深部巷道围岩变形试验与数值模拟研究

为了研究深部软岩巷道的变形破坏特性,以淮南矿区某煤矿13-1煤回采巷道为例,在现场调查回采巷道工程概况的基础上,开展了室内深部回采巷道围岩变形特性相似模拟试验,并基于块体离散元法,建立了深部回采巷道围岩的数值模型,模拟了开挖过程中围岩的变形特性。相似模拟试验和数值模拟试验结果表明,深部巷道围岩的典型特征为:巷道底臌量两帮移近量顶板下沉量,巷道不同围岩受开挖扰动的位移影响范围不同,底板为3.5 m,顶板为2.45 m,两帮为5.5 m。     

Bolt-grouting combined support technology in deep soft rock roadway

Analyzing the mineral composition, mechanical properties and ground stress testing in surrounding rock,the study investigated the failure mechanism of deep soft rock roadway with high stress. The boltgrouting combined support system was proposed to prevent such failures. By means of FLAC3D numerical simulation and similar material simulation, the feasibility of the support design and the effectiveness of support parameters were discussed. According to the monitoring the surface and deep displacement in surrounding rock as well as bolt axial load, this paper analyzed the deformation of surrounding rock and the stress condition of the support structure. The monitor results were used to optimize the proposed support scheme. The results of field monitors demonstrate that the bolt-grouting combined support technology could improve the surround rock strength and bearing capacity of support structure, which controlled the great deformation failure and rheological property effectively in deep soft rock roadway with high stress. As a result, the long term stability and safety are guaranteed.     

Deformation control of asymmetric floor heave in a deep rock roadway: A case study

In order to control asymmetric floor heave in deep rock roadways and deformation around the surrounding rock mass after excavation, in this paper we discuss the failure mechanism and coupling control countermeasures using the finite difference method (FLAC^3D) combined with comparative analysis and typical engineering application at Xingcun coal mine. It is indicated by the analysis that the simple symmetric support systems used in the past led to destruction of the deep rock roadway from the key zone and resulted in the deformation of asymmetric floor heave in the roadway. Suitable reinforced support countermeasures are proposed to reduce the deformation of the floor heave and the potential risk during mining. The application shows that the present support technology can be used to better environmental conditions. The countermeasures of asymmetric coupling support can not only effectively reduce the discrepancy deformation at the key area of the surrounding rock mass, but also effectively control floor heave, which helps realize the integration of support and maintain the stability of the deep rock roadways at Xingcun coal mine.     

Deformation and failure characteristics of anchorage structure of surrounding rock in deep roadway

This paper investigated the stress evolution, displacement field, local deformation and its overall distribution, and failure characteristics of the anchorage structure of surrounding rock with different rockbolt spacing through the model experiments. The influences of the pre-tightening force and spacing of rockbolt on the support strength of the anchorage structure of surrounding rock were analyzed by the simulation using FLAC3D numerical software. The support scheme of the excavated roadway was then designed, and the effectiveness of this support scheme was further verified by the displacement measurement of the roadway. The results showed that the maximum displacement between the roof and floor of the west wing track roadway in Kouzidong coal mine, China is about 42 mm, and the maximum displacement between its both sides is about 72 mm, indicating that the support scheme proposed in this study can ensure the stability and safety of the excavated roadway.     

构造应力区巷道变形破坏特征及控制技术研究

水平构造应力对巷道围岩稳定有重要的影响,针对鹤壁九矿东总回风巷在锚网索喷＋u型钢支护难以保证巷道稳定的情况,通过相似材料模拟试验研究不同水平应力作用下锚注支护巷道围岩变形破坏和位移变化特征．试验表明,随着水平应力的增大,底板加强后,水平应力对顶板的作用明显,当水平载荷达到49MPa时有少量浆皮脱落,左肩部出现块状冒落,底板比较稳定,没有发生明显臌起,只出现少量横向裂隙,锚注支护结构能控制围岩变形．将试验结果在现场应用后,通过矿压观测,两帮的最大移近量为144mm,顶底板最大移近量为105mm,锚注支护提高了围岩的自承能力,能够维持巷道稳定,为类似地质条件下的巷道支护提供借鉴．     

Support technology for mine roadways in extreme weakly cemented strata and its application简

For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock displacement, plastic zone and stress distribution in rectangular, circle arch and arch wall sections, respectively. Based on the mining depth and thickness of the coal seam, roadway support technology solutions with different buried depth and thickness of coal seam are proposed. Support schemes are amended and optimized in time through monitoring data of the deformation of roadway, roof separation, I-beam bracket, bolt and anchor cable force to ensure the long-term stability and security of the roadway surrounding rock and support structure. The monitoring results show that mine roadway support schemes for different buried depth and section can be adapted to the characteristics of ground pressure and deformation of the surrounding rock in different depth well, effectively control the roadway surrounding rock deformation and the floor heave and guarantee the safety of construction and basic stability of surrounding rock and support structure.     

