Phase equilibria and structural properties of thiophene/[Bmim][BF4]: A molecular insight from monte carlo simulations

The phase equilibria of thiophene in 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim][BF₄]) is calculated by Monte Carlo simulation in Gibbs ensemble using a united atom force field. The liquid density of studied ionic liquid and the vapor pressure of thiophene in [Bmim][BF₄] were compared with corresponding experimental data reported in the literature, and a good agreement was obtained. In order to describe the solubility of thiophene in this ionic liquid, we have calculated the radial distribution functions and spatial distribution functions of thiophene/IL mixtures to study the interaction of thiophene with cations and anions of [Bmim][BF₄] in the liquid phase. The local composition concept in fluid was also examined to give further insight into the liquid structure. The results show that thiophene is well organized around the terminal carbon atom of the butyl or methyl chain attached to the imidazolium ring of cations and tends to adopt a symmetrically distribution on the anions. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3916–3924, 2014     

Influence of ionic liquids under controlled water activity and low halide content on lipase activity

Room-temperature ionic liquids (ILs) can be used as reaction media for nonaqueous biocatalysis. However, the purity of ILs should be considered to understand the influence of ILs on enzyme activity. The major impurities in ILs are water and halide. In the transesterification of benzyl alcohol with vinyl acetate, the optimal water activities for lipases in [Omim][Tf₂N] were similar to those in organic solvents. The chloride impurity in [Omim][Tf₂N] seriously influenced the activity of lipase. In this work, the effect of ILs on lipase activity was investigated under controlled initial water activity and low halide content. The activity of lipase was highly dependent upon the anion structure of ILs. The initial reaction rate of lipases followed the order [Tf₂N]⁻>[PF6]⁻>[TfO]⁻>[SbF₆]⁻≈[BF₄]⁻. All tested lipases showed the highest activities in ILs containing [Tf₂N] anion. Particularly, [AAIM][Tf₂N] was shown as a suitable reaction medium for biocatalysis. Lipozyme IM showed the highest activity in this IL among tested ILs. Thermal stability of lipase was also investigated. The higher thermal stability of Novozym 435 was obtained in hydrophobic and water-immiscible ILs such as [Bmim][Tf₂N], [Edmim][Tf₂N], and [Bmim][PF₆].     

Improving Physical Adsorption of CO2 by Ionic Liquids‐Loaded Mesoporous Silica

CO₂ sorption capacities of the neat and silica‐supported 1‐butyl‐3‐methylimidazolium‐based ionic liquids (ILs) were measured under atmospheric pressure. The silica‐supported ILs were synthesized by the impregnation‐vaporization method and charactrized by N₂ adsorption/desorption and thermogravimeteric analysis (TGA). Evaluation of the effects of influential factors on sorption capacity demonstrated that by increase of the temperature, flow rate, and the weight percentage of ILs in sorbents, the sorption capacity decreases. Among the sorbents, [Bmim][TfO] and SiO₂‐[Bmim][BF₄](50) had the highest capacity. By increasing the IL portion in SiO₂‐[Bmim][BF₄], the selectivity for CO₂ to CH₄ could be improved. The CO₂‐rich sorbents could be easily recycled.     

Quantum chemical studies on the simultaneous interaction of thiophene and pyridine with ionic liquid

The simultaneous interaction of thiophene and pyridine with different ionic liquids:1‐butyl‐1‐methylpyrrolidinium tetrafluoroborate([BPYRO][BF₄]),1‐butyl‐1‐methylpyrrolidinium hexafluoro‐phosphate ([BPYRO][PF₆]), 1‐butyl‐4‐methylpyridinium tetrafluoroborate ([BPY][BF₄]), 1‐butyl‐4‐methylpyridinium hexafluorophosphate ([BPY][PF₆]) and 1‐benzyl‐3‐methylimidazolium tetrafluoroborate ([BeMIM][BF₄]) were investigated using quantum chemical calculations. A three‐tier approach comprising of partial charges, interaction energies and sigma profile generation using conductor‐like screening model for real solvents (COSMO‐RS) was chosen to study the systems. A quantitative attempt based on the CH‐π interaction in ionic liquid; thiophene–pyridine complexes gave the interaction energies of ILs in the order: [BPY][BF₄] > [BPYRO][PF₆] > [BeMIM][BF₄] > [BPY][PF₆] > [BPYRO][BF₄]. An inverse relation was observed between the activity coefficient at infinite dilution predicted via COSMO‐RS–based model and interaction energies. The dominance of CH‐π interaction was evident from the sigma profiles of ionic liquid together with thiophene and pyridine. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

