Effects of substrate parameters on structure and optical properties of ZnO thin films fabricated by pulsed laser deposition

Highly oriented zinc oxide thin films have been grown on quartz, Si (1 1 1) and sapphire substrates by pulsed laser deposition (PLD). The effect of temperature and substrate parameter on structural and optical properties of ZnO thin films has been characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), optical transmission spectra and PL spectra. The experimental results show that the best crystalline thin films grown on different substrate with hexagonal wurtzite structure were achieved at growth temperature 400–500 °C. The growth temperature of ZnO thin film deposited on Si (1 1 1) substrate is lower than that of sapphire and quartz. The band gaps are increasing from 3.2 to 3.31 eV for ZnO thin film fabricated on quartz substrate at growth temperature from 100 to 600 °C. The crystalline quality and UV emission of ZnO thin film grown on sapphire substrate are significantly higher than those of other ZnO thin films grown on different substrates.     

Thickness dependence of structural, electrical and optical properties of sprayed ZnO:Cu films

ZnO:Cu thin films have been deposited by spray pyrolysis techniques within two different (450 °C and 500 °C) substrate temperatures. The structural properties of ZnO:Cu thin films have been investigated by X-ray diffraction techniques. The X-ray diffraction spectra showed that ZnO:Cu thin films are polycrystalline with the hexagonal structure and show a good c-axis orientation perpendicular to the substrate. The most preferential orientation is along the (002) direction for all spray deposited ZnO:Cu films together with orientations in the (100) and (101) planes also being abundant. Some parameters of the films were calculated and correlated with the film thickness for two different substrate temperatures. The optical properties of ZnO:Cu thin films have been investigated by UV/VIS spectrometer and the band gap values were found to be ranging from 3.29 eV to 3.46 eV.     

Substrate temperature dependence of the properties of Ga-doped ZnO films deposited by DC reactive magnetron sputtering

Ga-doped zinc oxide (ZnO:Ga) transparent conductive films were deposited on glass substrates by DC reactive magnetron sputtering. The influence of substrate temperature on the structural, electrical, and optical properties of ZnO:Ga films was investigated. The X-ray diffraction (XRD) studies show that higher temperature helps to promote Ga substitution more easily. The film deposited at 350 °C has the optimal crystal quality. The morphology of the films is strongly related to the substrate temperature. The film deposited is dense and flat with a columnar structure in the cross-section morphology. The transmittance of the ZnO:Ga thin films is over 90%. The lowest resistivity of the ZnO:Ga film is 4.48×10⁻⁴ Ω cm, for a film which was deposited at the substrate temperature of 300 °C.     

Growth and characterization of non-polar ZnO thin films by pulsed laser deposition

Non-polar ZnO thin films were fabricated on r-plane sapphire substrates by pulsed laser deposition at various temperatures from 100 to 500 °C. The effects of the substrate temperature on structural, morphological and optical properties of the films were investigated. Based on the X-ray diffraction analysis, the ZnO thin films grown at 300, 400 and 500 °C exhibited the non-polar (a-plane) orientation and those deposited below 300 °C exhibited polar (c-plane) orientation. In the optical properties of non-polar ZnO films, there were two photoluminescence peaks detected. The peaks (near-band edge emission, blue emission) are due to electron transitions from band-to-band and shallow donor level to valence band, respectively.     

Preparation of ZnO:Al thin film on transparent TPT substrate at room temperature by RF magnetron sputtering technique

Aluminum doped ZnO thin films (ZnO:Al) deposited on flexible substrates are suitable to be used as transparent conductive oxide (TCO) thin films in solar cells because of the excellent optical and electrical properties. TPT films are a kind of composite materials and are usually used as encapsulation material of solar panels. In this paper, ZnO:Al film was firstly deposited on transparent TPT substrate by RF magnetron sputtering. The structural, optical, and electrical properties of the film were investigated by X-ray diffractometry (XRD), scanning electron microscope (SEM), UV–visible spectrophotometer, as well as Hall Effect Measurement System. Results revealed that the obtained film had a hexagonal structure and a highly preferred orientation with the c-axis perpendicular to the substrate. Also, the film showed a high optical transmittance over 80% in the visible region and a resistivity of about 3.03 × 10^? 1 Ω·cm.     

