Oxygen-Incorporated NiMoP Nanotube Arrays as Efficient Bifunctional Electrocatalysts For Urea-Assisted Energy-Saving Hydrogen Production in Alkaline Electrolyte

To couple hydrogen evolution reaction (HER) with urea oxidation reaction (UOR) is a promising approach to produce H₂ with reduced energy consumption. However, the development of a low-cost and high-performance bifunctional electrocatalyst toward HER and UOR is still a challenge. In this work, oxygen-incorporated nickel molybdenum phosphide nanotube arrays are synthesized on nickel foam (O-NiMoP/NF) via electrodeposition accompanied with in-situ template etching. Benefiting from the modulated electronic structure and the nanotube array architecture of O-NiMoP, the self-supporting O-NiMoP/NF electrodes demonstrate highly efficient bifunctional catalytic activity toward HER and UOR. Particularly, in the HER and UOR (HER||UOR) coupled system for H₂ production, a significantly reduced cell voltage of 1.55 V is obtained at the current density of 50 mA cm^–2, which is about 300 mV lower than that of the conventional water electrolysis. Density functional theory calculations reveal that the remarkable HER and UOR activities originated from the Ni sites with the modulated electronic environment induced by Mo, P and O atoms, which facilitate the water dissociation during HER and balance the adsorption/desorption of the intermediates during UOR. The development of Ni-based phosphides nanotube arrays as a bifunctional electrocatalyst in HER||OER system provides a new approach enabling energy-saving H₂ production.     

Boosting Activity on Co4N Porous Nanosheet by Coupling CeO2 for Efficient Electrochemical Overall Water Splitting at High Current Densities

Developing highly active nonprecious electrocatalysts with superior durability for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial to improve the efficiency of overall water splitting but remains challenging. Here, a novel superhydrophilic Co₄N‐CeO₂ hybrid nanosheet array is synthesized on a graphite plate (Co₄N‐CeO₂/GP) by an anion intercalation enhanced electrodeposition method, followed by high‐temperature nitridation. Doping CeO₂ into Co₄N can favor dissociation of H₂O and adsorption of hydrogen, reduce the energy barrier of intermediate reactions of OER, and improve the compositional stability, thereby dramatically boosting the HER performance while simultaneously inducing enhanced OER activity. Furthermore, the superhydrophilic self‐supported electrode with Co₄N‐CeO₂ in situ grown on the conductive substrate expedites electron conduction between substrate and catalyst, promotes the bubble release from electrode timely and impedes catalyst shedding, ensuring a high efficiency and stable working state. Consequently, the Co₄N‐CeO₂/GP electrode shows exceptionally low overpotentials of 24 and 239 mV at 10 mA cm^?2 for HER and OER, respectively. An alkaline electrolyzer by using Co₄N‐CeO₂/GP as both the cathode and anode requires a cell voltage of 1.507 V to drive 10 mA cm^?2, outperforming the Pt/C||RuO₂ electrolyzer (1.540 V@10 mA cm^?2). More significantly, the electrolyzer has extraordinary long‐term durability at a large current density of 500 mA cm^?2 for 50 h, revealing its potential in large‐scale applications.     

Bifunctional Porous NiFe/NiCo2O4/Ni Foam Electrodes with Triple Hierarchy and Double Synergies for Efficient Whole Cell Water Splitting

A 3D hierarchical porous catalyst architecture based on earth abundant metals Ni, Fe, and Co has been fabricated through a facile hydrothermal and electrodeposition method for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The electrode is comprised of three levels of porous structures including the bottom supermacroporous Ni foam (≈500 μm) substrate, the intermediate layer of vertically aligned macroporous NiCo₂O₄ nanoflakes (≈500 nm), and the topmost NiFe(oxy)hydroxide mesoporous nanosheets (≈5 nm). This hierarchical architecture is binder‐free and beneficial for exposing catalytic active sites, enhancing mass transport and accelerating dissipation of gases generated during water electrolysis. Serving as an anode catalyst, the designed hierarchical electrode displays excellent OER catalytic activity with an overpotential of 340 mV to achieve a high current density of 1200 mA cm^?2. Serving as a cathode catalyst, the catalyst exhibits excellent performance toward HER with a moderate overpotential of 105 mV to deliver a current density of 10 mA cm^?2. Serving as both anode and cathode catalysts in a two‐electrode water electrolysis system, the designed electrode only requires a potential of 1.67 V to deliver a current density of 10 mA cm^?2 and exhibits excellent durability in prolonged bulk alkaline water electrolysis.     