ARGET ATRP of acrylonitrile with ionic liquid as reaction medium and FeBr3/isophthalic acid as catalyst system

Atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile with FeBr₃ and isophthalic acid (IA) as catalyst and ligand, ascorbic acid (VC) as reducing agent, and ethyl 2‐bromoisobutyrate as initiator was approached for the first time in the presence of air in 1‐dodecyl‐3‐methylimidazolium tetrafluoroborate ([C₁₂mim][BF₄]), 1‐octyl‐3‐methylimidazolium tetrafluoroborate ([C₈mim][BF₄]), and 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim][BF₄]). The rate of polymerization in [C₁₂mim][BF₄] was considerably faster than in [C₈mim][BF₄] and [C₄mim][BF₄]. With an increase of VC concentration, both the monomer conversion and the molecular weight distribution showed a trend of increase. Polyacrylonitrile (PAN) with higher molecular weight at 166,250 and broader distribution at 1.34 was successfully prepared with PAN as macroinitiator via ARGET ATRP in [C₁₂mim][BF₄] in the presence of air. The resultant polyacrylonitrile fibers were obtained with the fineness at 1.15 dtex and the tenacity at 6.24 cN dtex^?1. Additionally, it was shown that [C₁₂mim][BF₄] could be recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Optimization of Enzymatic Synthesis of Tricaprylin in Ionic Liquids by Response Surface Methodology

Ten 1,3‐dialkylimidazolium‐based ionic liquids (ILs) have been investigated as media for the enzymatic synthesis of tricaprylin, in comparison with the conventional organic solvent hexane. The results suggested that the esterification activity of Novozym 435 was higher than Lypozyme RM IM in all the ILs assayed. Novozym 435 showed higher catalytic activity in ILs with anions Tf₂N^? and PF₆^? than in BF₄^? and hexane. FTIR analysis of the secondary structure of the lipase indicated that a smaller decrease of the α‐helix was observed in [C₄MIM] Tf₂N and [C₄MIM] PF₆ than [C₄MIM] BF₄ and hexane, indicating that the anions of ILs might be a key factor for the activity of lipase in ILs. Process parameters (amount of lipase, caprylic acid/glycerol molar ratio, temperature and their interactive effects) were optimized in 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄MIM]PF₆) using Novozym 435 by response surface methodology. When the reactions were performed with the lipase amount of 6.1 % substrate mass at a caprylic acid/glycerol molar ratio of 4.5:1 and 66.7 °C, a higher yield was reached up to 92.4 %.     

Liquid‐liquid phase split in ionic liquid + toluene mixtures induced by CO2

High pressure carbon dioxide was dissolved in ionic liquid + toluene mixtures to obtain the conditions of pressure and composition where a liquid‐liquid phase split occurs at constant temperature. Ionic liquids (ILs) with four different cations paired with the bis(trifluoromethylsulfonyl)imide ([Tf₂N]^?) anion were selected: 1‐hexyl‐3‐methylimidazolium ([hmim]⁺), 1‐hexyl‐3‐methylpyridinium ([hmpy]⁺), triethyloctylphosphonium ([P₂₂₂₈]⁺), and tetradecyltrihexylphosphonium ([P₆₆₆₁₄]⁺). The solubility of CO₂ was measured in the liquid mixtures at temperatures between 298 and 333 K and at pressures up to 8 MPa, or until the second liquid phase appeared, for initial liquid phase compositions of 0.30, 0.50, and 0.70 mole fraction of IL. Ternary isotherms were compared with the binary solubility of CO₂ in each IL and pure toluene. The lowest pressure for separating toluene in a second liquid phase was achieved by decreasing the temperature of the system, increasing the amount of toluene in the initial liquid mixture and using [hmim][Tf₂N]. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2968–2976, 2015     

Nano Cyclotetramethylene Tetranitramine Particles Prepared by a Green Recrystallization Process