High-temperature-dependent optical properties of ZnO film on sapphire substrate

In order to fabricate fiber-optic temperature sensors based on ZnO film, it is important to study the temperature-dependent optical properties of this material. In this work, we deposited ZnO films on c-plane (0001) sapphire substrate at 250 °C. Atomic force microscope and X-ray diffraction measurements show the smooth surface and high orientation along [0001] of ZnO film, respectively. The high-temperature-dependent optical properties of ZnO film were measured by ultraviolet-visible transmission with temperatures ranging from room-temperature to 300 °C and analyzed by theoretically fitting the optical absorption edge curve. It is observed that the band gap energy red shifts nonlinearly from 3.345 to 3.153 eV with increasing temperature. The sharp absorption edge of ZnO films after annealing at 300 °C is almost consistent with that of the as-deposited sample, indicating an excellent thermal stability and the potential application in fiber-optic temperature sensors.     

Application of pulsed laser deposited zinc oxide films to thin film transistor device

Transparent zinc oxide (ZnO) thin films were deposited on various substrates using a pulsed laser deposition (PLD) technique. During the PLD, oxygen pressure and substrate temperature were varied in order to find an optimal preparation condition of ZnO for thin film transistor (TFT) application. Dependence of optical, electrical and crystalline properties on the deposition conditions was investigated. The ZnO thin films were then deposited on SiN/c-Si layer structures in order to fabricate a TFT device. The pulsed laser deposited ZnO films showed a remarkable TFT performance: field effect mobility (μ_FE) of 2.4-12.85 cm²/V s and ratio of on and off current (R_on/off) in 2-6 order range. Influence of ZnO preparation conditions on the resulting TFT performance was discussed.     

The effects of substrate temperature on the structure and properties of ZnO films prepared by pulsed laser deposition

ZnO thin films were prepared by pulsed laser deposition (PLD) on glass substrates with growth temperature from room temperature (RT) to 500 °C. The effects of substrate temperature on the structural and optical properties of ZnO films have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission spectra, and RT photoluminescence (PL) measurements. The results showed that crystalline and (0 0 2)-oriented ZnO films were obtained at all substrate temperatures. As the substrate temperature increased from RT to 500 °C, the ratio of grain size in height direction to that in the lateral direction gradually decreased. The same grain size in two directions was obtained at 200 °C, and the size was smallest in all samples, which may result in maximum E_g and E₀ of the films. UV emission was observed only in the films grown at 200 °C, which is probably because the stoichiometry of ZnO films was improved at a suitable substrate temperature. It was suggested that the UV emission might be related to the stoichiometry in the ZnO film rather than the grain size of the thin film.     

Effect of precursor on epitaxially grown of ZnO thin film on p-GaN/sapphire (0 0 0 1) substrate by hydrothermal technique

Single crystalline ZnO thin film on p-GaN/sapphire (0 0 0 1) substrate, using two different precursors by hydrothermal route at a temperature of 90 °C were successfully grown. The effect of starting precursor on crystalline nature, surface morphology and optical emission of the films were studied. ZnO thin films were grown in aqueous solution of zinc acetate and zinc nitrate. X-ray diffraction analysis revealed that all the thin films were single crystalline in nature and exhibited wurtzite symmetry and c-axis orientation. The thin films obtained with zinc nitrate had a more pitted rough surface morphology compared to the film grown in zinc acetate. However the thickness of the films remained unaffected by the nature of the starting precursor. Sharp luminescence peaks were observed from the thin films almost at identical energies but deep level emission was slightly prominent for the thin film grown in zinc nitrate.     

