Novel 3-D urchin-like Ni– Co–W porous nanostructure as efficient bifunctional superhydrophilic electrocatalyst for both hydrogen and oxygen evolution reactions

Fabrication of an electrocatalyst with remarkable electrocatalytic activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for the production of hydrogen energy. In this study, Ni–Co–W alloy urchin-like nanostructures were fabricated by binder-free and cost-effective electrochemical deposition method at different applied current densities and HER and OER electrocatalytic activity was studied. The results of this study showed that the microstructure and morphology are strongly influenced by the electrochemical deposition parameters and the best electrocatalytic properties are obtained at the electrode created at the 20 mA.cm⁻²applied current density. The optimum electrode requires −66 mV and 264 mV, respectively, for OER and HER reactions for delivering the 10 mA cm⁻² current density. The optimum electrode also showed negligible potential change after 10 h electrolysis at 100 mA cm⁻², which means remarkable electrocatalytic stability. In addition, when this electrode used as a for full water splitting, it required only 1.58 V to create a current density of 10 mA cm⁻². Such excellent electrocatalytic activity and stability can be related to the high electrochemical active surface area, being binder-free, high intrinsic electrocatalytic activity and hydrophilicity. This study introduces a simple and cost-effective method for fabricating of effective electrodes with high electrocatalytic activity.     

Flower-like HEA/MoS2/MoP heterostructure based on interface engineering for efficient overall water splitting

The development of cheap, efficient, and active non-noble metal electrocatalysts for total hydrolysis of water (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is of great significance to promote the application of water splitting. Herein, a heterogeneous structured electrode based on FeAlCrMoV high-entropy alloy (HEA) was synthesized as a cost-effective electrocatalyst for hydrogen and oxygen evolution reactions in alkaline media. In combination of the interfacial synergistic effect and the high-entropy coordination environment, flower-like HEA/MoS₂/MoP exhibited the excellent HER and OER electrocatalytic performance. It showed a low overpotential of 230 mV at the current density of 10 mA cm⁻² for OER and 148 mV for HER in alkaline electrolyte, respectively. Furthermore, HEA/MoS₂/MoP as both anode and cathode also exhibited an overpotential of 1.60 V for overall water splitting. This work provides a new strategy for heterogeneous structure construction and overall water splitting based on high-entropy alloys.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

N-doped carbon wrapped CoFe alloy nanoparticles with MoS2 nanosheets as electrocatalyst for hydrogen and oxygen evolution reactions

Developing efficient and cost-effective transition metal-based electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial to generate clean and renewable hydrogen energy. The construction of hybrid catalysts with multiple active sites is an effective approach to promote catalytic performance. Herein, a molybdenum disulfide (MoS₂)-based hybrid with N-doped carbon wrapped CoFe alloy (MoS₂/CoFe@NC) was synthesized through a typical hydrothermal method. The MoS₂/CoFe@NC exhibits excellent electrocatalytic performance with overpotentials of 172 mV for HER and 337 mV for OER at 10 mA cm⁻², and long-term stability of 24-h electrolytic reaction in 1 M KOH solution. The chemical coupling between MoS₂ and CoFe@NC provides improved electronic structures and more accessible active sites. The CoFe@NC substrate accelerates the charge transfer to MoS₂ through a synergistic effect. This work demonstrates that the CoFe@NC is a promising substrate for depositing MoS₂ nanosheets (NSs) to achieve excellent catalytic performance for both HER and OER.     

Three-dimensional interconnected MoS2 nanosheets on industrial 316L stainless steel mesh as an efficient hydrogen evolution electrode

The development of inexpensive and competent electrocatalysts for high-efficiency hydrogen evolution reaction (HER) has been greatly significant to realize hydrogen production in large scale. In this paper, we selected the inexpensive and commercially accessible stainless steel as the conductive substrate for loading MoS₂ as a cathode for efficient HER under alkaline condition. Interconnected MoS₂ nanosheets were grown uniformly on 316-type stainless steel meshes with different mesh numbers via a facile hydrothermal way. And the optimized MoS₂/stainless steel electrocatalysts exhibited superior electrocatalytic performance for HER with a low overpotential of 160 mV at 10 mA cm⁻² and a small Tafel slope of 61 mV dec⁻¹ in 1 M KOH. Systematic study of the electrochemical properties was performed on the MoS₂/stainless steel electrocatalysts in comparison with the commonly used carbon cloth to better comprehend the origin of the superior HER performance as well as stability. By collaborative optimization of MoS₂ nanosheets and the cheap stainless steel substrate, the interconnected MoS₂ nanosheets on stainless steel provide an alternative strategy for the development of efficient and robust HER catalysts in strong alkaline environment.     