Principle and practice of coupling support of double yielding shell of soft rock roadway under high stress

In order to ensure the safety and stability of the soft rock roadway under high stress, based on the characteristics of the surrounding rock deformation and failure, this paper presented the support technology “coupling support of double yielding shell”, then gave the design method of inner and outer shells and analyzed the principle and requirements of the support technology by taking the −850 m east belt roadway of Qujiang coal mine as the background. The field application results show that the support technology can control the soft rock roadway deformation better under high stress. The displacement between roadway sides was 851 mm, the displacement of the roof was 430 mm, and the displacement of the floor was 510 mm.     

Numerical simulation of grooving method for floor heave control in soft rock roadway

Grooving method can restrain the deformation and destruction of surrounding rock by transferring the maximum stress to deep rock, bringing about the effective control for floor heave in soft rock roadway.Based on this important effect, and to discuss the relationship between cutting parameters and pressurerelief effect, this paper carried out a numerical simulation of grooving along bottom slab and two sides of gateway with finite difference software FLAC2D. The results show that the control effect on floor heave in soft rock tunnel can be improved by selecting appropriate cutting parameters. Appropriately increasing the crevice depth in the middle of the floor can improve the stress state of bottom slab by stress transfer.So the floor heave can be more effectively controlled. To lengthen the crevice in the comers of roadway can simultaneously transfer the maximum stresses of bottom slab and two sides to deep rock, And promote the pressure-relief effect. Extending the crevice length and crevice width on both sides within a certain range can decrease the stress concentration in the corners of roadway, and reduce the deformation of two sides. The cutting position beneficial to restrain the floor heave is close to the bottom slab.     

软岩巷道锚喷支护破坏分析与对策

软岩巷道锚喷支护破坏原因主要有:巷道底板无支护或支护的强度不够,底板流变极易发展,形成了围岩体的流变通道;大部分锚杆支护为低工作阻力值,支护作用没有得到有效发挥;混凝土喷层和围岩体变形不匹配,导致喷层体离层、剪切破坏;钢笆网抵抗破坏和变形的能力弱,降低了网喷层的强度和抗变形能力.采取的支护对策有:底板反拱加强支护,避免局部围岩体的整体移动,实现巷道周边岩体的均匀收敛变形;选用长锚杆,更好地控制巷道围岩的变形;初喷混凝土为厚度20 mm薄喷层,实现初喷层与巷道围岩体的同步变形;用直径4 mm冷拔钢丝编织金属网替代钢笆网,提高网喷层支护体的强度与抗变形能力;二次锚杆支护在复喷混凝土后进行,防止网喷层与围岩体离层现象的发生.     

Deformation mechanism and excavation process of large span intersection within deep soft rock roadway

The FLAC3D software was used to simulate and analyze numerically the displacement, stress and plastic zone distribution characteristics of a large span intersection in a deep soft rock roadway after the surrounding rock was excavated. Our simulation results show that there are two kinds of dominating factors affecting roadway stability at points of intersection, one is the angle between horizontal stress and axial direction of the roadway and the other are the angles at the points of intersection. These results are based on a study we carried out as follows: first, we analyzed the failure mechanism of a large span intersection and then we built a mechanical model of a rock pillar at one of the points of intersection. At the end of this analysis, we obtained the failure characteristics of the critical parts on the large span intersection. Given these failure characteristics, we proposed a new supporting method, i.e., a Double-Bolt Control Technology (DBCT). By way of numerical simulation, DBCT can effectively control the deformation of the surrounding rock at the points of intersection in roadways.     

Floor heave in the west wing track haulage roadway of the Tingnan Coal Mine: Mechanism and control

Floor heave of a roadway is a dynamic phenomenon that often happens in the roadways of coal mines. It seriously affects safe production in the coal mine. Floor heave has long been one of the most difficult problems to be resolved during coal mining. An analysis of floor heave in the soft rock surrounding the roadway, and the factors influencing it, allowed the deformation mechanism in the west wing double track haulage roadway of the Tingnan Coal Mine to be deduced. Three types of floor heave are observed there: intumescent floor heave, extrusion and mobility floor heave, and compound floor heave. Control measures are proposed that have been adopted during a recent repair engineering project. Control of the floor heave in the west wing track haulage roadway was demonstrated. The reliability and rationality of a combined support technology including floor anchors, an inverted arch, and anchoring of both sides was verified by mine pressure data and the field observations. Waterproofing measures were also undertaken to assist in the control of floor heave.     

