High Efficiency of Noble Metal and Metal Oxide Catalyst Systems for the Selective Reduction of NO with Propene in Lean Exhaust Gas

An investigation was conducted of noble metal and metal oxide catalysts deposited on Al₂O₃. The noble metals Pt, Pd, Rh the metal oxides CuO, SnO₂, CoO, Ag₂O, In₂O₃, catalysts were examined. Also investigated were noble metal Pt, Pd, Rh-doped In₂O₃/Al₂O₃ catalysts prepared by single sol–gel method. Both were studied for their capability to reduce NO by propene under lean conditions. In order to improve the catalytic activity and the temperature window, the intermediate addition propene between a Pt/Al₂O₃ oxidation and metal oxide combined catalyst system was also studied. Pt/Al₂O₃ and In₂O₃/Al₂O₃ combined catalyst showed high NO reduction activity in a wider temperature window, and more than 60% NO conversion was observed in the temperature range of 300–550 °C.     

Performance of a slurry bubble column reactor for Fischer-Tropsch synthesis: Determination of optimum condition

The CO conversion and selectivity to C₁+ and C₁₁+ wax products over Co/Al₂O₃ as well as Ru/Co/Al₂O₃ Fischer-Tropsch (F-T)catalysts were investigated by varying reaction temperature (210-250 °C), system pressure (1.0-3.0 MPa), GHSV (1000-6000 L/kg/h), superficial gas velocity (1.7-13.6 cm/s) and slurry concentration (9.09-26.67 wt.%) in a slurry bubble column reactor (0.05 m diameter × 1.5 m height) to determine the optimum operating conditions. Squalane or paraffin wax was used as initial liquid media. The overall CO conversion increased with increasing reaction temperature, system pressure and catalyst concentration. However, the local maximum CO conversion was exhibited at GHSV of 1500-2000 L/kg/h and superficial gas velocity of 3.4-5.0 cm/s. The CO conversion in the case of Ru/Co/Al₂O₃ was much higher and stable than that in the case of Co/Al₂O₃. The selectivity to C₁₁+ wax products increased slightly with increasing GHSV; on the other hand, it decreased with increasing reaction temperature, system pressure, and solid concentration in a slurry bubble column reactor. It could be concluded that the optimum operating conditions based on the yield of hydrocarbons and wax products were; U_G = 6.8-10 cm/s, Cs = 15 wt.%, T = 220-230 °C, P = 2.0 MPa in a slurry bubble column reactor for F-T synthesis.     

Influence of homogeneous decane oxidation on the catalytic performance of lean NO x catalysts

Extensive homogeneous gasphase reactions were observed when decane was used as the hydrocarbon reductant for the selective reduction of NO _x . The catalytic performance of a SnO₂/CoO _x /Al₂O₃ catalyst was found to be strongly dependent on the extent of the homogeneous reaction in the precatalytic volume. The effect of the homogeneous reaction on the catalytic performance also depended on whether SO₂ was present in the feed. By filling the precatalytic volume with 25–35 mesh irregularly shaped quartz chips, gasphase reaction was suppressed significantly. This methodology was used to evaluate the inherent catalytic performance of SnO₂/CoO _x /Al₂O₃ and SnO₂/Al₂O₃ catalysts with decane as a reductant. It was found that in the absence of SO₂, SnO₂/Al₂O₃ was a better catalyst than SnO₂/CoO _x /Al₂O₃, but in the presence of 30 ppm of SO₂ the latter was a far better catalyst.     

Reactivity of surface isocyanate species with NO, O2 and NO+O2 in selective reduction of NOχ over Ag/Al2O3 and Al2O3 catalysts

Reactivity of surface isocyanate (NCO(a)) species with NO, O₂ and NO+O₂ in selective reduction of NOχ over Ag/Al₂O₃ and Al₂O₃ catalysts was studied by a pulse reaction technique and an in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. The NCO(a) species on Ag/Al₂O₃ reacted with O₂ or NO+O₂ mixture gas to produce N₂ effectively above 200°C, while the reaction of NCO(a) with NO hardly produced N₂ even at 350°C. In the case of Al₂O₃ alone, less N₂ was detected in the reaction of NCO(a) with NO+O₂, indicating that silver plays an important role in the N₂ formation from NCO(a). These behaviors of the reactivity of NCO(a) species with reactant gases were in good agreement with the changes in NCO(a) bands shown by in situ DRIFT measurements. Based on these findings, the role of NCO(a) species in the selective reduction of NOχ on Ag/Al₂O₃ and Al₂O₃ catalysts is discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Activation mechanism of methane-derived coke (CHx) by CO2 during dry reforming of methane – comparison for Pt/Al2O3 and Pt/ZrO2