Promoting Active Sites in Core–Shell Nanowire Array as Mott–Schottky Electrocatalysts for Efficient and Stable Overall Water Splitting

Developing earth‐abundant, active, and robust electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a vital challenge for efficient conversion of sustainable energy sources. Herein, metal–semiconductor hybrids are reported with metallic nanoalloys on various defective oxide nanowire arrays (Cu/CuO_x, Co/CoO_x, and CuCo/CuCoO_x) as typical Mott–Schottky electrocatalysts. To build the highway of continuous electron transport between metals and semiconductors, nitrogen‐doped carbon (NC) has been implanted on metal–semiconductor nanowire array as core–shell conductive architecture. As expected, NC/CuCo/CuCoO_x nanowires arrays, as integrated Mott–Schottky electrocatalysts, present an overpotential of 112 mV at 10 mA cm^?2 and a low Tafel slope of 55 mV dec^?1 for HER, simultaneously delivering an overpotential of 190 mV at 10 mA cm^?2 for OER. Most importantly, NC/CuCo/CuCoO_x architectures, as both the anode and the cathode for overall water splitting, exhibit a current density of 10 mA cm^?2 at a cell voltage of 1.53 V with excellent stability due to high conductivity, large active surface area, abundant active sites, and the continuous electron transport from prominent synergetic effect among metal, semiconductor, and nitrogen‐doped carbon. This work represents an avenue to design and develop efficient and stable Mott–Schottky bifunctional electrocatalysts for promising energy conversion.     

Modulating Local Interfacial Bonding Environment of Heterostructures for Energy-Saving Hydrogen Production at High Current Densities

Coupling urea oxidation reaction (UOR) with hydrogen evolution reaction (HER) is an effective energy-saving technique for hydrogen generation. However, exploring efficient bifunctional electrocatalysts under high current density is still challenging. Herein, hierarchical Fe doped cobalt selenide coupled with FeCo layered double hydroxide (Fe-Co_0.85Se/FeCo LDH) array as a self-supported superior bifunctional heterojunction electrode is rationally designed for both UOR and HER. The unique heterostructure facilitates electron transfer and interface interactions through local interfacial Co-Se/O-Fe bonding environment modulation, improving reaction kinetics and intrinsic activity. As a result, the heterostructured electrocatalyst exhibits ultralow potentials of −0.274 and 1.48 V to reach 500 mA cm⁻² for catalyzing the HER and UOR, respectively. Particularly, the full urea electrolysis system driven by Fe-Co_0.85Se/FeCo LDH delivers 300 mA cm⁻² at a relatively low potential of 1.57 V, which is 150 mV lower than the conventional water electrolysis. The combination of in situ characterization and theoretical analysis reveal that the active sites with the adjustable electronic environment are induced by the interfacial bonding of the heterojunction, facilitating the water decomposition of HER and the stabilization of intermediates in UOR. This work inspires the interfacial environment modulation to optimize advanced electrocatalysts for energy-saving H₂ production.     

A Cobalt‐Based Amorphous Bifunctional Electrocatalysts for Water‐Splitting Evolved from a Single‐Source Lazulite Cobalt Phosphate

Over the years, cobalt phosphates (amorphous or crystalline) have been projected as one of the most significant and promising classes of nonprecious catalysts and studied exclusively for the electrocatalytic and photocatalytic oxygen evolution reaction (OER). However, their successful utilization of hydrogen evolution reaction (HER) and the reaction of overall water‐splitting is rather unexplored. Herein, presented is a crystalline cobalt phosphate, Co₃(OH)₂(HPO₄)₂, structurally related to the mineral lazulite, as an efficient precatalyst for OER, HER, and water electrolysis in alkaline media. During both electrochemical OER and HER, the Co₃(OH)₂(HPO₄)₂ nanostructure was completely transformed in situ into porous amorphous CoO_x (OH) films that mediate efficient OER and HER with extremely low overpotentials of only 182 and 87 mV, respectively, at a current density of 10 mA cm^?2. When assemble as anode and cathode in a two‐electrode alkaline electrolyzer, unceasing durability over 10 days is achieved with a final cell voltage of 1.54 V, which is superior to the recently reported effective bifunctional electrocatalysts. The strategy to achieve more active sites for oxygen and hydrogen generation via in situ oxidation or reduction from a well‐defined inorganic material provides an opportunity to develop cost‐effective and efficient electrocatalysts for renewable energy technologies.     

