Highly linear Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMTs

We report an Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMT with enhanced linearity. By engineering the channel region, i.e., inserting a 6-nm-thick AlGaN layer with 5% Al composition in the channel region, a composite-channel HEMT was demonstrated. Transconductance and cutoff frequencies of a 1 /spl times/100 /spl mu/m HEMT are kept near their peak values throughout the low- and high-current operating levels, a desirable feature for linear power amplifiers. The composite-channel HEMT exhibits a peak transconductance of 150 mS/mm, a peak current gain cutoff frequency (f/sub T/) of 12 GHz and a peak power gain cutoff frequency (f/sub max/) of 30 GHz. For devices grown on sapphire substrate, maximum power density of 3.38 W/mm, power-added efficiency of 45% are obtained at 2 GHz. The output third-order intercept point (OIP3) is 33.2 dBm from two-tone measurement at 2 GHz.     

0.5 mu m gate length InP/In/sub 0.75/Ga/sub 0.25/As/InP pseudomorphic HEMT with high DC and RF performance

High performance InP/In/sub 0.75/Ga/sub 0.25/As/InP pseudomorphic double heterojunction (DH) HEMTs with a gate length of 0.5 mu m are reported. Both DC and RF characteristics of this new type of Al-free HEMT demonstrate its suitability for microwave applications.<>     

High breakdown voltage (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P/InGaAs quasi-enhancement-mode pHEMT with field-plate technology

A high breakdown voltage and a high turn-on voltage (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P/InGaAs quasi-enhancement-mode (E-mode) pseudomorphic HEMT (pHEMTs) with field-plate (FP) process is reported for the first time. Between gate and drain terminal, the transistor has a FP metal of 1 /spl mu/m, which is connected to a source terminal. The fabricated 0.5/spl times/150 /spl mu/m/sup 2/ device can be operated with gate voltage up to 1.6 V owing to its high Schottky turn-on voltage (V/sub ON/=0.85 V), which corresponds to a high drain-to-source current (I/sub ds/) of 420 mA/mm when drain-to-source voltage (V/sub ds/) is 3.5 V. By adopting the FP technology and large barrier height (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P layer design, the device achieved a high breakdown voltage of -47 V. The measured maximum transconductance, current gain cutoff frequency and maximum oscillation frequency are 370 mS/mm, 22 GHz , and 85 GHz, respectively. Under 5.2-GHz operation, a 15.2 dBm (220 mW/mm) and a 17.8 dBm (405 mW/mm) saturated output power can be achieved when drain voltage are 3.5 and 20 V. These characteristics demonstrate that the field-plated (Al/sub 0.3/Ga/sub 0.7/)/sub 0.5/In/sub 0.5/P E-mode pHEMTs have great potential for microwave power device applications.     

A high-power W-band pseudomorphic InGaAs channel PHEMT

In this letter, we present the process and power microwave measurements of 0.07-/spl mu/m Al/sub 0.25/Ga/sub 0.75/As/In/sub 0.22/Ga/sub 0.78/As pseudomorphic high-electron mobility transistors (PHEMTs). These devices are passivated and exhibit a Ft of 125 GHz, a current density of 750 mA/mm associated to a high breakdown voltage of 4 V at open channel. Careful power measurements performed at 94 GHz have allowed to demonstrate for the first time an output power of 876 mW/mm associated with 5.7-dB power gain and a power added efficiency of 29% on a PHEMT on GaAs substrate.     

Room-temperature self-organised In/sub 0.5/Ga/sub 0.5/As quantum dot laser on silicon

The first room-temperature operation of In/sub 0.5/Ga/sub 0.5/As quantum dot lasers grown directly on Si substrates with a thin (/spl les/2 /spl mu/m) GaAs buffer layer is reported. The devices are characterised by J/sub th//spl sim/1500 A/cm/sup 2/, output power >50 mW, and large T/sub 0/ (244 K) and constant output slope efficiency (/spl ges/0.3 W/A) in the temperature range 5-95/spl deg/C.     

Al/sub 0.10/Ga/sub 0.90/As-GaAs microcoolers

GaAs-based microcoolers were fabricated and tested. An Al/sub 0.10/Ga/sub 0.90/As layer grown on GaAs, having a lower thermal conductivity and comparable electrical conductivity to that of the substrate, was employed in the microcooler structure to reduce the heat conduction back from the heat sink. Maximum cooling temperatures of 0.87 /spl deg/C and 2.3 /spl deg/C were obtained at ambient temperatures of 25 /spl deg/C and 100 /spl deg/C, respectively, from 60 /spl times/ 60 /spl mu/m microcoolers.     