The reaction of methane-derived coke (CH_x: intermediate of the reforming reaction and also a source of coke deposition) with CO₂ was studied on supported Pt catalysts in relation with CO₂ reforming of methane. Temperature-programmed hydrogenation (TPH) was performed to investigate the reactivity of coke deposition after the catalyst was exposed to CH₄/He at 1070 K. Coke on Pt/Al₂O₃ could be hydrogenated around 873 K, while for Pt/ZrO₂ this was above 1073 K. The results indicate that the reactivity of coke with hydrogen was higher on Pt/Al₂O₃ than on Pt/ZrO₂, which was different from the reactivity of coke towards CO₂. Thus, the reactivity of CO₂ was studied and compared on these catalysts by several technics. The amount of CO evolution was measured during CO₂ flow at 1070 and 875 K. Rate and amount of converted CO₂ were higher on Pt/ZrO₂ than on Pt/Al₂O₃. Pt/ZrO₂ was proven to react with CO₂ to produce CO and active oxygen (CO₂CO+O) (probably on its oxygen defect site) more easily than Pt/Al₂O₃.     

Copper active sites for the selective reduction of nitrogen monoxide by propane on Cu-MFI catalysts and non-zeolitic supported-copper solids

The selective reduction of NO by C₃H₈ is performed on copper-based catalysts: Cu/Al₂O₃, Cu/SiO₂, Cu/SiO₂–Al₂O₃ solids, fresh and hydrothermally-treated Cu-MFI with various Si/Al ratios. For all the Cu-MFI solids and for the non-zeolitic supported-copper solids with low copper loadings, O₂ promotes the reduction of NO. The C₃H₈–NO reaction rate correlates with the number of accessible and isolated Cuⁿ⁺ ions deduced from the infrared spectroscopy of adsorbed CO. When only one type of sites is detected, the FTIR spectroscopy of adsorbed CO allows an estimation of the copper dispersion. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pulse studies of CH4 interaction with NiO/Al2O3 catalysts

Pulse studies of the interaction of CH₄ and NiO/Al₂O₃ catalysts at 500°C indicate that CH₄ adsorption on reduced nickel sites is a key step for CH₄ oxidative conversion. On an oxygen-rich surface, CH₄ conversion is low and the selectivity of CO₂ is higher than that of CO. With the consumption of surface oxygen, CO selectivity increases while the CO₂ selectivity falls. The conversion of CH₄ is small at 500°C when a pulse of CH₄/O₂ (CH₄O₂=21) is introduced to the partially reduced catalyst, indicating that CH₄ and O₂ adsorption are competitive steps and the adsorption of O₂ is more favorable than CH₄ adsorption     

Supported Cu Catalysts with Yttria-Doped Ceria for Steam Reforming of Methanol

The steam reforming of methanol was studied over Cu/Al₂O₃ catalysts with the addition of yttria-doped ceria (YDC). The YDC-modified catalysts were prepared by impregnating a -Al₂O₃ support with Y and Ce then with Cu. The addition of YDC drastically enhanced the activity of Cu/Al₂O₃ in the methanol reforming reaction. The enhanced activity was attributed to the increase of Cu⁺ species by YDC in the methanol reforming environment. However, the addition of YDC decreased the copper dispersion. The Cu dispersion could be enhanced by adding chromium oxide. The addition of YDC and Cr where Al₂O₃ was first impregnated with Cr then with YDC showed the most pronounced enhancement of the catalyst activity. At reaction temperatures of 200250 °C, the CO concentration in the products was smaller than 0.1%.     