The role of the Zn buffer layers in the structural and photoluminescence properties of ZnO films on Zn buffer layers deposited by RF magnetron sputtering

Highly c-axis oriented ZnO thin films were grown on Si (100) substrates with Zn buffer layers. Effects of the Zn buffer layer thickness on the structural and optical qualities of ZnO thin films were investigated for the ZnO films with the buffer layers 90, 110, and 130 nm thick using X-ray diffraction (XRD), photoluminescence (PL) and atomic force microscopy (AFM) analysis techniques. It was confirmed that the quality of a ZnO thin film deposited by RF magnetron sputtering was substantially improved by using a Zn buffer layer. The highest ZnO film quality was obtained with a Zn buffer layer 110 nm thick. The surface roughness of the ZnO thin film increases as the Zn buffer layer thickness increases.     

The structure and optical properties of ZnO films on various LiNbO3 substrates

ZnO films thin films have been deposited on glass and three different LiNbO₃ (LNO) substrates at room temperature using radio frequency magnetron sputtering. The structure and optical properties of the films were investigated by X-ray diffraction (XRD), optical transmission spectroscopy and spectro-photometry. XRD analysis shows that all the films are hexagonal wurtzite structure, and there is compressive strain in the films. Typical optical transmittance values in the order of 80% were obtained for all the films, and the band gaps are in the range of 3.273-3.282 eV. The Photo-Luminescence (PL) spectra results indicate that the type of substrate affects the photoluminecence of ZnO films significantly, and the films on rotated Y-cut 128° LNO substrates have strong UV emission at room temperature.     

Influence of oxygen pressure on the structural, electrical and optical properties of VO2 thin films deposited on ZnO/glass substrates by pulsed laser deposition

The influence of oxygen pressure on the structural and electrical properties of vanadium oxide thin films deposited on glass substrates by pulsed laser deposition, via a 5-nm thick ZnO buffer, was investigated. For the purposes of comparison, VO₂ thin films were also deposited on c-cut sapphire and glass substrates. During laser ablation of the V metal target, the oxygen pressure was varied between 1.33 and 6.67 Pa at 500 °C, and the interaction and reaction of the VO₂ and the ZnO buffer were studied. X-ray diffraction studies showed that the VO₂ thin film deposited on a c-axis oriented ZnO buffer layer under 1.33 Pa oxygen had (020) preferential orientation. However, VO₂ thin films deposited under 5.33 and 6.67 Pa were randomly oriented and showed (011) peaks. Crystalline orientation controlled VO₂ thin films were prepared without such expensive single crystal substrates as c-cut sapphire. The metal-insulator transition properties of the VO₂/ZnO/glass samples were investigated in terms of electrical conductivity and infrared reflectance with varying temperatures, and the surface composition was investigated by X-ray photoelectron spectroscopy.     

The effect of sputtering gas pressure on structure and photocatalytic properties of nanostructured titanium oxide self-cleaning thin film

Titanium oxide thin films were deposited by DC reactive magnetron sputtering on ZnO (80 nm thickness)/soda-lime glass and SiO₂ substrates at different gas pressures. The post annealing on the deposited films was performed at 400 °C in air atmosphere. The results of X-ray diffraction (XRD) showed that the films had anatase phase after annealing at 400 °C. The structure and morphology of deposited layers were evaluated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface grain size and roughness of TiO₂ thin films after annealing were around 10-15 nm and 2-8 nm, respectively. The optical transmittance of the films was measured using ultraviolet-visible light (UV-vis) spectrophotometer and photocatalytic activities of the samples were evaluated by the degradation of Methylene Blue (MB) dye. Using ZnO thin film as buffer layer, the photocatalytic properties of TiO₂ films were improved.     