Graphene oxide decorated nickel-cobalt nanosheet structures based on carbonized wood for electrocatalytic hydrogen evolution

Nickel-based materials exhibit great potential in the field of hydrogen evolution reaction (HER), however, the low catalytic active site and poor corrosion resistance still limit further application. Herein, a novel 3D self-supporting electrode of graphene oxide/nickel-cobalt/carbonized wood (GO/Ni–Co/CW) based on porous carbon is developed. The self-supporting structure of the electrode effectively prevents the shedding of catalytic materials, while the exposed active sites of the Ni–Co nanosheets ensure excellent catalysis and the decoration of GO further enhances the HER performance. Evidently, GO/Ni–Co/CW requires an overpotential of 52 mV in 0.5 M H₂SO₄ and 70 mV in 1 M KOH to achieve a current density of 10 mA cm⁻². Furthermore, the introduction of GO greatly improves the stability performance of the electrode due to its corrosion resistance, as found by the catalytic stability performance test. As a new idea, GO decorated Ni–Co nanosheets grown on wood-based porous carbon as electrodes fully combine and exploit the advantages of CW's 3D porous structure, Ni–Co nanosheets' catalytic activity, and GO's corrosion resistance, which provide an effective strategy for novel nickel-based HER electrocatalysts.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Self-standing and efficient bifunctional electrocatalyst for overall water splitting under alkaline media enabled by Mo1-xCoxS2 nanosheets anchored on carbon fiber paper

The layered MoS₂ nanostructures have been widely used in the electrochemical hydrogen evolution reaction (HER), but rarely applied in overall water splitting application for their ignorable oxygen evolution reaction (OER) activity. To address this issue, a novel self-standing and bifunctional electrocatalyst, consisting of Co-doped MoS₂ nanosheets anchored on carbon fiber paper, has been prepared via hydrothermal method. Taking advantage of conductive substrate of carbon fiber paper, sufficient-exposed active edges of MoS₂ sheets, and metallic character caused by Co-doping, our electrode exhibits high-efficient bifunctional activities for the overall water splitting in alkaline electrolyte (1 M KOH), which can produce a current density of 20 mA cm⁻² at an overpotential of 197 mV for HER and 235 mV for OER.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

Tunably fabricated nanotremella-like Bi2S3/MoS2: An excellent and highly stable electrocatalyst for alkaline hydrogen evolution reaction

Reasonable design of efficient and stable catalysts with low cost and abundant natural reserves is vital for electrocatalytic water splitting. Herein, novel nanotremella-like Bi₂S₃/MoS₂ composites with different mass ratios between Bi₂S₃ and MoS₂ have been successfully prepared through a hydrothermal approach and further applied to hydrogen evolution reaction (HER) in 1.0 M KOH electrolyte for the first time. When the mass ratio of Bi₂S₃ and MoS₂ is 5:5, as-prepared nanotremella-like Bi₂S₃/MoS₂ (marked as BMS-5) manifests favorable HER catalytic activity with overpotential of 124 mV at current density of 10 mA cm⁻² and relatively low Tafel slope of 123 mV dec⁻¹. Moreover, it exhibits an extraordinary durability for uninterrupted hydrogen generation. The enhanced HER performances are ascribed to the synergistic effects between Bi₂S₃ and MoS₂, giving rise to large electrocatalytic active area and fast HER kinetics. The results pave a new path to design and construct excellent Bi₂S₃/MoS₂ nanomaterials for electrocatalytic hydrogen generation.     

Multi-shelled CoS2–MoS2 hollow spheres as efficient bifunctional electrocatalysts for overall water splitting

The exploration of highly efficient non-precious electrocatalysts is essential for water splitting devices. Herein, we synthesized CoS₂–MoS₂ multi-shelled hollow spheres (MSHSs) as efficient electrocatalysts both for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) using a Schiff base coordination polymer (CP). Co-CP solid spheres were converted to Co₃O₄ MSHSs by sintering in air. CoS₂–MoS₂ MSHSs were obtained by a solvothermal reaction of Co₃O₄ MSHSs and MoS₄²⁻ anions. CoS₂–MoS₂ MSHSs have a high specific surface area of 73.5 m²g^-1. Due to the synergistic effect between the CoS₂ and MoS₂, the electrode of CoS₂–MoS₂ MSHSs shows low overpotential of 109 mV with Tafel slope of 52.0 mV dec⁻¹ for HER, as well as a low overpotential of 288 mV with Tafel slope of 62.1 mV dec⁻¹ for OER at a current density of 10 mA cm⁻² in alkaline solution. The corresponding two-electrode system needs a potential of 1.61 V (vs. RHE) to obtain anodic current density of 10 mA cm⁻² for OER and maintains excellent stability for 10 h.     