Influence of preparation method on performance of Cu(Zn)(Zr)-alumina catalysts for the hydrogen production via steam reforming of methanol

The selective production of hydrogen via steam reforming of methanol (SRM) was performed using prepared catalysts at atmospheric pressure over a temperature range 200–260^∘C. Reverse water gas shift reaction and methanol decomposition reactions also take place simultaneously with the steam reforming reaction producing carbon monoxide which is highly poisonous to the platinum anode of PEM fuel cell, therefore the detailed study of effect of catalyst preparation method and of different promoters on SRM has been carried out for the minimization of carbon monoxide formation and maximization of hydrogen production. Wet impregnation and co-precipitation methods have been comparatively examined for the preparation of precursors to Cu(Zn)(Al₂O₃) and Cu(Zn)(Zr)(Al₂O₃). The catalyst preparation method affected the methanol conversion, hydrogen yield and carbon monoxide formation significantly. Incorporation of zirconia in Cu(Zn)(Al₂O₃) catalyst enhanced the catalytic activity, hydrogen selectivity and also lower the CO formation. Catalyst Cu(Zn)(Zr)(Al₂O₃) with composition Cu/Zn/Zr/Al:12/4/4/80 prepared by co-precipitation method was the most active catalyst giving methanol conversion up to 97% and CO concentration up to 400 ppm. Catalysts were characterized by atomic absorption spectroscopy (AAS), Brunauer-Emett-Teller (BET) surface area, pore volume, pore size and X-ray powder diffraction (XRPD). The XRPD patterns revealed that the addition of zirconia improves the dispersion of copper which resulted in the better catalytic performance of Cu(Zn)(Zr)(Al₂O₃). The time-on-stream (TOS) catalysts stability test was also conducted for which the Cu(Zn)(Zr)(Al₂O₃) catalyst gave the consistent performance for a long time compared to other catalysts.     

Kinetic behaviour of HC-SCR over Ag/alumina catalyst using a model paraffinic second generation biodiesel compound

The effect of longer paraffins on the mechanism of the HC-SCR reaction over a 1.91 wt.% Ag/alumina catalyst was investigated by kinetic studies. Hexadecane (C₁₆H₃₄) was chosen as a model compound as it is also a representative molecule for a second generation biodiesel consisting of only long-chain paraffins. The kinetic behaviour of the catalytic reduction of NO_x was examined at steady-state conditions in the temperature range 250–550 °C (50 °C ramping) and by using the following gas concentrations: P_NO = 100, 250, 500, 750 or 1000 ppm, P_hexadecane = 31, 94, 188, 281 or 375 ppm and P_O2=1.5, 3, 4.5, 6 or 9 vol.%. Results showed that in the temperature range 250–425 °C high hexadecane concentration had an inhibiting effect on the NO reduction. At temperatures above 350 °C the apparent reaction orders for hexadecane with respect to hexadecane increased to close or above 1. Reaction orders towards NO were close to 0.55 indicating that NO adsorption on the catalyst surface is stronger than hexadecane adsorption. Based on the experimental data it is proposed that small clusters alone cannot be the active sites for HC-SCR over Ag/Al₂O₃ but the important requirement for high activity over the catalyst is the local concentrations of hydrocarbon and NO on the interface of silver and the support.     

Development of a multi-layered micro-reactor coated with Pt–Co/Al2O3 catalyst for preferential oxidation of CO

Pt–Co/Al₂O₃ catalysts were prepared with different Co/Pt weight ratios (0.3–1.8) and their performances for preferential oxidation of CO (PROX) were tested. The activity of the catalyst increased with Co/Pt weight ratio due to the increase of the area of active phase by interaction between Pt and Co species. The 13-layered micro-channel reactor was prepared by stacking the plates coated with Pt–Co/Al₂O₃ catalyst. The reactor was divided into three parts (inlet, middle, and outlet) to evaluate the performance of each part. Most of O₂ supplied was depleted at the inlet part and the temperature gradient of the reactor occurred due to the high exothermicity of oxidations of CO and hydrogen. In order to prevent hot spot and temperature gradient, the reactor with non-uniform distribution of the catalyst (partially coating the catalyst on the channels) was prepared. The prepared reactor showed uniform temperature distribution and exhibited excellent performance for PROX.     

