基于多目标粒子群算法的稀疏分解参数优化

针对振动信号稀疏分解过程中存在的复杂参数设置问题,提出利用多目标粒子群算法进行稀疏分解参数优化,以实现振动信号的有效压缩。根据多目标粒子群理论,建立稀疏分解参数优化模型,确定粒子群优化目标函数、待优化参数,分析参数设置与目标函数之间的泛函关系。设计仿真实验,研究数据压缩指标之间的约束关系,指导多目标粒子群算法参数优化,改善数据压缩效果。应用实测数据,验证多目标粒子群算法的参数优化能力,实验结果表明:多目标粒子群算法能够优化振动信号稀疏分解参数,取得良好的振动信号数据压缩效果。     

基于信息熵改进的粒子群算法在桁架结构

提出了信息熵改进的粒子群优化算法用于解决有应力约束、位移约束的桁架结构杆件截面尺寸优化设计问题.首先介绍了信息熵基本理论和基本粒子群优化算法理论,然后对粒子群优化算法作了合理的参数设置,并将信息熵引入粒子群优化算法的适应函数和停机判别准则中.最后对2个经典的优化问题进行求解并与其他算法进行了比较.数据结果表明信息熵改进后的粒子群优化算法在桁架结构优化设计中优于其他同类算法.     

基于多目标粒子群协同算法的状态参数优化

针对铅锌烧结过程综合透气性、烧结终点的优化具有强非线性、计算复杂等特点,提出了一种有效的多目标粒子群协同优化算法。首先,建立了有综合透气性、烧结终点两个目标的优化模型。接着,通过改进的约束比较方法、粒子极值选取方法,以及利用不同的粒子群来分别优化相应的变量,提出了一种改进的多目标粒子群协同优化算法。最后,利用提出的多目标优化算法进行综合透气性、烧结终点的优化。仿真结果表明,所提出的多目标优化算法能较好地解决综合透气性、烧结终点的优化问题。     

基于改进PSO算法的结构损伤检测

结构的损伤检测常转化为求解约束优化问题,针对粒子群算法容易出现早熟问题,增大算法后期的粒子位置的改变量,从而增加粒子位置的差异,因而能够增强其在求解约束优化问题时抵抗局部极小的能力。两层刚架单损伤和多损伤识别的数值结果和收敛曲线表明了改进后的粒子群算法优于传统的带惯性因子的粒子群算法。三层框架结构的4种损伤工况的试验研究进一步说明了该算法应用于结构损伤检测领域的有效性。     

基于粒子群算法多目标优化液压支架四连杆

针对煤矿液压支架四连杆受力计算较为复杂,简化计算时易出现较大误差且稳定性较差的问题,提出从四连杆机构的空间受力出发并结合支架的运动轨迹,采用粒子群优化算法对四连杆机构展开优化研究。首先建立了四连杆优化模型,在优化模型中选取对结果影响较大的参数作为优化变量,以轨迹偏差、连杆长、连杆力之和作为目标函数,根据液压支架设计规范确定约束条件。然后使用粒子群算法对目标函数进行迭代求解并在求解过程中采用惩罚函数法解决优化模型中不等式约束问题。对比优化前后连杆的杆长、受力和稳定性数据,发现优化后的四连杆实现了轻量化,且受力较小,稳定性提高。研究结果对四连杆的设计有实际参考价值。     

时效性商品最优定价模型及其粒子群优化解

对时效性商品的定价问题进行了研究.基于一种负二项分布的离散需求函数,并在利润最大化原则下,建立了时效商品最优定价模型.由于该模型涉及多个随机变量的概率分布,常规函数极值算法难以获得问题解析解,引入粒子群优化算法,对模型进行演化求解,并给出算例分析.结果表明:利用粒子群算法,可以快速有效得到不同库存量情况下应采取的最优定价.最后提出需要进一步解决的若干问题.     

多金属矿山工业采掘生产计划模型与优化算法

为了降低多金属矿山工业生产作业成本及保证生产连续性等目标,将矿山生产作业过程中采场至卸矿点间的生产成本归结为采掘生产作业计划优化问题,建立了多金属矿山工业采掘生产计划模型。该模型以采掘和运输作业成本最小为目标,综合考虑了矿石品位波动、采场的出矿量、采掘作业量和矿产资源利用等约束条件。将改进的量子粒子群算法应用于模型中,利用进化速度和聚集度因子对算法参数进行优化,同时提出了双可行域吸引子的粒子搜索策略,提高了算法的全局收敛速度,避免了早熟问题。以某大型多金属矿山为案例,结果表明该算法解算结果要比矿山实际生产指标、非线性规划以及标准粒子群算法结果优于95%以上,算法求解速度提高了65%左右,且该模型与优化算法满足矿山工业采掘生产计划的连续性和均衡性要求。     