The solubility of cyclotetramethylene tetranitramine (HMX) in four ionic liquids (ILs): 1,3‐dimethylimidazolium dimethylphosphate ([Memim]DMP), 1‐butyl‐3‐methylimidazolium chloride ([Bmim]Cl), 1‐hexyl‐3‐methylimidazolium bromide ([Hmim]Br), and 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([Emim]BF₄) was investigated. Nano‐HMX were produced particles by spraying [Hmim]Br solution into purified ice water. Finally, the particle size, morphology, crystal phase, impact sensitivity, and thermal decomposition properties of nano‐HMX particles were tested and analyzed. All four ILs could dissolve HMX to a greater or lesser extent in the temperature range from 20 °C to 80 °C. The solubility of HMX in [Hmim]Br at 80 °C is up to 0.7 g mL⁻¹. Recrystallized HMX particles are of polyhedral or spherical shape and 40 to 130 nm in size. X‐ray diffraction indicated that nano‐HMX has a similar crystal structure as raw HMX (β‐form). Compared with raw HMX, the nano‐HMX particles have much lower impact sensitivity. However, they are easier to explode than raw HMX under thermal stimulus due to the lower peak temperature and activation energy.     

Ionic Liquid, 1‐n‐Butyl‐3‐methylimidazolium Bis(trifluoromethanesulfonyl)imide,Resulted in the First Catalyst‐Free Aminohalogenation of Electron‐Deficient Alkenes

The 2‐Ns‐based aminohalogenation of α,β‐unsaturated ketones has been achieved in an ionic liquid, 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide {[bmim][N(SO₂CF₃)₂]}. [Bmim][N(SO₂CF₃)₂] was found to be superior not only to classical organic solvents but also to its counterpart, [bmim][BF₄], which was proven to be successful in the TsNCl₂‐based aminohalogenation but failed to give any product for this reaction. The present process takes the advantage of 2‐NsNCl₂ as the stable nitrogen/halogen source in a one‐pot operation without the use of any metal catalysts, it is convenient to perform without special protection of inert gases. Eight examples were examined with good to excellent stereoselectivity (1:5 to one isomer) and modest to good chemical yields (53–72 %).     

Global phase behavior of imidazolium ionic liquids and compressed 1,1,1,2‐tetrafluoroethane (R‐134a)

Novel processes involving ionic liquids with refrigerant gases have recently been developed. Here, the complete global phase behavior has been measured for the refrigerant gas, 1,1,1,2‐tetrafluoroethane (R‐134a) and 1‐n‐alkyl‐3‐methyl‐imidazolium ionic liquids with the anions hexafluorophosphate [PF₆], tetrafluoroborate [BF₄] and bis(trifluoromethylsulfonyl)imide [Tf₂N] from ～0°C to 105°C and to 33 MPa. All of the systems studied were Type V from the classification scheme of Scott‐van Konynenburg with regions of vapor‐liquid equilibrium, miscible/critical regions, vapor‐liquid‐liquid equilibrium, and upper and lower critical endpoints (UCEP and LCEP). The effect of the alkyl chain length has been investigated, for ethyl‐([EMIm]), n‐butyl‐([BMIm]), and n‐hexyl‐([HMIm]). With increasing chain length, the temperature of the lower critical end points increases and pressure at the mixture critical points decrease. With a common cation, the temperature of the LCEP increased and the mixture critical point pressures decreased in the order of [BF₄], [PF₆], and [Tf₂N]. © 2008 American Institute of Chemical Engineers AIChE J, 2009     

Molecular insight into the effect of ion structure and interface behavior on the ammonia absorption by ionic liquids

Molecular dynamics simulations were performed to elucidate the roles of ion structure and interface behavior in absorption of gases (NH₃, N₂, H₂) by ILs (protic IL [Bim][Tf₂N] and conventional IL [Bmim][Tf₂N]). The results indicated that NH₃ compete with [Tf₂N]⁻ to interact with N3-H site of [Bim]⁺ cation, forming a strong N3 H∙∙∙N(NH₃) hydrogen bond with the energy of −79 kJ/mol, which is twice as much as the energy of the hydrogen bond between C2 H of [Bmim]⁺ and NH₃ (−33.2 kJ/mol). Moreover, there is a dramatic increase in the number density of cations near the IL-gas interface, resulting in the NH₃ molecules permeate into the bulk rapidly and effectively and achieving the high selective absorption of NH₃ to H₂ and N₂. Considering the inevitable trace water in the raw gases, the influence of water was studied and it was shown that trace water can enhance the absorption of NH₃ by [Bim][Tf₂N].     