Deterioration Mode of Barium-Containing NOx Storage Catalyst

Barium-containing NO _x storage catalyst showed serious deactivation under thermal exposure at high temperatures. To elucidate the thermal deterioration of the NO _x storage catalyst, four types of model catalyst, Pt/Al₂O₃, Ba/Al₂O₃, Pt–Ba/Al₂O₃, and a physical mixture of Pt/Al₂O₃ + Ba/Al₂O₃ were prepared and their physicochemical properties such as BET, NO TPD, TGA/DSC, XRD, and XPS were evaluated while the thermal aging temperature was increased from 550 to 1050°C. The fresh Pt–Ba/Al₂O₃ showed a sorption capacity of 3.35 wt%/g-cat. but the aged one revealed a reduced capacity of 2.28 wt%/g-cat. corresponding to 68% of the fresh one. It was found that this reduced sorption capacity was directly related to the deterioration of the NO _x storage catalyst by thermal aging. The Ba on Ba/Al₂O₃ and Pt–Ba/Al₂O₃ catalysts began to interact with alumina to form Ba–Al solid alloy above 600°C and then transformed into stable BaAl₂O₄ having a spinel structure. However, no phase transition was observed in the Pt/Al₂O₃ catalyst having no barium component, even after aging at 1050°C.     

Role of La2O3 in Pd-Supported Catalysts for Methanol Decomposition

Systems of Pd supported on various La₂O₃-modified -Al₂O₃ and CeO₂–Al₂O₃ catalysts were tested for catalytic methanol decomposition and characterized by means of XRD, BET, TPR, H₂-chemisorption and CO–FTIR. The addition of lanthanum significantly improved the selectivity of CO and H₂ for all the catalysts but showed a different influence on the catalytic activity in two systems. Methanol conversion decreased on La₂O₃-modified Pd/-Al₂O₃ catalysts, in line with the reduction of Pd dispersion, while the addition of La₂O₃ improved the dispersion of Pd and reinforced Pd–CeO₂ interaction for La₂O₃-modified Pd/CeO₂–Al₂O₃ catalysts, which resulted in a high production rate of CO and H₂. Thus, a synergistic effect between CeO₂ and La₂O₃ was observed on -Al₂O₃-supported Pd catalyst for methanol decomposition.     

Nanodispersed Au/Al2O3 catalysts for low-temperature CO oxidation: Results of research activity at the Boreskov Institute of Catalysis

This paper presents some important results of the studies on preparation and catalytic properties of nanodispersed Au/Al₂O₃ catalysts for low-temperature CO oxidation, which are carried out at the Boreskov Institute of Catalysis (BIC) starting from 2001. The catalysts with a gold loading of 1–2 wt.% were prepared via deposition of Au complexes onto different aluminas by means of various techniques (“deposition-precipitation” (DP), incipient wetness, “chemical liquid-phase grafting” (CLPG), chemical vapor deposition (CVD)). These catalysts have been characterized comparatively by a number of physical methods (XRD, TEM, diffuse reflectance UV/vis and XPS) and catalytically tested for combustion of CO impurity (1%) in wet air stream at near-ambient temperature. Using the hydroxide or chloride gold complexes capable of chemical interaction with the surface groups of alumina as the catalyst precursors (DP and incipient wetness techniques, respectively) produces the catalysts that contain metallic Au particles mainly of 2–4 nm in diameter, uniformly distributed between the external and internal surfaces of the support granules together with the surface “ionic” Au oxide species. Application of organogold precursors gives the supported Au catalysts of egg shell type which are either close by mean Au particle size to what we obtain by DP and incipient wetness techniques (CVD of (CH₃)₂Au(acac) vapor on highly dehydrated Al₂O₃ in a rotating reactor under static conditions) or contain Au crystallites of no less than 7 nm in size (CLPG method). Regardless of deposition technique, only the Cl-free Au/Al₂O₃ catalysts containing the small Au particles (d_i ≤ 5 nm) reveal the high catalytic activity toward CO oxidation under near-ambient conditions, the catalyst stability being provided by adding the water vapor into the reaction feed. The results of testing of the nanodispersed Au/Al₂O₃ catalysts under conditions which simulate in part removal of CO from ambient air or diesel exhaust are discussed in comparison with the data obtained for the commercial Pd and Pt catalysts under the same conditions.     