Fluorinated Ni-O-C Heterogeneous Catalyst for Efficient Urea-Assisted Hydrogen Production

Constructing multiple heterogeneous structures allows for improving the electrocatalytic activity of NiO by incorporating multiple active sites. Unfortunately, the poor conductivity of NiO makes efficient charge transfer within the heterogeneous structures difficult, thereby inhibiting the improvement of its intrinsic activity. Herein, F-doped NiO/Ni@C heterogeneous catalyst (F-NiO/Ni@C) is fabricated via a new organic-inorganic hybrid approach, showing both advanced hydrogen evolution reaction (HER) and urea oxidation reaction (UOR) activity. The targeted F-doping increases electron delocalization, and facilitates electron transfer from Ni to NiO at the nano-interfaces. This interphase synergy provides ready-to-use F-NiO active sites, allowing F-NiO/Ni@C to achieve optimum H* adsorption Gibbs free energy for HER and a lower energy barrier for UOR. As a result, the as-configured F-NiO/Ni@C || F-NiO/Ni@C cell requires an ultra-low cell voltage of 1.37 V to achieve 10 mA cm⁻² in alkaline media (with 0.3 M urea), outperforming the state-of-the-art benchmark Pt/C|| RuO₂ cell (1.45 V). This study reveals the positive impact of anion doping on interphase synergy and provides useful guidelines for designing monometallic catalysts for UOR as well as hydrogen generation.     

Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

3D Self‐Supported Fe‐Doped Ni2P Nanosheet Arrays as Bifunctional Catalysts for Overall Water Splitting

The development of highly efficient bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial for improving the efficiency of overall water splitting, but still remains challenging issue. Herein, 3D self‐supported Fe‐doped Ni₂P nanosheet arrays are synthesized on Ni foam by hydrothermal method followed by in situ phosphorization, which serve as bifunctional electrocatalysts for overall water splitting. The as‐synthesized (Ni_0.33Fe_0.67)₂P with moderate Fe doping shows an outstanding OER performance, which only requires an overpotential of ≈230 mV to reach 50 mA cm^?2 and is more efficient than the other Fe incorporated Ni₂P electrodes. In addition, the (Ni_0.33Fe_0.67)₂P exhibits excellent activity toward HER with a small overpotential of ≈214 mV to reach 50 mA cm^?2. Furthermore, an alkaline electrolyzer is measured using (Ni_0.33Fe_0.67)₂P electrodes as cathode and anode, respectively, which requires cell voltage of 1.49 V to reach 10 mA cm^?2 as well as shows excellent stability with good nanoarray construction. Such good performance is attributed to the high intrinsic activity and superaerophobic surface property.     

Regulating the Electronic Structure of CoP Nanosheets by O Incorporation for High‐Efficiency Electrochemical Overall Water Splitting

The exploration of earth‐abundant and high‐efficiency bifunctional electrocatalysts for overall water splitting is of vital importance for the future of the hydrogen economy. Regulation of electronic structure through heteroatom doping represents one of the most powerful strategies to boost the electrocatalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, a rational design of O‐incorporated CoP (denoted as O‐CoP) nanosheets, which synergistically integrate the favorable thermodynamics through modification of electronic structures with accelerated kinetics through nanostructuring, is reported. Experimental results and density functional theory simulations manifest that the appropriate O incorporation into CoP can dramatically modulate the electronic structure of CoP and alter the adsorption free energies of reaction intermediates, thus promoting the HER and OER activities. Specifically, the optimized O‐CoP nanosheets exhibit efficient bifunctional performance in alkaline electrolyte, requiring overpotentials of 98 and 310 mV to deliver a current density of 10 mA cm^?2 for HER and OER, respectively. When served as bifunctional electrocatalysts for overall water splitting, a low cell voltage of 1.60 V is needed for achieving a current density of 10 mA cm^?2. This proposed anion‐doping strategy will bring new inspiration to boost the electrocatalytic performance of transition metal–based electrocatalysts for energy conversion applications.     