基于融合禁忌搜索粒子群算法的配电网无功优化

从数学角度分析,配电网无功优化是一个非线性、多变量、多约束的混合规划问题。粒子群优化搜索算法被广泛应用于求解配电网无功优化问题。由于粒子群算法粒子群在进化过程易趋向同一化,失去多样性,从而使算法陷入局部最优解。本文在分析配电网无功优化的特性基础上,提出一种改进的紧融合禁忌搜索-粒子群算法用于配电网无功优化问题的求解。通过将禁忌搜索功能融合到粒子历史最优解和全局最优解寻优过程中,避免了粒子群算法寻优过程中出现的局部最优问题,从而提高粒子群算法的全局搜索能力。通过IEEE14节点系统的仿真计算结果表明,改进的算法能取得良好的效果。     

基于智能混合策略的测试集优化

利用基于粒子群和蚁群算法的智能混合优化策略,删除冗余测试向量以解决测试集的优化问题. 利用蚁群算法的并行搜索能力构造初始解集,通过粒子群优化算法将解集维数降低,确定每次迭代的个体最优解和全局最优解,并利用新粒子信息更新信息素,最终通过多次迭代找到一个或多个最优测试集. 通过多组数据实例分析可知: 该智能混合优化策略与蚁群算法等其他测试集优化算法相比,可得到多个可行性最优测试集;与蚁群算法相比可提高收敛速度,并降低蚁群算法参数选取对收敛结果的影响,从而避免次优解的出现.     

混流装配线调度问题的离散粒子群优化解

混流装配线调度问题是JIT生产中的一个重要问题。借鉴二进制遗传算法中的交叉操作过程，对传统的连续型粒子群算法进行改进，使其适用于离散问题的优化处理。然后以丰田公司的汽车组装调度函数作为目标函数，利用改进的离散粒子群算法进行求解。对比分析表明：新算法所得结果优于常用的目标追随法、遗传算法、模拟退火等方法。     

Multi-objective optimization of engineering systems using game theory and particle swarm optimization

This study proposes particle swarm optimization (PSO) based algorithms to solve multi-objective engineering optimization problems involving continuous, discrete and/or mixed design variables. The original PSO algorithm is modified to include dynamic maximum velocity function and bounce method to enhance the computational efficiency and solution accuracy. The algorithm uses a closest discrete approach (CDA) to solve optimization problems with discrete design variables. A modified game theory (MGT) approach, coupled with the modified PSO, is used to solve multi-objective optimization problems. A dynamic penalty function is used to handle constraints in the optimization problem. The methodologies proposed are illustrated by several engineering applications and the results obtained are compared with those reported in the literature.     

OPTIMIZATION OF COMPOSITE LAMINATES WITH CUTOUTS USING GENETIC ALGORITHM,VARIABLE METRIC AND COMPLEX SEARCH METHODS

Optimization of composite laminates with cutouts is a complex problem, involving non-differentiable objective function and constraints. Choice of the optimization method is generally based on the nature and complexity of the objective function, constraints and how easily and/or accurately the first derivatives can be found. Many researchers have attempted and applied different classical optimization techniques for non-convex optimization problems. This paper clearly brings out the advantages of a non-traditional optimization method-Genetic algorithm (GA) over conventional techniques, the limitations of conventional techniques and GA's ability to approach the global optimum in an n-dimensional search space, for composite laminates.     

钢筋混凝土结构的应力拓扑优化方法研究

基于预测混凝土失效行为的Drucker-Prager(D-P)屈服准则,研究了进行钢筋混凝土结构配筋设计的应力拓扑优化方法。结合扩展的双材料密度惩罚模型,优化问题构造为以单元人工密度为设计变量、混凝土材料Drucker-Prager屈服函数为约束条件的钢筋用量最小化问题。为合理定义混凝土应力并防止应力奇异解现象,采用局部应力插值模型和ε-松弛方法对混凝土应力约束条件进行处理。推导约束函数的伴随法灵敏度计算公式,运用基于梯度的连续性优化算法求解优化问题。数值算例验证了所提优化模型的正确性及数值算法的有效性,并通过与传统最小柔顺性拓扑优化结果的比较,说明了该文方法能够充分利用混凝土的抗压能力和钢筋的抗拉能力,设计结果更为实用。     

非正态变量情况下基于杂交SAPSO-SFLA的多目标稳健协同优化

为解决非正态变量空间中复杂多变的隐式非线性功能函数的可靠性及灵敏度的问题,融合鞍点估计与线抽样法的优点,结合二分法的特点与黄金分割法的求解效率,提出基于黄金分割二分法的鞍点线抽样法,即可沿重要线抽样方向利用黄金分割点的二分法快速找到各样本点对应于功能函数的零点,将结构失效概率转化为一系列线性功能函数失效概率的平均值,求出相关变量的可靠性灵敏度,从而导出失效概率对变量均值与方差的可靠性灵敏度及结构轻量化的多目标优化问题,并阐明了多目标协同优化的思想。同时,针对可靠性灵敏度作为目标函数因误差导致多目标协同优化难以收敛的问题,提出了利用误差的思想与方法;为提高算法的收敛性,对粒子群优化(Particle Swarm Optimization,PSO)算法与混合蛙跳算法(Shuffled Frog-Leaping Algorithm,SFLA)进行改进以后,再将两者进行杂交,提出杂交自适应粒子群优化-混合蛙跳算法(Self-Adaptive PSO-SFLA,SAPSO-SFLA),并用来求解上述多目标优化问题。算例表明:1) 基于黄金分割二分法的鞍点线抽样法在求解复杂非线性功能函数的可靠性及灵敏度时精度高,速度快;2) 与粒子群优化和混合蛙跳算法相比,所提杂交SAPSO-SFLA不仅具有更快的收敛速度,其鲁棒性还能使盾构行星减速器箱体体积减小8.42%。     