Efficient production of hydrogen and multi-walled carbon nanotubes from ethanol over Fe/Al2O3 catalysts

Fe/Al₂O₃ catalysts with different Fe loadings (10-90 mol%) were prepared by hydrothermal method. Ethanol decomposition was studied over these Fe/Al₂O₃ catalysts at temperatures between 500 and 800 °C to produce hydrogen and multi-walled carbon nanotubes (MWCNTs) at the same time. The results showed that the catalytic activity and stability of Fe/Al₂O₃ depended strongly on the Fe loading and reaction temperature. The Fe(30 mol%)/Al₂O₃ and Fe(40 mol%)/Al₂O₃ were both the effective catalyst for ethanol decomposition into hydrogen and MWCNTs at 600 °C. Several reaction pathways were proposed to explain ethanol decomposition to produce hydrogen and carbon (including nanotube) at the same time.     

Synergetic effect of combined use of Cu–ZnO–Al2O3 and Pt–Al2O3 for the steam reforming of methanol

Commercial Cu–ZnO–Al₂O₃ catalysts are used widely for steam reforming of methanol. However, the reforming reactions should be modified to avoid fuel cell catalyst poisoning originated from carbon monoxide. The modification was implemented by mixing the Cu–ZnO–Al₂O₃ catalyst with Pt–Al₂O₃ catalyst. The Pt–Al₂O₃ and Cu–ZnO–Al₂O₃ catalyst mixture created a synergetic effect because the methanol decomposition and the water–gas shift reactions occurred simultaneously over nearby Pt–Al₂O₃ and Cu–ZnO–Al₂O₃ catalysts in the mixture. A methanol conversion of 96.4% was obtained and carbon monoxide was not detected from the reforming reaction when the Pt–Al₂O₃ and Cu–ZnO–Al₂O₃ catalyst mixture was used.     

Low-temperature mild partial oxidation of ethanol over supported platinum catalysts

Supported platinum catalysts containing 1.2% Pt loaded on Al₂O₃ (1.2% Pt/Al₂O₃) and 1.9% Pt loaded on ZrO₂ (1.9% Pt/ZrO₂) were prepared by incipient wetness impregnation and sol–gel method, respectively. The activity of these catalysts in the partial oxidation of ethanol (POE) was examined in a fixed-bed reactor in a temperature range between 373 and 473 K. The results indicated that significant ethanol conversion (C_EtOH > 50%) was found at the low reaction temperature with a feed ratio of O₂/EtOH ratio >0.75. Oxygen molecules introduced in reactant were completely consumed in POE reactions performed. H₂, H₂O, CO and CO₂ were the major products detected. The selectivity of hydrogen (S_H2) and CO (S_CO) varied significantly with reaction conditions. High selectivity of hydrogen (S_H2 > 95%) and low selectivity of CO (S_CO  0%) were found from a mild oxidation at T_R = 373 K over Pt/ZrO₂. However, these two selectivities were drastically deteriorated through oxidation at high T_R, high O₂/EtOH ratio or over Pt/Al₂O₃ catalyst.     

Effect of CO2 in the feed stream on the deactivation of Co/γ-Al2O3 Fischer–Tropsch catalyst

The influence of CO₂ on the deactivation of Co/γ-Al₂O₃ Fischer–Tropsch (FT) catalyst in CO hydrogenation has been investigated. The presence of CO₂ in the feed stream reveals a negative effect on catalyst stability and in the formation of heavy hydrocarbons. The CO₂ acts as a mild oxidizing agent on cobalt metal during Fischer–Tropsch synthesis. During FT synthesis on Co/γ-Al₂O₃ of 70 h, the CO conversion and C₅₊ selectivity in the presence of CO₂ decreased more significantly than in the absence of CO₂. CO₂ is found to be responsible for the partial oxidation of surface cobalt metal at FT synthesis environment with the co-existence of generated water.     

