and high capacity cathode material LiNi0.5Mn0.5O2 for advanced lithium-ion batteries

Single-phase lithium nickel manganese oxide, LiNi_0.5Mn_0.5O₂, was successfully synthesized from a solid solution of Ni_1.5Mn_1.5O₄ that was prepared by means of the solid reaction between Mn(CH₃COO)₂·4H₂O and Ni(CH₃COO)₂·4H₂O. XRD pattern shows that the product is well crystallized with a high degree of Li–M (Ni, Mn) order in their respective layers, and no diffraction peak of Li₂MnO₃ can be detected. Electrochemical performance of as-prepared LiNi_0.5Mn_0.5O₂ was examined in the test battery by charge–discharge cycling with different rate, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The cycling behavior between 2.5 and 4.4 V at a current rate of 21.7 mA g⁻¹ shows a reversible capacity of about 190 mAh g⁻¹ with little capacity loss after 100 cycles. High-rate capability test shows that even at a rate of 6C, stable capacity about 120 mAh g⁻¹ is retained. Cyclic voltammetry (CV) profile shows that the cathode material has better electrochemical reversibility. EIS analysis indicates that the resistance of charge transfer (R_ct) is small in fully charged state at 4.4 V and fully discharged state at 2.5 V versus Li⁺/Li. The favorable electrochemical performance was primarily attributed to regular and stable crystal structure with little intra-layer disordering.     

A porous spherical aggregation of Li4Mn5O12 nanorods and its electrochemical performance

A porous spherical aggregation of Li₄Mn₅O₁₂ nanorods with the particle size of 3 μm is prepared by oxidizing LiMn₂O₄ powder with (NH₄)₂S₂O₈ under hydrothermal conditions. The result displays that concentration of (NH₄)₂S₂O₈ plays a key role in forming the porous spherical aggregation and the optimal concentration of oxidant is found to be 1.5 mol L⁻¹. The mechanism for the formation of the porous spherical aggregation is proposed. The electrochemical capacitance performance is tested by cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge/discharge. The porous spherical aggregation exhibits a good electrochemical performance. It could deliver 375 F g⁻¹ within potential range 0-1.4 V at a scan rate of 5 mV s⁻¹ in 1 mol L⁻¹ Li₂SO₄ and the value is cut down to less than 0.024 F g⁻¹ per cycling period in 1000 cycles.     

Supercapacitive studies on amorphous MnO2 in mild solutions

Manganese dioxide has been synthesized by a self-reacting microemulsion method. The result of X-ray diffraction shows that lack of clear peaks and broadening of peaks indicate its amorphous nature. Typical cyclic voltammograms were measured in 0.5 mol L⁻¹ Na₂SO₄ aqueous solution and the potential ranges were controlled from −0.5 to 0.5, from −0.65 to 0.65, and from −0.75 to 0.75 V versus Hg/Hg₂SO₄ at a sweep rate of 2 mV s⁻¹. Rectangular and symmetric image was observed between −0.5 and 0.5 V indicating high electrochemical reversibility in this potential and sweep rate.     

Graphene-MnO2 and graphene asymmetrical electrochemical capacitor with a high energy density in aqueous electrolyte

The graphene-manganese oxide hybrid material has been prepared by solution-phase assembly of aqueous dispersions of graphene nanosheets and manganese oxide nanosheets at room temperature. The morphology and structure of the obtained material are examined by scanning electron microscopy, transition electron microscopy, X-ray diffraction and N₂ adsorption-desorption. Electrochemical properties are characterized by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. An asymmetric electrochemical capacitor with high energy and power densities based on the graphene-manganese oxide hybrid material as positive electrode and graphene as negative electrode in a neutral aqueous Na₂SO₄ solution as electrolyte is assembled. The asymmetrical electrochemical capacitor could cycle reversibly in a voltage of 0-1.7 V and give an energy density of 10.03 Wh kg⁻¹ even at an average power density of 2.53 kW kg⁻¹. Moreover, the asymmetrical electrochemical capacitor exhibit excellent cycle stability, and the capacitance retention of the asymmetrical electrochemical capacitor is 69% after repeating the galvanostatic charge-discharge test at the constant current density of 2230 mA g⁻¹ for 10,000 cycles.     

Synthesis of single crystalline Li0.44MnO2 nanowires with large specific capacity and good high current density property for a positive electrode of Li ion battery

The fabrication of single crystalline Li_0.44MnO₂ nanowires for the positive electrode of lithium ion battery is reported. The single crystalline Li_0.44MnO₂ nanowires are obtained by lithium exchange reaction of Na_0.44MnO₂ nanowires with high aspect ratio. The Li_0.44MnO₂ nanowires indicate both the large specific capacity of around 250 mAh g⁻¹ (1.5-4.5 V vs. Li/Li⁺) and the good high current density property for the positive electrode of lithium ion battery.     

The influence of compositional change of 0.3Li2MnO3·0.7LiMn1−xNiyCo0.1O2 (0.2 ≤ x ≤ 0.5, y = x − 0.1) cathode materials prepared by co-precipitation

Cathode materials prepared by a co-precipitation are 0.3Li₂MnO₃·0.7LiMn_1−xNi_yCo_0.1O₂ (0.2 ≤ x ≤ 0.4) cathode materials with a layered-spinel structure. In the voltage range of 2.0-4.6 V, the cathodes show more than one redox reaction peak during its cyclic voltammogram. The Li/0.3Li₂MnO₃·0.7LiMn_1−xNi_yCo_0.1O₂ (x = 0.3, y = 0.2) cell shows the initial discharge capacity of about 200 mAh g⁻¹. However, when x = 0.2 and y = 0.1, the cell exhibits a rapid decrease in discharge capacity and poor cycle life.     

Enhancement of the energy storage properties of supercapacitors using graphene nanosheets dispersed with metal oxide-loaded carbon nanotubes

Graphene nanosheets (GNs) dispersed with SnO₂ nanoparticles loaded multiwalled carbon nanotubes (SnO₂-MWCNTs) were investigated as electrode materials for supercapacitors. SnO₂-MWCNTs were obtained by a chemical method followed by calcination. GNs/SnO₂-MWCNTs nanocomposites were prepared by ultrasonication of the GNs and SnO₂-MWCNTs. Electrochemical double layer capacitors were fabricated using the composite as the electrode material and aqueous KOH as the electrolyte. Electrochemical performance of the composite electrodes were compared to that of pure GNs electrodes and the results are discussed. Electrochemical measurements show that the maximum specific capacitance, power density and energy density obtained for supercapacitor using GNs/SnO₂-MWCNTs nanocomposite electrodes were respectively 224 F g⁻¹, 17.6 kW kg⁻¹ and 31 Wh kg⁻¹. The fabricated supercapacitor device exhibited excellent cycle life with ∼81% of the initial specific capacitance retained after 6000 cycles. The results suggest that the hybrid composite is a promising supercapacitor electrode material.