排爆机械臂多目标轨迹规划研究

针对排爆机械臂轨迹规划问题,提出多目标轨迹规划方法。建立三次样条曲线分段轨迹描述方程,采用外加虚拟点法保证三次样条曲线可任意指定轨迹初始速度、加速度,提出灵活性优化目标以提高机构灵活性;将优化目标及运动学约束以轨迹方程参数表示,转化为对各段运动时间的寻优;采用CNSGA-II对排爆机械臂运动进行多目标轨迹优化,处理非线性约束最优化,建立排爆机械臂多目标轨迹规划算法流程。结果表明,该方法能有效提高规划结果灵活性,各项目标均优于线性加权单目标规划,所得轨迹平滑可控。     

Hypersonic flight vehicle trajectory optimization using pattern search algorithm

In this work, trajectory optimization of an aerodynamically controlled hypersonic boost glide class of flight vehicle is presented. In order to meet the mission constraints such as controllability, skin temperature, and terminal conditions etc., the trajectory is optimized using a pattern search algorithm with the lift to drag (L/D) ratio as a control parameter. It is brought out that the approach offers a viable tool for optimizing trajectories for the considered class of vehicles. Further, the effects of the constraints on trajectory shape and performance are studied and the analysis is used to bring out an optimal vehicle configuration at the initial stage of the design process itself. The research also reveals that the pattern search algorithm offers superior performance in comparison with the genetic algorithm for this class of optimization problem.     

离散变量结构优化设计的最优综合效能法

针对结构优化问题的位移约束,引入关键约束的界约参数,提出了结构位移统一约束的缩减形式,从而简化了结构优化模型。根据离散变量结构优化问题的特点,提出了效能系数的概念,它衡量设计变量在离散邻域范围内变化对目标函数与约束函数值的影响,并研究了基于效能系数取值分类的四种主要调整方式。根据结构应力和位移约束的影响区域属性,以综合效能最大化为引导,提出了求解离散变量结构优化问题的最优综合效能法。算例结果显示该算法具有良好的优化效率,可求得问题的最优解或获得历史上的最优记录。     

SHAPE OPTIMIZATION OF A 2D BODY SUBJECTED TO SEVERAL LOADING CONDITIONS

An algorithm for shape optimization based on simultaneous solution of the equations and inequalities arising from Kuhn-Tucker necessary conditions is presented. Regular triangular FE assembly is proposed. Element vertices are associated with design variables directly or through spline parameters defining the boundary of the optimized body. This way, during the iteration procedure, FE assembly is automatically remeshed together with the motion of the optimized boundary. Multiple loading conditions are represented in the problem as equality conditions in the form of a set of equilibrium equations for each loading condition separately. From the necessary condition equations an additional, important relation between cost function, Lagrange multipliers associated with inequality constraints and their limit values is derived. The algorithm combines standard professional FEM programs with an optimizer proposed in the paper which is illustrated with shape optimization of several 2D bodies. The proposed approach is theoretically rigorous and relatively simple for practical applications, and allows considerations sensitivities, adjoint systems and constraints linearization to be avoided.     

具有多约束连续体结构仿生拓扑优化方法

通过浮动参考区间法分析具有多约束连续体结构拓扑优化问题。浮动区间法是指将结构的拓扑优化过程看作是骨骼重建过程,通过引入参考应变区间,将结构中所有各点处主应变绝对值落入参考应变区间作为重建平衡状态,当结构处于重建平衡状态时获得结构的最优材料分布。为了使得优化结果满足给定的性态约束,参考应变区间在优化迭代过程中须不断变化。讨论了几种常见性态约束对结构性能的要求。给出了结构具有多约束时优化问题的算法。数值算例表明该方法可行。     

AN OPTIMIZATION METHOD FOR THE DESIGN OF LARGE,HIGHLY CONSTRAINED COMPLEX SYSTEMS

A practical and efficient optimization method for the rational design of large, highly constrained complex systems is presented. The design of such systems is iterative and requires the repeated formulation and solution of an analysis model, followed by the formulation and solution of a redesign model. The latter constitutes an optimization problem. The versatility and efficiency of the method for solving the optimization problem is of fundamental importance for a successful implementation of any rational design procedure.

In this paper, a method is presented for solving optimization problems formulated in terms of continuous design variables. The objective function may be linear or non-linear, single or multiple. The constraints may be any mix of linear or non-linear functions, and these may be any mix of inequalities and equalities. These features permit the solution of a wide spectrum of optimization problems, ranging from the standard linear and non-linear problems to a non-linear problem with multiple objective functions (goal programming). The algorithm for implementing the method is presented in sufficient detail so that a computer program, in any computing language, can be written.