共查询到20条相似文献,搜索用时 265 毫秒
1.
2.
基于主动识别技术的网关P2P流量检测 总被引:2,自引:0,他引:2
P2P流量在对Internet起巨大推动作用的同时,也带来了因资源过度占用而引起的网络拥塞以及安全隐患等问题,妨碍了正常网络业务的开展.文中介绍了目前主流的网关P2P流量检测技术并分析了这些技术的优缺点,提出了一种基于主动识别技术来检测和控制P2P流量的方法,以便对P2P流量进行识别和有效控制. 相似文献
3.
4.
5.
6.
随着P2P应用的广泛普及,如何对P2P流量进行正确的识别,合理的控制成为网络运维的重要问题。论文对当前P2P应用识别中所采用的几种主要技术手段(端口识别、深度包检测及深度流检测)进行了研究分析,在此基础上提出一个对P2P应用流量进行识别与控制的简单流程模型,同时对P2P流量识别技术的未来发展进行了分析。 相似文献
7.
8.
提出了一种基于神经网络与证据理论融合的P2P业务感知模型,该模型利用神经网络的非线性逼近能力和自学习能力,获取证据理论所需的基本概率值;并通过证据理论的数据融合明显提高业务感知准确率。实验结果表明,该模型与现行的P2P业务识别方法相比,能够快速、准确、可靠地识别P2P业务类别,实现合法有效的网络管理和控制,对检测网络异常行为与提高网络安全性具有重要意义。 相似文献
9.
10.
P2P流量已经占据了整个网络流量的60%~70%,极端情况下甚至达到80%~90%,成为了“带宽杀手”。HTTP、EMAIL等传统的流量受到了P2P流量的影响,大量非授权内容的传播和安全问题也随之出现。网络运营商、企业网和校园网为保证传统应用的QoS,需要对P2P流量进行有效的管理。文章分析了目前主流的P2P流量识别技术及其优缺点,针对各方法所遇到的问题设计了一个基于跨层检测框架的P2P流量识别系统的模型。 相似文献
11.
目前在深度学习领域很少以天然气泄露图像为数据进行研究,本文使用甲烷红外图像训练的卷积神经网络(VGG16)来实现泄露检测。另外,针对泄露的甲烷气体与背景图像存在相似性的问题,使用U2-Net图像分割网络代替背景建模方法来提取泄露气体区域。通过迁移VGG16网络模型结构和卷积层参数,在卷积层和激励层之间加入BN层以提高训练速度,将最后一层池化层替换为基于最大池化算法的动态自适应池化方法以提高检测精度。将改进的VGG16神经网络对分割的红外图像进行训练并与其他卷积神经网络进行对比,使用准确率,精准率,召回率和F1-score来对模型进行综合评价,其表现效果最好。与现有的检测方法进行对比,所提出的检测方法准确率更高。该检测方法能够实现高精度泄漏检测,满足天然气泄露检测准确性的要求,且模型具有较好的泛化能力和鲁棒性。 相似文献
12.
Jie He Yuexiang Yang Xiaolei Wang Zhiguo Tan 《International Journal of Network Management》2017,27(5)
Peer‐to‐peer (P2P) botnets have become one of the major threats to network security. Most existing botnet detection systems detect bots by examining network traffic. Unfortunately, the traffic volumes typical of current high‐speed Internet Service Provider and enterprise networks are challenging for these network‐based systems, which perform computationally complex analyses. In this paper, we propose an adaptive traffic sampling system that aims to effectively reduce the volume of traffic that P2P botnet detectors need to process while not degrading their detection accuracy. Our system first identifies a small number of potential P2P bots in high‐speed networks as soon as possible, and then samples as many botnet‐related packets as possible with a predefined target sampling rate. The sampled traffic then can be delivered to fine‐grained detectors for further in‐depth analysis. We evaluate our system using traffic datasets of real‐world and popular P2P botnets. The experiments demonstrate that our system can identify potential P2P bots quickly and accurately with few false positives and greatly increase the proportion of botnet‐related packets in the sampled packets while maintain the high detection accuracy of the fine‐grained detectors. 相似文献
13.
14.
为提高电力负荷预测精度,文章采用Elman神经网络建立模型,提出了一种基于Elman神经网络的电力负荷预测方法,采用自适应学习速率动量梯度下降反向传播算法进行网络训练,对乌鲁木齐电网的实际历史数据进行了仿真,仿真结果表明,Elman神经网络对电力负荷进行预测具有收敛速度快,预测精度高的优点。 相似文献
15.