ZnO thin films prepared by pulsed laser deposition

Zinc oxide (ZnO) thin films were deposited on soda lime glass substrates by pulsed laser deposition (PLD) in an oxygen-reactive atmosphere. The structural, optical, and electrical properties of the as-prepared thin films were studied in dependence of substrate temperature and oxygen pressure. High quality polycrystalline ZnO films with hexagonal wurtzite structure were deposited at substrate temperatures of 100 and 300 °C. The RMS roughness of the deposited oxide films was found to be in the range 2-9 nm and was only slightly dependent on substrate temperature and oxygen pressure. Electrical measurements indicated a decrease of film resistivity with the increase of substrate temperature and the decrease of oxygen pressure. The ZnO films exhibited high transmittance of 90% and their energy band gap and thickness were in the range 3.26-3.30 eV and 256-627 nm, respectively.     

Deposition of nanocrystalline ZnO by wire explosion technique and characterization of the films' properties

ZnO films deposited on glass, quartz and Al on silicon mono-crystal Si (100) substrates by using the wire explosion technique were investigated by X-ray diffraction (XRD), UV–VIS spectroscopy, scanning electron (SEM) and atomic force microscopy (AFM) measurements. X-ray diffraction measurements have shown that ZnO films are mainly composed of (100), (002) and (101) orientation crystallites. The post-deposition thermal treatment at 600 °C temperature in air has shown that the composite of Zn/ZnO film was fully oxidized to ZnO film. The XRD spectra of the film deposited in oxygen atmosphere at room temperature present high intensity dominating peak at 2h = 36, 32° corresponding to the (101) ZnO diffraction peak. The small fraction of the film (7%) corresponds to the (002) peak intensity at 2h = 34, 42°. This result indicates the good crystal quality of the film and hexagonal wurtzite-type structure deposited by zinc wire explosion. The optical absorption spectra shows the bands at 374, 373 and 371 nm corresponding to deposition conditions. The SEM analysis shows that ZnO films presented different morphologies from fractal network to porous films depending on deposition conditions. AFM analysis revealed the grain size ranges from 50 nm to 500 nm. The nanoneedles up to 300 nm in length were found as typical structures in the film. It was demonstrated that the wire explosion technique is a feasible method to produce ZnO crystalline thin films and nanostructures.     

Highly luminescent columnar ZnO films grown directly on n-Si and p-Si substrates by low-temperature electrochemical deposition

In this study, nanocolumnar zinc oxide thin films were catalyst-free electrodeposited directly on n-Si and p-Si substrates, what makes an important junction for optoelectronic devices. We demonstrate that ZnO thin films can be grown on Si at low cathodic potential by electrochemical synthesis. The scanning electron microscopy SEM showed that the ZnO thin films consist of nanocolumns with radius of about 150 nm on n-Si and 200 nm on p-Si substrates, possess uniform size distribution and fully covers surfaces. X-ray diffraction (XRD) measurements show that the films are crystalline material and are preferably grown along (0 0 2) direction. The impact of thermal annealing in the temperature range of 150-800 °C on ZnO film properties has been carried out. Low-temperature photoluminescence (PL) spectra of the as-prepared ZnO/Si samples show the extremely high intensity of the near bandgap luminescence along with the absence of visible emission. The optical quality of ZnO thin films was improved after post-deposition thermal treatment at 150 °C and 400 °C in our experiments, however, the luminescence intensity was found to decrease at higher annealing temperatures (800 °C). The obtained results indicate that electrodeposition is an efficient low-temperature technique for the growth of high-quality and crystallographically oriented ZnO thin films on n-Si and p-Si substrates for device applications.     