Synergistic Engineering of Doping and Vacancy in Ni(OH)2 to Boost Urea Electrooxidation

Nickel hydroxide (Ni(OH)₂) has been identified as one of the best promising electrocatalyst candidates for urea oxidation reaction (UOR) due to its flexible structures, wide compositions, and abundant 3d electrons under alkaline conditions. However, its layered structure with limited exposed edge sites severely hinders further improvement of the UOR activity. Herein, oxygen-vacancy rich and vanadium doped Ni(OH)₂ (O_vac-V-Ni(OH)₂) catalysts are prepared and synergistically boost the urea electrooxidation. Vanadium doping contributes more exposed active sites, and simultaneously generates oxygen vacancies, switching the rate-determining step of UOR from *COOH deprotonation to the N–H bond cleavage process and lowering the thermodynamic barrier by around 1.13 eV. The novel O_vac-V-Ni(OH)₂ demonstrates good electrocatalytic performances with a working potential of 1.47 V at a high current density of 100 mA cm⁻². Synergistic engineering of doping and oxygen vacancy is a promising strategy for designing efficient UOR electrocatalysts.     

CuCo Hybrid Oxides as Bifunctional Electrocatalyst for Efficient Water Splitting

Solar‐driven water splitting is a promising approach for renewable energy, where the development of efficient and stable bifunctional electrocatalysts for simultaneously producing hydrogen and oxygen is still challenging. Herein, combined with the hydrogen evolution reaction (HER) activity of a copper(I) complex and oxygen evolution reaction (OER) activity of cobalt‐based oxides, a type of 1D copper‐cobalt hybrid oxide nanowires (CuCoO‐NWs) is developed via a facile two‐step growth‐conversion process toward a bifunctional water splitting catalyst. The CuCoO‐NWs exhibit excellent catalytic performances for both HER and OER in the same basic electrolyte, with optimized low onset overpotentials and high current densities. The efficient HER activity is ascribed to the formation of Cu₂O, while the activity for OER is primarily enabled by Co‐based oxides and abundant oxygen vacancies. The CuCoO‐NWs allow for the assembly of a water electrolyzer with strong alkaline media, with a current density of 10 mA cm^?2 at 1.61 V. Further combination with a commercial silicon photovoltaic allows the direct use of solar energy for spontaneous water splitting with excellent stability for over 72 h, suggesting the potential as a promising bifunctional electrocatalyst for efficient solar‐driven water splitting.     

Bifunctional Nickel Phosphide Nanocatalysts Supported on Carbon Fiber Paper for Highly Efficient and Stable Overall Water Splitting

Self‐supported electrodes comprising carbon fiber paper (CP) integrated with bifunctional nickel phosphide (Ni‐P) electrocatalysts are fabricated by electrodeposition of Ni on functionalized CP, followed by a convenient one‐step phosphorization treatment in phosphorus vapor at 500 °C. The as‐fabricated CP@Ni‐P electrode exhibits excellent electrocatalytic performance toward hydrogen evolution in both acidic and alkaline solutions, with only small overpotentials of 162 and 250 mV, respectively, attaining a cathodic current density of 100 mA cm^?2. Furthermore, the CP@Ni‐P electrode also exhibits superior catalytic performance toward oxygen evolution reaction (OER). An exceptionally high OER current of 50.4 mA cm^?2 is achieved at an overpotential of 0.3 V in 1.0 m KOH. The electrode can sustain 10 mA cm^?2 for 180 h with only negligible degradation, showing outstanding durability. Detailed microstructural and compositional studies reveal that upon OER in alkaline solution the surface Ni‐P is transformed to NiO covered with a thin Ni(OH)_x layer, forming a Ni‐P/NiO/Ni(OH)_x heterojunction, which presumably enhances the electrocatalytic performance for OER. Given the well‐defined bifunctionality, a full alkaline electrolyzer is constructed using two identical CP@Ni‐P electrodes as cathode and anode, respectively, which can realize overall water splitting with efficiency as high as 91.0% at 10 mA cm^?2 for 100 h.     