针对瞳孔区域屈光度识别准确率低、检测效率低等问题,本文提出一种基于改进YOLOv3深度神经网络的瞳孔图像检测算法。首先构建用于提取瞳孔主特征的二分类检测网络YOLOv3-base,强化对瞳孔特征的学习能力。然后通过迁移学习,将训练模型参数迁移至YOLOv3-DPDC(Deep Pupil Diopter Classify),降低样本数据分布不均衡造成的模型训练困难以及检测性能差的难题,最后采用Fine-tuning调参快速训练YOLOv3多分类网络,实现了对瞳孔屈光度快速检测。通过采集的1200张红外瞳孔图像进行实验测试,结果表明本文算法屈光度检测准确率达91.6%,检测速度可达45 fps,优于使用Faster R-CNN进行屈光度检测的方法。 相似文献
16.
为了提高人脸识别正确率,提出基于改进非负矩阵分解的神经网络人脸识别算法。首先利用改进的非负矩阵分解对人脸图像进行特征提取,提高非负矩阵分解速度。接着将提取出的特征信息作为神经网络学习入口进行特征训练,由于神经网络在学习过程中,容易出现局部最小值且收敛速度慢等问题,为此采用改进的遗传算法对神经网络进行优化处理,获得最终的人脸识别结果。实验结果表明:利用改进的非负矩阵分解方法能够降低神经网络的分类训练负荷量和运算量,提高人脸识别识别率。通过和各种方法比较可知,本方法的人脸识别率都较高。本方法人脸特征分解速度快,提高了神经网络训练前期精度和收敛速度,使得人脸识别正确率高。当特征向量个数达到40以上时,人脸识别正确率保持95%以上。 相似文献
17.
针对基于传统特征提取方法的远红外图像行人检测存在准确率和实时性不足的问题,本文研究了一种基于改进YOLO模型的远红外行人检测方法,通过改进其深度卷积神经网络的输入分辨率,然后在基于实际道路采集的红外数据集上进行训练,得到检测效果最佳的检测模型,并提出基于车速的自适应图像分辨率模型,以提高车载系统的行人检测性能。在基于实际道路的红外数据集上的对比实验表明,该方法与传统方法相比,准确率从76.5%提高到89.2%,每秒传输帧数从0.01259 f/s提高到40.5 f/s,满足车载情况下的实时性需求。 相似文献
18.
目标检测是计算视觉的重要研究方向之一,尤其是基于移动设备平台实现快速精准的目标检测功能是非常有必要的。为了能够在移动设备上进行实时目标检测,本文提出一种基于Raspberry Pi 4B硬件平台,采用TensorFlow Lite开发环境,加载MobileNet-SSD网络结构算法的方案。方案采用的MobileNet卷积神经网络和SSD卷积神经网络结合的方法具有检测速度快、占用内存少等优点。同时,本文还对MobileNet-SSD网络结构算法进行了微小优化。该方案通过在公开的数据集上进行测试,对MobileNet-SSD网络结构算法和其改良算法进行了结果比较,结果表明其改良算法的检测速度有所提高,同时其检测精度几乎保持不变,在检测精准度和检测速度上都有良好表现,表明该方案具有较高的应用价值。 相似文献
19.
20.
This paper presents the results of a study in the design of a neural network based adaptive robotic control scheme. The neural network used here is a two hidden layer feedforward network and the learning scheme is the well-known backpropagation algorithm. The neural network essentially provides the inverse of the plant and acts in conjunction with a standard PD controller in the feedback loop. The objective of the controller is to accurately control the end position of a single link manipulator in the presence of large payload variations, variations in the link length and also variations in the damping constant. Based on results of this study, guidelines are presented in selecting the number of neurons in the hidden layers and also the parameters for the learning scheme used for training the network. Results also indicate that increasing the number of neurons in the hidden layer will improve the convergence speed of learning scheme up to a certain limit beyond which the addition of neurons will cause oscillations and instability. Guidelines for selecting the proper learning rate, momentum and fast backpropagation constant that ensure stability and convergence are presented. Also, a relationship between the r.m.s. error and the number of iterations used in training the neural network is established. 相似文献