Effect of Anions on the Extraction of Lanthanides (III) by N,N′‐Dimethyl‐N,N′‐Diphenyl‐3‐Oxapentanediamide

Abstract

The extraction of microquantities of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y by N,N′‐dimethyl‐N,N′‐diphenyl‐3‐oxapentanediamide (DMDPhOPDA) in 1,2‐dichloroethane from aqueous media containing ClO₄ ^?, PF₆ ^?, (CF₃SO₂)₂N^? anions or by DMDPhOPDA in 1,2‐dichloroethane in the presence of 1‐butyl‐3‐methylimidazolium bis[(trifluoremethyl)sulfonyl]imide ([C₄mim][Tf₂N]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) from HNO₃ solutions has been studied. The effect of HNO₃ concentration in the aqueous phase and that of the extractant concentration in the organic phase on the extraction of metal ions is considered. The stoichiometry of the extracted complexes has been determined. The addition of HPF₆ and (CF₃SO₂)₂NH or their salts to the aqueous HNO₃ or HCl solutions leads to an enchancement of lanthanides (III) extraction by DMDPhOPDA. A considerable synergistic effect was observed in the presence of ionic liquids (IL) in the organic phase containing DMDPhOPDA. This effect is connected with the hydrophobic nature of the IL anion. The distribution of ILs between the equilibrium organic and aqueous phases can govern the extractability of lanthanides (III) in DMDPhOPDA‐IL systems.     

Selective Separation of Toluene/n‐Heptane by Supported Ionic Liquid Membranes with [Bmim][BF4]

Room‐temperature ionic liquids serve as alternative solvents for volatile organic compounds in liquid‐liquid extraction and liquid membrane separation. 1‐Butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim][BF₄]) was applied for extraction and supported ionic liquid membranes (SILMs) to separate toluene and n‐heptane. A high separation factor of toluene was achieved due to the strong interaction between ionic liquid cations and toluene. The mass transfer performance of the SILM process was enhanced by higher operating temperature. With the increase of initial toluene concentration in the feed phase, the mass transfer flux and removal efficiency of the SILM process were improved, while the separation factor decreased. The mass transfer flux was growing with the increase of flow rate at both sides. The SILM process was stable over a long time period due to the high viscosity and low volatility of [Bmim][BF₄].     

Efficient and Eco‐Friendly Process for the Synthesis of Bis(1H‐indol‐3‐yl)methanes using Ionic Liquids

Indoles react smoothly with carbonyl compounds in 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄) or 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) ionic liquids under mild reaction conditions to afford the corresponding bis‐indolylmethanes in excellent yields. These ionic liquids can be recovered and recycled in subsequent reactions without any apparent loss of activity.     

1‐Butyl‐3‐methylimidazolium Tetrafluoroborate ([Bmim]BF4) Ionic Liquid: A Novel and Recyclable Reaction Medium for the Synthesis of vic‐Diamines

Aziridines undergo ring opening smoothly with various arylamines in 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄) or 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) ionic liquids under mild and neutral conditions to afford the corresponding vicinal‐diamines in excellent yields with high regioselectivity. The recovered activated ionic liquids are recycled for four to five runs with no loss of activity.     

Three‐Component One‐Pot Synthesis of α‐Hydroxylamino Phosphonates using Ionic Liquids

α‐Hydroxylamino phosphonates are synthesised in a one‐pot operation by three‐component coupling reactions of aldehydes, hydroxylamines and diethyl phosphite using 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄) or 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) ionic liquids under mild and neutral conditions. The recovered ionic liquids can be recycled for four to five runs without loss of activity.     

Ionic Liquid Confined in Nafion: Toward Molecular‐Level Understanding

In this article, multiscale simulation methods were used to study structural and transport properties of Nafion–ionic liquid composite membranes that are novel proton conducting materials for fuel cells. Coarse‐grained model for 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim][BF₄]) ionic liquid was first developed in the framework of BMW‐MARTINI force field. Coarse‐grained simulation results of bulk [bmim][BF₄] ionic liquid show good agreement with all‐atom simulation results and experimental data. Nafion–[bmim][BF₄] composite membranes were then simulated using all‐atom and coarse‐grained models. Ionic liquid cluster formation inside Nafion was revealed by coarse‐grained simulations. Diffusion coefficients of both [bmim]⁺ cations and anions are reduced by one to two orders of magnitude depending on their concentrations in Nafion membrane. [Bmim]⁺ cations have faster self‐diffusion coefficient than anions, while this phenomenon is more pronounced when ionic liquids are confined in Nafion. This work provides molecular basis for understanding Nafion–ionic liquid composite membranes. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2630–2639, 2013     