DC and RF characteristics of E-mode Ga/sub 0.51/In/sub 0.49/P-In/sub 0.15/Ga/sub 0.85/As pseudomorphic HEMTs

The DC and RF characteristics of Ga/sub 0.49/In/sub 0.51/P-In/sub 0.15/Ga/sub 0.85/As enhancement- mode pseudomorphic HEMTs (pHEMTs) are reported for the first time. The transistor has a gate length of 0.8 /spl mu/m and a gate width of 200 /spl mu/m. It is found that the device can be operated with gate voltage up to 1.6 V, which corresponds to a high drain-source current (I/sub DS/) of 340 mA/mm when the drain-source voltage (V/sub DS/) is 4.0 V. The measured maximum transconductance, current gain cut-off frequency, and maximum oscillation frequency are 255.2 mS/mm, 20.6 GHz, and 40 GHz, respectively. When this device is operated at 1.9 GHz under class-AB bias condition, a 14.7-dBm (148.6 mW/mm) saturated power with a power-added efficiency of 50% is achieved when the drain voltage is 3.5 V. The measured F/sub min/ is 0.74 dB under I/sub DS/=15 mA and V/sub DS/=2 V.     

Long-wavelength In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As large-area avalanche photodiodes and arrays

Large-area (500-/spl mu/m diameter) mesa-structure In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiodes (APDs) are reported. The dark current density was /spl sim/2.5/spl times/10/sup -2/ nA//spl mu/m/sup 2/ at 90% of breakdown; low surface leakage current density (/spl sim/4.2 pA//spl mu/m) was achieved with wet chemical etching and SiO/sub 2/ passivation. An 18 /spl times/ 18 APD array with uniform distributions of breakdown voltage, dark current, and multiplication gain has also been demonstrated. The APDs in the array achieved 3-dB bandwidth of /spl sim/8 GHz at low gain and a gain-bandwidth product of /spl sim/120 GHz.     

Pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As HEMTs with an ultrahigh f/sub T/ of 562 GHz

We fabricated decananometer-gate pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As high-electron mobility transistors (HEMTs) with a very short gate-channel distance. We obtained a cutoff frequency f/sub T/ of 562 GHz for a 25-nm-gate HEMT. This f/sub T/ is the highest value ever reported for any transistor. The ultrahigh f/sub T/ of our HEMT can be explained by an enhanced electron velocity under the gate, which was a result of reducing the gate-channel distance.     

Al/sub 0.3/Ga/sub 0.7/As/In/sub x/Ga/sub 1-x/As (0/spl les/x/spl les/0.25) doped-channel field-effect transistors (DCFET's)

The properties of both lattice-matched and strained doped-channel field-effect transistors (DCFET's) have been investigated in AlGaAs/In/sub x/Ga/sub 1-x/As (0/spl les/x/spl les/0.25) heterostructures with various indium mole fractions. Through electrical characterization of grown layers in conjunction with the dc and microwave device characteristics, we observed that the introduction of a 150-/spl Aring/ thick strained In/sub 0.15/Ga/sub 0.85/As channel can enhance device performance, compared to the lattice-matched one. However, a degradation of device performance was observed for larger indium mole fractions, up to x=0.25, which is associated with strain relaxation in this highly strained channel. DCFET's also preserved a more reliable performance after biased-stress testings.<>     

High-T/sub 0/ strain-compensated InGaAsSb-AlGaAsSb quantum-well lasers emitting at 2.43 /spl mu/m

Strain-compensated InGaAsSb-AlGaAsSb quantum-well (QW) lasers emitting near 2.5 /spl mu/m have been grown by solid-source molecular beam epitaxy. The relatively high arsenic composition causing a tensile strain in the Al/sub 0.25/GaAs/sub 0.08/Sb barriers lowers the valence band edge and the hole energy level, leading to an increased hole confinement and improved laser performance. A 60% external differential efficiency in pulsed mode was achieved for 1000-/spl mu/m-long lasers emitting at 2.43 /spl mu/m. A characteristic temperature T/sub 0/ as high as 163 K and a lasing-wavelength temperature dependence of 1.02 nm//spl deg/C were obtained at room temperature. For 2000 /spl times/ 200 /spl mu/m/sup 2/ broad-area three-QW lasers without lateral current confinement, a low pulsed threshold of 275 A/cm/sup 2/ was measured.     

A 12 /spl times/ 12 In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiode array

We report a 12 /spl times/ 12 In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiode (APD) array. The mean breakdown voltage of the APD was 57.9 V and the standard deviation was less than 0.1 V. The mean dark current was /spl sim/2 and /spl sim/300 nA, and the standard deviation was /spl sim/0.19 and /spl sim/60 nA at unity gain (V/sub bias/ = 13.5 V) and at 90% of the breakdown voltage, respectively. External quantum efficiency was above 40% in the wavelength range from 1.0 to 1.6 /spl mu/m. It was /spl sim/57% and /spl sim/45% at 1.3 and 1.55 /spl mu/m, respectively. A bandwidth of 13 GHz was achieved at low gain.     