Failure mechanism and control technology of water-immersed roadway in high-stress and soft rock in a deep mine

Aiming at soft rock ground support issues under conditions of high stress and long-term water immersion, the ground failure mechanism is revealed by taking the deep-water sumps of Jiulong Mine as the engineering background and employing field investigation, tests of rock structure, mechanical properties and mineral composition. The main factors leading to the surrounding rock failure include the high and complex stress state of the water sumps, high-clay content and water-weakened rock, and the unreasonable support design. In this paper, the broken and fractured rock mass near roadway opening is considered as ground small-structure, and deep stable rock mass as ground large-structure. A support technology focusing on cutting off the water, strengthening the small structure of the rock and transferring the large structure of the rock is proposed. The proposed support technology of interconnecting the large and small structures, based on high-strength bolts, high-stiffness shotcrete layer plugging water,strengthening the small structure with deep-hole grouting and shallow-hole grouting, highpretensioned cables tensioned twice to make the large and small structures bearing the pressure evenly,channel-steel and high-pretensioned cables are used to control floor heave. The numerical simulation and field test show that this support system can control the rock deformation of the water sumps and provide technical support to similar roadway support designs.     

Numerical analysis of tunnel reinforcing influences on failure process of surrounding rock under explosive stress waves

Based on mesoscopic damage mechanics, numerical code RFPA2D （dynamic edition） was developed to analyze the influence of tunnel reinforcing on failure process of surrounding rock under explosive stress waves. The results show that the propagation phenomenon of stress wave in the surrounding rock of tunnel and the failure process of surrounding rock under explosive stress waves are reproduced realistically by using numerical code RFPA2O; from the failure process of surrounding rock, the place at which surrounding rock fractures is transferred because of tunnel reinforcing, and the rockfall and collapse caused by failure of surrounding rock are restrained by tunnel reinforcing; furthermore, the absolute values of peak values of major principal stress, and the minimal principal stress and shear stress at center point of tunnel roof are reduced because of tunnel reinforcing, and the displacement at center point of runnel roof is reduced as well, consequently the stability of tunnel increases.     

Numerical simulation study on hard-thick roof inducing rock burst in coal mine

In order to reveal the dynamic process of hard-thick roof inducing rock burst, one of the most common and strongest dynamic disasters in coal mine, the numerical simulation is conducted to study the dynamic loading effect of roof vibration on roadway surrounding rocks as well as the impact on stability. The results show that, on one hand, hard-thick roof will result in high stress concentration on mining surrounding rocks; on the other hand, the breaking of hard-thick roof will lead to mining seismicity, causing dynamic loading effect on coal and rock mass. High stress concentration and dynamic loading combination reaches to the mechanical conditions for the occurrence of rock burst, which will induce rock burst. The mining induced seismic events occurring in the roof breaking act on the mining surrounding rocks in the form of stress wave. The stress wave then has a reflection on the free surface of roadway and the tensile stress will be generated around the free surface. Horizontal vibration of roadway surrounding particles will cause instant changes of horizontal stress of roadway surrounding rocks; the horizontal displacement is directly related to the horizontal stress but is not significantly correlated with the vertical stress; the increase of horizontal stress of roadway near surface surrounding rocks and the release of elastic deformation energy of deep surrounding coal and rock mass are immanent causes that lead to the impact instability of roadway surrounding rocks. The most significant measures for rock burst prevention are controlling of horizontal stress and vibration strength.     

Influence of dynamic pressure on deep underground soft rock roadway support and its application

Due to high ground stress and mining disturbance, the deformation and failure of deep soft rock roadway is serious, and invalidation of the anchor net-anchor cable supporting structure occurs. The failure characteristics of roadways revealed with the help of the ground pressure monitoring. Theoretical analysis was adopted to analyze the influence of mining disturbance on stress distribution in surrounding rock,and the change of stress was also calculated. Considering the change of stress in surrounding rock of bottom extraction roadway, the displacement, plastic zone and distribution law of principal stress difference under different support schemes were studied by means of FLAC3D. The supporting scheme of U-shaped steel was proposed for bottom extraction roadway that underwent mining disturbance. We carried out a similarity model test to verify the effect of support in dynamic pressure. Monitoring results demonstrated the change rules of deformation and stress of surrounding rock in different supporting schemes. The supporting scheme of U-shaped steel had an effective control on deformation of surrounding rock. The scheme was successfully applied in underground engineering practice, and achieved good technical and economic benefits.     