Influence of acetated‐based and bromo‐based ionic liquids treatment on wool dyeing with acid blue 7

Bromo‐based and acetated‐based ionic liquids (ILs), 1‐butyle‐3‐methylimidazolium bromo ([Bmim]Br), 1‐ethyl‐3‐mthylimidazolium bromo ([Emim]Br), 1‐butyle‐3‐methylimidazolium acetate ([Bmim]Ac), and 1‐ethyl‐3‐mthylimidazolium acetate ([Emim]Ac), were synthesized and employed for wool surface treatment. Scanning electron microscope results indicated that the wool surfaces treated with acetated‐based ILs were eroded more than those treated with bromo‐based ILs. Comparable studies showed that the wool samples treated with acetate‐based ILs, especially [Emim]Ac, had higher initial dyeing rate and equilibrium exhaustion than those with bromo‐based ILs. Along with treatment temperature and time increasing, acetate‐based ILs had more remarkable effects on mechanical and dyeing properties of the wool samples than bromo‐based ILs. The wool samples treated with [Emim]Ac at 60°C for 10 min had excellent low‐temperature dyeing properties. The color depth (K/S) investigations showed that the wool samples treated with acetate‐based ILs possessed darker color depth than those treated with the bromo‐based ILs. Color fastnesses of the wool samples treated with [Bmim]Br, [Emim]Br and [Bmim]Ac exhibited the same grades as the untreated sample, while wet color fastnesses of [Emim]Ac treated sample were slightly decreased. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Promoted adsorption of CO2 on amine‐impregnated adsorbents by functionalized ionic liquids

Amine‐impregnated adsorbents are promising alternatives to aqueous amines for CO₂ capture. However, the diffusion‐controlled CO₂ adsorption process is a significant issue associated with them, resulting in the insufficient utilization of amine groups. Herein, we propose the use of functionalized ionic liquids 1‐ethyl‐3‐methylimidazolium acetate ([emim][Ac]) with chemical reactivity to CO₂ and low viscosity as the additive to amine‐impregnated adsorbents. The key is that [emim][Ac] does not show drastic increase in viscosity after reacting with CO₂. Taking the polyethyleneimine (PEI)‐impregnated SBA‐15 as a model system, it is found that the CO₂ capacities of PEI/SBA‐15 composites are improved by 86%, and the active site efficiencies are improved by 270%, after the addition of [emim][Ac]. The addition of [emim][Ac] to PEI/SBA‐15 composites also helps improve the CO₂ adsorption rate and recycling stability of composites. Therefore, [emim][Ac] offers the opportunity to fabricate amine‐impregnated adsorbents with simultaneously improved CO₂ capacities, adsorption kinetics, and recycling stability. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3671–3680, 2018     

Physical gels of [BMIM][BF4] by N‐ tert‐butylacrylamide/ethylene oxide based triblock copolymer self‐assembly: Synthesis,thermomechanical, and conducting properties

We report a strategy to prepare and characterize mechanically robust, transparent, thermoreversible physical gels of an ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [BMIM][BF₄], to harness its good ionic conductivity and electrolytic properties for solid‐state electrolyte and lithium ion battery applications. Physical gels are prepared using a triblock copolymer comprising central polyethylene oxide block that is soluble in [BMIM][BF₄] and the end blocks, poly(N‐tert‐butylacrylamide), that are insoluble in [BMIM][BF₄]. Transparent, strong, physical ion‐gels with significant mechanical strength can be formed at low concentration of the triblock copolymer (～5 wt %), unlike previous reports in which chemical gels of [BMIM][BF₄] are obtained at very high polymer concentration. Our gels are thermoreversible and thermally stable, showing 1–4% weight loss up to 200°C in air. Gelation behavior, mechanical properties, and ionic conductivity of these ion‐gels can be easily tuned by varying the concentration or N‐tert‐butylacrylamide block length in the triblock copolymer. These new non‐volatile, reprocessable, mechanically robust, [BMIM][BF₄]‐based physical ion‐gels obtained from a simple and convenient preparation method are promising materials for solid‐state electrolyte applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013