Low-threshold high-T/sub 0/ 1.3-/spl mu/m InAs quantum-dot lasers due to p-type modulation doping of the active region

P-type doping is used to demonstrate high-To, low-threshold 1-3 /spl mu/m InAs quantum-dot lasers. A 5-/spl mu/m-wide oxide confined stripe laser with a 700-/spl mu/m-long cavity exhibits a pulsed T/sub 0/ = 213 K (196 K CW) from 0/spl deg/C to 80/spl deg/C. At room temperature, the devices have a CW threshold current of /spl sim/4.4 mA with an output power over 15 mW. The threshold at 100/spl deg/C is 8.4 mA with an output power over 8 mW.     

Low-temperature MBE-grown In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As/InP optical waveguides

The MBE growth of In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As ( lambda /sub g/=1.06 mu m) layers in the temperature range of 400-450 degrees C was demonstrated to give high-quality optical waveguides which not only exhibit low propagation losses as low as 0.5 dB/cm at lambda =1.55 mu m but concomitantly high resistivity of >10/sup 4/ Omega cm. The refractive index of In/sub 0.52/Ga/sub 0.18/Al/sub 0.30/As was estimated to be 3.207+or-0.03 at lambda =1.55 mu m.<>     

High transconductance of 2.25 S/mm observed at 16 K for 195-nm-gate In/sub 0.75/Ga/sub 0.25/As/In/sub 0.52/Al/sub 0.48/As HEMT fabricated on [411]A-oriented InP substrate

We achieved a maximum transconductance (g/sub m/) of 2.25 S/mm at 16 K for a 195-nm-gate In/sub 0.75/Ga/sub 0.25/As/In/sub 0.52/Al/sub 0.48/As pseudomorphic high-electron mobility transistor (PHEMT) fabricated on a [411]A-oriented InP substrate, which is the highest value ever reported for HEMTs. This PHEMT also showed a much enhanced cutoff frequency (f/sub T/) of 310 GHz at 16 K, compared with its room temperature value (245 GHz). The significantly enhanced g/sub m/ and f/sub T/ at 16 K can be attributed to the higher saturation velocity in the region "under the gate," which is caused not only by suppressing the phonon scattering, but also by suppressing the interface roughness scattering due to the "(411)A super-flat InGaAs/InAlAs interfaces" (effectively atomically flat heterointerfaces over a wafer-size area).     

A novel InGaP/Al/sub x/Ga/sub 1-x/As/GaAs CEHBT

A new and interesting InGaP/Al/sub x/Ga/sub 1-x/As/GaAs composite-emitter heterojunction bipolar transistor (CEHBT) is fabricated and studied. Based on the insertion of a compositionally linear graded Al/sub x/Ga/sub 1-x/As layer, a near-continuous conduction band structure between the InGaP emitter and the GaAs base is developed. Simulation results reveal that a potential spike at the emitter/base heterointerface is completely eliminated. Experimental results show that the CEHBT exhibits good dc performances with dc current gain of 280 and greater than unity at collector current densities of J/sub C/=21kA/cm/sup 2/ and 2.70/spl times/10/sup -5/ A/cm/sup 2/, respectively. A small collector/emitter offset voltage /spl Delta/V/sub CE/ of 80 meV is also obtained. The studied CEHBT exhibits transistor action under an extremely low collector current density (2.7/spl times/10/sup -5/ A/cm/sup 2/) and useful current gains over nine decades of magnitude of collector current density. In microwave characteristics, the unity current gain cutoff frequency f/sub T/=43.2GHz and the maximum oscillation frequency f/sub max/=35.1GHz are achieved for a 3/spl times/20 /spl mu/m/sup 2/ device. Consequently, the studied device shows promise for low supply voltage and low-power circuit applications.     

Quantum-well infrared phototransistor with pHEMT structure

A quantum-well infrared phototransistor with a pseudomorphic high-electron mobility transistor (pHEMT) structure is presented. The proposed phototransistor uses four periods of a GaAs/Al/sub 0.3/Ga/sub 0.7/As (50 /spl Aring//120 /spl Aring/) quantum-well absorption region, as well as an In/sub 0.15/Ga/sub 0.85/As quantum well conducting channel under the absorption layer. The phototransistor shows a large responsivity of 140 A/W around 6 /spl mu/m at 23 K (for a cutoff wavelength of 7.5 /spl mu/m). The relation between the photoconductive gain and the transconductance of the pHEMT structure is also investigated.     