Ru–MoS2@PPy hollow nanowire as an ultra-stable catalyst for alkaline hydrogen evolution reaction

Electrocatalytic hydrogen evolution reaction (HER) is one of the green and effective method to produce clean hydrogen energy. However, the development of non-Pt HER catalysts with excellent catalytic activity and long-term stability still remains a great challenge. Herein, a vertically aligned core-shell structure material with hollow polypyrrole (PPy) nanowire as a core and Ru-doped MoS₂ (Ru–MoS₂) nanosheets as a shell is firstly reported as a highly efficient and ultra-stable catalyst for HER in alkaline solutions. Results indicate that Ru–MoS₂@PPy catalyst demands a low overpotential of 37 mV at 10 mA cm^?2. In addition, the overpotential at 100 mA cm^?2 is 157 mV and it is almost unchanged after 40,000 cyclic voltammetry cycles. The existence of PPy core not only ensures the vertical growth of MoS₂ nanosheets to expose more edge sites, but also promotes the rapid transfer of electrons, contributing to the improvement of catalytic activity. More importantly, the strong interface interaction between MoS₂ and PPy prevents the collapse of the vertical structure of MoS₂ sheets in the electrocatalytic process and greatly enhances the stability of catalysts, which offers an effective strategy to design and synthesize the HER catalysts with superior catalytic stability.     

Quick-to-synthesize hybrid electrodes composed of activated carbon cloth with Co/Fe-based films as bifunctional electrocatalysts for water splitting

Hybrid electrodes have recently been investigated as attractive alternatives to noble-metal-based electrocatalysts for hydrogen production by water splitting. Herein, we propose an electrode composed of an oxidized carbon cloth with an electrodeposited bimetallic Co/Fe-based film. By optimizing the electrodeposition conditions and applying electrochemically activated carbon cloth as a substrate, one can prepare a free-standing noble-metal-free electrocatalytic electrode with high bifunctional electrocatalytic activity in hydrogen and oxygen evolution from alkaline solution. The developed Fe_0.25Co_0.75 electrode requires overpotentials of 245 mV for HER and 360 mV for OER at high current densities of −100 and 100 mA cm⁻², respectively. Furthermore, its overall synthesis time from commercially available raw materials is only approximately 20 min. The electrode material was used as both a cathode and an anode in the model electrolyzer, which can deliver 10 mA cm⁻² of current density at 1.66 V without loss of activity during 100 h of performance.     

Engineering of molybdenum sulfide nanostructures towards efficient electrocatalytic hydrogen evolution

Water splitting is an appealing way of producing hydrogen fuel, which requires efficient and affordable electrode materials to make the overall process viable. In the last couple years, abundant transition metals (and their compounds and hybrids) attracted ever-growing attention as the alternatives of noble metals. Particularly the layered transition metal dichalcogenide (TMDs) are interesting with their stability and promising electrocatalytic performance for hydrogen evolution reaction (HER). However, the neat TMDs are often poor in terms of the abundance of catalytically active sites and electrical conductivity, which limit their application potential significantly. Herein, as a proof-of-concept, we report on the design of a high-performance electrocatalyst system formed by the decoration of ultrasmall molybdenum sulfide (MoS₂) nanosheets on carbon nanotubes (CNTs). The ultrasmall MoS₂ nanosheets provide distorted lattice, confined size and rich defects, which endows the resulting electrocatalysts (MoS₂/CNT) with abundant active sites. The CNTs, on the other hand, serve as the conductive net for ensuring electrocatalytic performance. As a result, the hybrid electrocatalyst exhibits excellent electrocatalytic performance for HER, achieving a large current density of 100 mA cm⁻² at overpotential of only 281 mV and a small Tafel slope of 43.6 mV dec⁻¹ along with a decent stability. Our results are of high interest for electrocatalyst technologists as well as hydrogen fuel researchers.     

Electrodeposition of Ni–Fe–Mn ternary nanosheets as affordable and efficient electrocatalyst for both hydrogen and oxygen evolution reactions

The synthesis of high performance and economical electrocatalysts in the process of overall water splitting is very important for the production of hydrogen energy and has become one of the most important challenges. Here, various Ni, Ni–Fe, Ni–Mn nanosheets and Ni–Fe–Mn ternary nanosheets were created using cost-effective, versatile and binder-free electrochemical deposition methods, and the electrocatalytic activity of various electrodes for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were investigated in an alkaline environment. Due to the high electrochemical active surface area due to the fabrication of nanosheets, the synergistic effect between different elements on the electronic structure, the high wettability due to the formation of nanosheets and the quick detachment of formed gasses from the electrode, the Ni–Fe–Mn nanosheets electrode showed excellent electrocatalytic activity. In order to deliver the 10 mA cm⁻² current density in HER and OER processes, this electrode required values of 64 mV and 230 mV overpotential, respectively. Also, the stability test showed that after 10 h of electrolysis at a current density of 100 mA cm⁻², the overpotential changes was very small (less than 4%), indicating that the electrode was excellent electrostatic stability. Also, when using as a bi-functional electrode in the full water splitting system, it only needed a cell voltage of 1528 V to deliver a current of 10 mA cm⁻². The results of this study indicate a new strategy for the synthesis of active and stable electrocatalysts.     