Numerical research on stability control of roofs of water-rich roadway

In order to study the strength-weakening law of roofs of water-rich roadway, this study used FLAC software, and simulated and analyzed the failure characteristics of the surrounding rock of water-rich roadway under the condition of different cross sections and support parameters, finally obtained the stress distribution of the principle stress of the roadway as well as the displacement variation of its surrounding rock. Results indicate that the roof stability of roadway with semicircular cross section is better than the roadway with inclined rectangular cross section under water-rich condition. Besides, the surrounding rock deformation of roadway under the action of water shows a pronounced increase compared to the roadway without the action of water due to the fact that water will obviously weaken the surrounding rock of roadway, especially its roof. It is very beneficial to control roof stability of water-rich roadway and guarantee the roadway stability during its service life by improving the pretension of bolt and cable as well as decreasing inter-row spacing of the bolt.     

Numerical simulation study of the failure evolution process and failure mode of surrounding rock in deep soft rock roadways

Based on the safety coefficient method,which assigns rock failure criteria to calculate the rock mass unit,the safety coefficient contour of surrounding rock is plotted to judge the distribution form of the fractured zone in the roadway.This will provide the basis numerical simulation to calculate the surrounding rock fractured zone in a roadway.Using the single factor and multi-factor orthogonal test method,the evolution law of roadway surrounding rock displacements,plastic zone and stress distribution under different conditions is studied.It reveals the roadway surrounding rock burst evolution process,and obtains five kinds of failure modes in deep soft rock roadway.Using the fuzzy mathematics clustering analysis method,the deep soft surrounding rock failure model in Zhujixi mine can be classified and patterns recognized.Compared to the identification results and the results detected by geological radar of surrounding rock loose circle,the reliability of the results of the pattern recognition is verified and lays the foundations for the support design of deep soft rock roadways.     

Similar simulation study on the deformation and failure of surrounding rock of a large section chamber group under dynamic loading

Large and super-large section chamber groups in coal mines are frequently affected by dynamic loads resulting from production activities such as roadway driving and blasting. The stability of the surrounding rock is poor, and it is difficult to control. In this paper, a similar simulation test was used to study the deformation and evolution laws of the surrounding rock of a triangle-shaped chamber group under different dynamic loads. The results showed that under dynamic loading, the vertical stress of the surrounding rock of the chamber group increased in an oscillatory form. The maximum stress concentration coefficient reached 4.09. The damage degree of the roof was greater than that of the two sides. The deformation of the roof was approximately 1.2 times that of the two sides. For the chamber closer to the power source, the stress oscillation amplitude of the surrounding rock was larger, and the failure was more serious. The force of the anchorage structure showed a phased increasing characteristic; additionally, the force of the anchorage structure on the adjacent side of the chambers was greater than that on the other side. This study reveals the deformation and failure evolution laws of the surrounding rock of large section chamber groups under dynamic loading.     

Effect of a single weak lithological structure on the height of a collapsing roof in a deep soft rock roadway

Besides the cross sections of roadways and the tendency and obliquity of roadway axes, the major controlling factors affecting the height of a collapsing roof include the weak lithological structure of surrounding rocks. This thesis analyzes the effect of two single and weak lithological structures of both sides and the roof on the height of a collapsing roof in a deep soft rock road-way. Using the two-dimensional UDEC3.1 software, a numerical simulation was carried out on the models of weak lithological structures of both sides of a roadway and of two weak lithological structures of roof of different depths. We reconstruct the overall processes from a break-away layer, bending, subsidence and the cracking of a collapsing roof. We also illustrate the distribution characteristics of displacement fields in the surrounding rock after the roof collapse in a deep soft rock roadway. The results of our numerical simulations indicate that the form of a roof collapse is side-expanding when the roadway is a weak structure at both sides. The height of the roof collapse is related to the lithological combination of the roof when the roadway is a weak structure of the roof.     

Control technology and coordination deformation mechanism of rise entry group with high ground stress

Based on engineering practices of Wuyang Coal Mine, we carried out X-ray diffract researches on No. 3 coal; and the rocks of its roof and floor by XRD meter, and simulated the interactive effect of the surrounding rock deformation by FLAC^2D5.0 numerical simulation software under the condition of different tunneling method of multimine roadway in parallel. The internal structures of the surrounding rocks of 76 belt roadway were monitored by borehole observation instruments; and then, we analyzed the reason of failure and deformation of surrounding rocks of several rise entry, and proposed the technical measures for controlling interactive effect of several rise entry surrounding rock deformation at last. For the thickness seam rise roadway, two conclusions were drawn: one is that the co-deformation among roadway groups mainly reflect on that both shear failure and deformation in coal pillar among roadways have decreased the width of pillar core region and clamping action of coal pillar to roof strata, increased the actual span of roof strata, intensified the flexural failure of roof strata and prized the bed separation of roof deep rock strata. The other conclusion is that the factors controlling the interactive deformation among roadways is obvious when appropriate re-adjustment in construction sequence of the tunneling of multimine parallel roadways because the construction sequence among roadways also has great effects on deformation of the surrounding rock in roadway.