Effect of Mg doping on the superconducting properties of Cu/sub 1-x/Tl/sub x/Ba/sub 2/Ca/sub 3-y/Mg/sub y/Cu/sub 4/O/sub 12-/spl delta//

Superconducting properties of Cu/sub 1-x/Tl/sub x/Ba/sub 2/Ca/sub 3-y/Mg/sub y/Cu/sub 4/O/sub 12-/spl delta// (Cu/sub 1-x/Tl/sub x/Mg/sub y/-1234) material have been studied in the composition range y=0,1.5,2.25. The zero resistivity critical temperature [T/sub c/(R=0)] was found to increase with the increased concentration of Mg in the unit cell; for y=1.5 [T/sub c/(R=0)]=131 K was achieved which is hitherto highest in Cu/sub 1-x/Tl/sub x/-based superconductors. The X-ray diffraction analyses have shown the formation of a predominant single phase of Cu/sub 0.5/Tl/sub 0.5/Ba/sub 2/Ca/sub 3-y/Mg/sub y/Cu/sub 4/O/sub 12-/spl delta// superconductor with an inclusion of impurity phase. It is observed from the convex shape of the resistivity versus temperature measurements that our as-prepared material was in the region of carrier over-doping, and the number of carriers was optimized by postannealing experiments in air at 400/spl deg/C, 500/spl deg/C, and 600/spl deg/C. The T/sub c/(R=0) was found to increase with postannealing and the best postannealing temperature was found to be 600/spl deg/C. The mechanism of increased T/sub c/(R=0) is understood by carrying out infrared absorption measurements. It was observed through softening of Cu(2)-O/sub A/-Tl apical oxygen mode that improved interplane coupling was a possible source of enhancement of T/sub c/(R=0) to 131 K.     

Electrical characteristics of 8-/spl Aring/ EOT HfO/sub 2//TaN low thermal-budget n-channel FETs with solid-phase epitaxially regrown junctions

The authors demonstrate high-performing n-channel transistors with a HfO/sub 2//TaN gate stack and a low thermal-budget process using solid-phase epitaxial regrowth of the source and drain junctions. The thinnest devices have an equivalent oxide thickness (EOT) of 8 /spl Aring/, a leakage current of 1.5 A/cm/sup 2/ at V/sub G/=1 V, a peak mobility of 190 cm/sup 2//V/spl middot/s, and a drive-current of 815 /spl mu/A//spl mu/m at an off-state current of 0.1 /spl mu/A//spl mu/m for V/sub DD/=1.2 V. Identical gate stacks processed with a 1000-/spl deg/C spike anneal have a higher peak mobility at 275 cm/sup 2//V/spl middot/s, but a 5-/spl Aring/ higher EOT and a reduced drive current at 610 /spl mu/A//spl mu/m. The observed performance improvement for the low thermal-budget devices is shown to be mostly related to the lower EOT. The time-to-breakdown measurements indicate a maximum operating voltage of 1.6 V (1.2 V at 125 /spl deg/C) for a ten-year lifetime, whereas positive-bias temperature-instability measurements indicate a sufficient lifetime for operating voltages below 0.75 V.     

DC, RF, and microwave noise performances of AlGaN/GaN HEMTs on sapphire substrates

High-performance AlGaN/GaN high electron-mobility transistors with 0.18-/spl mu/m gate length have been fabricated on a sapphire substrate. The devices exhibited an extrinsic transconductance of 212 mS/mm, a unity current gain cutoff frequency (f/sub T/) of 101 GHz, and a maximum oscillation frequency (f/sub MAX/) of 140 GHz. At V/sub ds/=4 V and I/sub ds/=39.4 mA/mm, the devices exhibited a minimum noise figure (NF/sub min/) of 0.48 dB and an associated gain (Ga) of 11.16 dB at 12 GHz. Also, at a fixed drain bias of 4 V with the drain current swept, the lowest NFmin of 0.48 dB at 12 GHz was obtained at I/sub ds/=40 mA/mm, and a peak G/sub a/ of 11.71 dB at 12 GHz was obtained at I/sub ds/=60 mA/mm. With the drain current held at 40 mA/mm and drain bias swept, the NF/sub min/,, increased almost linearly with the increase of drain bias. Meanwhile, the Ga values decreased linearly with the increase of drain bias. At a fixed bias condition (V/sub ds/=4 V and I/sub ds/=40 mA/mm), the NF/sub min/ values at 12 GHz increased from 0.32 dB at -55/spl deg/C to 2.78 dB at 200/spl deg/C. To our knowledge, these data represent the highest f/sub T/ and f/sub MAX/, and the best microwave noise performance of any GaN-based FETs on sapphire substrates ever reported.