Fabrication of phosphorus-mediated MoS2 nanosheets on carbon cloth for enhanced hydrogen evolution reaction

Molybdenum sulfide (MoS₂) as a graphene-like sheet material has attracted wide attention owing to the potential for hydrogen evolution reaction (HER). However, the large-scale application of MoS₂ is still difficult due to the inherent poor conductivity and insufficient active edge sites. Herein, we develop a simple method to grow P-doped MoS₂ nanosheets on carbon cloth for high efficiency HER. The 2D carbon cloth can prevent the stacking of MoS₂ nanosheets and improve the conductivity with the doping of P atoms. As a result, the P–MoS₂/CC-300 shows the excellent electrocatalytic activity with an overpotential of 81 mV at 10 mA cm^?2 and the lower Tafel slope of 98 mV/dec. Furthermore, it also shows the good electrocatalytic durability for 15 h. This work provides an opportunity for the design of excellent and robust MoS₂-based catalyst via structural engineering and doping method.     

Phosphorus-doping induced electronic modulation of CoS2–MoS2 hollow spheres on MoO2 film-Mo foil for synergistically boosting alkaline hydrogen evolution reaction

Combination of anionic doping and multicomponent synergism are effective approach to improve the performance of electrocatalysts toward hydrogen evolution reaction (HER) process. Herein, P-doped CoS₂–MoS₂ hollow spheres assembled by countless sheets on oxidized Mo foil (P–CoS₂/MoS₂/MoO₂) was synthesized by hydrothermal and phosphorization process. The unique hollow structure with countless sheets as wall endows more accessible active sites, fast electron/mass transport and high conductivity. P-doping could redistribute the local charge density and optimize the surface charge state to improve the intrinsic activity and accelerate reaction kinetics. The optimized P–CoS₂/MoS₂/MoO₂ exhibits an outstanding HER performance with an overpotential of 85 mV to reach 10 mA cm⁻², a small Tafel slope of 84.6 mV dec⁻¹, superior intrinsic HER activity and robust durability under alkaline solution. This work proposed a feasible strategy to build the hollow, heterostructured and binder-free electrode in renewable energy application.     

Graphene confined MoS2 particles for accelerated electrocatalytic hydrogen evolution

MoS₂ is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction. Extensive trials have been carried out to increase its low electrical conductivity and insufficient active sites. Here, a remarkable electrocatalyst for hydrogen evolution is developed based on the in-situ preparation of MoS₂ confined in graphene nanosheets. Graphene effectively controls the growth of MoS₂ and immensely increases the conductivity and structural stability of the composite materials. Remarkably, because of the plentiful active sites, sufficient electrical contact and transport, MoS₂ particles confined in graphene nanosheets exhibit an onset overpotential as small as 32 mV, an overpotential approaching 132 mV at 10 mA cm⁻², and a low Tafel slope of 45 mV dec⁻¹. This work presents a reasonable architecture for practical applications in efficient electrocatalytic H₂ generation.     

One-step electrodeposition of cauliflower-like Ni–Fe–Sn particles as a highly-efficient electrocatalyst for the hydrogen evolution reaction

Herein, a Ni–Fe–Sn coating was synthesized in-situ on Ni mesh by one-step electrodeposition at different durations. The Ni–Fe–Sn60 electrode obtained after 1 h deposition exhibits cauliflower-like morphology and the best electrocatalytic properties for the hydrogen evolution reaction (HER) compared to other electrodes. The electrode requires an overpotential of 43 mV at a current density of 10 mA cm⁻² and a small Tafel slope of 70 mV dec⁻¹ in a 1 M KOH solution. Moreover, the electrode shows outstanding stability in prolonged electrolysis and overall water splitting performance, generating a current density of 93 mA cm⁻² at 1.8 V, which is thrice that of an industry electrode. This electrocatalytic activity is ascribed to the high active surface area produced by the cauliflower-like Ni–Fe–Sn particles and the synergistic interaction of Ni, Fe and Sn. The simple synthesis method and excellent performance endow this electrode with great potential for large-scale applications.