Low temperature annealing effects on the structure and optical properties of ZnO films grown by pulsed laser deposition

ZnO thin films were deposited on glass substrates at room temperature (RT) ∼500 °C by pulsed laser deposition (PLD) technique and then were annealed at 150-450 °C in air. The effects of annealing temperature on the microstructure and optical properties of the thin films deposited at each substrate temperature were investigated by XRD, SEM, transmittance spectra, and photoluminescence (PL). The results showed that the c-axis orientation of ZnO thin films was not destroyed by annealing treatments; the grain size increased and stress relaxed for the films deposited at 200-500 °C, and thin films densified for the films deposited at RT with increasing annealing temperature. The transmittance spectra indicated that E_g of thin films showed a decreased trend with annealing temperature. From the PL measurements, there was a general trend, that is UV emission enhanced with lower annealing temperature and disappeared at higher annealing temperature for the films deposited at 200-500 °C; no UV emission was observed for the films deposited at RT regardless of annealing treatment. Improvement of grain size and stoichiometric ratio with annealing temperature can be attributed to the enhancement of UV emission, but the adsorbed oxygen species on the surface and grain boundary of films are thought to contribute the annihilation of UV emission. It seems that annealing at lower temperature in air is an effective method to improve the UV emission for thin films deposited on glass substrate at substrate temperature above RT.     

Structural and optical properties of ZnO films grown on the AAO templates

Structural and optical properties of ZnO films grown on Al substrate and anodic alumina oxide (AAO) templates by rf magnetron reactive sputtering deposition were investigated using X-ray diffraction (XRD), atomic-force microscope (AFM) and photoluminescence (PL). We found that ZnO thin films on Al substrate show good C-axis orientation, while the orientation of ZnO film on AAO templates is disordered, this due to the fact that the crystalline of ZnO is greatly influenced by surface morphology of substrates. PL measurements show a blue band in the wavelength range of 400–500 nm caused by the interstitial Zn in the ZnO films. The intensity of emission peak of ZnO films deposited on AAO templates increases compared with that on the Al substrate. Combining electrical resistivity and carrier concentration measurements, we found that that the blue emission intensity is consistent with the concentration for the interstitial zinc in the ZnO films.     

Growth and characterization of ZnO films on (11-20) sapphire substrates by atomic layer deposition using DEZn and N2O

Zinc oxide (ZnO) films were grown on (11-20) sapphire substrates at 600 °C by atomic layer deposition (ALD) using diethylzinc (DEZn) and nitrous oxide (N₂O). A ZnO buffer layer was deposited at low temperature (LT) prior to the growth of a bulk ZnO film for a typical growth run. In some cases, buffer-layer annealing or post-annealing treatments were employed to optimize ZnO growth. Based on the experimental results of X-ray diffractometry (XRD) and transmission electron microscopy (TEM), all the as-grown ZnO films were found to show c-axis preferred orientation with co-existence of <1-100>_ZnO∥<1-100>_sapphire and <11-20>_ZnO∥<1-100>_sapphire relationships in the (0001)ZnO/(11-20)sapphire hetero-interface. Typical room temperature (RT) photoluminescence (PL) spectrum of the as-grown ZnO film shows only near band edge (NBE) emissions without defect luminescence. ZnO films with improved quality were achieved by post-annealing or buffer-layer annealing treatments. In particular, buffer-layer annealing was found to improve the crystalline and optical properties of a ZnO film substantially.     

Phosphorous and boron doping of nc-Si:H thin films deposited on plastic substrates at 150 °C by Hot-Wire Chemical Vapor Deposition

Gas-phase phosphorous and boron doping of hydrogenated nanocrystalline thin films deposited by HWCVD at a substrate temperature of 150 °C on flexible-plastic (polyethylene naphthalate, polyimide) and rigid-glass substrates is reported. The influence of the substrate, hydrogen dilution, dopant concentration and film thickness on the structural and electrical properties of the films was investigated. The dark conductivity of B- and P-doped films (σ_d = 2.8 S/cm and 4.7 S/cm, respectively) deposited on plastic was found to be somewhat higher than that found in similar films deposited on glass. n- and p-type films with thickness below ∼ 50 nm have values of crystalline fraction, activation energy and dark conductivity typical of doped hydrogenated amorphous silicon. This effect is observed both on glass and on plastic substrates.