Improvement of coke resistance of Ni/Al2O3 catalyst in CH4/CO2 reforming by ZrO2 addition

This work investigates the improvement of Ni/Al₂O₃ catalyst stability by ZrO₂ addition for H₂ gas production from CH₄/CO₂ reforming reactions. The initial effect of Ni addition was followed by the effect of increasing operating temperature to 500–700 °C as well as the effect of ZrO₂ loading and the promoted catalyst preparation methods by using a feed gas mixture at a CH₄:CO₂ ratio of 1:1.25. The experimental results showed that a high reaction temperature of 700 °C was favored by an endothermic dry reforming reaction. In this reaction the deactivation of Ni/Al₂O₃ was mainly due to coke deposition. This deactivation was evidently inhibited by ZrO₂, as it enhances dissociation of CO₂ forming oxygen intermediates near the contact between ZrO₂ and nickel where the deposited coke is gasified afterwards. The texture of the catalyst or BET surface area was affected by the catalyst preparation method. The change of the catalyst texture resulted from the formation of ZrO₂–Al₂O₃ composite and the plugging of Al₂O₃ pore by ZrO₂. The 15% Ni/10% ZrO₂/Al₂O₃ co-impregnated catalyst showed a higher BET surface area and catalytic activity than the sequentially impregnated catalyst whereas coke inhibition capability of the promoted catalysts prepared by either method was comparable. Further study on long-term catalyst stability should be made.     

Electrical properties of V2O5–WO3/TiO2 EUROCAT catalysts evidence for redox process in selective catalytic reduction (SCR) deNOx reaction

Electrical conductivity measurements on EUROCAT V₂O₅–WO₃/TiO₂ catalyst and on its precursor without vanadia were performed at 300°C under pure oxygen to characterize the samples, under NO and under NH₃ to determine the mode of reactivity of these reactants and under two reaction mixtures ((i) 2000 ppm NO + 2000 ppm NH₃ without O₂, and (ii) 2000 ppm NO + 2000 ppm NH₃ + 500 ppm O₂) to put in evidence redox processes in SCR deNO_x reaction.It was first demonstrated that titania support contains certain amounts of dissolved W⁶⁺ and V⁵⁺ ions, whose dissolution in the lattice of titania creates an n-type doping effect. Electrical conductivity revealed that the so-called reference pure titania monolith was highly doped by heterovalent cations whose valency was higher than +4. Subsequent chemical analyses revealed that so-called pure titania reference catalyst was actually the WO₃/TiO₂ precursor of V₂O₅–WO₃/TiO₂ EUROCAT catalyst. It contained an average amount of 0.37 at.% W⁶⁺dissolved in titania, i.e. 1.07 × 10²⁰ W⁶⁺ cations dissolved/cm³ of titania. For the fresh catalyst, the mean amounts of W⁶⁺ and V⁵⁺ ions dissolved in titania were found to be equal to 1.07 × 10²⁰ and 4.47 × 10²⁰ cm⁻³, respectively. For the used catalyst, the mean amounts of W⁶⁺ and V⁵⁺ ions dissolved were found to be equal to 1.07 × 10²⁰ and 7.42 × 10²⁰ cm⁻³, respectively. Since fresh and used catalysts have similar compositions and similar catalytic behaviours, the only manifestation of ageing was a supplementary progressive dissolution of 2.9 × 10²⁰ additional V⁵⁺ cations in titania.After a prompt removal of oxygen, it appeared that NO alone has an electron acceptor character, linked to its possible ionosorption as NO⁻ and to the filling of anionic vacancies, mostly present on vanadia. Ammonia had a strong reducing behaviour with the formation of singly ionized vacancies. A subsequent introduction of NO indicated a donor character of this molecule, in opposition to its first adsorption. This was ascribed to its reaction with previously adsorbed ammonia strongly bound to acidic sites. Under NO + NH₃ reaction mixture in the absence of oxygen, the increase of electrical conductivity was ascribed to the formation of anionic vacancies, mainly on vanadia, created by dehydroxylation and dehydration of the surface. These anionic vacancies were initially subsequently filled by the oxygen atom of NO. N^o atoms, resulting from the dissociation of NO and from ammonia dehydrogenation, recombined into dinitrogen molecules. The reaction corresponded to

Full-size image

. In the presence of oxygen, NO did not exhibit anymore its electron acceptor character, since the filling of anionic vacancies was performed by oxygen from the gas phase. NO reacted directly with ammonia strongly bound on acidic sites. A tentative redox mechanism was proposed for both cases.