Electronic and Vacancy Engineering of Mo–RuCoOx Nanoarrays for High-Efficiency Water Splitting (Adv. Funct. Mater. 40/2023)

Exploring efficient strategies to achieve novel high-efficiency catalysts for water splitting is of great significance to develop hydrogen energy technology. Herein, unique molybdenum (Mo)-doped ruthenium–cobalt oxide (Mo–RuCoO_x) nanosheet arrays are prepared as a high-performance bifunctional electrocatalyst toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through combining electronic and vacancy engineering. Theoretical calculations and experimental results reveal that the incorporation of Ru and Mo can effectively tune the electronic structure, and the controllable Mo dissolution coupling with the oxygen vacancy generation during surface reconstruction is able to optimize the adsorption energy of hydrogen/oxygen intermediates, thus greatly accelerating the kinetics for both HER and OER. As a result, the Mo–RuCoO_x nanoarrays exhibit remarkably low overpotentials of 41 and 156 mV at 10 mA cm⁻² for HER and OER in 1 m KOH, respectively. Furthermore, the two-electrode electrolyzer assembled by the Mo–RuCoO_x nanoarrays requires a cell voltage as low as 1.457 V to achieve 10 mA cm⁻² for alkaline overall water splitting. This work holds great promise to develop novel and highly active electrocatalysts for future energy conversion applications.     

Boosting H2 Generation Coupled with Selective Oxidation of Methanol into Value‐Added Chemical over Cobalt Hydroxide@Hydroxysulfide Nanosheets Electrocatalysts

The sluggish kinetics of oxygen evolution reaction (OER) is the main bottleneck for the electrocatalytic water splitting to produce hydrogen (H₂), and the by‐product is worthless O₂. Therefore, designing a thermodynamically favorable oxidation reaction to replace OER and coupling with value‐added product generation on the anode is of significance for boosting H₂ generation under low electrolysis voltage. Herein, cobalt hydroxide@hydroxysulfide nanosheets on carbon paper (Co(OH)₂@HOS/CP) are synthesized as bifunctional electrocatalysts to facilitate H₂ production and convert methanol to valuable formate simultaneously. Benefiting from the influences/changes on the composition, surface properties, electronic structure, and chemistry of Co(OH)₂, the as‐obtained electrodes exhibit very high selectivity for methanol to value‐added formate oxidation (MFO) and boost electrocatalytic performance with low overpotential of 155 mV for MFO and 148 mV for hydrogen evolution reaction at a current density of 10 mA cm^?2. Furthermore, the integrated two‐electrode electrolyzer drives 10 mA cm^?2 at a cell voltage of 1.497 V with united 100% Faradaic efficiency for anodic and cathodic reaction and continuous 20 h of operation without obvious decay. The electrocatalytic hydrogen production with the assistance of alternative oxidation by the robust electrocatalyst can be further used to realize the upgrading of other organic molecules with less energy consumption.     

Overall Water Splitting Catalyzed Efficiently by an Ultrathin Nanosheet‐Built,Hollow Ni3S2‐Based Electrocatalyst

Making highly efficient catalysts for an overall ?water splitting reaction is vitally important to bring solar/electrical‐to‐hydrogen energy conversion processes into reality. Herein, the synthesis of ultrathin nanosheet‐based, hollow MoO_x/Ni₃S₂ composite microsphere catalysts on nickel foam, using ammonium molybdate as a precursor and the triblock copolymer pluronic P123 as a structure‐directing agent is reported. It is also shown that the resulting materials can serve as bifunctional, non‐noble metal electrocatalysts with high activity and stability for the hydrogen evolution reaction (HER) as well as the oxygen evolution reaction (OER). Thanks to their unique structural features, the materials give an impressive water‐splitting current density of 10 mA cm^?2 at ≈1.45 V with remarkable durability for >100 h when used as catalysts both at the cathode and the anode sides of an alkaline electrolyzer. This performance for an overall water splitting reaction is better than even those obtained with an electrolyzer consisting of noble metal‐based Pt/C and IrO_x/C catalytic couple—the benchmark catalysts for HER and OER, respectively.     

Engineering an Earth‐Abundant Element‐Based Bifunctional Electrocatalyst for Highly Efficient and Durable Overall Water Splitting

The simultaneous and efficient evolution of hydrogen and oxygen with earth‐abundant, highly active, and robust bifunctional electrocatalysts is a significant concern in water splitting. Herein, non‐noble metal‐based Ni–Co–S bifunctional catalysts with tunable stoichiometry and morphology are realized. The engineering of electronic structure and subsequent morphological design synergistically contributes to significantly elevated electrocatalytic performance. Stable overpotentials (η₁₀) of 243 mV (vs reversible hydrogen electrode) for oxygen evolution reaction (OER) and 80 mV for hydrogen evolution reaction (HER), as well as Tafel slopes of 54.9 mV dec^?1 for OER and 58.5 mV dec^?1 for HER, are demonstrated. In addition, density functional theory calculations are performed to determine the optimal electronic structure via the electron density differences to verify the enhanced OER activity is related to the Co top site on the (110) surface. Moreover, the tandem bifunctional NiCo₂S₄ exhibit a required voltage of 1.58 V (J = 10 mA cm^?2) for simultaneous OER and HER, and no obvious performance decay is observed after 72 h. When integrated with a GaAs solar cell, the resulting photoassisted water splitting electrolyzer shows a certified solar‐to‐hydrogen efficiency of up to 18.01%, further demonstrating the feasibility of engineering protocols and the promising potential of bifunctional NiCo₂S₄ for large‐scale overall water splitting.     

Electro‐Oxidation of Ni42 Steel: A Highly Active Bifunctional Electrocatalyst

Janus type water‐splitting catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni42 steel is upon harsh anodization converted into a bifunctional electrocatalyst. Oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) and at pH 0, 1, 13, 14, 14.6 (HER), respectively. The current density taken from long‐term OER measurements in pH 7 buffer solution upon the electro‐activated steel at 491 mV overpotential (η) is around four times higher (4 mA cm^?2) in comparison with recently developed OER electrocatalysts. The very strong voltage–current behavior of the catalyst shown in OER polarization experiments at both pH 7 and at pH 13 are even superior to those known for IrO₂‐RuO₂. No degradation of the catalyst is detected even when conditions close to standard industrial operations are applied to the catalyst. A stable Ni‐, Fe‐oxide based passivating layer sufficiently protects the bare metal for further oxidation. Quantitative charge to oxygen (OER) and charge to hydrogen (HER) conversion are confirmed. High‐resolution XPS spectra show that most likely γ?NiO(OH) and FeO(OH) are the catalytic active OER and NiO is the catalytic active HER species.     

Metal (Ni,Co)‐Metal Oxides/Graphene Nanocomposites as Multifunctional Electrocatalysts

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) along with hydrogen evolution reaction (HER) have been considered critical processes for electrochemical energy conversion and storage through metal‐air battery, fuel cell, and water electrolyzer technologies. Here, a new class of multifunctional electrocatalysts consisting of dominant metallic Ni or Co with small fraction of their oxides anchored onto nitrogen‐doped reduced graphene oxide (rGO) including Co‐CoO/N‐rGO and Ni‐NiO/N‐rGO are prepared via a pyrolysis of graphene oxide and cobalt or nickel salts. Ni‐NiO/N‐rGO shows the higher electrocatalytic activity for the OER in 0.1 m KOH with a low overpotential of 0.24 V at a current density of 10 mA cm^?2, which is superior to that of the commercial IrO₂. In addition, it exhibits remarkable activity for the HER, demonstrating a low overpotential of 0.16 V at a current density of 20 mA cm^?2 in 1.0 m KOH. Apart from similar HER activity to the Ni‐based catalyst, Co‐CoO/N‐rGO displays the higher activity for the ORR, comparable to Pt/C in zinc‐air batteries. This work provides a new avenue for the development of multifunctional electrocatalysts with optimal catalytic activity by varying transition metals (Ni or Co) for these highly demanded electrochemical energy technologies.     

A Self‐Standing High‐Performance Hydrogen Evolution Electrode with Nanostructured NiCo2O4/CuS Heterostructures

An efficient self‐standing 3D hydrogen evolution cathode has been developed by coating nickel cobaltite (NiCo₂O₄)/CuS nanowire heterostructures on a carbon fiber paper (CFP). The obtained CFP/NiCo₂O₄/CuS electrode shows exceptional hydrogen evolution reaction (HER) performance and excellent durability in acidic conditions. Remarkably, as an integrated 3D hydrogen‐evolving cathode operating in acidic electrolytes, CFP/NiCo₂O₄/CuS maintains its activity more than 50 h and exhibits an onset overpotential of 31.1 mV, an exchange current density of 0.246 mA cm^?2, and a Tafel slope of 41 mV dec^?1. Compared to other non‐Pt electrocatalysts reported to date, CFP/NiCo₂O₄/CuS exhibits the highest HER activity and can be used in HER to produce H₂ with nearly quantitative faradaic yield in acidic aqueous media with stable activity. Furthermore, by using CFP/NiCo₂O₄/CuS as a self‐standing electrode in a water electrolyzer, a current density of 18 mA cm^?2 can be achieved at a voltage of 1.5 V which can be driven by a single‐cell battery. This strategy provides an effective, durable, and non‐Pt electrode for water splitting and hydrogen generation.